Current running Windows Defender and other software antiviral at the same time?

Similar Questions

• Problem: Windows Security Center gives me a "alert" that my anti-virus is turned off, but I am running Windows defender and Microsoft Security Essentials.

  Windows Security Center gives me a "alert" that my anti-virus is disabled.  I have Win XP Professtional and'm running Windows defender and Microsoft Security Essentials times which I recently uninstalled, restarted the computer and reinstalled more updated.  I read related security problems, but I have not found a match.  I have a screenshot of the Win Security Center Alert, but unable to attach.  It is said: ' Windows found multiple antivirus programs on this computer, but they all report that they could be updated or disabled. " Click on the recommendations for suggested actions... [what I did without success, i.e. update.  «[I uninstalled, stop, rebooted and reinstalled and updated]»

  When I shoot to the top of MSE it says, "protection is enabled, and updated definitions.

  Windows Defender said: "Nothing detected" and "computer running normally."

  Before the uninstall and update, I ran System Mechanic from Iolo, who has done wonders for speed.

  Norman

  When it comes to antivirus software, you want one and only one installed and running on your computer.  Two or more may come into conflict with eachother and degrade performance.  I advise you to uninstall Windows defender and use soley mse.

  also I strongly suggest that you avoid using "PC optimization" tools.  They can help a little, but they often do more harm than good.

• Running Windows Defender and McAfee at the same time will cause performance problems?

  Will be running Windows Defender and McAfee Antivirus at the same time slow down my laptop, and it is necessary to run both at the same time.  I have windows vista.

  Hello

  McAfee is normally disable windows defender

  read this information on the Defender:

  ·                         If you use microsoft security essentials avg avira mcafee norton etc they disable the vista version of windows defender by default

  the basics of Microsoft security has its own version of windows defender

  and other anti-virus programs use their own particular type of application to scan for spyware and malware

  It of nothing to worry and is the default action, which is designed for them to do

  If the above does not apply to your machine to read the information on the below link on how to disable the windows defender service in vista or make an autostart to enable

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-service-in-Windows-Server-2008-or-Vista/

  and here is the method to remove it from startup in vista

  http://www.groovypost.com/HOWTO/Microsoft/Vista/remove-Windows-Defender-from-Vista-system-startup/

  and this is how you would normally activate or disable windows defender in vista from within defenders of own and options tools

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-for-Microsoft-Vista/

       and read this information to microsoft:

  Error message when you run Windows Defender: «Error 0x800106ba»

  http://support.Microsoft.com/kb/931849

  and if you need to change startup programs read this information on the other methods of doing it without using defender

  using msconfig read this tutorial;

  How to use MSCONFIG in Windows Vista

  Here's how to use MSCONFIG in Windows Vista to disable some unnecessary programs that load automatically at startup

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  and also try this program;

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services more

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  for a good anti-malware program try this FREE

  Download update and scan with the free malwarebytes anti-malware version

  http://www.Malwarebytes.org/MBAM.php

• In windows movie maker, failed to get the narration and music to play at the same time

  Hello
  I have followed the instructions to the T, but cannot get the narration and music to play at the same time.

  Hi Anataia,

  You are unable to play the music and narration at the same time, you can adjust the audio levels to determine which audio will play louder than the other in your movie.

  The audio settings by default in Windows Movie Maker is for the audio portion of imported video and any narration or music that you add to play at an equal level, but you can change that setting if it does not give you the balance that you want. To adjust the audio levels, follow these steps:

  1. Click on Tools, then the Audio levels.
  2. Do one of the following:
     • To increase the level of audio on the Audio track that is part of a video clip, drag the slider toward Audio from video.
     • To increase the level of audio that is located on the audio / music, drag the slider to Audio / Music.
  3. Click close.

  http://Windows.Microsoft.com/en-us/Windows-Vista/adjusting-audio-in-Windows-Movie-Maker-frequently-asked-questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-narration-to-your-movie

  Hope this has been helpful.

  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• Buy two planes? Photographic for 9.99 and 19.99 Indesign at the same time? It s less expensive than 49.99 with applications and I only need this two software

  Buy two planes? Photographic for 9.99 and 19.99 Indesign at the same time? It s less expensive than 49.99 with applications and I only need this two software

  Hello

  Yes, you can buy the plan of photography as well as one app In-design under the same account.

  Please check the link for purchase https://creative.adobe.com/plans

  Please go through the Adobe - General conditions of subscription as well.

  Hope this helps!

• Since the upgrade to Windows 10 and Creative Cloude 2015 (about the same day...), my pen (Intuos 5 Touch) is so much trolling and does more work with it. I downloaded the latest drivers. What should do? Thank you, Dany

  Since the upgrade to Windows 10 and Creative Cloude 2015 (about the same day...), my pen (Intuos 5 Touch) is so much trolling and does more work with it. I downloaded the latest drivers. What should do? Thank you, Dany

  Hi Dan,.

  Please ensure that your Pen drivers are up-to-date. (check the manufacturer's Web site)

  Also, what exact version of Photoshop and Lightroom are you using?

  Search for graphics card drivers update as well.

  Kind regards

  Assani

• Template file - y at - it an easy way to update the files related to a model, and download them (put) at the same time?

  First of all, I am a user of Adobe software for 20 years now.  I love the adobe range. I want to just clarify.

  Question... Template Files - y at - it an easy way to update the files related to a model, and download them (put) at the same time?

  Its been bothering me since I started using Dreamwever 10 years now, when you use template files to create small, who later turn wholesale websites. Whenever I update a template file I have to find each file in the files Panel, then download them. When I navigate through a lot of directories to find it can get a lot of time and boring.  Whey cant be just a button that does it? See the attached file.

  Is there a way to do this?  Any help would be appreciated.

