CUCM: Roles and permissions for Reset/restart of the phone or apply Config

Similar Questions

• What is the problem with my iphone? He says still no service but my sim card works with other phones, after a reboot it says searching until I have to remove and reinsert the sim ive done all what is the factory reset to open the phone to verify any damag

  IPhone 6 64 gb

  iOS 9.2.1

  The phone says no service but the SIM card works, everything in the phone works except the flash still lights up and flickers sometimes before becoming stable but who don't mind not 'that' much, ive tried factory reset and everything, ive also open the unit and looked for signs of damage, the phone knows there is a SIM card in the phone , but he never says the name of the carrier, also after the restart he said looking and does not stop until I have remove and reinsert the SIM card.

  You can restore the factory state after an iTunes backup

  If this does not resolve the problem then you may want to align on Apple or an approved repair shop

• Associate roles and permissions to users who are on a database

  Hello
  
  I want to achieve secure authentication I used the Configuration of the ADF, but I discovered that I can't put my users to my database. I can just create users with roles in Jdeveloper.
  
  don't you how we can put users in Jdeveloper and associate the roles and permissions?

  If you don't want to use the Adf security, you must use a custom security implementation or use a traditional J2EE security implementation.

  Remember, ADF is little wild for newbes, just be patient and read the documentation (it is useful).

  If you have any more questions, and then close the case.

  Jhon

• Dump the roles and permissions

  I want to empty the roles and privileges for my virtual Center for audit purposes. How can I do this? Sorry for not not googling and asking questions here directly.

  Get-PSSnapin -Registered | Add-PSSnapin -ErrorAction SilentlyContinue
  Connect-VIServer -Server myVC.fqdn -User myUser -Password myPass
  
  $si = Get-View ServiceInstance
  $am = Get-View $si.Content.AuthorizationManager
  
  $am.RoleList | % {
   $_.Name
   $_.Privilege | Sort | % { "`t" + $_ }
  } | Out-File c:\dumpRole.txt | Notepad c:\dumpRole.txt
  

• Roles and responsibilities of dba oracle in the development team

  What should be the role and responsibilities of dba oracle in the development team?
  
  Application dba should have identification information of the oracle db box on user?

  Hi, working as a Application DBA as production s/n, while the resolution of problem ALS would not apply to them. Apart from this change in the pressure of the team will be there.

  These are points to remember.
  Test Db creation for the environmental testing,
  Replication of schema of POC
  replication of the DB for the installation of the interface.
  User, space management.
  Roles and security management
  Space of prediction - this will be useful when you estimate for storage
  you will need to give application implemented for the Production DBA with correct specification.
  store schema changes
  Ensure that shas good script to provide the DBA of Production team.
  Deployment of the application.
  performance optimization...

  All the environment memory /CPU statistisc need to check at regular intervals. If issues to escalte the INFRASTRUCTURE team

  HTC

  Tippu

• Bought two of the iTouch, one for my wife and one for me. In the Notes his has the "" symbol for the formatting and mine does not work. Any suggestions?

  I bought the iTouch two at a time, one for my wife and one for me. In the application 'Notes' my wife shows the symbol "+" to the formatting and mine does not work. Any suggestion.

  Could you please include screenshots of the so-called issue?

• I got several emails/Bills today saying that my ID Apple is used in America, to buy apps (one for £24) and one for £16. However, the sender is newsletter@staff.aruba.it, so I assume it's Spam? Thank you

  I got several emails/Bills today saying that my ID Apple is used in America, to buy apps (one for £24) and one for £16. However, the sender is [email protected], so I assume it's Spam? Thank you

  It is indeed a spam.

• Hoax call on notifications about a virus tries to hijack your computer and ask for help to remove the files?

  OT: security.

  Dear community,

  Did anyone out there contacted by "windows" say you they receive notifications about a virus tries to hijack your computer and ask for help to remove the files? Initially, it was an area code 855, but now the number is unavailable. I get a lot of calls.

  any help would be appreciated

  Thank you

  Hello

  It's a scam.

