Current automatic synchronization... 12 hours later!

Hi all

I have an automatic synchronization, who drew a large amount of data. Sometimes, this makes the auto sync fails and we do it in smaller batches.

This time it just shows current and has been since last night. It is causing all other auto synchs to be queued: so given is accurate as of yesterday.

Someone has had the experience of something like that? Any resolution. Support my case has worsened, but has no update...

Hi Jennifer,.

I checked your case in our support queue and this should now be resolved. Please let us know through the case if it is not.

Thank you!

Jeff

Tags: Marketers

Similar Questions

  • Automatic synchronization works only on Firefox Android?

    I noticed that my open tabs does not automatically synchronize as it does when I move desktop to my Android device. Example scenario to better explain this:

    I'm on my desktop Firefox with several tabs open. Can I retrieve my Android (4.2 Jelly Bean) device and open Firefox Android and I'll open new tab and chose the 'Sync' menu, unfortunately tabs it shows from my device of office are not aware at all.

    In fact, the only way I found to synchronize these tabs is to go on my Android in Sync-> Firefox Sync-> Menu button-> synchronize now. Then my tabs to perfect day, but should not only that automatically, or less than a law of button "Synchronize now" in Firefox Android? Am I completely missed something obvious?

    Thank you!!

    Hello, there seem to be / have had problems with the load on the server and missing ability to sync and auto-sync so was limited to once every few hours...

    https://Twitter.com/mozservices

  • Windows 7 home started an update on 5/10 which were 19 updates. 10 hours later it is still updating.

    * Original title: last update of Windows 7

    Windows 7 home started an update on 5/10 which were 19 updates.  10 hours later it is still updating. It seems that it is locked on the number 16.  How to exit the update?  What should I do after that?  I understand the update KB3004394 could stop other updates of the installation.  What is the problem?

    Hi James,

    Thanks for posting your query on the Microsoft Community.

    As described in question, it seems that you can not install updates and it get stuck at 16 of 19, this problem may occur if one or more of the following conditions are met:

    1. The Windows Update database is damaged.
    2. Antivirus software is configured to scan the folder % Windir%\SoftwareDistribution.
    3. Service (BITS) Background Intelligent Transfer Service does not receive a content link header.
    4. A required system file is incorrectly registered.

    If it helps, try the methods and check them off below.

    Method 1

    If I'm wrong, you tried not Troubleshooting Windows Update below to solve your problem and if this isn't the same link, then try to run the troubleshooter.

    Open the Windows Update troubleshooting tool

    http://Windows.Microsoft.com/en-in/Windows7/open-the-Windows-Update-Troubleshooter

    Method 2

    Step 1

    If the problem persists I suggest to reset the Windows Update components and for this, try to run the fixit described in the following article. If you already tried the fixit even before that I ask of you rerun the fixit.

    How to reset the Windows Update components?

    http://support.Microsoft.com/kb/971058/en-us#LetMeFixItMyselfAlways

    Step 2

    Try to follow the steps in the Microsoft Article and check if it helps.

    Problems with installing updates

    http://Windows.Microsoft.com/en-us/Windows/troubleshoot-problems-installing-updates#1TC=Windows-7

    Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

    Kind regards

  • I have two main e-mail accounts and mail is "forwarding" emails sent to one account to the other older account, they arrive a few hours later. Not sure why it's duplicate my emails at all. How can I stop this?

    Kind of hard to explain in the title... who probably is meaningless.

    Basically, I used to use a BTinternet email for any account. But over the years, I went to my iCloud email account. I have both implemented in mail because I still have the BTinternet account that is linked to many things, despite always use iCloud for the new things now.

    However, when I get a message that was sent to my new iCloud account originally, it appear a new message in my BTinternet a few hours later. And it's quite annoying! Makes me think I have a new email, but this is the one I read Twitter.com.

    It's as if there's some rule set up causing Mail to transmit all messages sent to my email from iCloud, to my BTinternet email. I have no idea why this is happening. There is no actual 'rules' put in place for this in my Mail preferences. Don't know what it could be.

    Any ideas?

