I stop VirtualCenter for SQL backup?

Similar Questions

• stopped working for some backup devices

  I installed 6 switches SF300 - 24 p and gave them IP addresses static admin.  Initially, they are automatically recognized by ON100 and had the device driver and icon, etc.  They were also back up files of config based on credentials, that I gave to the web port 80 access.  I could even push the new firmware for them.

  I struggled with the switches and they were restarting several times a day, so I upgraded and plant their default and reprogrammed by hand.  Same configs, same IP address, etc.  I rediscover the edge network and we found them once again and I got the credentials, but now the backup for all 6 switches button is gray and they aren't automatically backup OU configs.

  I don't know what else to try to get these working properly again.

  Hi Brandon,.

  You can check if you have enabled "SNMP Service" on the switch? It's under ' Services TCP/UDP ", see below:

  

  If SNMP is enabled on the device, then OnPlus must use SNMP to communicate with the device. If this option is enabled, you can disable SNMP, or to provide information for the identification of SNMP.

  SF300 Notes:

  Note that if SNMP is enabled on the device, OnPlus must must use SNMP to communicate with the device.

  This can also lies in the Guide of the user, page 240:

  http://www.Cisco.com/en/us/docs/net_mgmt/other_net_mgmt/onplus/Portal/user_guide/onplus_portal_user_guide_7820144.PDF

  If SNMP is not enabled, send me the name of the site, and I can collect additional troubleshooting site logs.

  Thank you

  The OnPlus team

• CSA for ICM/IPCC and SQL Backup Wizard

  I have CSA for ICM (version 4.5 - 1 build 639) installed on all our servers to the ICM. It prevents SQL to make its backups to a network share. I stop the CSA and backups work fine. Thus, the permissions aren't too bad on the share drive. The backup works fine if the backup is created locally, is not a better practical backup strategy.

  Does anyone know of a work around?

  Thank you

  Stu

  the CSA managed product will work without problem. You can customize the policy to work with any backup software.

  Please evaluate the useful messages.

• SECURITY UPDATE for SQL SERVER 2005 SERVICE PAK (KB970892) FAILURE CODE 7358__I am not able to complete the update above.

  UPDATE OF SECURITY FOR SQL SERVER 2005 SERVICE PAK (KB970892) HAS NO CODE 7358
  WINDOWS _00007358 WINDOWS UPDATE _dt000 UPDATE

  I'm not able to finish the update above.  When I try to turn off my cell phone, that the process is delayed because the computer tries to update and it is frustrating to wait the update complete error 7358.

  Can it be fixed or can I delte this update to stop the delay to stop him?

  See the section "How to get help" of http://support.microsoft.com/kb/970892

  For individuals, please visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Security customer includes home links page free security update support, too
  https://consumersecuritysupport.Microsoft.com/

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site: http://support.microsoft.com/common/international.aspx

  For enterprise customers, support for security updates is available through your usual support contacts.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• What is normal for the backup of XP SP3 and the startup type of the removable storage service?

  I was getting ready to plan and attempt a clean full backup for tonight.  I have the backups created on several entities, currently backup but have a very stable system at the moment and wanted to try to make a clean backup file.  That day has finally arrived after been forced a corrupted system files hard drive failure "repair" critical and forced me to go back to SP1a (my Windows Genuine valid CD which I highly appreciate) in order to obtain any boot system, including safe mode and console mode.  Repair has presented many incompatibilities at the level of program and system, including the basic WMI and COM of the corruption system.  Three months later... it of time to update my backups and recovery procedures and hope that this does not happen!

  In preparation, I decided to refresh my memory on the use of the backup and by browsing the Help and Support Service Center files.  One of the first things I noticed was "storage removable service must be started for the backup works correctly."  Audit and inspection of my existing Services using computer (Local) management, I have observed that after a normal windows startup, the removable storage service is not started with manual startup type.  I use a USB drive connected as my backup media, and it is fully operational as a normally formatted NTFS data disk volume.  I have windows indexing disabled on this volume.  Is the type of service required removable storage of normal manual started?  The backup program will automatically start this service?  I know I've never manually started it myself and backups seem to work well.  Should we change the startup type to automatic?

  -Thanks, Jerry

  I would like to leave as a textbook.

