Curved line - curved on both sides?

Similar Questions

• Ticks on both sides, CWGraph 3D axis values

  Hello

  I use Surface.vi 3D terrain surface 3D in CWGraph3D control. I put the Direction to the view (top) X - Y plane. I am able to check you for ticks on both sides of the lines, but I don't know how to duplicate the value labels and ticks (see attachment).

  Any help will be greatly appreciated.

  Best regards

  Martin

  -Sorry I did not mention the details. In 2015, LabVIEW, and I believe that it requires Full Development System
  -https://zone.ni.com/reference/en-XX/help/371361M-01/lvpage/3d_graph_properties_db/

• Why is my screen blurry and lines undulate on the sides? It also keeps the glitter!

  Why is my screen blurry and lines undulate on the sides? It also keeps the glitter!

  Is your very large monitor, like an old TV or flat, as perhaps a few inches thick?  If it is very deep (front to back), you have an old style monitor, and they need to be demagnetised every now and then. Look on the monitor for the menu button and navigate until you find an icon like a horseshoe with a bar slash through it (or like a magnet) and select it.  All wavy and colorful display for one minute and then went back to normal. Also, make sure that all the cables between the monitor and your computer are firmly connected at both ends, even if you have a thin screen.

  If you have a laptop, try to turn the screen and see if the blur changes.  If so, you might have a connector loose inside and may need to be considered at a repair shop. =(

  Best luck!

  (There is a small chance it is a result of burn; made me know if any of them help you, or that they do not apply.)

• I can't print on both sides!

  Hello

  I have the printer for 5 months and I've been printing with the unit duplex - two-sided printing option.

  A few days ago I tryied to print as usual on both sides of the page and I can not turn 'ON' the option for using the option two faces.

  I'm on mac and I tried to restart the printer and follow instraction on HP - the guid line, re - install the duplexer and it still does not.

  It is the copy of the scren on my mac:

  What option I have?

  I bought this printer just because both sides option.

  I still have my warranty on the printer and it's the priner info:

  Please let me know.

  Thank you

  Yotam Saban

  Hi Yotam,

  If please try following the steps below and check if this can help:

  1. check that duplex printing accessory has been installed correctly. To check this open system preferences and go to Print & Fax. Open the print to your printer queue. Click Printer Setup and in the tab menu choose driver. Make sure that the box next to HP printing accessory (duplexer) sides.

  2. on the file menu, select print. The print window is displayed.
  NOTE: The print window might be minimized. Click the blue triangle next to the name of the printer or on the button view details to see all the available parameters.

  3. in the print window expanded you will find next to Copies the checkbox for duplex. Select the check box.
  NOTE: If the check box does not appear in the specific application print dialog box, skip this step.

  4. to select the connection type click the selection box below, listed as the name of the program (e.g. TextEdit)
  Will appear as Copies & Pages within Microsoft Office applications.

  5. Select the menu drop down.

  6. set the duplex option as binding edge Long (Portrait) or binding Long Edge (landscape).

  You can save the settings for later use by clicking preset > save current settings as preset. By default, a used preset will remain until another preset will be used.

  Hope that helps,
  Shlomi

• How to stop a manual printing always print on both sides

  My new HP Photosmart ePrint printer still prints both sides when alone is necessary.  I put it in place for manual printing to save paper.  If I don't have only one line on the page it will make me print on both sides.  My older printer has been able to determine the necessary pages, why not this one?

  Hi Karen2968,

  The Photosmart D110A he does manual duplex printing.

  For that, you must follow the steps below.

  • When you tiring to print you must go the printer preferences.
  • Select Manual duplex printing.
  • Whenever it prints one side, you have to manually turn the paper to print the second page.

  Photosmart D110A has no automatic duplex.

  If that's what you are already doing and you encounter the problem, clear manual duplex printing and then turn it back on.

• Printing one or both sides of the paper

  I have a new Officejet 6500 has more all-in-one printer with the ability to print on both sides of the paper.  It is configured to print on both sides right now, and I want to be able to change the setting for single side or double side easily, if needed, but I can't find instructions on how to do it.  I tried clicking on 'options', 'preferences', 'properties' etc etc but nothing seems to give me the option to select single or double sided.  How can I do?  Advice please.

  Thanks Bob.  I already found a solution - there is a drop down window below the line in preferences menu that says "print on both sides", and if you select 'none', it gives unique back.  Not really intuitive, but I was given this information by another computer geek and it works!  Thanks for getting back to me well.

• All of a sudden started having a large margin on both sides of websites such as Facebook and Pinterest so everything is smaller in the middle. How can I change this?

  I don't know if I've accidentally changed something by mistake, but now most of the Web pages on which I'm going to have a margin of 2 inches on both sides which makes everything that should appear in a small space right in the middle of the screen. I would like to make the content of the pages to fill the entire page rather than just middle. How can I change this?

  You can reset the zoom of page on pages that are causing problems.

  • View > Zoom > reset (Ctrl + 0 (zero); 0 + Command on Mac)
  • http://KB.mozillazine.org/Zoom_text_of_web_pages

• ProBook 640 G1: Vertical line down the left side of the screen

  I have a vertical line on the left side of my screen on my G1 640 Probook - model number is T1C08UT #ABA.

