Cursor LR 4 TEMP problem

Similar Questions

• CURSOR BLINKING WINDOWS XP PROBLEMS

  I have Windows XP Office. I have a master & slave to hard drives. When I start my computer, it displays a black screen with a cursor blinking in the corner. I would normally just re - install XP but I have VERY important information and don't want to lose him. I started it upward and went to recovery but still can not get it back. Y at - it a program or software that I can buy to recover my files? I was told to buy a "cable" that would eliminate the use of the crossing of riders (something that I don't know). Help, please! I'm not a computer pro, then you can use plain English (I know how to cut it on and turn it off)

  Hello

  ·        Remember to make changes to the system?

  ·        Have what measures you tried to solve your problem?

  ·         Have you tried to start in safe mode and check?

  I suggest you to check if the material physical connections are fine and if they are detected in the BIOS.

  I suggest you follow the methods mentioned below.

  Method 1:

  Start in safe mode and check if you are able to see the desktop. Follow the steps mentioned below.

  a. restart the system and then keep tapping F8 until you reach the start menu.

  b. Select safe mode from the list and press ENTER.

  Check if you are able to see the desktop.

  Method 2:

  Check in last known good configuration. Follow the steps mentioned below.

  a. restart the system and then keep tapping F8 until you reach the start menu.

  b. Select last good known in the list and press ENTER.

  Check if you are able to see the desktop.

  Method 3:

  I suggest you follow the steps mentioned in the article below.

  Computer stops responding with a black screen when you start Windows XP

  http://support.Microsoft.com/kb/314503

  Method 4:

  If this does not help, then I suggest do you a system restore recovery and audit. Follow the steps mentioned in the article below.

  How do I recover from a corrupted registry that prevents Windows XP startup

  http://support.Microsoft.com/kb/307545

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Profile Temp problem. Windows 7, area

  I have about 50 machines on domain with Windows 7 32 bit OS.  We are having a problem with windows not catch our default profile for three of our users and instead giving them a Temp profile whenever they log on to the domain.  One is a normal user account and two are admin.  All other users can connect on any computer at any time and they do not get the temp profile.  The three accounts get the temp profile any computer on the domain, they choose to connect to.  Any ideas?

  \Software\Microsoft\Windows NT\CurrentVersion\ProfileList I deleted the bad users and connected back with them and now everything works.  Problem solved.

• presacrin c700 temp problem

  After I cleaned the comp, the temp whent down, but I think that's not recomeded level.

  I use "fan speed".

  hd0 37 c

  Temp1 55 c

  Core 0 52c

  Windows 7 ultimate 32 bit

  only firefox running.

  any suggestions?

  These values are ok.

  You should be worried only when temperatures are above 70 degrees.

• Go to Windows 7 32 - bit on cursor wireless 3000 Y410 problem

  Hello

  I recently installed Windows 7 32 bit on my Lenovo Y410 and drivers work for the most part out of the box. However, I have a problem with the switch wireless slider. The switch does not respond when cold start (wireless stays off), but works very well to wake up from sleep mode. I tried Vista drivers of a Lenovo installation for the wireless card Intel, as well as the Bluetooth driver installation of BroadCom.

  Anything else I can try to install or change in the registry?

  Very appreciated

  tuks

  
  

• Windows 7 blank screen with cursor Hang (Nvidia driver problems)

  So, I tried to understand this for 2 days now and can't find a definitive solution. I'm running Windows 7 64 bit and my graphics card is a nvidia 9800 Gtx +. Whenever I try to update display drivers (I tried all the nvidia versions on their site for windows 7 64 bit drivers), during the restart I get the Windows Logo and then where he should go to the login screen, just blank with a slider that is mobile and never changes. I write of the same model, but I have just the driver value Standard VGA (Did it safemode). Any ideas?
  EDIT: I thought I might add, when I initially installed I had to use a friends video card to do finish, it would hang at the end of the installation. I swapped my card after the installation.

  I tried the drivers from EVGA, which is my card manufacturer. Not good. And on Windows 7 the default driver has not yet so why I had to standard VGA. I solved the problem by opting for an ATI Radeon HD 4870 instead, works perfectly. But it still bothers me that the drivers for the Nvidia card will not work with 64 bit vista or 7.

