Dump the roles and permissions

Similar Questions

• Questioning the roles and permissions at the University Complutense of MADRID 11g

  Hello
  
  I have a query like the following:
  
  The user administrator can assign multiple roles to a user. If a user has multiple roles, the authorization becomes ___and _.
  Is this,
  
  A dependency
  Less restrictive
  More restrictive
  Subtractive
  
  Help, please.

  Looks like a certification test question :-)

  I think that the correct answers are Addictive and least restrictive
  (the user will receive the permissions based on the roles that he or she is assigned to the)

• Associate roles and permissions to users who are on a database

  Hello
  
  I want to achieve secure authentication I used the Configuration of the ADF, but I discovered that I can't put my users to my database. I can just create users with roles in Jdeveloper.
  
  don't you how we can put users in Jdeveloper and associate the roles and permissions?

  If you don't want to use the Adf security, you must use a custom security implementation or use a traditional J2EE security implementation.

  Remember, ADF is little wild for newbes, just be patient and read the documentation (it is useful).

  If you have any more questions, and then close the case.

  Jhon

• CUCM: Roles and permissions for Reset/restart of the phone or apply Config

  Can someone tell me what the authorization must be added to a role to allow a user to this role of restart/reset (or apply config - same thing really) a phone device?

  The popup once you press reset/retart or apply config shows just "user is not authorized to access this page."

  Thank you

  Ben.

  Hi Ben,

  What is your version CUCM? you use any custom for these end-users role which reset/restart?

  If so, please add privileges to read/set up-to-date for the resource ' Voice Mail pilot web pages "to the custom role and check.

  Please check this bug ID: CSCug29903

• Vcenter roles and permissions on files to export

  Hello

  I use the script to Gabe at low cost disaster recovery for export permanent folder, but when I checked to see if it exports all folders in my vCenter there seems to be some missing files... At first I thought that maybe the account I used to export was the role of administrator or role is has not spread downwards for missing files, but after checking, it was not the case.

  Code:

  --------------------------

  Function Get roles

  {

  Begin {}

  $authMgr = get-View Manager

  $report = @)

  }

  {In process

  {foreach ($role in $authMgr.roleList)}

  $ret = new-Object PSObject

  $ret | Add-Member-Type noteproperty-Name 'Name' - value $role.name

  $ret | Add-Member-Type noteproperty-Name 'Label' - value $role.info.label

  $ret | Add-Member-Type noteproperty-Name 'Summary' - value $role.info.summary

  $ret | Add-Member-Type noteproperty-Name 'RoleId' - value $role.roleId

  $ret | Add-Member-Type noteproperty-Name 'System' - value $role.system

  $ret | Add-Member-Type noteproperty-Name 'Privilège' - value $role.privilege

  $report += $ret

  }

  }

  {End}

  return $report

  }

  }

  Function Get-permissions

  {

  Begin {}

  $report = @)

  $authMgr = get-View Manager

  $roleHash = @ {}

  $authMgr.RoleList | %{

  $roleHash [$_] RoleId] = $_. Name

  }

  }

  {In process

  $perms = $authMgr.RetrieveAllPermissions)

  {foreach ($perm in $perms)

  $ret = new-Object PSObject

  $entity is get-view $perm. Entity

  $ret | Add-Member-Type noteproperty-Name 'Entity' - value $entity. Name

  $ret | Add-Member-Type noteproperty-Name "EntityType" - value $entity.gettype (). Name

  $ret | Add-Member-Type noteproperty-Name 'Group' - value $perm. Group

  $ret | Add-Member-Type noteproperty-Name "Main" - value $perm. Main

  $ret | Add-Member-Type noteproperty-Name 'Spread' - value $perm. Spread

  $ret | Add-Member-Type noteproperty-Name 'Role' - value $roleHash [$perm. RoleId]

  $report += $ret

  }

  }

  {End}

  return $report

  }

  }

  function {New XmlNode

  Param ($node, $nodeName)

  $tmp = $global: vInventory.CreateElement ($nodeName)

  $node. AppendChild ($tmp)

  }

  function {Set-XmlAttribute

  Param ($node, $name, $value)

  $node. SetAttribute ($name, $value)

  }

  function {Get-XmlNode

  Param ($Path)

  $vInventory.SelectNodes ($path)

  }

  [XML] $vInventory = ' < inventory > < roles / > < permissions / > < / inventory >.

