C210 M2 Server

Similar Questions

• Drive of DVD in UCS C210 M2 Server does not

  Hello

  In one of our UCS C 210 M2 Server, the DVD player does not work. Whenever I use a bootable CD, it does not start using this CD. When I checked the option of boot command I don't see the CD/DVD drive. Then I checked in the BIOS and found that DVD player is not visible in the BIOS also.

  Is there anyway to make this work.   The CD/DVD drive is a SATA.

  Krishna.

  Krishna,

  If you do not see in the BIOS, try and make sure the SATA cable is in place in the DVD player and the chassis. Or, possibly, put back the cable.

  Thank you

  Dave

• Cisco UCS-C210 M1 accredited for Unified Communications server

  Hello:

  Our VAR tells us that HP and Cisco are splitting up.  We are an HP store today and 7800-H series MCS routers were a perfect fit.  Our VAR tells us now that he must go with the renamed IBM systems.  BUT I would avoid the IBM servers.  And attractive servers Cisco.  But I have been unable to determine if the Cisco UCS-C210 M1 server is certified for various applications of Unified Communications (Manager of Communications, unity, Cisco Emergency Responder, ICM, CVP, etc.).

  Has anyone heard of Communications deployments unified on the hardware of the UCS?

  Thank you

  Ken

  UCS blades are being qualified for management of the applications of the CPU now. The qualification of rack mount server is expected, specifically the C210 later this summar I think.

• DMM 5.3 on MCS - 7835 H 3 and DMM-FA-C210-K9 failover

  Hello

  We are working with a customer who wants to add redundancy to their existing environment of DMM. We initially deployed their solution on a Server 3 - DMS MCS - 7835H and finally improved to 5.3. Now, they want to add the failover and the DMM-FA-C210-K9 with DMM-FASW-52-K9 bought another partner. After sitting idle for several months they have committed to us to help find a solution.

  I see 5.4 is able to run on a virtual machine. I have the following questions.

  Can I upgrade the DMS MCS7835H3 v.5.4? Based on the upgrade document 5.4, it seems to corroborate.

  • If we can improve the MCS7835HE-DMS 5.4 failover will work with the DMM-FA-C210-K9 Server?

  Since they already have the DMM-FA-C210-K9 server, can it be used as a host VMware to run 5.4 practically?

  • If so, failover will work with the MCS - 7835H 5.4 3 - DMS Server?

  Ray,

  The answer to both your questions is no.  None of these options is supported.

  If you use a virtual host primary servers and failover must be virtual.  You cannot mix types here.

  Also the MCS 7835 is not supported in a failover deployment.  Only the DMM-SVR-C210-K9 as backend is supported by 5.4 tipping guide. http://www.cisco.com/en/US/docs/video/digital_media_systems/5_x/5_4/dms/failover_guide/dmsfailover.pdf .  However, the DMM FA C210 K9 can be used as the fallback server.

  Hope this helps

  John

• UCS-C210 M2 RAID 10 (1 + 0)

  Hello everyone

  I doubt that the raid 10 (1 + 0) that several sources indicated that they need 4 hard drives, however I have read elsewhere that are required to at least 2 disks.

  I could indicate if UCS C210 M2 Server is that you can configure RAID 10 with two 300 GB hard drives each.

  Thanks for responding.

  Duplicate thread

  https://supportforums.Cisco.com/message/3647100#3647100

• Best practices for the configuration of virtual drive on NGC

  Hello

  I have two C210 M2 Server with 6G of LSI MegaRAID 9261-8i card with 10 each 135 GB HDDs. When I tried the automatic selection of the RAID configuration, the system has created a virtual disk with RAID 6. My concern is that the best practice is to configure the virtual drive? Is - RAID 1 and RAID5 or all in a single drive with RAID6? Any help will be appreciated.

  Thank you.

  Since you've decided to have the CPU on the server apps, voice applications have specified their recommendations here.

  http://docwiki.Cisco.com/wiki/Tested_Reference_Configurations_%28TRC%29

  I think that your server C210 specifications might be corresponding TRC #1, where you need to have

  RAID 1 - first two drives for VMware

  RAID 5 - 8 hard drives within the data store for virtual machines (CUCM and CUC)

  HTH

  Padma

• Please share your entries on Eg1 and Eg2 dependence of voice messaging port to be hardware based or can be added on a basis of carta ala?

  Hello

  Please share your entries on Eg1 and Eg2 dependence of voice messaging port to be hardware based or can be added on a basis of carta ala?

  1 pls correct if wrong, the number of voicemail ports depends on which model of supported connection of the unit hardware is selected. In addition, the number of voice messaging ports cannot be added as a carta ala and it comes with the hardware.

