CSA for ICM/IPCC and SQL Backup Wizard

Similar Questions

• CSA for ICM questions

  I'm currently building ICM 7.0 in an isolated area. We have a total of eight servers. Two servers are domain controllers (no ICM component on domain controllers) and I already have built DC. I can't find in any of the documents on the installation of the CSA on the domain controllers. Should I install CSA on domain controllers? If so, should I wait until all the components of the MHI are installed on member servers?

  CSA is reserved for specific cisco software, not for the domain controllers that are just windows. For all the servers that have components of the CIM, you can install CSA

• stop and start sequence for DL2000 MD1000 and TL2000 backup devices

  IM moving my backup devices and would like to get feedback on the Bay sequence of stop and start for my Dell DL2000, storage server MD1000 and TL2000 tape backup devices.  In what order should I stop and start?

  Thank you

  Hello mojogar,

  You will be required to turn off Tin the following order:

  Shutdown

  1 TL2000

  2 DL2000

  3 MD1000

  Startup

  1 MD1000

  2 TL2000

  3 DL2000

  Please let us know if you have any other questions.

• Xmarks is functional? It didn't work for a week and the installation wizard does not work.

  The last time worked Xmarks was on 25 October. I am connected correctly and it tries to synchronize, but never finished. Even the Xmarks Setup Wizard does not work. It is a very useful addon in the past one I hope he'll return to work.

  I had this problem too. I'm running Firefox 25.0 and used Xmarks 4.2.1. Sync would not end. I downloaded Xmarks 4.2.3 from Xmarks web site (not the site of Mozilla Add-ons that apparently has 4.2.1) and now everything looks OK.

  Mark

• I stop VirtualCenter for SQL backup?

  Hi all

  Discovered today that my VirtualCenter log file grows to the point where I have to look it narrows down.  Got about 20% free atm of disk space so don't not massivly urgent but I would it nip in the bud now.

  I thought in a SQL Backup/Shrink in market, I am currently using SQL 2008 Standard 64-bit, with it taking all the vCenter install default options so full recovery mode.  I haven't used much before SQL2008 so did a quick browse forums here where there was something specific I need to do and I have a question.

  I have to stop the VirtualCenter service in order to obtain a copy of backup performed via SQL?  I could not but but I seem to have found a few posts suggesting this?

  If so, how I would go about planning for backups nightly full SQL that will keep my log SQL size down, if I have to stop to vCenter every night?

  Thank you

  Andy

  .. .and I advise you to run in simple mode rather than the full recovery and maintenance of DB, such as the purge and the re-indexing on a regular basis.  But, as mentioned, if do something other than backups, the instance must be down.

• Wizard Boot Camp is stuck at "Download windows software support...". "0 minutes 0 seconds remaining (for 48 hours and more) ' for Windows 10 Pro

  Wizard Boot Camp is stuck at "Download windows software support...". "0 minutes 0 seconds remaining (for 48 hours and more) ' for Windows 10 Pro.

  I did Boot Camp with 8,1 this system successfully but the upgrade of Windows 10 dorked BootCamp upward when it is added to the system partition.  Has had a lot of work, but ultimately got all partitions disappeared and I tried Boot Camp and got it.  I erased the disc and then reinstalled El Capitan sweet factory without bringing more parameters.  Now, I still get the same error?

  I tried a few sizes of ~ 50 to 170 G with no luck.  It's on a MBP 2016 15 "with retina, 512G SSD, 16G RAM, GPU display.

  Any suggestions?  Troubleshooting?  I can't yet find/say if this thing creates something useful for a log file or?

  1. you download Windows Support software on a wireless connection? If so, try a connection cable, if possible.

  2. Please look in Applications-> utilities-> Console logs for error messages.

• What a SQL Server would cost for a medium and large company?

  I am researching the cost of SQL for a medium and large business, allowing access to their users. I have priced at the State for everything but I can't find anything online. Someone would help me please on my business. I don't know too much about this topic and I'm looking to improve my results for the class that I am. Any help would be appreciated.

  original title: search SQL

  Hi Sam O'Day,.

   

   

  I wish you post your question in the TechNet Forums because it caters to an audience of it professionals.

   

  Check out the link-

  TechNet forums

   

   

  Hope this helps!

   

• For TMS Win2008 Server and SQL Server client access licenses?