• Cursor and window break problems

  Hello

  I just started using CC animate but I have problems with the drawing with the Paintbrush tool and how some of the options/descriptions are cut off when you open a window (for example, ' preferences'). It was already like this after installation without changing the settings.

  I have used other products adobe Photoshop CC and after effects CC, but no such problems never happened.

  Brush/slider tool: whenever I try to use a brush, he jumps away. There is no way to make the line if I have to keep guessing where it will end.

  Window preference: when you are looking for in 'Préférences', some of the information has been cut and there is no way to resize to show all that. This happens to other windows in CC to animate.

  I've attached a video to illustrate the problems I encounter.

  If anyone knows how this can be fixed, please let me know. Thank you!

  You should be able to fix it by changing the setting of the display of the text to 100% on your machine.

• tablespace Temp problem

  I want to run this commnad all in one, I create PL/SQL, but I give the error and save the txt file and run of I also give me error when I complie and statements into a toad, it compiles successfully, please tell me how to create a procedure or block anoymous. because I wanted to create a task that runs automatically please help my in this regard, please tell me can we shrink in the temporary tablespace
  
  CREATE TABLESPACE TEMPORARY TEMP_new1
  
  RE-USE of 50 M SIZE TEMPFILE 'TEMP_new1 '.
  
  AUTOEXTEND ON NEXT 32 M MAXSIZE unlimited
  
  EXTENT MANAGEMENT UNIFORM LOCAL 32 M SIZE;
  
  
  
  ALTER DATABASE default TEMPORARY TABLESPACE TEMP_new1;
  
  
  DROP TABLESPACE TEMP_ABC INCLUDING CONTENT AND DATA FILES;
  
  
  CREATE THE TEMPORARY TEMP TABLESPACE
  
  TEMPFILE 'TEMP01.dbf' SIZE 50 M REUSE
  
  AUTOEXTEND ON NEXT 32 M MAXSIZE unlimited
  
  EXTENT MANAGEMENT UNIFORM LOCAL 32 M SIZE;
  
  ALTER TABLESPACE TEMPP add TEMPFILE 'temp02' SIZE 50 M
  AUTOEXTEND ON NEXT 32 M MAXSIZE UNLIMITED;
  
  ALTER TABLESPACE TEMPP add TEMPFILE 'temp03' SIZE 50 M
  
  AUTOEXTEND ON NEXT 32 M MAXSIZE UNLIMITED;
  
  ALTER TABLESPACE TEMPP add TEMPFILE 'temp04' SIZE 50 M
  
  AUTOEXTEND ON NEXT 32 M MAXSIZE UNLIMITED;
  
  ALTER TABLESPACE TEMPP add TEMPFILE 'temp05"SIZE 50 M
  
  AUTOEXTEND ON NEXT 32 M MAXSIZE UNLIMITED;
  
  ALTER DATABASE DEFAULT TEMPORARY TEMP TABLESPACE;
  
  DROP TABLESPACE TEMP_new1 including CONTENT AND DATA files;

  sql_stmt: = "ALTER DATABASE default TEMPORARY TABLESPACE TEMP1"

  you need to end the statement with '; '.

• change tablespace temp problem

  Hi guys,.
  
  my old temp tablespace was DMT and grown huge. So I created a new LMT one using a temporary file. I also modified the temporary tablespcae by default my database of TEMP2.
  
  Select distinct (temporary_tablespace) in dba_users
  
  TEMP2
  
  
  Now I'm trying to
  
  SQL > drop tablespace temp including contents;
  
  and it takes ages as expected. However, what I've noticed, is that this temp tablespace seems still to be used! It remains 100% free, and this one is free space is declining.
  
  is it possible for me to delete this file in the system files, and then start my nomount database and re-create the control file?
  
