CSV files for purchases OBIA and spend analytical

Similar Questions

• Segmentation of a huge CSV file for easier analysis

  I have a CSV file that contains 3 columns: time, voltage and current.  This data covers a period of 12 days with 1 ms between the samples and the size of the file is 53.4 GB!

  I use LabVIEW to chunk this file into pieces easier to manage for analysis using spreadsheet File.vi reading and write a File.vi spreadsheet and my method works very well... to a point.  Here's a snippet of what I do:

  

  I use the "start offset reading" of entry to reading worksheet File.vi inch my way through the file, but since it is a type of data I32 it rolls more and VI out errors.  I think I have to do, is remove pieces of the main file that I read and write in their respective smaller file, but the method to do this is me stumping.  Y at - it suggestions on how I could pull this off while using the worksheet vi file (to avoid reinventing the wheel as much as possible)?

  Some ideas: I'm playing:

  1. of iteratively, delete data and reset to '0' marker in the file (reading data in order from the present to the future).

  2. start at the END of the file (i.e. read data from future to present) and iterative set the smaller size, eliminating the data blocks that I will.

  The simplest solution would probably be to modify the existing worksheet screws (or a copy you make of them) - you did, they use 32-bit values to track the location, but if you look inside the screw, you should see that the actual file functions use 64-bit values (the values of 32 bits in the functions are actually used for backward compatibility). I haven't looked closely, but my guess is that you can simply change this option to be 64 bit and that your code should then be able to go through the entire file.

• CSV file for importing

  I don't know if this has been discussed, but the import file function is actually a lot of work. I mean, I can create a CSV file of my IP addresses by the export of a third party monitoring tool, but I can't get the SN with her. Why this 'feature' cannot be done with just the IPS without SN? After all, the seed router discovery feature gets the serial number for devices; Why do we need SN under the import?

  Go to management > discover and manage devices

  Select the first option 'discovery by known IP addresses '.

  Copy the IP addresses column in Excel

  Paste IP addresses in the input area. (It seems small but can contain all IP addresses)

  Click on the Add button

  Click on 'Next', change your settings to the appropriate SNMP version and click "Finish".

  Please let me know if this doesn't work if you have other questions.

  Thank you

  Lynden

• Just an exported bar-file for Q10, Z10, and necessary peripheral Alpha SDK native 10.1.0.338?

  Hello

  Here's a simple question probably, but an answer would help me a lot.

  I build an application against the new version of the native SDK (10.1.0.338) - the beta version for the features of Q.

  Then I tested it with the SDK on Alpha device, Z10 (both 1280 x 768) and also of Q10 (720 x 720) and it works fine.

  Then, I produced a bar file to export to the world of BB. My hypothesis is correct that I need a simple bar-file for all devices (Q10, Z10, Alpha device)?

  Thank you very much in advance for your help and your best regards

  Andreas

  That's the way I do now, so as far as I know, this should be sufficient.

• video files for DPS horizontal and vertical

  My class built a DPS application last semester, it is heavy on video.

  Students built the app in the H and V of the guidelines.

  When I download the producer, it seems to load the video twice once for the V and once for the V - y would there be a way to get so that both orientations were using the same file?

  I fear that the final folio will be massive in size because of all of the video content.

  Thank you

  Seth

  I deleted my previous answer. If you use the same path for the assets shared among the versions h and v, each shared resource is downloaded only once. This is true of other layouts in InDesign CS6, and I think that's true for CS5/CS5.5 as well. This was the case during a quick test, we did it.

• error message when I try to update my files for photoshop CS5 and lightroom.

  I get the following error message when I try to update my photoshop CS5 and lightroom files.  "There was an error downloading this update. Quit and try again later. "I tried and still no luck.  Can anyone help.

  update by downloading the files directly and then apply them:

  http://www.Adobe.com/downloads/updates/

• In the tab "Regional and Language Options", "Language support additional" Section__Install files for complex scripts is greyed out, cannot uncheck the box

  Hello, I have two problems with the language bar Options:

  1. I can't uncheck the checkbox "Install files for complex scripts and right-to-left languages" because the box is checked and grayed out. Could someone please suggest how to disable and uninstall the files?

  2. when I run Windows icon does not automatically appear in the taskbar until the language bar I click anywhere on the desktop (who does appear instantly). Someone has any idea how to solve the problem?