  Eg1; with the unit Connection8.6 on MCS7845 standalone server would support 250 voicemail ports and if the connection of the unit is used in active-active mode then total 500 voicemail ports would be available with the cluster of connection of the unit.

  Eg2; On a platform of the UCS, the UCS C210 M2 Server connection unit 8.6 with capacity of 10,000 EGGS of voicemail, the voicemail ports would be available:

  (i.) the limits of stand-alone Configuration:

  • 150 ports G.711 and G.729a (combined TUI, VUI or TTS)
  • 35 ports iLBC or G.722

  (ii) limits for the active/active Cluster Configuration:

  • 300 ports G.711 and G.729a (combined TUI, VUI or TTS)
  • 70 ports iLBC or G.722

  (iii) EGGS during model for the Connection8.6 with 10000 EGGS Voicemail capacity 300 GB HARD drive unit is installed on UCS C210 M2 server, he would in his own assign vCPU = 4, RAM = 6 GB, vHDD = 300 GB 150 ports of voicemail and.

  If more than 150 voicemail ports are necessary, then we can have the Connection8.6 of the unit using the active/active mode, then 300 voicemail ports would be available.

  However, if the number of necessary voicemail ports is more than 300, then need to install, Connection8.6 20 000 unit model voicemail OVA on UCS C210 M2 Server capacity. This model has according to the capacity of voice messaging port:

  Stand-alone Configuration limits:

  • 250 ports G.711 and G.729a (combined TUI, VUI or TTS)
  • 60 ports iLBC or G.722

  Limits for the active/active Cluster Configuration:

  • 500 ports G.711 and G.729a (combined TUI, VUI or TTS)
  • iLBC 120 ports or G.722

  Concerning

  Sumit

  There is a hardware support and licensing aspect for the number of ports.  From a support perspective, the number of ports is limited by the physical server hardware (e.g., platform) or virtual resources (i.e., as specified in the files of EGGS).  However, the number of ports, you can configure is also based on how many ports you are licensed for the.  For example, you can have a server that can support 250 ports but if your license file contains only 16 ports then you will only be able to configure 16 ports on the system.  I have a scenario where a customer needed to add more ports; However, I don't think it would be a problem.

  When you talk about port capacities for the connection of the unit, I would recommend that you focus more on the ability of the server port unique compared to the ability of the cluster for normal operations.  Connection of the unit is designed as a cluster in active / active in the intention to provide 100% failover of services if a server is offline.  The recommended design is that the Subscriber must manage all calls with the possibility of overflow to the transformation Editor.  IOW, if you want to support 500 simultaneous calls on a consistent basis but each server is capable of supporting 250 ports on its own then only a failure of a server would immediately block 50% of services.

  Hailey

  Please note the useful messages!

• Riser PCI for C200 M2 Server

  Hello Experts,

  We need a server with 3 x full height and 2 slots PCI low-profile x. is possible to have this card riser PCI for UCS C - 200 M2?

  If Yes, what is the part number for this card, because I couldn't find in the cisco documentation.

  Thanks in advance,

  Mohammad

  It is not possible to replace the mount adapter card in a C200 M2 with one who can place 5 adapters.

  The C200 M2 is a 1U rack server. It comes with a riser card that can hold a full height and low profile card. There is not enough physical space on the 1U server to contain 5 cards.

  The C210 and C250 rack servers are 2U high and are delivered with a riser card which can accomidate 2 low profile and 3 adapters to full height, although in almost all the C210 and C250 configrations a low profile raid controller will occupy a connector low profile.

• C200 Server

  Can UCM and Cisco unity

  connection be installed on the same server of balde C200?

  UC on UCS servers is certified on C200 and C210 servers.  This is the RACK servers, no blades. 'B' series is blade models.

  Check out this wiki for more information:

  http://docwiki.Cisco.com/wiki/Unified_Computing_System_Hardware

  Kind regards

  Robert

• C210 M2, questions RAID, impossible to see readers

  Hello

  We have a server C210 M2, unfortunately the LSI RAID controller was not in order.  We bought a LSI MegaRAID 9261 - 8i separately as well as 2 x 0.75 m SFF-8087 cables to connect x SAS 5 readers, that we have to the server.

  We cannot get the RAID card to recognize all readers.  They are loaded into the drive bays 1-5 and the two channels on the LSI card is connected to the ports ' discs 1-4 "and"disks 5-8"to the Board of Directors.". "  I assured the integrated controller is set to ENHANCED within the BIOS and tried the RAID card in several locations.

  The card LSI or different cables to the Cisco card brand?

  Thanks in advance

  AS

  I had situations similar to what your experience solved using the Cisco cable provided.