    Check iCloud.com/Mail, click on the gear at the bottom left, select Preferences, then accounts. The iCloud account is set up to transfer emails?

  • How about automatically synchronization of e-mail filters in Thunderbird?

    I use Thunderbird on a couple of computers but I end up needing to create and update my filters on each machine manually. It would be nice to be able to automatically synchronize the filters for any changes or additional filters would be available on all machines. Even being able to export filters and import on another computer would be useful.

    There are modules of export and import of message filters, but I can't see right now that the of actively maintained.

    Alternatively, you can go on it by copying files between computers message rules. Each account has a file named msgFilterRules.dat who hold the rules for this account.

  • Unknown HP: restarted my laptop last night. It is still in restart 12 hours later.

    I restarted my laptop last night. It is still in restart more 12 hours later.

    loue161 wrote:
    I restarted my laptop last night. It is still in restart more 12 hours later.

    You need to press the power button for 5 seconds until you see all the lights turn off.  Then see if you can turn it back on.

  • X 1 update (02.022) Still downloading something 12 hours later

    My X 1 Player did an update last night to V 2,022. The two orange lights is released, full download, but it still shows a light green 'network' 12 hours later. When I checked "download speed" on the player, it has download something.

    I didn't order anything.

    If you get the oddity even can Sony or other X 1 owners to check their update and see?

    Thank you.

    Hello LeeSoFl,

    You are right, that the X 1 indeed download the content suggested in the background. However, you can limit the bandwidth consumed whole, or disable this feature in the menu "settings".

  • I closed and put my computer in its case after use. 3 hours later, when I went to use it again once I took the case and it was hot. It's on and he said "your computer was stopped because of a problem. Anyone had this happen?

    I shut down my computer and put it in its case after use. 3 hours later, when I went to use it again once I took the case and it was hot. It's on and he said "your computer was stopped because of a problem. Anyone had this happen?

    No. I have not experienced this before, after having turned off. It seems that your Mac was not completely extinguished before you he packed. Make sure that it is actually stopped before closing the lid.

  • How to automatically synchronize with the server?

    Sometimes, know that the computer time is delayed by 1 minute.

    Not the window with the server automatically synchronize? or I have to do it manually?

    Can be set automatically updated time by server?

    Does anyone have any suggestions?

    Thanks in advance for your suggestions

    It does it automatically. See http://i.imgur.com/KH7s4q9.png

  • XP slow at startup. Hour later WARNING ' Windows virtual memory Minimum too low. "

    Slow start of XP home on a Dell Dimension 8200 and seems better functioning after the virtual memory warning appears in an hour later.

    You can adjust your settings of virtual memory on your computer.  Indications are given in the following article:

    "How to set performance options in Windows XP"
      <>http://support.Microsoft.com/kb/308417 >

    (Skip down to the section: "Manually manage computer memory")

    HTH,
    JW

  • Windows Media Player version 11.0.6001.7010 with Vista. Problems with the automatic synchronization of music backup

    Windows Media Player version 11.0.6001.7010 with Vista. Problems with the automatic synchronization of music backup.

    Backup not working in all of these songs/albums that appear also in personal playlists. Does not account for all of the media/music in Windows Media Player. It is also not known where there are additional tracks from the same album, appearing in a personal reading list, these additional tracks (that is, it will take 2 album, but ignore the other 10). Has only begun to occur in 2-3 weeks.

    Previously, when I set up the sync partnership, there are options in playlists 'Sync' discovers the device Set Up, such as 'All music' 'All images' "5 * appreciation of music" etc. None of them showing now also available. Offered only my personal Playlists. All solutions?

    Hi Phil,

    Thanks for posting your question in the Microsoft Community forum. I understand that you can't auto sync in Windows Media Player. I'll help you with this problem.

    Before troubleshooting, provide us with information.

    1. don't you make changes to the computer before this problem?

    2. have you updated to Service Pack 2 installed?

    3. don't you make changes to the computer before this problem?

    This problem may occur if there is an inconsistency in the system files related to Windows Media Player. Follow these methods:

    Method 1.

    Solve problems in Windows Media Player: http://windows.microsoft.com/en-us/windows-vista/troubleshoot-problems-in-windows-media-player

    Method 2.