  Thanks in advance for your help

  Hello

  I experienced a few problems here which was virtually anonymous to your problem, I wasn't able to check it out instead of clear.
  Clear the check box, you must insert the CD of installation for the i386 file and then process. It could be solved.

• What is the format of the CSV file to upload for Capacity Planner?

  Do I just a CSV file with netbios name and ip address?

  If you referring to the host list file that is imported into the data manager (GUI in the collector), the first entry is a consolidation strategy, the second entry is the name of the host system, an alias can be added as a third.

  If you use excel to create the file in the csv format, column A is the grouping, column B is the name of the system, and the C column can be the system alias.

  If you use Notepad, use a comma between each entry.

  Usually, only the groupname, systemhostname is all you need as long as the name resolution is correctly configured in their environment

  Example:

  DomainA, System1

  DomainB, System2

  DomainB, mobile3

• Supplies and spend analysis-W_PURCH_RQSTN_LINE_F

  Hi friends,
  
  We are OBIA implementation for the procurement and spending analysis.
  
  Version: OBIEE 10.1.3.4.1, OBIA 7.9.5 and EBS is R11 and database Oracle 10 g 2.
  
  «"Im faced with the issue of procurement spend analytical - dashboard"Requisitions", name of the report:" request for upstream, number and quantity per purchase org»
  
  I chose the year and month from the prompt when you use invites him I get the difference in the number of applications when compared with the fact table of the Data Warehouse W_PURCH_RQSTN_LINE_F.
  
  
  for example: I've used the below sql statement when I use the Sub statement I get the requisition number 10, but my report of dashboard displays 2.
  
  SELECT count (distinct PURCH_RQSTN_NUM) W_PURCH_RQSTN_LINE_F where trunc (CREATED_ON_DT) between January 1, 2008 "and on December 31, 2008" AND DELETE_FLG = 'n'
  
  Please let me know the logic underlying the report.

  Do you find not all entries in manage Sessions. If this is not the case, try to run the report and view the journal entry. If this cache hit request then you must clear the cache of the RPD. Manage-> Cache-> Edit-> Purge. also delete entries to manage Sessions. Once more to run the report.

• Merge with VB Script ascii_diadem_9.1_or_later.zip .csv files: how to add the column/channel with filename

  Hello

  I use ascii_diadem_9.1_or_later.zip to merge the data from several .csv files.

  The problem is that I am so some weird futuristic timestamps in a channel

  which do not appear in the original .csv files:

  How to adjust the VB Script automatically adds a new channel to the a .csv resulting

  file with the original name of the .csv file for debugging purposes?

  Any help is greatly appreciated!

  Thanks, Katharina

  Hi Katharina,

  What happens when you drag your tiara BROWSER or Windows Explorer data files in the data portal?  See all date/time values in a table in VIEW of this channel?  The problem may be that you do not have a use but which properly load your data files.  The example is designed to show you how to concatenate several files of data together, but assumes that you could provide / have your own use.  If you use work already, then look for these lines to the top of the VBScript and substituting the name of your use "CSV".  If your files have a file extension different "*.csv", then you must also change the line "FileExt '.

  FileExt  = ' CSV files, *.» CSV »  ' « *. DAT; *. CSV '.
  
  Use = "CSV"  ' "' or 'SpecificDataPluginName '.

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• CSV files

  How are Hello everyone, you?

  I'm working on a software to make measurements using my drone of railroad.

  My drone generate csv files (such as it is attached).

  The first column corresponds to the distance that generate the encoder, the second colum is generated by the inclinometer.

  But if I open data, for example Crosslevel, the distance on my VI, in the first graph called CrossLevel, the distance corresponds to the values of the CSV (first colum on excel), the distance on X showes how many lines form on Excel (crosslevel showes 54, should be starting 0.004 and finishing on 4 924)

  The distance on X software indicates how many lines on Excel chart

  the values are correct

  Basically, I need a XY Chart with correct values from csv files

  I tried to separate the values of the first and the second column of the csv files, but I'm

  Is there a way to make the graph shows the value I want?

  To read the data on my VI, open the VI and on these 3 fair trails enter the value corresponding to each path, then press the red button in addition to the STOP button. the software will only work if you enter all 3 csv files

  The VI and these 3 csv are attached.

  Thank you very much

  Sorry for my bad English

  Why do you use dynamic data?
  You turn table of DD and new table.
  Is there way to draw your data on the XY graph.

