Custody of data with Switch Over

Similar Questions

• Passage of custody of data with broker fails with ORA-16570 / ORA-16665

  I'm using Data Guard 11 g on Windows Server 2012 64 Bit. Recently, I have configured the broker to manage the permutations more uncomfortable.

  Unfortunately the digital switchover does not work. Broker Setup seems fine, since I can activate t and redo apply works perfectly...

  Now, the behavior is as follows... Once I put the passage through brokers, it shows the following:

  DGMGRL > passage to the smart_stb

  Continue to pass, please wait...

  Error: ORA-16665: wait for the result of a database

  Failed.

  Unable to failover, primary database is always "smart".

  The digital switchover happens, there is no restart of the primary database well! Does not appear to be linked to a DGMGRL buggy service entrance. In fact the database will not yet descended. The principal is supending all processes while trying to do so. Broker runs into a timeout, of course, but the principal remains in a State of supending. The primary doesn't seem to be able to cominicate with side standby or vice versa. Which is strange since the restoration of log shipping and apply is workng fine as mentioned... do a manual failover. I don't know what could cause this kind of behavior... Double checked everything. Once I restart the two databases and align on the rule of law that the digital transition is complete. But Needless to say that it is not intending to use the broker...

  Primary DRC.log States the following:

  2014-09-10 746441090-02000000 MICHAEL 09:13:01.378: PASSAGE to smart_stb

  2014-09-10 746441090-02000000 MICHAEL 09:13:01.378: start execution of the task: the DIGITAL switchover

  2014-09-10 09:13:01.378 NSV1: using RFIUPI_DGCI_CDESC

  2014-09-10 09:13:01.409 NSV1: using RFIUPI_DGCI_CDESC

  2014-09-10 09:13:01.409 02001000 746441090 notifier Oracle Clusterware to the primary database of disassembly for the DIGITAL switchover

  2014-09-10 09:13:01.425 ACLS: not configured CRS, config = 2

  .

  2014 09-10 02001000 746441090 MICHAEL 09:13:01.425: display primary instances for PASSAGE of phase 1

  2014 09-10 02001000 746441090 MICHAEL 09:13:01.425: State of rfi_post_instances() for CTL_SWITCH = ORA-00000

  2014-09-10 09:13:01.425 INSV: message received for publication of inter - the instance

  2014 09-10 02001000 746441090 MICHAEL 09:13:01.425: dispersants message to STANDBY for TRANSITION phase BEGIN

  2014-09-10 09:13:01.425 req ID 1.1.746441090, CTL_SWITCH opcode, phase BEGIN, 5 flags

  2014-09-10 09:13:01.425 NSV1: using RFIUPI_DB_INST_CDESC

  2014 09-10 02001000 746441090 MICHAEL 09:13:01.425: entered rfmsoexinst() for phase BEGIN

  2014-09-10 09:13:01.425 INSV: response for message with

  2014-09-10 09:13:01.425 req ID 1.1.746441090, CTL_SWITCH opcode, phase BEGIN

  2014 09-10 02001000 746441090 MICHAEL 09:13:01.425: primary instances display for transition to THE phase 2

  2014 09-10 02001000 746441090 MICHAEL 09:13:01.440: State of rfi_post_instances() for CTL_SWITCH = ORA-00000

  2014-09-10 09:13:01.440 INSV: message received for publication of inter - the instance

  2014 09-10 02001000 746441090 MICHAEL 09:13:01.440: dispersants message to STANDBY for transition to THE phase of DISMANTLING

  2014-09-10 09:13:01.440 req ID 1.1.746441090, opcode CTL_SWITCH, disassembling, 5 flags

  2014 09-10 02001000 746441090 MICHAEL 09:13:01.440: entered rfmsoexinst() for disassembling

  2014-09-10 09:13:01.440 RSM0: received the State value ask: rid = 0 x 01041001, sid = 0, phid = 1, econd = 2, sitehndl = 0 x 02001000

  2014-09-10 09:13:01.440 Log transport resources: SetState OFFLINE, DISASSEMBLY phase, external Cond SWITCH-OVER-PHYS_STBY

  2014-09-10 09:13:01.440 RSM0: received the State value ask: rid = 0 x 01011001, sid = 4, phid = 1, econd = 2, sitehndl = 0 x 02001000

  2014-09-10 09:13:01.440 of database Resource [IAM = PRIMARY]: 0 x 02001000 SetState PHYSICAL-APPLY-ON, DISASSEMBLY phase, external Cond SWITCH-OVER-PHYS_STBY, handful of Site target

  2014-09-10 09:13:01.440 RSM0: execution of SQL [ALTER DATABASE COMMIT to SWITCH STANDBY mode PHYSICS WITH the STOP of the SESSION]

  2014-09-10 09:13:06.630 SQL [ALTER DATABASE COMMETTRE at PHYSICS CROSSING SHALL WITH SESSION SHUTDOWN] executed successfully

  2014-09-10 09:13:06.630 RSM: compensation IncarnationTable internal property of the site 0 x 01010000

  2014 09-10 02001000 746441090 MICHAEL 09:13:06.630: Broker determines this restart of the instance is necessary: operation = status = ORA-16570

  2014 09-10 02001000 746441090 09:13:06.630 resources: smart (01011001) State: PHYSICAL-APPLY-ON

