Culture

Similar Questions

• Photos.app: Are the functions 'culture' and 'rotation' jpg lossless?

  For jpg files, there are ways without loss to change.

  https://en.Wikipedia.org/wiki/JPEG#Lossless_editing

  For example rotations and cultures.

  My question:
  Are the functions for jpg lossless ' rotation' and 'culture'?

  Thanks for your help.

  All changes in the Photos are lossless, except if you use photo editing extensions.  Photos stores the original images and a description of the adjustments to be applied to the picture, and if you add more settings, all changes will be calculated from the original main image file. YOYYu can always undo changes and revert to the original.

  However, if you export the edited pictures version, the final version will be made to TIFF to JPEG, and the amount of the losses depend on the JPEG quality you select or the size in pixels.

  Export a cropped or rotated image will result in a smaller file size.

  But while the picture is in Photos all settings are stored in the photo library without loss.

  If you use Photos of externally modified image photo editing extensions will be returned in a new and more original image file the original image file. You will still be able to return to the originl, but no longer be able to cancel all the menu sepaarately sub-mode.

• Photos for iOS change the orientation of the cultures

  How can I change the orientation of the culture of the landscape to portrait on a landscape photography. That Exchange crop 6 x 4 to 4 x 6 to create a photo portrait.

  I can do this in the application Photoshop Express, but not in the Photos app.

  I use iOS on iPad Pro 9.3.2.

  Concerning

  Schof

  Hello. This article may be useful: iPhoto for iOS (iPhone): culture, straighten, or rotate a photo

  Info taken from this article:

  To crop the photo, do one of the following:

  • A photo of a standard (or size) image format, the value such as 2 by 3 inches: touch > size.
  • Customize the size of the image and the positioning of the photo: drag the edge of the photo to change the size of the image, and then drag the picture to reposition in the framework.
  • You can pinch with two fingers to zoom in and adjust the picture inside the frame.

• "Name of file or assembly ' System.Windows.Forms, Version = 2.0.0.0, Culture = neutral, PublicKeyToken = B77A5C561934E089", or one of its dependencies was not found

  Hello

  Im having a problem. I write a program in Visual studio 2008 c# for Windows CE language in a machine of liliput.

  When I run the program in windows 7, I have no problem, but when I try to run my program in Windows CE I get the following exception (the projecto for Windows CE was created to run in this operating system):

  MissingMethodException is unmanaged

  "Name of file or assembly ' System.Windows.Forms, Version = 2.0.0.0, Culture = neutral, PublicKeyToken = B77A5C561934E089", or one of its dependencies was not found.

  The references from my program are:

  mscorlib.dll (Version 2.0.0.0) (length versio 2.0.0.0) - this dll do not exist in the program for Windows 7, appeared when I created the project for windows CE

  NationalInstruments.Vision.dll (Version 11.0.35.102)

  NationInstruments.Vision.Common.dll (Version 11.0.35.102)

  System.dll (Version 2.0.0.0)

  System.Data.dll (Version 2.0.0.0)

  System.Deployment.dll (Version 2.0.0.0)

  (Version 2.0.0.0)-System.Drawing.dll

  System.Windows.Forms.dll (Version 2.0.0.0)

  System.XML.dll (Verision 2.0.0.0)

  Throughout this reference is the Version of the Runtime: v2.0.50727 (it is the versions of Windows CE of liliput machine can run?)

  Can someone help me? I don't know why I get this exception

  Thank you for your help

  Hello UH and thank you for your message.

  I'm sorry I don't really understand what you are doing, you develop applications with Visual Studio 2008 and then deploy it on Windows CE or use directly in windows THIS? (I ask that, because Visual Studio is not supported on Windows CE: http://www.microsoft.com/en-us/download/details.aspx?id=7940)

  In addition, what device OR do you use? What is the fat of your project?

  Thanks for the responses,

• property editor - apply a so-called invariant culture

  Hello

  I have a property with the following configuration editor:

  object: scatterplot

  property name: PointSize

  The problem is that its representation depends on the locale, for example:

  Spanish is: "5; 5"

  United States of America is: '5, 5'.

  So how do the invariant culture to represent always the same way?

  Hello

  Write this piece of code at the beginning of your code.

  Thread.CurrentThread.CurrentCulture = new CultureInfo ("", false);

  This will make the locale to be set to read-only. But this causes culture to be invariant in the thread.

  I hope this helps.

  Habim stone

  National Instruments

• HP connection manager exe. Could not load the Assembly system.data, Version = 1.0.61.0, culture = SQ Lite...

  have new laptop dv7 and continue to receive the window... HP connection manager exe.

  "Cannot load the Assembly system.data, SQ Lite, Version is 1.0.61.0, culture = neutrral, db937bc2d44ff139 = public key token.

