Csrss.exe usage reports of different memory with the different commmands... Help!

Similar Questions

• updated my iMAC 7.1 with 4 GB of memory with the intention to go to El Capitan, but after reading how it slows down the speed, I was wondering if going to Yosemite is a better choice.

  Updated my iMAC 7.1 with 4 GB of memory with the intention to go to El Capitan, but after reading the slowness becomes the MAC, it would be best to go with Yosemite?

  If you upgrade the amount of RAM your iMac should be able to handle El Capitan nicely.

• leak memory with the callback function

  Hello

  I'm pretty new on LabWindows and library ninety, I worked mainly with LabVIEW.

  I am trying to create a basic c++ client (no GUI) that sets up subscriptions to several network publication of a PXI DAQ data variables.

  The data for each variable is sent in a cluster and contains different types of data with a 2D array large int16 for the acquired data (average size of array is 100 k in total, and the average time between the data being sent is 10ms). I have an average of 10 of these variables DAQ.

  I'm passing the same callback function as an argument to all of these subscriptions (CNVCreateSubcription).

  He reads all the correct data, but I have a problem is that I have a memory leak in the callback function in the CNVCreateSubscription.

  I have reduced the line of code one and found the function that actually causes the memory leak, it's a CNVGetStructFields(). At this point in the program data has not yet been adopted for the variables of the customers.

  It is a simplified version of the callback function, where I just unzip the cluster and get data (showing only a field in the cluster in the example, showing also doesn't not the decleration).

  The function is passed in the function to subscribe, as follows:

  public static void CNVCALLBACK SubscriberCallback(void * handle, CNVData data, void * callbackData);

  CNVCreateSubscriber (url.c_str (), SubscriberCallback, NULL, 0, CNVWaitForever, 0, & Subscriber);

  public static void CNVCALLBACK SubscriberCallback(void * handle, CNVData data, void * callbackData)
  {

  int16_t daqValue [100000];

  unsigned long int nDims;
  unsigned long int daqDims [2];
  CNVData fields [1];
  Type CNVDataType;
  unsigned short int numFields;

  CNVGetDataType (data, & type, &nDims);)
  CNVGetNumberOfStructFields (data, & numFields);
  CNVGetStructFields (data, fields, numFields); //<-------HERE is="" the="" problem,="" i="" can="" comment="" out="" the="" code="" after="" this="" point="" and="" it="" still="" causes="" a="" memory="">

  CNVGetDataType (fields [0], & type, &nDims);)

  CNVGetArrayDataDimensions (fields [0], nDims, acqDims);
  CNVGetArrayDataValue (fields [0], type, daqValue, daqDims [0] * daqDims [1]);

  CNVDisposeData (data);

  The average settings, I use all my memory systems (4 GB) in time.

  My question is, all else have experienced this and what might be the problem/solution to this?

  Thank you.

  I see that you disable only handle memory (data), but not the memory of the structure; Therefore, before calling CNVDispose (data) you should have something like

  While (numFields > 0)
  CNVDisposeData (fields [-numFields]);

• . Exe file does not open and with the 'Open with' error popsup program to select

  Original title: my exe file located on my desktop and in my control panel do not open when I click on it

  My exe file located on my desktop and in my control panel will not open when I click on them calling the open window with pop and I have to choose a program to open the file, it's I think that when I was attacked by what looks like a scanning device legitimate XP security 2011. How to address this issue.

  Hi MichelleHarewood,
   
  -With what program to this problem?
   
  This problem occurs when one or more of the following conditions are met:
  • The registry values that are associated with the file name extension are corrupted or missing values.
  • The computer is infected with a virus.

  Follow the steps listed in the article given below to resolve this issue:

  Cannot open files with extensions such as.exe, .com, and.lnk on a Windows XP-based computer

• OfficeJet 6600 - reports HP Connect "problem with the printer.