  

  

  Your transformation function is also a 2-channel signal but not xy-signal

  

• Correct format of the cells after the writing of csv file?

  I tried, still struggling with what are probably simple enough to do.  I write the data to a csv file, but my data is not from the way in which I need to look into the worksheet once its been written.  Each of the string from the Panel data must be in their own column.  Please see attached csv for what I aim to do in a finished program.  Right now, I can write in the csv file, but the data and the fields are not in their correct columns/rows.  Can someone make me jump started on this please?  I am very new and green in Labview.  This is my first program.  Thank you.

  Wire "T" in "transpose"?

• CSV file reader

  Hello

  I have a file .csv locally (not the server) now, I want to add these csv files in my project and I have to analyze these csv file.

  I don't get the point of departure for this feature.

  I have to add these csv resources files? I'll take in the code... provide extract code if you have.

  I have to make this request on OS 5.0

  Thank you

  Zahid Naqvi

  copy the .csv file in the res directory.

  Try this example

  Vector lines = new Vector();
          InputStream in = getClass().getResourceAsStream("test.csv");
          LineReader lineReader = new LineReader(in);
           while(true){
               try {
                  String line = new String(lineReader.readLine());
                  String[] words = StringUtilities.stringToWords(line);
                  lines.addElement(words);
              } catch (EOFException e) {
                  break;
              } catch (IOException e) {
                  e.printStackTrace();
              }
           }
  

• Import CSV file cell text in Memo field in FDM

  Hello world

  I try to import data in MDF Memo fields. I have a source CSV file that is imported via the batch loader. I suspect that I have to set a script but I don't know which. Can someone give nme (in a better sense of practice) some advice regarding:

  -What should be the layout of the source CSV file? (this is an extract a HFM prob app so not very flexible)

  -What script will need to be adjusted to import data in Memo fields?

  Some information:

  The source application is HFM which produces a CSV file for import of FDM. The data source contains the text amount and the cell for the amounts. FDM is used as an ETL to load data to another application of HFM. I understand theat LOADB Action script exports data of Memo fields to the text in the cell, provided that integration is enabled. So the second part of this load of data should work.

  Hello

  There are different options to achieve this.

  You can import your column with information about the cell to a dimension of the attribute. Then before the validation of data in the main table (script of the event ImportAction / sous-evenements PostWorkToMainProcess), you can create positions for memory based on this attribute and data loading. You can use SQL to insert the memo point tables or use fMemoAddItem (class ArchiveMgr)

  You must enable "Text the loading cell" of the adapter in the order that these memorandum items are loaded in the form of texts of cell in HFM.

  Hope that specifies

• PowerCLI Move-hard disk in csv file

  Hi all

  Summer banging my head with it's drving me crazy I hope someone can help please. I use LucD excellent orphaned files and folders - spring cleaning - LucD notes script to identify orphaned VMDK files. I ran the script and export the results to a CSV file.

  What I have to do now is to run a script that will move each VMDK in the csv file in another data store. I'm fighting to get the order correct powercli and I hope that someone will be able to help please.

  I tried these:

  Moving - hard drive () Disk hard- Import-Csv C:\csvfilename.csv | %{$_. Nom })

  
  

  Cannot bind parameter 'hard drive '. Cannot convert the value of 'filename_0001.vmdk' to type 'System.String' to type 'VMware.VimAutomation.ViCore.Types.V1.VirtualDevice.HardDisk'

  And

  Get - hard drive -Name ()Import-Csv C:\Users\DeanE\Documents\ListofDeletedDC2_A_T1_SRM_PL003VMDKs.csv | %{$_. Nom })

  Get-hard drive please specify at least one of the following: path, Datastore, VirtualMachine, model or snapshot.

  And

  Get - hard drive -Data store DatastoreName -name ()Import-Csv C:\csvfilename.csv | %{$_. Nom }) 

  Parameter set cannot be resolved using the values of named parameters.

  Any help would be greatly appreciated please.

  Thank you very much

  OK, had a different perspective.

  The following seems to work for me, at least for entries that have 'flat' in the VMDK file name

  C:\orphan.csv Import-Csv - UseCulture | %{

  $ds = $_. Extents.Split(']') [0]. Trim('[')

  $dsPath = $_. Extents.Replace('-flat','')

  Get-hard drive - data store $ds - DatastorePath $dsPath

  }

  If you have entered in the CSV file for which it doesn´t work, let me know what is the area of the extensions.