  The application will now exit.

  Please identify your laptop / pc

  Look at the basic/back/side of the pc/laptop to the sticker with barcode.

  Item number of pole 2 as seen on the following example of label with barcode of a HP laptop. The barcode on your HP product may be slightly different in appearance, but will still have important information necessary for us to help you.

  #Do not post not the serial number of your product because it is private and considered to be personal information. ###
  
  Display the version of the operating system installed (State whether 32 or 64 bit) and the processor as one product AMD or Intel

  Not showing information as requested could delay our responses and troubleshooting slow the question that led you to create a thread. We want to help you, so please help us help you.

  Have you gone to your laptop's web support portal and tried the HP software box software?

  This would certainly be a good starting point.

  Removing and reinstalling the software HP Connection manager is also a good plan. It is also located on the web portal of support for your laptop.

  Best regards

  ERICO

• ENVY 100 scans documents and photos cultures, regardless of where they are placed.

  ENVY 100 scans of documents/photos cultures. Preview is fine, but not the final result. With the help of Mac OS 10.7.5.

  This scanner has always cropped my images or documents, even if then I see very well in the preview. Right now I'm scanning my passport. I have it lined up against the side (as it shows on the drawing on the scanner) and I see the entire image on the preview. However, when it comes to the final image, I get a version cropped my passport.

  Where can I go to fix this?

  Hello
  The default analysis workflows configured to scan photo 6 x 4 in. make sure you change the scanning settings to not crop the area swept as follows:

  1 open the HP utility and select your device.
  2. based on Scan Settings open the "Scan to Computer".
  3. click on the tab "scan tasks.
  4. Select the shortcut Scan allows to analyze, and then click on edit.
  5. in the section of scanning from an HP device, click the blue triangle or button view details to expand the menu.
  6. in the expanded menu now, open the drop down next to cultures in and asA4 or None value.
  7. click OK and try to scan.

  If you get an error when trying to change shortcut scan patch installation, and then follow the steps above to the following:

  http://FTP.HP.com/pub/softlib/software12/COL41827/MP-101648-1/HP_Scan_for_Mac_OS_X_10.7_Update.dmg

  Kind regards
  Shlomi

• "Error: could not load file or assembly ' WMIControlLibrary, Version = 1.0.0.0, Culture = neutral, PublicKeyToken = null ' or one of its dependencies. The system cannot find the specified file

  Hey all,.

  I have a user running windows Xp Professional with service pack 3. The user gets the following error message when it connects to the computer every morning. "Error: could not load file or assembly ' WMIControlLibrary, Version = 1.0.0.0, Culture = neutral, PublicKeyToken = null ' or one of its dependencies. The system cannot find the specified file. The only thing that seems to not work is calendar Office Print Wizard. I deleted this file and the problem persists. Also, I have not found anything in the case where the viewer that relates to this error. The only mistake I found was an issue with the .net framework. I removed all the facilities framework and their updates. Restarted the computer and ther error disappeared and was replaced by errors in programs that require this file to work. I reinstalled .net framework 2 and returns the error. I left all the machine off separation executives. I did a repair on the .net framework without change. I'm not quite sure that the .net framework is the problem though. I guess that if just. At this point I don't know where to go from here how to solve this problem. Anyone got ideas?

  Hi tripleb316,

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 2: Scan the file system (CFS) auditor to repair corrupted files.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

• Could not load file or assembly ' System.Data.SqlServerCe, Version = 3.5.1.0, Culture = neutral, PublicKeyToken = 89845dcd8080cc91 "... error so that the HD writer AE 3.0 graphic opening programme"

  Original title: could not load file or assembly 'System.Data.SqlServerCe, Version = 3.5.1.0, Culture = neutral, PublicKeyToken = 89845dcd8080cc91' or one of its dependencies

  Hello I am looking for a way to solve:

  Could not load file or assembly 'System.Data.SqlServerCe, Version = 3.5.1.0, Culture = neutral, PublicKeyToken = 89845dcd8080cc91' or one of its dependencies.

  This message appears whenever I try to open a graphics program HD writer AE 3.0

  I'm running xpsp3 and all updates are underway according to Microsoft

  Hello

  1. were you able to use the program without any problem before?

  2. don't you make changes on the computer before this problem?

  Step 1: Repair of .net framework and check.

  Reference: http://blogs.msdn.com/b/astebner/archive/2008/08/28/8904493.aspx

  Step 2: Uninstall and reinstall this program.

• How can I change the duration of an MP3 file I downloaded? For example, I have a song that 1.5 last minute, but I want to only keep the 21 seconds. How can I culture there?

  How can I change the duration of an MP3 file I downloaded? For example, I have a song that 1.5 last minute, but I want to only keep the 21 seconds. How can I culture there?