  I just bought an all-in-one OfficeJet 6600 and immediately installed on my MacBook Pro. Installation went smoothly, and I used it for scanning and printing. I am very happy. However, I noticed that HP Connect reports "Issue with printer." Well, it worked fine, so I ignored the error and continued to work.

  Tonight, I have installed the printer on a Windows 7 laptop. At HP Connect, it is always now reports "Problem with printer." That's it - no further details and no symptoms of any kind of problem. How to diagnose the 'problem' and how to fix it?

  Hi there, I know this may seem illogical, but I wouldn't worry too much about the problem with the printer State message in connected HP. I saw myself sometimes, and I was able to print successfully from a mobile device to the printer which connected HP indicated that there is a problem. Have you tried to send a job by using either the application mobile ePrint or to the e-mail address of printers for the printer in question?

  On the Windows 7 machine, you can also download and run the HP print and Scan Doctor to confirm there is no problem with the connection to the computer on which is installed the software of the printer or the printer hardware. Be aware, however, that the application is compatible with the Windows operating system only, so you cannot run it on the Mac computer, but unless you are having problems printing from Mac to the printer, there is no reason to suspect that anything is wrong.

  Hope that makes sense, but post comes back with other questions.

  Best.

• Run the report to PL/SQL with the branch to another page

  I have an application which, at various times, I run a PL/SQL procedure to perform an action, and then we must run a report while also navigating away from the current page. The actions are performed on a button click.
  
  I tried several methods, but for the life of me cannot get the system to do the two things (ie. run the report and the direction to another page). I tried to put in page 0 (to be executed after the treatment on the click of a button) a branch with a request line to print the report, followed by a branch to the other page (also to run after the treatment on the button click) - and only the branch page 0 runs in fact. Also tried a branch to the other page only, with the print in the request parameter request - but only runs the report, do not create a branch to the other page.
  
  I also tried to put the call to run the report in the PL/SQL code, using utl_http.start_request (url), but that came with a "Bad Request" error. Also tried to use the owa_util.redirect_url call, but also no chance.
  
  I'm pulling my hair out at this time, especially because I am under pressure to get the system in very short time.
  
  Any suggestion would be appreciated.

  You can run queries report of their URL (f? p = & APP_ID.: 0: & SESSION.: PRINT_REPORT =)

  So one approach would be to
  The button click, call a JS function which
  

• 1 use the Ondemand/recall process in order to perform the processing workflow (file selection box)
  
• 2 open the report in a popup (from your IR page)
  
• 3 redirect leaves the IR page to another page?
  ------
  Another approach:
  
• 1. IR report submits the page
  
• 2. in the PLSQL block, you do the treatment
  
• 3. the branch redirects to a URL that would point to the report URL.
  OR
  
• 3. do you have a JS onload which runs only when demand is demand for BUTTON and opens a page that points to the report.
  ------

  Still another way is to use htp.p in PLSQL block which made the treatment of workflow
  So your code PLSQL

  BEGIN
    --Do the workflow processing here
    --End workflow processing
    htp.p('');
  END;
  

• Problem with the version number - help please.

  Hello, my Avast reports that my Skype is outdated and must be updated with the latest version, (7.8.0.102), but when I goto Skype help and updates, Skype says I have the latest version already installed (7.7.64.103), what happens here, can someone explain the discrepancy PLEASE?

  Cheers from TekyTek

  For later use, download (download Skype) on this site section, allways will give you the installer for the latest version (7.8 in this case) when available, even if your ' check for update ' tell you that you have the latest version.

  Just make the file skypesetup right click and select Properties, the details tab will tell you which version the Downloader is for (or in the case of a complete configuration file, what version it is).