  The Service will start (if capable) as soon as ntbackup.exe begins.

  If you want to see, with your Services window related to the function of RS place and it will not work and the manual.

  Click Start, run and enter in the box:

  Ntbackup.exe

  Click OK to start the backup and the Restore Wizard.

  Go back to your Services window and press F5 to refresh and SR Service should now work.

  When you exit the backup and the Restore Wizard, the RS Service stops (it may take a few minutes), and you may need to close the Services applet and reopen it to notice she's moved to manual and not running.

  You will see things like present to the event system log viewer:

  Event type: Information
  Event source: Service Control Manager
  Event category: no
  Event ID: 7036
  The removable storage service entered the running state.

  (this is when you go out the backup and the Restore Wizard and wait a few minutes... then the Service stops itself...)

  Event type: Information
  Event source: Service Control Manager
  Event category: no
  Event ID: 7036
  Description:
  The removable storage service entered the stopped state.

  It's like aid and assistance...  Most of the people (including the technical support engineers who are hired by Microsoft) say to set the Startup Type to automatic, but you don't have to...  Set it to manual and it will start fine when he needs start (if he can).

  There is no need for these Services (and many other Services in XP) as starting at each restart and run all day without doing anything.

  Here is a good list that will help you understand your XP Services:

  http://www.blackviper.com/2008/05/19/black-vipers-Windows-XP-x86-32-bit-Service-Pack-3-service-configurations/

• How to stop demand for files compressed in my Outlook Express? This request appears on my screen of many times while I'm working.

  How to stop demand for files compressed in my Outlook Express? This request appears on my screen of many times while I'm working, even when I go on the internet, it always appears & crashes me typing.  I have a lot of emails and I don't want to compress their files.

  original title: HOW can I STOP ASKING to COMPRESS the FILES in OUTLOOK EXPRESS

  How to stop demand for files compressed in my Outlook Express? This request appears on my screen of many times while I'm working, even when I go on the internet, it always appears & crashes me typing.  I have a lot of emails and I don't want to compress their files.

  Compress, (Compact in American English), removes waste of space, not your messages. Please read below, but if compact you and still get the prompt, after return. It is another question.

  Why OE insists on compacting folders when I close it? :
  http://www.insideoe.com/FAQs/why.htm#compact

  Compacting your folders periodically is a must to keep OE works fine and at some point, you may lose all your saved messages if you do not. When you delete or move messages, the space they used remains until you compact.

  Never touch anything until the compression is finished.* *.

  See:
  www.oehelp.com/OETips.aspx#2

  With SP2, Automatic compaction in the background has been removed because of problems he has caused. Now, you will get a prompt to compact after 100 closures of OE, you need to do, and do not touch anything until it's finished. If you compact manually, at your convenience, this will also set the counter to zero. See this for more information:
  http://www.insideoe.com/files/maintain.htm#compact

  If you are fully patched, you will now see a copy of your dbx files copied to the Recycle Bin as BAK files. If something goes wrong when compacting, the messages can be easily restored from this backup. A compact manual resets also the counter in the back of the registry to zero now.

  For more information, see the information framed in red here:
  www.oehelp.com/OETips.aspx#2

  To keep things running smooth and harden faster:

  Do not archive mail in default OE folders. It will eventually become corrupt and you may lose mail. Create your own folders defined by the user for mail storage and move your mail to them. Empty the deleted items folder regularly. Keep user created folders under 300 MB, and also empty as is possible to default folders.

  And backup often.

  Outlook Express Quick Backup (OEQB Freeware)
  http://www.oehelp.com/OEBackup/default.aspx

• When stopping down, planner of @backup trying to stop, but then "not responding".

  When stopping down, planner of @backup trying to stop, but then "not responding". What is it? Do I need? If so, how to fix? Otherwise, how to disable?

  Hi Paul Gray TX,.

  1. did you of recent changes on the computer?

  2. What is the finished message, you receive so that closing the computer?

  3 do you have any schedule tasks on the computer?

  Method 1

  Check and make sure that you don't have to schedule tasks defined on the computer during the process of closing.

  How to modify the scheduled tasks in Windows XP

  http://support.Microsoft.com/kb/308671

  Method 2

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• Security update failed for SQL 2005 SP3

  original title: failure of security update

  I keep trying to install an update to security for SQL 2005 Service Pack 3 to windows, but I get the patch installation error message stopped working and its been going on for months, anyone know how to fix it please I need help!