  Your best bet would be looking for writers to mp3/wave. There are a few very good freeware/shareware sound there. I suggest this so that you can choose what format you want to save your file cropped as.

• culture.dll

  I continue to receive the followimg error message and don't know what to fix:

  C:\WINDOWS\Microsoft.NET\Framework\v4.0.30319\culture.dll is not designed to run on windows or it contains an error. try to install the program by using the original installation media or contact your system administrator or the provider of software for support. I don't know what this applies to the but returns shows before the weather channel is displayed. If it's the weather channel application you could tell me how to remove the application of weather channel? You can provide any help is greatly appreciated because of me being a novice with computerd

  Hello

  Method 1:
  Try the SFC (System File Checker) scan on the computer.
  Reference:
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833
   
   
  Method 2:
  You can try to uninstall reinstall the app and check:
  Reference:
  Uninstall or change a program
   

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

   
   

• Want to printer 4500: 4500 photos of cultures of phone

  I am trying to print pictures directly from my phone in the form of 3 x 5 cards, but they come out with quite a lot of the image cropped instead of the whole photo, how do I change the settings to get the majority of the printed photo?

  Hello

  Because of differences in proportions between the phone and the media of photography, there is always a level of culture.

  To get more options like adjusting α page and other options of cropping that you will get close to the result desired, hoefully please download the hp eprint app and print from the app.

• About 5% of the cultures my Windows Media Player completely round images

  My Windows Media Player of the cultures of the images on all four sides by about 5%.   I noticied first on a newly created slide show photos.  The slideshow is well on other computers and on a VLC Media Player.  Windows 7 computer is three weeks old and came with Windows Media Player.  I tried to turn off Windows Media Player via Control Panel, restarting and then turn it back on, but the problem remains.

  Any ideas?

  Tom haki

  Make sure that your graphics card driver is an update. You to visit the manufacturer's Web site to download and install the latest graphics driver.

  Check the following settings: -.

  In the menu WMP:View, video size, video made the player when resizing

  View menu, video, good player to the video size

  Open WMP > tools > Options > Player tab > uncheck "allow the screensaver during playback.

  Eventually, you may need to reset the WMP 12

• Did not find the manifesto for the en-US culture.

  I am trying to Remote Desktop in Citrix to work and I get this.  I have a new computer with Window 7 Ultimate in a Mid Tower.  I don't want to add a profile on my computer and I get the follow-up message after running sxstrace.  On the old computer with XP it's the same thing, so I added a profile, which makes me go through login and it works that way.  I will not allow a profile on my new computer.

  Here is the error on my new Windows 7 computer.

  NEWS: Try to detect manifest to C:\Windows\assembly\GAC_32\Microsoft.Windows.Common-Controls\6.0.0.0_en-US_6595b64144ccf1df\Microsoft.Windows.Common-Controls.DLL.
  INFO: Found no manifesto for the en-US culture.

  Is it possible that I can get this common = controls.dll on my computer?

  I spent a lot of time on it and if I don't use my old computer, then I won't be able to work from home.

  This is my home computer and I shouldn't have to put in place the way I don't want.

  Please can someone help me on this.

   

  Hello

  The Microsoft Answers community focuses on the context of use. Please reach out to the business community of COMPUTING in the TechNet forum below.

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

• Microsoft.Ink Version = 1.7.2600.2180, Culture = neutral, PublicKeyToken = 31bf3856ad364e35

  We just bought Bluebeam version 9 for a Sony 64 bit laptop. Whenever I want to use it I get the message "could not load file or assembly 'Microsoft.Ink, Version = 1.7.2600.2180, Culture = neutral, PublicKeyToken = 31bf3856ad364e35' or one of its dependencies." The system cannot find the specified file. »

  Can I use the 32-bit version, but it's not all I want.

  Any help here on what I need to do to fix this?

  Susie

  Hi Gert-JanRotscheid

  
  The program does not seem compatible with the 32-bit and 64-bit operating system versions. Also the problem is specific to the program I suggest you to contact the manufacturer of the Bluebeam program for assistance on the issue.
  See below for the link-

  http://communities.Bluebeam.com/

   

  I hope this helps.

• How can I culture a map in MapPoint or

  How can I culture a map in MapPoint or?  I need just to a map of Wisconsin, and MapPoint only allows me to zoom / zoom out.  I want to be able to show just Wisconsin.  Make the territories does not work because it makes the territory and do not crop the map we set.  In addition, how can I reframe certain counties so that it is just the counties I work with are on the map?  MapPoint help is very poor!

  There is an excellent complement MapPoint: MapPoint IC-ShapeManager.
  Take a look at the Manual. You can download the tool.

  Kind regards
  Manfred Sundorf

  PROFIT100 Consulting, Germany
  http://www.profit100.EU