    Open the troubleshooting Windows Media Player settings Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Click View all, and then click the Windows Media Player settings.

    Method 3.

    You can try to disable and enable the Media Player Control Panel.

    Steps to disable Media Player.

    (a) click the Start button, select Control Panel, click programs and then click turn on turn Windows features on or off. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    (b) to develop media features and uncheck the box next to Windows Media player. Click on ok and wait a few minutes to complete. Once this is done, restart the computer.

    Steps to activate the Media Player.

    (a) click the Start button, select Control Panel, click programs and then click turn on turn Windows features on or off. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    (b) to develop media features and check the box next to Windows Media player. Click on ok and wait a few minutes to complete. Once this is done, restart the computer.

    Method 4.

    You can run the Microsoft Safety Scanner to make sure that the computer is virus-free.

    Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

    Security Scanner warning: there will be a loss of data through an analysis using the Microsoft safety scanner to remove any viruses found.

    Additional information.

    Set up a device to sync in Windows Media Player: http://windows.microsoft.com/en-US/windows-vista/Set-up-a-device-to-sync-in-Windows-Media-Player

    Windows Media Player sync: Frequently asked questions: http://windows.microsoft.com/en-us/windows-vista/windows-media-player-sync-frequently-asked-questions

    If you need help on this particular issue or any other related Windows issue, let know us and we will be happy to help you.

  • Automatic synchronization and crashed apps does not

    For my Z1, after the last update of jellybean Android Xperia, some of my apps crashes. Even if you do not use these applications, it will give you a toast notification that "Unfortunately, (name of the application like facebook, chrome, tsunami of zombie, etc.) has stopped... '. "or something like that. I tried turning off the phone two times but its still the same thing.

    In addition, some of the apps that neexs to be synchronized does not give you a notification if there is an update, like gmail - not sure if you have an email unless check you manually, you don't know facebook - there is a message notification / unless that check it out you. I checked the settings and its all synchronize the value and also automatic synchronization is still enabled.

    Is there another way to fix it?

    Hello

    Try to restart your phone by press and hold the power button / stop and volume until what it does vibrate.

    If the apps crashes again, I suggest you reinstall the latest version of the software using PC Companion:

    http://www.sonymobile.com/update

    In PC Companion, press start on the support Zone > begin on updating the software of the phone/Tablet > press the blue link that says "repair phone/tablet.

  • Automatic synchronization of Z3C problems

    I have probably disabled autosync somewhere in the past, but can't find a way to turn it on.

    It seems that properties framework for using the data, but the menu is missing from the automatic synchronization option. Running on Android 5.1.1.

    Any idea how to get that back, as my Google account is not synchronized and it is difficult to use the calendar.

    Settings-> accounts-> point icon Triple on the right corner of the-> Enable Auto-sync data

  • Problem UZ2715H monitor: current input synchronization is not supported...

    Can someone help me with this problem? -"Current input synchronization is not supported by the display. Please change your entry in 1920x1080@60hz or any other listed monitor calendar date according to the characteristics of the monitor. "I get this message when I run a game (for example I always get this message with CS GO), there are a few games that works fine however.

    I have Nvidia GTX 580 graphics card, windows 7 64 bit, so my pc and the monitor are connected with DVI - VGA (for the pc) adapter and VGA cable to the monitor.

    I tried to update the drivers for graphics cards, changing the resolution of 1920 x 1080 60 hz troubleshooting display... still the same problem...

    Any solution will be appreciated.

    Ok. A DVI to VGA adapter will not work. DVI cannot convert to RFP via a straight through cable. So, your only option is this =
    Computer DVI GTX 580 on-->--> UZ2715H HDMI DVI to HDMI Cable to

  • Automatic synchronization filters

    I have several contact status I don't want to Eloqua. Can I use a "," to add several articles to a single line in the automatic synchronization filter. As in the screenshot below:

    Auto Sync.bmp

    I'm sorry. I think the answer is 'no' (I hope someone can tell me who will work).  The workaround is to create several auto synchs with different filter values.

Maybe you are looking for