  # Roles

  $XMLRoles = get-XmlNode "inventory/roles".

  Get-roles. where {-not $_.} System} | % {

  $XMLRole = new-XmlNode $XMLRoles 'Role '.

  Together-XmlAttribute $XMLRole 'Name' $_. Name

  Together-XmlAttribute $XMLRole 'Label' $_. Label

  Together-XmlAttribute $XMLRole 'Summary' $_. Summary

  $_. Privilege | % {

  $XMLPrivilege = new-XmlNode $XMLRole "Privilege."

  Together-XmlAttribute $XMLPrivilege 'Name' $_

  }

  }

  # Permissions

  $XMLPermissions = get-XmlNode ' inventory/Permissions.

  Get permissions | % {

  $XMLPerm = new-XmlNode $XMLPermissions "Permission".

  'Entity' of the series-XmlAttribute $XMLPerm $_. Entity

  Together-XmlAttribute $XMLPerm "EntityType" $_. EntityType

  Together-XmlAttribute $XMLPerm 'Group' $_. Group

  Together-XmlAttribute $XMLPerm "Main" $_. Main

  Together-XmlAttribute $XMLPerm "spread" $_. Spread

  'Role' of the series-XmlAttribute $XMLPerm $_. Role

  }

  $vInventory.Save ($OutFile)

  Depending on how deeply nested and common names are and would need to be analyzed, but essentially, Yes. If you re-create your folder structure to match your original vCenter, then you can apply the permissions in the appropriate folders and as long as it spread is set accordingly, it must inherit for sub folders similar to how they were put in the original vCenter.

  One caveat is that you must export both custom roles/privileges.

• Adding roles and permissions

  Hello

  I am trying to install a role and authorization in vCenter 4.1 so that another user of vCenter 'read only' access can display CapacityIQ. Documents say to seek a role capacity IQ, but I have not found one. By the documentation.

  Procedure
  1. reboot the vSphere Client.
  2. Add the global privilege CapacityIQ in a new or existing role.
  3 right click on the folder root of the server vCenter in the inventory tree and select Add permission.
  4 in the dialog box assign permissions, assign the new role or existing user that accesses CapacityIQ.

  The global privilege CapacityIQ there simply isn't. How can I add this to so I can grant the necessary access?

  Thoughts anyone?

  Best regards

  Edward L. Haletky

  Host communities, VMware vExpert,

  Author: VMware vSphere and Virtual Infrastructure Security,VMware ESX and ESXi in the 2nd business edition

  Podcast: the Podcast for security virtualization of resources: the virtual virtualization library

  Hey Ed,.

  I see my Caron, there is a privilege 'CapacityIQ' in the category 'Global' of roles. What do you see in your environment? I do not see a role 'default' created by Caron, so think you must associate a user with this privilege. I'm running the 1.5.0 last version of Caron, if this can help

• What a privilege it must compare the roles and the users of the model

  Hi all
  
  I want to compare the roles that I created in the model and the roles I have in the database,
  I want to know if is posible to compare objects that you have granted to roles between the model and the database.
  
  
  the problem is perhaps because the user I selected for the connection to the database has no privilege enough,
  could you tell me, please
  what privileges needs of the user of the connection in order to compare with the roles, packages and other objects in the physical model?
  
  Thanks in advance

  Hello

  I'm afraid, it is not possible to compare users, roles, or packages at the moment.

  David

• Where are the role and administrator settings stored?

  We had problems in the past that have brought us to re-setup of our site, including all administration settings and all roles and users. Of course, all this is saved somewhere. If we knew, we could backup info for easier restore if other problems ensue.
  
  Someone knows how to save the settings of the site?

  I got the following response on another forum:

  Quote:
  For a Web site that has been administered by Contribute (Publisher is not enabled), you will find a _mm folder in the root of the Web site on the server to remove. It is a specific case of contribute and it contains administrative settings, roles and users information.

  For CPS managed sites, the _mm folder holds the information on the parameters of Directors and role information. The user information from the sites are stored in the folder of the CPS database. The database folder in the location, next \Database.