  Here are the tips that we regularly give the posters who receive these types of calls:

  We have all the errors and warnings in our Event Viewer

  Either these so-called "Microsoft" Tech companies want to sell you a worthless software, or remote access to your computer to try to steal your credit card and bank information and also achieve an identity theft on you.

  You are the only person who knows if you gave them remote access.

  If you gave them remote access and you do Internet banking, contact your bank, to explain, and change passwords.

  If you use your online credit card, cancel and get a new one issued to you.

  And the only way that willl you know that you are free to them is to backup your data and do a clean install of your operating system.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And Microsoft does not contact you unless YOU have made prior arrangements with them to do.

  There is an article in the link I'm you provide at the end of this one

  Read this Information from Microsoft:

  "Avoid scams to phone for tech support.

  http://www.Microsoft.com/security/online-privacy/avoid-phone-scams.aspx

  Don't be fooled of unsolicited calls. Don't provide personal information.

  Here are some of the organizations that cyber criminals claim to come:

  • Helpdesk Windows

  • Windows repair center

  • Microsoft technical support

  • Microsoft technical support

  • Windows Support Group Technical Department

  • Microsoft Research and Development Team (team of Microsoft R & D)

  See you soon.

• Recently introduced an iPhone out of someone and the access code is still and I do not know Apple ID them and I can not get on the phone and do not have access to a computer so what do I do?

  Recently introduced an iPhone out of someone and the access code is still and I do not know Apple ID them and I can not get on the phone and do not have access to a computer so what do I do?

  You must contact the seller and ask him to remove this iPhone in the devices list. Otherwise, your iPhone will be a useless brick.

  Find my iPhone Activation Lock: a mechanism of extraction of the previous owner - Apple Support

• Adding roles and permissions

  Hello

  I am trying to install a role and authorization in vCenter 4.1 so that another user of vCenter 'read only' access can display CapacityIQ. Documents say to seek a role capacity IQ, but I have not found one. By the documentation.

  Procedure
  1. reboot the vSphere Client.
  2. Add the global privilege CapacityIQ in a new or existing role.
  3 right click on the folder root of the server vCenter in the inventory tree and select Add permission.
  4 in the dialog box assign permissions, assign the new role or existing user that accesses CapacityIQ.

  The global privilege CapacityIQ there simply isn't. How can I add this to so I can grant the necessary access?

  Thoughts anyone?

  Best regards

  Edward L. Haletky

  Host communities, VMware vExpert,

  Author: VMware vSphere and Virtual Infrastructure Security,VMware ESX and ESXi in the 2nd business edition

  Podcast: the Podcast for security virtualization of resources: the virtual virtualization library

  Hey Ed,.

  I see my Caron, there is a privilege 'CapacityIQ' in the category 'Global' of roles. What do you see in your environment? I do not see a role 'default' created by Caron, so think you must associate a user with this privilege. I'm running the 1.5.0 last version of Caron, if this can help

• University Complutense of MADRID and Weblogic users, groups, roles, and permissions

  Hello
  
  I could not get the AAU to honour the permissions of the user defined in Weblogic. Here's what I do:
  
  1. create a Weblogic group called "contributor".
  
  2 create a role in the UMC called "contributor" with permissions of read/write on the PUBLIC group
  
  3. Add a user in Weblogic called "testuser" and make him a member of the employee group
  
  4. connect to the Complutense University of MADRID as a "testuser".
  
  5 testuser has only the permissions "guest."
  
  UCM is NOT honoring the contributor of Weblogic group membership. The documentation says if I create a Weblogic group with exactly the same name as being instrumental in the University Complutense of MADRID, the permissions should be granted properly but I didn't actually work.
  
  Someone saw this? I would supremely, manage users and authorization in a unique place with a minimum of fuss.
  
  Thank you! -JDM

  Hello

  Stop the server of the University Complutense of MADRID managed and the WLS server.