• ENDPOINT WITH THE OPTIONKEY MULTISITE (HELP)

  Hello

  I have endpoint with a multisite option key registered to a VCS I do not control. When I signed up for the VCS with the endpoint with the option key of a different endpoint on the same subnet as I can not however, connect when I unregister endpoint with the down option of VCS, I can connect to this endpoint with no problem with an another endpoint. When I re - register endpoint with the option key pressed to the VCS I can not connect. My Network guy looked at the packages and told me that the first package of the endpoint that I use to connect to the endpoint with the option key send a packet to 1720, and then all the other packets are sent to the VCS I do not control. Sent VCS deny. Trying to find out why the endpoint that I use to connect to the endpoint with him becomes key option refuse SCVS.

  I think you're mixing a whole bunch of information that eventually causes you confusion.  There are two elements in play in your example.  To try to make it simple

  1. a license on a multisite endpoint (which allows you to make several simultaneous calls) through your call control mechanism chosen

  2. a call control mechanism being 'direct' or through the VCS.  You can have the two 'direct' and a 'VCS/guardian' in game at the same time.

  The best solution to your problem would be to talk to the one who manages the VCS you don't control and asking them to allow the 2nd endpoint to register as well - this way, your two units will be able to call each other, and one with the multisite license will be able to call several other end points at the same time (using its multisite license).  According to what other infrastructure is connected to the VCS managed externally, there may be other benefits to do so (calling other end points registered, the external call, managed directories, MCU, TCSes, etc. If they are available).

  Wayne
  --
  Remember the frequency responses and mark your question as answered as appropriate.

• I have a problem with the numbers. Help, please!

  I have a problem with the numbers. I am trying to create a formula that can add a cell only when another cell with a pop-up menu returns on a specific pop.  I can't ignore the cell if it is not on specific pop upward.

  assuming the cell with pop's cell A1

  and if the context menu contains items:

  YES

  NO.

  MAYBE

  and the value you want to add in cell A2

  You can add the value in cell A2 when the context menu is 'YES' like this

  = if(A1="YES", A2, "") +.

  where is the expression that adds other cells if you want

  could be another cell

  = If (A1 = "YES", A2, "") + B2

  or a range of cells

  = If (A1 = "YES", A2, "") + sum (B2, D2, G2:H5)

• Problem with the display of help on hidden objects

  Hello.

  I started the conversion of an application to make use of the universal theme. The way I did is create a new system of menu navigation from this part of zero with the universal theme.

  I loaded my old 4.1.0.00.3 application in my workspace and began to copy pages in my new app. The problem that I am facing is bound to the elements of the region that appear under certain conditions. When the items are hidden, the help icon is (surrounded by a circle point of mark) still visible, stand-alone meeting in the middle of the region. If you click on it it displays help for a field that is not visible:

  

  So as you can see, there's a widget of self-help on the right side below the item earlier in the day.

  I use the product Application Express Build 5.0.2.00.07

  All advice appreciated.

  Thank you

  Clive.

  Hello. Thank you. I ended up remove and re-create the item that did the trick.

  I'm guessing that he in some way I messed up migrate objects from 4.1 to 5.

• Audition refusing to leave my blue Nessie microphone to work with the software. Help!

  Whenever I try to use my blue microphone Nessie and I click on the record button, you will see this error message:

  «The sampling rate of the output devices and audio don't match.» Audio cannot be recorded until this problem is corrected.

  Use the appropriate operating system or control panel of audio device to set the frequency of sampling of input and output devices to use the same settings. »

  That's the problem, I DO NOT KNOW WHICH SAMPLE RATE of USE for MY MIC ON HEARING! Heck, even the correct settings I have no idea what to use!

  I don't have time to experiment with the settings, if someone of you have any suggestions? In the meantime, I'll have to use Audacity to use my microphone.

  Thank you.

  My OS: Windows 8.1

  Microphone: Blue Nessie Desktop USB Mic

  Well, so much the manufacturers specifications and the manual for the State mic mic sample rate is 48 k. So the hearing and the sound Windows settings must be set to one to work.

• Can not understand this issue with the layout - please help

  Hello

  I have a problem with the page layout in the header of my site portion.  I would like the Facebook icon, the text "Write us", "Reservations welcome!" text and phone number all rinse just like on the picture below.