  I've seen other similar posts and the suggestion was to plug an external monitor. I did it and the line does not appear when hung outside. Someone at - it any other ideas? I used product Wizard and all my drivers also show to date. It is under warranty, should I just through HP warranty repairs? Thanks in advance.

  Yes, thank you. It was under warranty with HP, so they fixed it. It seems they replaced the raw Panel and she came back that all fixed as good as new.

• HP Officejet 4630: Printing on both sides, no option to turn off when you print a Word Doc; When printing Pages

  Recently, when printing, the printer appear uses both sides of the paper, even when we don't want him. There is no option to turn it off when you print a Word document.

  
  When printing Pages it shows a checked box that says BOTH SIDES, if I uncheck, then it works.

  

  But from Word, there is no other choice. I tried the file/Preferences, I tried through the printer settings and nothing we can find will solve this problem? This has recently (last week or two) become a problem...

  Thank you!

  Hello @LaylaWi,

  Welcome to the Forums of HP Support!

  I would like to help you to solve the problem of double-sided printing that you experience when you try to print single-sided computer Mac OS X 10.9 to your HP Officejet 4630 e-all-in-one printer today. Please follow the steps below to disable duplex printing.

  1. Open a Word document
  2. Select file , and then click print
  3. Click on the drop down menu to the Copies and Pages and modify this provision
  4. Uncheck duplex .
  5. To change the additional print settings click on view details.

  -Source

  Ultimately, judging by the useful screenshots that you included in your post, you are in the right place to disable two-sided. You just need to click on the Copies & Pages for the appropriate options.

  Please reply to this message with the result of your troubleshooting. Good luck!

• You can open the same app twice for both sides of the screen on iPad pro?

  I want to open the application even for both sides of the split screen.  Is this possible?

  No, this isn't a feature of iOS.

• Want 5660: Printing on both sides of a sheet

  I love the ability to print on both sides of a sheet of paper.

  I know that if I have a document that has multiple pages in can I print every 2 pages on a single sheet.

  What I have is several files, each a page definition, but I would like to select, say, 2 files and say: "Print on both sides" and it would print the first file on the file 1 and the 2nd side on side 2.

  > >... What I have is several files, each a page definition, but I would like to select, say, 2 files and say: "Print on both sides" and it would print the first file on the file 1 and the 2nd side on side 2...

  Each file you want to print, the printer driver generates a print job that is sent to the printer.

  The printer interprets the content of the print job and prints the requested page or images, then (at the end of the work), all incomplete pages are printed and emptied of memory.

  If the next job always starts on a new sheet of paper, regardless of the setting, simplex / duplex.

  The only ways you could accomplish what you want are:

  • Find someone to write you a customized printer driver who would take the content of the two source documents offered as input to produce a single output print job; even if you could find someone to do this, it would probably cost more than the printer (or several of these printers).
  • Merge documents two sources (Word, Excel) entry in a new source document, then print it.

• Is there a way to scan both sides of the ADF on OfficeJet Pro 8600?

  I try to scan a document very large, double and want to place the document in the ADF and have both sides scanned to PDF.  Is it possible to make this work?  I am running Windows7.

  Thanks for any help,

  Stasi

  Hi Stasi,

  The artist supprted only scanning automatic duplex HP Officejet Pro 8600 Plus or Premium.

  The 8600 (N911a) Standard model does not provide these capabilities.

  Kind regards

  Shlomi

• Not printing on both sides

  After that my last windows update, my printer does not print double-sided.
  I already reinstalled the printer, which is currently installed with the name of the driver HP Officejet 7610 Series class, even though it is an Officejet 7612.

  The printer works, but it is not printing on both sides.

  What can we do?

  @HenriqueCanada

  Check this duplex is enabled:

  Control Panel > display icon > devices and printers > right click on the printer >

  Printer properties > ( generaltab: change properties) >

  the device settings tab > next to automatic duplex printing: select installed > OK

  

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  Fixed / responded? Click this post accept as Solution to help others find answers.

• 2610 print both sides with Vista

  I've recently upgraded to Vista Home 32 bit top, and have the latest version of the software/driver installed. I noticed that I no longer get the "print both sides" option in the Properties window. Is this a Vista problem?

  BTW, I say I have the current driver, download it tags like 080.001.237.000, but the solution ID Center told 082.000.242.000 that must be more recent. The update check says: I'm updating.

  Thank you

  Last update, I found additional assistance with the cat online at HP to install 6500 drivers and how to use them both.

  Thank you

• HP Scanjet 8270 scanner on both sides when in the charger.

  
  

  Never mind. I thought about it shortly after that I posted my question. There is the two-sided forward button near the left. I just need to switch it on one side instead of both sides. It's funny how sometimes in life the solution to our problem is slightly

  Deena2012 wrote:
  

  How to stop the engine of analysis from the analysis of both sides of the document. I tried to use the settings option and not checking the option «scan both sides of the original by using the duplex document scanner» This occurs when you use the charger.