  Thank you

  Here my procedure I use to delete it and create a new temp

  create tablespace temporary temp2 tempfile ' / oracledata/DB/temp999.dbf' size 500M management of local measure;

  ALTER DATABASE by DEFAULT TABLESPACE TEMPORARY temp2;

  DROP TABLESPACE temp including CONTENTS AND DATA files;

  create tablespace temporary temp tempfile ' / oracleindex/DB/temp01.dbf' size, 1025M
  ' / oracleindex/DB/temp02.dbf' size 1025 M, ' / oracleindex/DB/temp03.dbf' size, 1025M
  ' / oracleindex/DB/temp04.dbf' size 1025 M, ' / oracleindex/DB/temp05.dbf' size, 1025M
  ' / oracleindex/DB/temp06.dbf' size 1025 M, ' / oracleindex/DB/temp07.dbf' size M 1025
  extent management local uniform size 1048576;

  ALTER DATABASE default TEMPORARY TABLESPACE temp;

  DROP TABLESPACE temp2 including CONTENT AND DATA files;

• Unknown cursor/drawing and painting problem

  

  (In the photo) appeared earlier today and I cannot yet understand how get rid of it. I can't draw, paint or select options on my picture - I can - with her even if I click on my different tools. I want that it to go, but I don't know what it is, or even to figure out how it got there. Can someone explain what it is and how to get rid of?

  It appears on objects that have the locked layer? And you try to use a tool, you can not.

  

• Firefox on Windows. When I click on a link, Firefox hangs up with a rotating cursor. Problem goes away by moving the mouse. This does not happen with IE.

  Using Firefox 27.0, when I click on a link, a rotating cursor appears and continues to run. Move the cursor will solve the problem. I had this problem for several versions of Firefox, and I use automatic updates.

  Please update Firefox, troubleshoot Add - ons and if this does not help, then do a clean reinstall.

  Thank you!

• Create a REF CURSOR as an array of display/temp

  Hello world

  I had to upgrade a number of Crystal Reports Using REF CURSOR as part of an ERP upgrade project. The new version of the ERP application supports more use of the REF CURSOR and only supports the use of views/tables.

  I don't see how I can rewrite the REF CURSOR (which are defined in the PL/SQL procedures), in the form of VIEWS / TEMP TABLES with a single call. That is to say when the user runs the report.

  Can anyone suggest a method of conversion of the REF CURSOR in view/Temp Table without the two steps, the steps to populate a temporary table and then, i.e. 1 - 2 - query the table in the report. ??? -I was looking at a Pipelining as an option but again could reach with only two stages, pre filling before running the report.

  Any advice would be greatly received.

  Kind regards

  David.

  I found a solution by creating a FUNCTION with a PIPELINED return cursor, and then create a temporary table in the result set. Not really ideal was to use a Pragma AUTONOMOUS_TRANSACTION, but will work for me.

  Thank you

  David.

• For the last week, I had problems on the Web pages in the browser look at a box itself (the box that actually shows the site), I can't click on anything anyone in the top thumb or inch - and a quarter. What does this, and how can this be repaired?

  This applies to all links and anything in this field unless it falls below, then I can click on it. The only thing that seems to get around it, is on a bar at the top of a Web search, I can click and type, but there is no text cursor.

  This problem occurs even when I scroll down, the same area of a Web site can be clicked, because of this problem.

  This does not affect the toolbars, bookmarks, etc..

  Recently, the Yahoo toolbar and the extension of Babylon have been reported because of this problem. They appear to overlap invisibly on the top of the display of the web page. You have both installed, uninstall or disable them / it or see if an update is available that solves the problem.

  • See-> http://support.mozilla.com/en-US/kb/Uninstalling+add-ons
  • See-> http://support.mozilla.com/en-US/kb/Cannot%20uninstall%20an%20add-on
  • See-> http://kb.mozillazine.org/Uninstalling_toolbars

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  You have several older versions of Java installed Console Java did not clean up when updating. Follow these instructions to remove older versions:

  • http://KB.mozillazine.org/Java#Multiple_Java_Console_extensions

  Your old extensions Java Console:

  • Java Console 6.0.05 {CAFEEFAC-0016-0000-0005-ABCDEFFEDCBA}
  • Java Console 6.0.07 {CAFEEFAC-0016-0000-0007-ABCDEFFEDCBA}
  • Java Console 6.0.12 {CAFEEFAC-0016-0000-0012-ABCDEFFEDCBA}
  • Java Console 6.0.13 {CAFEEFAC-0016-0000-0013-ABCDEFFEDCBA}
  • Java Console 6.0.14 {CAFEEFAC-0016-0000-0014-ABCDEFFEDCBA}
  • Java Console 6.0.15 {CAFEEFAC-0016-0000-0015-ABCDEFFEDCBA}
  • Java Console 6.0.21 {CAFEEFAC-0016-0000-0021-ABCDEFFEDCBA}
  • Java Console 6.0.22 {CAFEEFAC-0016-0000-0022-ABCDEFFEDCBA}
  • Java Console 6.0.23 {CAFEEFAC-0016-0000-0023-ABCDEFFEDCBA}
  • Java Console 6.0.24 {CAFEEFAC-0016-0000-0024-ABCDEFFEDCBA}
  • Java Console 6.0.26 {CAFEEFAC-0016-0000-0026-ABCDEFFEDCBA}

  Not related to your question, but...

  You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Plugin check-> http://www.mozilla.org/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
  • Adobe PDF plug-in for Firefox and Netscape: Installation/update Adobe Reader in Firefox
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
  • Next generation Java plug-in for the Mozilla browser: install or update Java in Firefox

• Mouse cursor is not visible at all, Vista x 64 SP2.

  01/15/10, computer of my girlfriend automatically installed several updates Windows day and then blue screened. Updates appear to have installed successfully, but immediately after restarting, the mouse cursor has encountered a problem in that it is completely invisible except when positioned in the very upper left corner of the screen (an area of about 100 x 100 pixels, I guess). The only solution that I might know which allowed us to see the cursor anywhere else on the screen was to return to the path of the mouse pointer. Change the pointer system is no anything, either - every diagram shows the cursor like schema by default when I can see him at all (with the active pointer trails). It is really annoying, and it makes my girlfriend and me crazy. I want to keep the computer up-to-date, but if MS updates kill something so essential as the mouse cursor, I can't do it.

  Updates that were installed were:
  Updated platform for Windows Vista for x 64-based systems (KB971644)
  Microsoft .NET Framework 2.0 Service Pack 2 update for Windows Vista Service Pack 2... (KB974470)
  Update for Windows Vista for x 64-based systems (KB960362)
  Definition update for Microsoft Security Essentials - KB 972696 (definition of 1.71.2259.0)

  The system is a HP Pavilion Slimline with Intel Core 2 Quad Q8200 (2.33 Ghz), 4 GB of RAM, Vista 64 SP2 and the graphics card is a NVIDIA GeForce 9300 GE.

  Hello

  You can first try to check the mouse settings by clicking on Control Panel -> mouse -> Pointer Options -> uncheck the "Enhance pointer precision" and check if it solves the problem.

  Now you need to reduce the hardware acceleration on your computer and look for the number, to determine this, click on the view tab and then, under DirectX features, check to see whether DirectDraw, Direct3D, and AGP Texture acceleration appear as disabled. If this is not the case, try to reduce hardware acceleration.

  1. open the screen resolution by clicking on the Start button, Control Panel, and then, under appearance and personalization, click on adjust the screen resolution.

  2. click on advanced settings.

  3. click on the Troubleshooting tab, and then click on change settings.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  4 move the hardware acceleration to min slider.

  Now search for the question.

  For more information you can visit the link provided below.

  http://Windows.Microsoft.com/en-us/Windows7/diagnosing-basic-problems-with-DirectX

  Hope this information is useful.

  Thank you, and in what concerns:

  Suresh Kumar-Microsoft Support.

  Visit our Microsoft answers feedback Forumand let us know what you think.

• Impdp related problem

  Hi all

  I have a simple problem. I have a dumpfile impdp to a log file schemas.but found clues are not created because of tablespace temp problem. In the import log file, I had the name of 4 index.

  Now, I want to import only the index of the dump file. Would it not possible.

  Plase share with me your valuable knowledge.

  Thanks in advance.

  Piku.

  Hello

  Just the command set query parameter include = index and try, if you select a specific index:

  Impdp system, / * dumpfile anar.dmp directory = Data_Pump_Dr = include = index content = metadata_only

  OR

  Impdp system / * directory dumpfile = anar.dmp = Dta_Pmp_Dr include schames_name.a, b, c, d =

  a index_name

  b_index_name

  c index_name

  d index_name

  Thank you