  

  No matter what I do the text "Write to us" is not the right move.

  

  I don't know what I'm not doing correctly so I ask some fresh eyes to take a look at the code CSS (here).  The tags I'm tweaking are:

  #et-social-icons {float: right; margin: 20px 0px 0px 0px ;}}

  #et-social-icons one {make-size: 14px; color: #581b1a ;}}

  #email - us {margin: 60px banner 0px 0px 0px; padding-left: 40px ;}}

  #email - we a {make-size: 14px; color: #581b1a ;}}

  #reservations p {margin: 0px 0px 30px 0px; do-size: 14px; police-weight: 800; color: #581b1a ;}}

  The header html/php code is here:http://codeviewer.org/view/code:383 has

  Try the css below. I'm not sure where you want to put as there seems to be a lot of css files associated with the page. We really need to finish the css cascade.

  #email - us {}

  text-align: right;

  }

  {#et-social-icons}

  text-align: right;

  padding: 0;

  }

  #reservations p {}

  text-align: right;

  margin: 0;

  padding: 0;

  }

• Compatibility of memory with the Inspiron 560?

  Hello

  Are G.SKILL Ripjaws Series 8 GB (2 x 4 GB) 240 - Pin DDR3 SDRAM DDR3 1066 (PC3-8500) (F3-8500CL7D-8GBRL) compatible with Inspiron 560?

  Based on the recommendation of http://en.community.dell.com/support-forums/desktop/f/3514/t/19524134.aspx, I bought these, but I get the error code double beep, which corresponds to "No. RAM. I have them sitting correctly, so installation was not a problem.

  Perhaps Inspiron 560 cannot accommodate a 4 GB RAM?

  Hi NewDaddy,

  Dell Inspiron 560 offers two memory module sizes, which can be used in the memory locations: 1 GB and 2 GB. These offerings enable memory configurations as follows:

  • 2GB twin to 1 066 MHz (1x2GB) DDR3 SDRAM memory
  • 3GB memory DDR3 SDRAM twin to 1 066 MHz (3x1GB)
  • 4GB memory DDR3 SDRAM twin to 1 066 MHz (2x2gb)
  • 6 GB Dual Channel DDR3 SDRAM 1066 MHz (2x2gb, 2 x 1 GB)
  • DDR3SDRAM Dual Channel 8GB 1066 MHz (4x2Go)

• Script to get use of the memory with the parameters like VM uses, active, granted

  
  Hi friends

  Can someone help me get the powercli scripting to get the use of the VM folder memory wise with metricks as consumed, Active, granted for two weeks with a period of time for example special hours of buisness with output to a CSV as below

  Vmname	Esxhost	ActiveMemory	Grantedmemory	Memory consumption	Folder

  It seems that the statistical level history interval 3 (last month) is not set to at least 2.

  The counters active and issued both require level 1.

  

  

  Consommé requires level 1

  

• CF8 Report Builder is duplicative with the subreport parameters

  I encounter this problem to launch Report Builder Windows XP:
  
  1. create a report.
  2. create a subreport that has input parameters.
  3. Add the subreport to the main report and set the parameters to the subreport.
  4. Save and close both files.
  5. open again the main report file.
  6. look at the list of parameters to subreport to the linked subreport
  
  Regularly, I find that in this scenario, any subreport parameter that I initially set was duplicated, such as if, I started with:
  
  varOne - #query.foo. #
  varTwo - #query.bar #.
  
  As soon as the reopening of the main report and the subreport parameter list insepcting I'll see:
  
  varOne - #query.foo. #
  varTwo - #query.bar #.
  varOne - #query.foo. #
  varTwo - #query.bar #.
  
  Which causes errors when I try to run the report.
  
  What the patch schedule for Report Builder?

  This problem seems to be fixed in build 181436 reports generator