• How can I save vCenter roles and permissions

  As you know the permissions and roles of vCenter are stored locally in a database of ADAM, even when the main inventory SQL server database is on a different system.   I backup my separately from SQL server database but do not save the local database of ADAM.  What is the best way to save the ADAM database if there are no backups at the hypervisor level of vCenter server? vCenter server is virtualized and unfortunately only in guest-backup agents are allowed by this company, no backups of VMDK.  Solutions of VADP are not allowed.   Thank you!

  This information is part of the VCDB as well, and if you save the VCDB you will be covered.  However, you can manually save ADAM if you wish.

  http://KB.VMware.com/kb/1029864

• University Complutense of MADRID and Weblogic users, groups, roles, and permissions

  Hello
  
  I could not get the AAU to honour the permissions of the user defined in Weblogic. Here's what I do:
  
  1. create a Weblogic group called "contributor".
  
  2 create a role in the UMC called "contributor" with permissions of read/write on the PUBLIC group
  
  3. Add a user in Weblogic called "testuser" and make him a member of the employee group
  
  4. connect to the Complutense University of MADRID as a "testuser".
  
  5 testuser has only the permissions "guest."
  
  UCM is NOT honoring the contributor of Weblogic group membership. The documentation says if I create a Weblogic group with exactly the same name as being instrumental in the University Complutense of MADRID, the permissions should be granted properly but I didn't actually work.
  
  Someone saw this? I would supremely, manage users and authorization in a unique place with a minimum of fuss.
  
  Thank you! -JDM

  Hello

  Stop the server of the University Complutense of MADRID managed and the WLS server.

  Start the WLS server, wait until it starts completely, and then start the server from the Complutense University of MADRID.

  After this test to see if the issue still persists.

  Thank you
  Srinath

• Problem with the role and the user; the user cannot see the table

  Hello forum,.
  
  I created a role:
  
  Enr_service CREATE ROLE;
  GRANT CONNECT TO enr_service;
  GRANT ALL ON tenants TO enr_service;
  GRANT ALL ON enr_service TO user;
  GRANT ALL ON sportsmen TO enr_service;
  GRANT SELECT ON test TO enr_service;
  
  and also a user:
  
  CREATE USER ENR1 IDENTIFIED BY password QUOTA UNLIMITED on USERS;
  GRANT enr_service to ENR1;
  ALTER USER ENR1 by DEFAULT ROLE enr_service;
  ALTER USER DEFAULT TABLESPACE USERS ENR1;
  
  I can connect to the database with this user, but when I try to query a table that has been granted access I get an error message:
  
  SELECT * ATHLETES;
  ORA-00942: table or view does not exist
  
  I don't see what I did wrong. Any help is appreciated.
  
  Sebastian

  user2019788 wrote:
  Hello forum,.

  I created a role:

  Enr_service CREATE ROLE;
  GRANT CONNECT TO enr_service;
  GRANT ALL ON tenants TO enr_service;
  GRANT ALL ON enr_service TO user;
  GRANT ALL ON sportsmen TO enr_service;
  GRANT SELECT ON test TO enr_service;

  and also a user:

  CREATE USER ENR1 IDENTIFIED BY password QUOTA UNLIMITED on USERS;
  GRANT enr_service to ENR1;
  ALTER USER ENR1 by DEFAULT ROLE enr_service;
  ALTER USER DEFAULT TABLESPACE USERS ENR1;

  I can connect to the database with this user, but when I try to query a table that has been granted access I get an error message:

  SELECT * ATHLETES;
  ORA-00942: table or view does not exist

  I don't see what I did wrong. Any help is appreciated.

  Sebastian

  This is probably because ENR1 isn't any table named ATHLETES and he did not qualify the name of the table with the schema name...

• Role and authorization in VC for each user

  Hello world
  I want to pull-out user role and permissions for all users exist in the VC findout this privilege they have and that members that they belong and also at what level of Powercli script in csv. Any help on this appreciated.

  Thank you
  vmguy

  You want to say that the XML file attached to your previous answer?

  Yes, I did. And it is empty (except for the XML framework).

  This seems to indicate that the script was not able to retrieve the roles and permissions.

  Led me to believe that the 'Get-View Manager' does not work for one reason or the other.

• PowerShell Script to add users and permissions to the ESX host

  Here is a script to add the user accounts...

  You have a script to add the permissions?