  Start the WLS server, wait until it starts completely, and then start the server from the Complutense University of MADRID.

  After this test to see if the issue still persists.

  Thank you
  Srinath

• Cannot add permissions for users Active Directory - the directory access error

  Hi all

  VCenter, connected as long as user with administrator privileges on the server, Active Directory running I am can be used to add permissions for domain accounts and just get errors:

  Right-click on the data center & gt; Add authorization & gt; Select read-only & gt; Add users and groups & gt; Select the domain & gt; (the list is NOT populated with users)

  Among users, enter my account of user AD & gt; Click on check names & gt; "The following names are not found: xxx".

  Enter the AD user account in the search box & gt; Click Search & gt; "A general system error occurred: directory access error.

  The only son I can find or KB articles relate to the modification of the period of Active Directory.  I did, but it did not help.

  http://communities.VMware.com/thread/14150

  http://KB.VMware.com/kb/1010094

  Any ideas why I can't delegate permissions? I do not think we have group policies that are resticting access, but I don't know which of the log files I should I seek to find the real problem.

  Thank you

  Kevin

  Windows Server 2003 R2 Standard Edition, vSphere Client 4.0.0 build 162856, vCenter Server 4.0.0 build 162856, ESXi 4.0.0 build 181792

  The problem that I had was related to what service vCenter services were running as.  No doubt during the installation (for some reason that escapes me now) I had configured the VMware VirtualCenter Server and VMware VirtualCenter Management Web services run under the local administrator account.  Change these so they ran as system Local solved the problem, and then I have a list of domain users and assign them permissions.

  Kevin

• Automatic switching of WiFi in the cell for the data not work, requires a restart of the phone

  The phone is a peak of Geeksphone, and the version of the operating system is 1.4. The problem is with the automatic switching of the WiFi to cell for my data. If I take the phone outside the WiFi range, it does not acquire the data (2 G, Edge, H or 3 G) signal and so I have no data. I left for hours without success. The only solution is to reboot the phone, then outside the configured WiFi connections and it will collect data signal. When I re - get the WiFi area, it captures the network and without problems.

  I also had this problem with version 1.1. I upgraded to think it could be fixed, but he did not.

  Thank you, Ralph. There was an update available which appear not yesterday. After the installation, I get the options that you quote, namely to turn the cell data in the notification area. Thanks a lot for the tip and the quick response.

• Is there a way to force Firefox 4 to offer to remember and to remember usernames and passwords for sites that use the AutoComplete mechanism to block these offers and memories?

  locked by a moderator, 07/02/2012 - has survived its usefulness

  In Firefox 3.6.16 (and probably other earlier versions) could force FF to offer to remember usernames and passwords for many sites by editing the file ...\Mozilla Firefox\components \nsLoginManager.js to ignore site - asked deactivate autocomplete (_isAutocompleteDisabled returns false).

  FireFox 4 does not use this file, or a similar one that I could find.

  The result (FF ignores site trying to disable AutoComplete) is possible in another way or by editing another file?

  This bookmarklet makes the browser ignore autocomplete = "off" temporarily, allows to save passwords even on sites that use autocomplete = "off".

  Don't forget to bookmark password:
  
  https://www.squarefree.com/bookmarklets/forms.html#remember_password

• Why my drive hard Boot keep reading and writing for 20 minutes after the start?

  As the title says my HDD Boot continues to read and write for about 20 minutes after the start. Read and write up to 10 GB in the process. I would say a good way to destroy a disc. I have not seen this behavior in any other OS.

  10.10.5 OS version

  Model: Mac Pro

  ID: MacPro3, 1

  Processor: Intel Quad-Core Xeon

  Number of processors: 2

  Total number of cores: 8

  (Vivid RAM) memory: 8 GB

  Any help will be greatly appreciated.

  Thank you.

  Check Console.app and see what happens.   Could be something of a time Machine for Spotlight indexing to a process of runaway of an OS X or a bug in the application.