  Where, I read that the TMSXE interface requires a CAL on the Exchange Server.  What I can't seem to locate is all information about client access licenses how are required to Win2008 R2 Server Standard Edition and SQL Server 2008 R2 Standard.  Is there a reference document that I'm missing with this information.  It seems that according to Microsofts definitions, you might need a CAL by user device and/or managed web that connects to the web interface.

  Can someone clarify the situation?

  Hello world

  So should put the closure of this thread, I have now clarified what follows when it comes to TMS and MS licenses:

  Users and administrators to connect to TMS authenticate AD, the server that hosts the TMS must be allowed to support authenticated connections. Don't authenticate TMS Managed/configure with AD devices via the web server. As a result, and as managed devices does not authenticate against IIS with AD login, these types of connections don't require licenses. Only users who connect to the Web site would be.

  The issue of Exchange and SQL are similar, that is, authenticated connections how are made?

  Of MSDS, all connections to SQL server use the same authenticated account, by default uses a SQL login.  Web site users are not authenticated to SQL Server. Therefore, and in the case of an external SQL Server, this would be equal to one.

  When communicating with Exchange, all connections are through a unique service account. Created for managed systems the mailboxes are not connected by users or MSDS for normal operation. As a result, and as with an external SQL Server, this would be also equal to one.

  Hope that clarifies completely now

  Rgds,

  Dale

• PDF IFilter support for 8.1 Windows and SQL Server 2014

  Hello

  We use Adobe PDF iFilter Version 64 11.0.01 (here: https://www.adobe.com/support/downloads/detail.jsp?ftpID=5542) full-text support for PDF files on SQL Server and Windows Server 2012 2012. This works also on Windows Server R2 from 2012 to 2014 of SQL-Server even if both is not listed in the list of the applications/OS supported. But it does not work for the combination of 8.1 to Windows and SQL-Server, 2014.

  Can anyone provide a solution to make it work for this combination, or know when it will be officially supported?

  Kind regards

  Stefan

  Hi stefankainz663,

  Please see this KB for the workaround iFilter PDF search doesn't work on Windows 8 x 64.

  Kind regards
  Nicos

• How to find sizes backupset for full and incremental backups

  How can I get the exact sizes of backupsets, full and incremental backups RMAN? In addition, it would be nice to separate the backupset size in data and archiving logs files.

  Don't know exactly what you can include in your output, but the following is an example:

  SQL> select ctime "Date"
    2       , decode(backup_type, 'L', 'Archive Log', 'D', 'Full', 'Incremental') backup_type
    3       , bsize "Size MB"
    4  from (select trunc(bp.completion_time) ctime
    5          , backup_type
    6          , round(sum(bp.bytes/1024/1024),2) bsize
    7     from v$backup_set bs, v$backup_piece bp
    8     where bs.set_stamp = bp.set_stamp
    9     and bs.set_count  = bp.set_count
   10     and bp.status = 'A'
   11     group by trunc(bp.completion_time), backup_type)
   12  order by 1, 2;
  
  Date      BACKUP_TYPE    Size MB
  --------- ----------- ----------
  03-JUL-10 Archive Log       7.31
  03-JUL-10 Full             29.81
  03-JUL-10 Incremental    2853.85
  04-JUL-10 Archive Log       3.59
  04-JUL-10 Full              7.45
  04-JUL-10 Incremental       3.05
  
  6 rows selected.
  

• What is the need for level 0 and level 1 backup?

  I am a bit confused about the need for level 0 and level 1 backup. Oracle has proposed strategy in 10g creates only level 1 backup continues to not to break and not to create any level of 0 after the first backup of level 0. But I had seen in the document Oracle Database Backup & Recovery basis he suggests to create backup of level 0 on weekly or monthly basis. There?
  
  Secondly according to my understanding when creating oracle backup of level 1 first creates a level 0 backup that contain also copies of data image files and then apply an incremental copies of the image, once the incremental backup is applied on the copy of the image you don't have to the previous incremental backups. Am I wrong?
  If I'm right, what is the difference between level 0 & backup of level 1? and after the level 0 backup you must also all previous backups.
  
  PL. help me to clarify my questions in this regard.
  
  Kind regards
  
  Vassallo

  What is the most reliable in terms of recovery?

  I do not see the differences in terms of recovery, the two strategies are reliable.

