CSS - content h1 and p text does not appear correctly

Similar Questions

• Any Composition AE (dynamic links) and a text does not appear in the first (CS4)

  I have an AE comp I did with a few credits a few weeks which was 20 seconds ago. Now, I go back to edit it - done long 52 seconds (Comp changed settings), I increased the length of each text box appears a little longer; then I also copy & paste a text layer and put it between the 2nd to last and the last layer of text.

  Then I go and copy/paste about five more layers that all go behind what I had before - in my AE comp I also put the other. I edited all the layers of copied text and type in all that much good.

  I have a background with text on top of that. The background is precomposed and then all text layers in the final composition.

  When I go to the first I see * some * of the changes immediately.

  When I go to the for first now to watch, all changes are applied until the last layer of text I've had since a few weeks ago - including all changes made to these layers as length, font and size, as well as the text layer, I put between the last and the 2nd to the last layer.

  But that's it - once the last layer before is played, no layers of text appear, but the background is perfectly well yet, everything as it should.

  In AE, it plays well and looks great.

  What I am doing wrong? How can show in AE but not first - if the background shows?

  I went to the AE and has one of the layers of this latter text to see what he would do in the body and he hid the background well, but the text still does not appear in the body but in AE.

  Police is still - Adobe Caslon Pro

  My system:

  Windows 7 Pro (64 bit)

  Intel Core i7 980 X 3.33 GHz

  Drive system 750Go

  2 TB disk Media

  12 GB memory

  GeForce GTX 470

  Running Adobe Production Premium CS4

  AE version 9.0.3.8

  Body version 4.2.1

  Any idea would be appreciated!

  Thank you!

  Delmar Penner wrote:

  I changed it to the 3D and moved a few around closer - watched from top, right, left, back... Yes, all the different points of view and could not see anything wrong.

  In fact, the need to use the 3D is not very apparent in this model.  I would use 3D unless there was a reason to do so.

  Delmar Penner wrote:

  ... everything up to "Other credits" do not appear...  I noticed that there is the kind of grid with the blue symbol just in front where I name the layers - what does it means? It's all those who do not have their appearance... Any connection?

  Indeed it is!  Did you by mistake guide layers, not the text layers.  Here is their description:

  http://help.Adobe.com/en_US/AfterEffects/CS/using/WS3878526689cb91655866c1103906c6dea-7e76 a.html

  .. .and here is more about them:

  http://community.Adobe.com/help/search.html?q=guide%20layer&HL=en_US&LR=en_US&l=AfterEffec ts_product_adobelr & site = aftereffects_cs5_all & auto = 1 & Filter = 0

• ActionScript text does not appear correctly

  It's really strange.  The last letter of my text in the window actions gets cut by the next letter (or space) and it made my script very difficult to read... any ideas on what is all?

  I am running on a MacBook Pro Intel Core Duo FlashCS4.

  

  Any help would be appreciated...

  Bill

  Edition/Preferences/actionscript-click and select a standard font such as courier or arial, 10, regular and click ok.  Recheck your panel actions.

• Sometimes a character of a text does not appear correctly. Moving the page or accentuating will fix.

  FF or maybe hardware? Screenshots available if necessary.

  openSUSE Linux 13.1

  FF 29.0.1

  Start Firefox in Safe Mode {web link}
  While you are in safe mode;
  Press < Alt > or < F10 > to display the toolbar.
  Followed;

  Windows; Tools > Options
  Linux; Edit > Preferences
  Mac; name of the application > Preferences

  Then Advanced > General.
  Find and stop using hardware acceleration.

  Dig safe web sites and see if there is still a problem. Then restart.

• CSS style for the display text (does not save the State)

  Hello
  
  I just upgraded from APEX to APEX 3.1 3.0 and display text (does not save the State) which I had set to display more by adding style = "color: #658bb1;" font-size: 25; "the field of HTML table attributes for the element.
  
  Since the upgrade, that has been lacking in the font size of the body (12 PT) and I can't seem to be larger.
  
  I tried to use attribute selectors - span [class = display_only] {color: #658bb1; font-size: 25px;}, but this only works in Firefox.
  
  Can anyone help please.
  
  Thanks in advance
  
  Graham.

  Hi Graham,

  I can't see your post exactly what you did!

  I tried your style here: [http://htmldb.oracle.com/pls/otn/f?p=33642:176] and it seems to work ok in IE and FF

  As part of header HTML of my page, I add:

  <style type="text/css">
  .display_only {color: #658bb1; font-size:25px;}
  </style>
  

  Andy

• Just updated to IOS 10 and replace text does not work

  Just updated to IOS 10 and replace text does not work.  For example typing in omg should show oh my God. Has anyone else got this?

  I did the old thing: Disconnect to iCloud and sign back in. Unfortunately, he did not turn. The same thing happened on my iMac when upgrading to Mac OS Sierra - I lost all my text replacement. I also did Disconnect from iCloud and inback Panel . Unfortunately, it also didn't do the trick. Anyone know how to restore the replacement text. It is not has resided in the cloud?

• I did a full page gradient and my text does not go to the top of it. My graphics will be but not my text

  I did a full page gradient and my text does not go to the top of it. My graphics will be but not my text. In older versions I create a gradient and send it to the back. So I did, and the only things that remained were the eps graphics. I can't get the text to come forward. What I am doing wrong.