  Try posting in the SQL Server Setup & Upgrade forum for appropriate assistance: http://social.msdn.microsoft.com/forums/en-US/sqlsetupandupgrade/threads

• Two updates - for "SQL Server 2005 Service Pack 3 'and 'Power Poin 2007", throwing errors when installing Code FF Code 80070663

  Original title: two updates - for "SQL Server 2005 Service Pack 3 'and 'Power Poin 2007", throwing errors during installation

  For several months, one day each on ' Windows Vista Bussiness "and"MS Office Professional 2007' install.

  Relevant updates are:-

  1 security Update for SQL Server 2005 Service Pack 3 (KB2494113)

  2 update for Microsoft Office PowerPoint 2007 (KB2535818)

  The lifted message when the update is "patch installer has stopped working".

  Finally, the "errors:" are: -.

  Code FF  Windows Update has encountered an unknown error

  Code 80070663  Windows Update has encountered an unknown error

  I tried nmerous solutions suggested on the forums but nothing helped.

  Please suggest what you please!

  Hello

  Have what troubleshooting steps you tried?

  Answer to the above question could help us by providing the best troubleshooting steps.
  However, visit the link below to download and install the update of security for Microsoft Office PowerPoint 2007 (KB2535818) update.
  http://www.Microsoft.com/download/en/details.aspx?ID=24723

• How config VM for SQL 2008?

  I'm under ESXi 4 on a Dell of 710 on the SDCard with Raid 10. I have 12 GB of ram (soon to go to 48 since this server was going to be something else) with double Quad-cores. I am running WSUS as a virtual machine and SQL 2008 all 64 bits but uses SQL to the time as a virtual processor. All this in the same data store. I have an another data store on the same server and these 2 drives are Raid 1, but I have not yet used. Everything is contained in a box and will always be like that.

  1 can be located the SQL and the virtual machines with the help of it in the same data store or leave I better to put on various Raids?

  2. I want to add Sharepoint which uses also SQL 2008, if it was another instance of SQL2008?

  3. the amount of ram (assuming I'm 48 concerts) and the number of processors should I call?

  Thank you

  Gary

  Gary,

  without knowing what we take on the workload, it is not easy to answer your questions.

  However, we will try to find answers for you.

  Material:

  S ' ensure that your hardware is listed on the HCL. (Server, RAID controller,...)

  -For optimal performance, you must use SAS HDD and battery backup cache writing. Write cache - in my opinion - is essential!

  Licensing:

  -You can save or lose a lot of money thanks to a license.

  -With 1 license of Windows Server Enterprise (2003R2 plus) MS grants you the right for up to 4 virtual machines on 1 physical server.

  -SQL2008 to take a look at the millisecond of license. Depending on the version, you will need to purchase a license by vCPU.

  Installation:

  -Make sure you configure your data warehouses VMFS with the size of the desired block (1-8MB) for the maximum size of VMDK you expect.

  -If you use Windows 2003 server, be sure to align the partitions of the virtual machine!

  -Best practices for reading MS for SQL installations. (Alignment, partition NTFS block size,...)

  Now we will answer your questions:

  1.) depending on the workload and the SQL recovery mode (base, in bulk, plenty) it may make sense to have vmdk on different logical drives (spindles). With the hardware you have I recommend you to create up to 3 virtual drives (OS, data SQL, transaction logs). Put the OS and data on the RAID10 and newspapers on the RAID1.

  2.) well, again it depends on the workload. If a SQL Server is not enough you can save the money for a second license of SQL.

  3.) recommended is to assign as many vCPU and as much RAM as you need. You can always adjust the settings if necessary thereafter. Remember SQL server licenses when adding additional vCPUs.

  André

  PS: I personally do not trust SD cards with the exception of my camera. I always install ESX (i) on the HARD disk!

• Everyone is dismayed to see that there is no password recovery or reset secure put in place for encrypted backups?

  I am absolutely amazed that there is no recovery password for iPhone backups encrypted.

  (1) no password is required to access the iTunes application. He launched and the phone connects automatically.