  There is an advantage in terms of recovery time expected, Oracle says:

  /*
  Incorporate gradually update the backup in your backup strategy shortens the time of recovery as provided. The reason is that media recovery right now or at some point in the recent past may begin at the time of the last backup of level 1 applied, rather than at the time of the last full database backup.
  */

  In a regular incremental backup strategy you always go back to a level 0 backup and then to apply everything follows level 1 backups + archivelogs. But - for an incremental backup set to day - it's a little tricky to emerging a window of recovery, normally relies on redundancy 1, i.e. that a backup is retained, you cannot go back, this type of backup is designed for a quick and complete recovery.

  But there is a solution (I don't think there is place in EM), even if you're on 10g, see the 11 g documentation, he explains fuller:

  http://download.Oracle.com/docs/CD/B28359_01/backup.111/b28270/rcmbckba.htm#BRADV89532

  Werner

• Tools for follow-up and backup/restore for databases of TT

  Hello
  
  I'm new to TimesTen. I need to set up an automatic tracking of databases of TT. There all the tools available? Also would like to know if he has all the tools for tracking backups for these data stores.
  
  All standards and best practices to manage the available TimesTen environment?
  
  Appreciate any help/advice.
  
  Concerning

  There not really tools for automated tracking backups of data store. TimesTen data store must only be saved using the provided tool ttBackup or the utility equivalent API function. backup files by any means datatsore will result in an inconsistent backup that very probably cannot be successfully restored. The output produced by the ttBackup command files can themselves be saved to help and the usual ways. TimesTen supports full and incremental backups and any given data store can have up to 8 incremental backup simultaneously active separate sets for her. Some information about these backup sets can be obtained in ttLogHolds procedure (this will show the hold position paper corresponding to each active incremental backup set) using the. In addition, the procedure of builtin ttBackupStatus provides information on the last performed backup. See the documentation for more details on these procedures.

  Regarding the monitoring of TimesTen, this is usually done via scripts or a custom application (C, C++, or Java). The scripts are generally not recommended because they will have to constantly connect and disconnect the data store and which is an expensive operation that can degrade the performance of the system if done too often. The recommended approach is to write a program of personalized follow-up that remains connected to the data store and executes the tasks of different monitoring according to the needs. A simple example of such a program is the C++ ttMonitor demo program in the directory of your install TimesTen ttclasses demo.

  There are 3 main areas that must be inspected systematically:

  1 basic data
  2. the replication
  3 cache connect

  Of course, if you are not using replication, then you don't need to exercise supervision. Same thing for the Cache to connect.

  As to what should be monitored, it is quite a large area and probably too much to post here. If you provide your email address, I can send you a book white PDF iscusses this in detail.

  Chris

• Where is the best place to find information on the new version of product releases for Windows, Internet Explorer and SQL Server?

  Hi, we would like to ensure that we are aware and actively involved in the preparation and planning in support of our product lines using the newest and the most innovative platforms and those whose primary Microsoft - Windows, Internet Explorer and SQL Server products and would like to find the best and most reliable way to receive alerts about new products , version beta and official release information notification automatically either by subscription or other alert.

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Add Hardware Wizard asking to install drivers for the keyboard and mouse.

  Original title: Assistant material is locking up my computer...

  Assistant adding hardware asks me to install the drivers for the keyboard and mouse however, it locks the computer and I can't type or click on anything whatsoever.  If I go into the set-up menu to reboot, the keyboard works fine.  How can I stop this from happening?

  I was able to run an analysis of the system through the establishment and who has solved the problem of mouse enough to do what else to do to solve the problem.

  Thank you for your reply and your help.

• Disable the contacts Backup Wizard

  I am not too impressed with the way Backup Wizard works he changes my contacts and carefully their mess up adding names until the last and double them, I use google contacts and it works fine I really made a mistake to the activation of this how can I turn it off?

  Droid Razr Maxx

  under settings > accounts > Phone Backup Assistant > and disable it. However you will still see function in your manager aloong of task than the other points that you have not setup as IM, weather, news, but if you turn it off, it will not be synchronized.

  I also agree with you on the use of Google and have never actually setup this service at all because it is already part of the Android OS. I really believe that it is very convenient for those who aren't quite cranky and maybe coming from a dumb phone and need to get their contacts on their Android and they have saved their previous phone with her.