  R210-SASCBL-002 = Long for C210 SAS cable (connects to SAS Extender)

  Thank you

  Responsible Dan

• Cisco UCS C210 M2: PXE - E61: Media test failure, check cable of

  Hello

  I'm working on Cisco UCS C210 M2 servers. I got 10 146 GB SAS HD with LSI MegaRAID Raid Controller. I did run the Raid Controller and choose RAID6. After that I installed ESXi and it said to reboot the server. Now, when I restart the server I get the following error message:

  PXE - E61: Media test failure, check cable of

  PXE - M0F: Exit Boradcom PXE ROM

  Restart, and then select proper boot service

  or Insert Boot Media in some boot device and press a key

  Any suggestions how I can solve this problem.

  Thank you.

  You will need to go into the Bios of the controller LSI MegaRaid (Ctrl + H) and select the option of virtual drives on the left. When the virtual command window opens, you must select the drive (Raid Volume) on which you want your drive master boot and underneath there will be an option to set as your boot device. Apply and save.

• Installing 2nd power C210 M1 - needed downtime?

  I have several servers UCS C210 M1 who have just a diet, I need to install a second.   Will I need to shut down the servers to install the second power supply?

  I found details about installing them here...

  http://www.Cisco.com/en/us/docs/unified_computing/UCS/c/HW/C210M1/install/replace.html

  and see that they're hot, pluggable but it is unclear if the interruptions of service is required to install a second delivery of pwr.  I think that it may be necessary to ensure that the system starts with two power supplies and so knows the configuration.

  Thank you

  Todd

  You need not turn off the server to install the second power supply.

• Not a huge C210...?

  Hello

  While having a look at the UCS C210 tecniques, I saw the server doesn't support 3 TB HARD drive... the server making it less powerful than, say that DELL 510, which can accommodate about 36 TB in a server rack mounting 2RU (obviously using these drives 3 TB, which are on the market for several months).

  I was wondering if there is any explanation about it.

  Thank you very much

  Just to add, these 3 TB in the Dell server disks are 3.5 ".  The current C210 M2 supports drives 2.5 ", then the capabilities are not as high.

  We intend to offer platforms that support disks 3.5 "and the larger capacities such as 3 to drivces next year.  Our strategy for the market has more customers making network/SAN startup, the densities of local storage was not an urgent priority, but he is coming for those who want it.

  Kind regards

  Robert

• UCS-C210 Firmware

  When I try to update the firmware via TFTP I get an error message Image_CRC_Failure on the web and CLI.  I tried to re - upload the image and I tried several versions of the image.  I also tried the upgrade via the web and I get to 5%, and the system hangs.  When I try to log in I get this error message: "this browser has already a MMIC session. Only one session is allowed by the browser. You must log on to the other session, connect with a new session. "I click on the link"Logout of the other session", but I can not always log in.  I have to completely power off the server for the Web to become available.  When I say "shut down", I want to say that I physically remove the cable from the back and wait 10 seconds.

  Could someone tell me please the right way with these 2 questions?  It is the first time that I had the chance to work with the UCS-C210 and I'm about to say that I'm not impressed because this isn't the first question that I met.  I like Cisco and I won't get that far right now.

  Any help is appreciated,

  Terry

  Hello Terry,

  These types of problems are usuing the fault of a Windows TFTP server cause CRC errors.   Have you tried downloading interface Web of another client by chance?

  Have you tried the HUU (Host Update Utility)?  It's an ISO you just go up and it will update all FW components as you like.

  You can get it here:

  http://www.Cisco.com/Cisco/software/release.html?mdfid=283862069&flowid=25882&softwareid=283850974&release=1.4%281C%29&relind=available&rellifecycle=&RelType=latest

  * Note the name of the file will be called something like "ucs -c200- huu - x.x.x.iso", but that's fine.  The C200 and C210 are the same basic architecture, and this package is compatible with both.

  As for your other questions, you can configure the MMIC to allow multiple connections: it's under Admin settings or Communication, I think.  By resetting the MMIC (not disturbing for the host operating system), you can clear all 'stuck' sessions.

  Let me know how you go and we'll get you squared away, I promise you.

  Kind regards

  Robert

• Connect a mounting rack system UCS stand-alone server

  Hello

  I read somewhere on the dcoumentation this server from Cisco to stand alone as c210, c250 can be attached to the UCS Interconnect fabric. Can some expert cisco shed some light in there?

  I think I know,

  I'll have to plug the UCS FI External rack mount FEX and Cisco servers connecting to the FEX. Can someone clarify?

  What are the system requirements for the configuration above to UCS?

  I configured ports UCS FI as server ports and connect them to an external FEX with Twinaxial cable. But the ports are the link down. Cable Twinaxial is supported? I have to do additional configuration that we do when you plug a Nexus 5000 on a FEX?

  Any help would be apprciated.

  Thank you.

  The connection to a server in a stand-alone rack details are covered in this doc

  https://supportforums.Cisco.com/docs/doc-15034

  Dave