  (2) someone might maliciously put a password. The password for Mac or device using iTunes OSx need at least before setting the encryption password.

  (3) there is no recovery option. None. Tell me: what password-protected sensitive data have NO option of recovery? No secret questions, no e-mail link, no OSx password, nothing. It's horrible.

  I'm in a situation where I remember not the password, and even if I had the foresight to write it somewhere, that the hard copy has disappeared. I suffer a miserable condition where I lose memory. I have reset passwords on all my stuff course often. That's just my new reality.

  I am faced with a situation where if I ever need to restore my device or upgrade to a new, I won't lose all my old texts and local health data in my applications (which is essential for a person with health problems). The loss of memories of conversations for a person who relies on these devices, precisely because I lose my memory is a slap in the face.

  What the risk of COMPUTER audit team approved this feature, Apple? It's quite incredible that a company of your size would be created people to fail like this. Please post a fix in iTunes for password recovery and substitute it. PLEASE, I BEG YOU.

  N ° if there is a way to recover or reset, the encryption would be completely useless.

  Exercise good security practices on the computer where you have installed iTunes and you will not you care about someone maliciously setting a password for backups.

• Sharing printers has stopped working for me. MacBook Air "think" printer is not connected.

  Sharing printers has stopped working for me. I have an Epson Stylus Photo R340 connected by USB to my Mac Mini end of 2012, and until recently, my MacBook Air has been able to print to it. Now, he 'thinks' the printer is not connected. Computers are on WiFi. Both computers have an OS X 10.11.5 now and the latest driver of Epson printer. Printer sharing is enabled in preferences, sharing, and "Share this printer on the network" is checked in the preferences, printers and Scanners. I went through the hoops to remove the printer and add it again on the Mini and the MacBook Air.

  Of course, the Mini prints very well via USB. Someone has an idea (that I have not already tried) how to get the sharing of printers to work again?

  Other sharing services work, such as the file and screen sharing?

• Using Time Machine for subsequent backups

  I would like to know how can I use Time Machine for frequent backups after the initial. Specifically, I want to know how I can assure you that Time Machine DO backup files that have changed since the initial AND only the new backup files that have been added to the hard drive since the last backup?  In other words, Time Machine will do it automatically or it will save all the entire hard drive again?

  Time Machine which will automatically

  Yes.

• I forgot the password for iphone backup

  I forgot the password for iphone backup

  Hi Laura,

  Sorry to hear that you forgot your iPhone backup password. You can try all possible passwords.

  See backups encrypted in iTunes - Apple Support about

  There is no way to recover your information or disable backup encrypted if you lose or forget the password.

  and lowest...

  You cannot use a backup encrypted if you do not have the password. If you have forgotten your password, the only way to turn off encryption on the backup device is to wipe your device and set up as new. Clear deletes all data on your device. If you do not want to erase your device, restore from a backup rather

  Take care.

• Satellite L855-188 runs slowly - a few apps stop working for a while

  Hello

  I bought this laptop there is an upgrade to a week of the dell studio 1558 and it is most powerful spec wise, and I will admit windows 8 makes things a little strange, but I have problems with the laptop:

  Sometimes the laptop works slowly and some applications such as chrome and steam and Skype just stop working for a while and sometimes require applications to be reset to zero before they will work again and chrome has developed a bug that doesn't let it open if I click with the button straight on her and say to open a new window

  The without wire will fall randomly and won't open the Connections window, the devices show as being active, but cannot enable or disable it or find or even open wireless connections menu for connections to find this can be solved by a system reboot... I have updated the drivers for the wireless to the most recent for the Atheros card

  He do not restart, shutdown or sleep when asked to do the screen turns off, sound as his preparation to close and say with the darkened screen suspended in the closing state until he either cut his own power or I hold the power button to force it to turn off.
  I have updated drivers available on the Toshiba site like all the AMD drivers say they are incompatible

  Help would be appreciated, I don't want to send it back or to try to get back into windows 7 or something dramatic

  To me that sounds like a large number of programs, applications, and processes are running in the background.

  You can try to restore and repair the system:
  [Windows 8 recovery & repair | http://aps2.toshiba-tro.de/kb0/TSB2A03ES0000R01.htm]

  If you want to use PC Restore option, you get the same State as at the first day of the purchase. Worth a try.