  Two possibilities:

  you text is on a layer and the layer beneath the layer of that your gradient is enabled;

  or your textwrap on a gradient box.

• Hello. There is a problem on the IPhone s 5 - after reset, the display flashes on the sides for 10 minutes, then the flashing stops. And the problem does not appear again until they do not use a Hard Reset (Power Home). The phone is new (5 days). It's a m

  Hello. There is a problem on the IPhone s 5 - after reset, the display flashes on the sides for 10 minutes, then the flashing stops. And the problem does not appear again until they do not use a Hard Reset (Power + Home).

  The phone is new (5 days). It's a wedding?

  If you encounter this flicker, then the next troubleshooting step is to restore from a backup. If the behavior persists after the restore, then the last step is the factory restore. If after the factory restore and adding no additional content, you see always this problem, then you must make an appointment at the Genius Bar to the nearest Apple store or service provider authorized Apple to have the material examined. If the behavior goes after the factory restore, then sync again your content manually, without using the backup. It seems to me it's corrupted content in the backup.

  Restore your device from an iCloud or iTunes backup - Apple Support

  Use iTunes to restore your iPhone, iPad or iPod settings - Apple Support

• I have a form in which the text area can be developed to accept more text, but the text does not appear on the printed copy.  How can I get the text to print?

  I have a form in which the text area can be developed to accept more text, but the text does not appear on the printed copy.  How can I get the text to print?

  Hi robinm6200,

  Make sure that you have selected 'Document and annotations' under 'Comments and forms' when printing.

  

  Kind regards

  Nicos

• Flash cs6 text does not appear.

  Hello

  I just opened flash cs6 and discovered that the text tool does not work well.  It allows me to select the tool and place a text box, but the text does not appear.  It's too much space in the text box, but I can't.  The alpha is already at 100%, I don't know what is happening.

  Hi all

  Please read this technical note for more information on how this problem can be solved.

  Kind regards

  Suhas Yan

• Remote control does not work, and the load does not appear on Apple TV

  Hello

  I just returned from vacation and my remote seems has stopped working.   Naturally, my first assumption was that the charge was simply exhausted.

  Apparently that was the case.   He seems to have just died.

  I did pay for more than two hours and it still does not appear under devices Apple TV.

  My Apple TV 4 works very well because I use the remote control of my phone to navigate through it.

  If I understand correctly what I look at you, it seems that the remote control is same not synchronized or recognized by Apple TV more.

  Any suggestions on how to fix this?

  A reset is complete? Restart... no change.

  Thank you

  Bob

  1. Have you tried pressing the menu and the button for a few seconds while it now an inch or two away from the Apple TV, if successful, you should see a message on the screen saying the remote was paired.
  2. If you have an older remote from a previous model MacBook or Apple TV, you can use to restore the Apple TV, which, in many cases, has been sufficient to reactivate the remote Siri. You must complete all upward to undertake a restoration.
  3. If you have a USB cable - C you can try to restore by connecting it to iTunes on a computer.
  4. If you have tried all of these steps, don't have a distance sooner or a USB - C cable or their use is too inconvenient, return it to the store where purchased for a replacement, or to couple for you.

• Text does not appear in PSE8

  It's so weird! After you have moved the action files to the appropriate folder, a

  viewing in PSE8, d I can no longer display (on-screen) horizontal text in the text box.

  It is located on: Jester/Regular/60 pt and white is set to background and foreground.

  I created a new layer, then enter in the text (even if she does not appear on the screen),

  but it appears on the text layer layer.  It also does NOT appear in the preview before printing.

  Any suggestions?

  I worked previously, today. I restarted pse8 again and again... same results. (Tried different)

  fonts, sizes diff., etc... no luck)

  Lynda

  Try to reset the text tool by selecting the text tool, and then click

  the extreme left of the tool bar options and choose Reset tool.

  

  If it does not have a difference, could you post a screenshot?

  MTSTUNER

• Dynamic text does not appear

  Hello world!

  I just want to know why a dynamic text does not show in the swf video.

  Let me explain a bit more:

  I have a mc in a main period in which is an another mc,

  This mc have photos and a dynamic text which must scroll to see all this.

  but the text appears!

  Below you will see a preview of the mc where you can see the level of it also.

  

  I checked the script of the actions, but there is no problem with him. Here is the AS:

  onClipEvent (enterFrame) {}
  If {(lMouseover)
  _parent.Text3.scroll-= 1;
  }

  }

  Well, when I test the fla, I don't see the Text3 in the outgoing swf.

  Could someone tell me what I am doing wrong?
  Thank you very much in advance for any help

  If it is a dynamic textfield, try incorporating the fonts.  In most cases where dynamic text is not displayed, it is the solution. It is always the case when using a mask on a dynamic textfield.

• Text does not appear when I incorporate

  Hi, thanks for taking the time to look at my problem.
  I have Flash CS3, and I just downloaded the Pirulen police. I played my movie and it works. When I tried to incorporate the police, the text does not at all appear.
  
  Also, I have a tint on my text on a keyframe, and if I click on the calendar, the text appears black as it should, but when I export, the text remains red. I tried different fonts, but none of them work.

  Uncheck the autokern.

• I do not have a Foxfire button. I even installed a new copy and it still does not appear.

  I have tried everything to find info on why it does not appear. There is none that I can find.

  I hid any view, navigation and link toolbar and it show up. I wasn't expecting to have to hide things so he can appear. Thank you.