  Thank you very much

  Andy

  

  The sync tool should do what you want (second "circular arrows" icon in the files window).

  Who checks your files against the files of the current server and download all that is changed. By default, is also download any file from the server which is more recent than your local files at the same time, but you can set it to 'Put the latest files remotely' rather than 'get and put newer files' and you should be good to go.

• So, now that the iPhone 7 no longer a listener, how can we charge the iPhone and listen to music at the same time?  There is an adapter that will be a separator so that the two things are possible?

  So, now that the iPhone 7 no longer a listener, how will we be able to charge phone and listen to music at the same time?  Will it be a card which will be a dispatcher?

  You can use a dock of lightning to reload everything using plug the dock integrated headset for listening to music.

  http://www.MacRumors.com/2016/09/08/lightning-dock-iPhone-7-charging-with-music/

• iPhone 7: how to charge and listen to music at the same time...

  The new iPhone is great! But a quick question that I can't find the answer to... In the car, I use the TomTom app and listen to the music on my phone. Because it must be reloaded when I use TomTom, I have a cable for music and one for the load. The new iPhone means that I can't load and listen to music at the same time? Or will there be some accessory available?

  Thank you!

  You can read what is known on the Apple site.

• iPhone 6 s - photo app does not allow users to take pictures and listen to music at the same time

  The repro steps:

  • iPhone 6 s - photo app does not allow the user to take pictures and listen to music at the same time

    Music app vs photo app

  (1) play a sound track in the music app
  (2) the swtich to app photo (on the "Photo" mode)
  (3) music stops

  Pandora app vs photo app

  1) turn on pandora
  2) switch to the camera on the 6s iphone app
  (3) stopping the music

  PLEASE FIX AS SOON AS POSSIBLE *.

  My iPhone stopped playing music when you take photos?

  Nothing to trouble since he was not taken in charge.

• If I click on "PIN to the browser" the sensitive axis is unselected and vice versa. I need object "PIN at the top of the browser" and 'sensitive pine' work at the same time. Any suggestions?

  In the latest version of muse to adobe, I have me against "PIN at the top of the browser" and 'sensitive pine' work at the same time.

  Now if I choose an object and the axis 'browser', "sensitive pine" is unselected and vice versa.

  The need is for the header with the logo and menu bar to be pinned to the top of the browser, so that the page scrolls in the header bar.

  Now when I click on the sensitive left axis for the logo and the sensitive right pin for the navigation bar, the "pin at the top of the browser" gets deselected.

  Any suggestions or workarounds will be appreciated.

  Kind regards

  Vijay

  Hi all

  Thanks for that bring to our attention. We will consider adding this feature in the future.

  RyanDoyle - it's an interesting hack you have found! Unfortunately, I wouldn't count on that it works like this in the future, as a bug which is to operate. If you drag the screen to change the width of the browser as a Muse, you'll see that the behavior of the elements in the status button (a menu, for example) is different from when exported. However, if you make a small change to your hack, so it should always work: set button "width sensitive" State instead. In addition, I don't see why all parts must be in separate to this job state buttons, but I've only tried a simple example myself.

  An another workaround I used is to create another, more breakpoint. For example, if I have a menu that is pinned to the top left of the browser in the dots stop, then in a breakpoint, I would pin in the center top of the browser. Normally, I wouldn't add more breakpoints, but there is a way that I found to work around the problem. Ryan workaround is perhaps the best way to go if you take my advice and use a status button sensitive width instead of the width of the browser.

  Hope this helps,

  Anna

• Copy and paste multiple fields at the same time?

  Is it possible to copy and paste several fields at the same time as in the employment history section or reference to an employment application?

  Hello Glenn,.

  You can right click on the domain and select 'Copy field' and can then slide it into position suitable in the document so that in the preview page.

  Let me know if that helps!

  Kind regards

  -Usman

• Malware 'non-genuine windows' shows and other software (Acronis) not said that this is the evaluation version when it is the paid-up version.

  I've been running windows 7 64 bit with SP1 and all the updates that are known for 10 months without any problem.  Now, a 'non-genuine windows' malware appear and other software (Acronis) not said this is the evaluation version when it's the fully paid for version.  What should I do to solve this problem.  Rick Rickard

  You must read the user final license agreement and you will find that the OEM licenses have restrictions. You need to understand.

  If you want to move windows from one computer to another, you need a full commercial license.
  This same problem is again this morning on another computer where he runs a real operating system from microsoft, Windows 7 32 bit SP!, more than 4 months.  Today he says that my win 7 op sys is not authentic.  This computer has been customized built so I was the first to install a sys op on it.
  
  
  After a diagnostic for the analysis report.

• I am running windows XP and leaned a book against the keyboard and the screen rotates 90 degrees.

  I am running windows XP and I bent down a book on the edge of the keyboard and somd combo of keys to touch at the same time shifted my moniter 90 degrees and now I can, t get the screen back to normal.

  Press Ctrl & Alt keys and use the arrows to rotate back.
   
  According to the graphics card on your computer, these can be alternatives.
   
  Right click on the desktop | Graphics options | Rotation.
   
  Right click on the desktop | Screen resolution | Orientation.
   

• Windows IPSEC and SSL VPN client on the same machine

  Matches (coexistence) installation of IPSEC and SSL vpn clients that are supported on the same computer, windows (XP and Win7)?

  As mentioned by Patricia and Jennifer (5 stars), you can install two clients on the same machine without any problem.

  The tricky part comes when you are trying to connect two clients at the same time, that's when you may encounter unexpected problems.

  However, if your intention is to install both clients and connect them individually and not at the same time, you'll be fine.

  If you have any other questions, please mark this question as answered and note all messages that you have found useful.

  Thank you.

  Portu.

  Post edited by: Javier Portuguez