  1. Original by c_shanklin @ http://communities.VMware.com/message/1013362

  Function New-VMHostShellAccount {param ($Name, $Password = $null, $Description = $null, $PosixId = $null) $SvcInstance = Get-view serviceinstance $AcctMgr = Get-View $SvcInstance.Content.AccountManager $AcctSpec = new-object VMware.Vim.HostPosixAccountSpec $AcctSpec.id = $ $Name = AcctSpec.password $AcctSpec.description $Password = $Description $AcctSpec.shellAccess = $false # Enable shell access $AcctSpec.posixId = $PosixId $AcctMgr.CreateUser ($AcctSpec) # Create user Get-VMHostAccount |} Where-Object {$_.} {ID - eq $Name} # Write new user in the output stream just as New-VMHostAccount would be}

  1. Added by Timothy cutting

  $vcs = @ ($vcs) += connect-viserver "VCSERVER01" $vcs += connect-viserver "VCSERVER02" $vcs += connect-viserver "VCSERVER03" $vcs += connect-viserver "VCSERVER04" $vcs += connect-viserver 'VCSERVER05' $vcs += connect-viserver 'VCSERVER06 '.

  $user = Read-Host "authenticate - USER NAME" $pass = Read-Host "Authenticate - PASSWORD" $newuser = Read-Host "Create new user account" $newpass = Read-Host "Create New Password" $description = Read-Host "Create Description" $Id = Read-Host "to create identification number.

  $vmhosts = get-VMHost-Server $vcs | Sort-Object Name

  foreach ($vmhost in $vmhosts) {Write-Host $vmhost Connect-VIServer $vmhost - user $user-password $pass New-VMHostShellAccount-name $newuser - $newpass - $Description - $Id PosixId Description password}

  Take a look at create roles of directors by script.

  Here, I show you how to create a new 'role' and then how to assign this role, as well as accounts or shareholders as they are called in the API, entity.

  An ESX Server has 3 built in roles ('No Access', 'Read only' and 'Administrator'), but you can create your own roles with just the privileges that you need.

  Note that the VI Toolkit for Windows Community Extensions contain functions to manage roles and permissions.

  Extensions require to use PowerShell v2 CTP3!

• Portal of WC - need information about the Migration or DB tables for roles and users/groups.

  Hello

  We are to modernize the WebCenter portal for a client of 11.1.1.3.0 to 11.1.1.8.0.

  Anything can let me know the procedure of migration or the involved DB tables that store the roles and the "user groups &" under the administration of security.

  A manual level by recreating all roles and users and groups one by one is my last option.

  Thank you

  Jean Claude

  Hello.

  Do not recreate it manually.

  The documentation must guide for PS2 - PS7 migration explaining step by step what to do regarding the security / policies.

  Read it slowly and carefully.

  Using WLST backup/export/import of your policy store scripts / qualifications.

  Following links can help you understand the WLST Scripts for the migration of security:

  http://docs.Oracle.com/CD/E29542_01/core.1111/e10043/addlsecfea.htm#JISEC3639

  Custom security infrastructure controls WLST - 11g Release 1 (10.3.6)

  We have migrated many times of 11.1.1.4/5 to 11.1.1.8. Always on the PS3 (11.1.1.4) version.

  11.1.1.3 to 11.1.1.4 was the biggest change from my point of view. I never had the opportunity to PSx PS2.

  For migration tasks, my recommendation is to ask for doubts or things not clearly in Support of Oracle documentation.

  Kind regards.

• Roles and responsibilities of dba oracle in the development team

  What should be the role and responsibilities of dba oracle in the development team?
  
  Application dba should have identification information of the oracle db box on user?

  Hi, working as a Application DBA as production s/n, while the resolution of problem ALS would not apply to them. Apart from this change in the pressure of the team will be there.

  These are points to remember.
  Test Db creation for the environmental testing,
  Replication of schema of POC
  replication of the DB for the installation of the interface.
  User, space management.
  Roles and security management
  Space of prediction - this will be useful when you estimate for storage
  you will need to give application implemented for the Production DBA with correct specification.
  store schema changes
  Ensure that shas good script to provide the DBA of Production team.
  Deployment of the application.
  performance optimization...

  All the environment memory /CPU statistisc need to check at regular intervals. If issues to escalte the INFRASTRUCTURE team

  HTC

  Tippu