  2014-09-10 09:13:06.630 INSV: response for message with

  2014-09-10 09:13:06.630 req ID 1.1.746441090, CTL_SWITCH, disassembling opcode

  2014 09-10 02001000 746441090 MICHAEL 09:13:06.630: Instance 'smart' (ID 1) returned ORA-16570

  2014-09-10 09:13:06.630 02001000 746441090 for disassembling of the CTL_SWITCH operation

  2014-09-10 09:13:06.646 NSV1: using RFIUPI_DGCI_CDESC

  2014 09-10 02001000 746441090 MICHAEL 09:13:06.646: primary instances display for transition to THE phase 2

  2014-09-10 09:13:06.646 INSV: message received for publication of inter - the instance

  2014 09-10 02001000 746441090 MICHAEL 09:13:06.646: State of rfi_post_instances() for CTL_SWITCH = ORA-00000

  2014-09-10 09:13:06.646 req ID 1.1.746441090, opcode CTL_SWITCH, disassembling, 5 flags

  2014 09-10 02001000 746441090 MICHAEL 09:13:06.646: dispersants message to STANDBY for transition to THE phase of DISMANTLING

  2014 09-10 02001000 746441090 MICHAEL 09:13:06.646: entered rfmsoexinst() for disassembling

  2014-09-10 09:13:06.646 NSV1: using RFIUPI_DB_INST_CDESC

  2014-09-10 09:13:06.646 INSV: response for message with

  2014-09-10 09:13:06.646 req ID 1.1.746441090, CTL_SWITCH, disassembling opcode

  2014 09-10 02001000 746441090 MICHAEL 09:13:06.646: Instance 'smart' (ID 1) returned ORA-16570

  2014-09-10 09:13:06.646 02001000 746441090 for disassembling of the CTL_SWITCH operation

  2014-09-10 09:13:28.619 NSV1: using RFIUPI_DB_INST_CDESC

  2014-09-10 09:13:28.619 NSV1: smart_stb returned ORA-16665 Site.

  2014-09-10 09:13:43.620 NSV1: using RFIUPI_DB_INST_CDESC

  2014-09-10 09:13:43.620 NSV1: smart_stb returned ORA-16665 Site.

  2014-09-10 09:13:58.639 NSV1: using RFIUPI_DB_INST_CDESC

  2014-09-10 09:13:58.639 NSV1: smart_stb returned ORA-16665 Site.

  2014-09-10 09:14:13.657 NSV1: using RFIUPI_DB_INST_CDESC

  2014-09-10 09:14:13.657 NSV1: smart_stb returned ORA-16665 Site.

  2014-09-10 09:14:28.674 NSV1: using RFIUPI_DB_INST_CDESC

  2014-09-10 09:14:28.674 NSV1: smart_stb returned ORA-16665 Site.

  2014-09-10 09:14:43.676 NSV1: using RFIUPI_DB_INST_CDESC

  2014-09-10 09:14:43.676 NSV1: smart_stb returned ORA-16665 Site.

  2014-09-10 09:14:58.693 NSV1: using RFIUPI_DB_INST_CDESC

  2014-09-10 09:14:58.693 NSV1: smart_stb returned ORA-16665 Site.

  2014-09-10 09:15:13.695 NSV1: using RFIUPI_DB_INST_CDESC

  2014-09-10 09:15:13.695 NSV1: smart_stb returned ORA-16665 Site.

  2014-09-10 09:15:28.707 NSV1: using RFIUPI_DB_INST_CDESC

  2014-09-10 09:15:28.707 NSV1: smart_stb returned ORA-16665 Site.

  2014-09-10 09:15:43.724 NSV1: using RFIUPI_DB_INST_CDESC

  2014-09-10 09:15:43.724 NSV1: smart_stb returned ORA-16665 Site.

  2014-09-10 09:15:58.726 NSV1: using RFIUPI_DB_INST_CDESC

  2014-09-10 09:15:58.726 NSV1: smart_stb returned ORA-16665 Site.

  2014-09-10 09:16:13.727 NSV1: using RFIUPI_DB_INST_CDESC

  2014-09-10 09:16:13.727 NSV1: smart_stb returned ORA-16665 Site.

  2014 09-10 02001000 746441090 MICHAEL 09:16:28.729: database smart_stb returned ORA-16665

  2014-09-10 09:16:28.729 02001000 746441090 opcode = CTL_SWITCH, phase = DISASSEMBLY, req_id = 1.1.746441090

  2014-09-10 09:16:28.729 02001000 746441090 CTL_SWITCH operation cancelled during phase 2, error = ORA-16665

  2014 09-10 02001000 746441090 MICHAEL 09:16:28.729: ORA-16665 stateful failover operation failed

  2014-09-10 09:16:28.729 NSV1: using RFIUPI_DGCI_CDESC

  2014 09-10 02001000 746441090 MICHAEL 09:16:28.744: display primary instances for PASSAGE of phase 5

  2014-09-10 09:16:28.744 INSV: message received for publication of inter - the instance

  2014 09-10 02001000 746441090 MICHAEL 09:16:28.744: State of rfi_post_instances() for CTL_SWITCH = ORA-00000

  2014-09-10 09:16:28.744 req ID 1.1.746441090, CTL_SWITCH opcode, phase END, 5 flags

  2014 09-10 02001000 746441090 MICHAEL 09:16:28.744: passage to the aborted due to errors

  2014 09-10 02001000 746441090 named Site 09:16:28.744: smart is always primary school

  2014 09-10 02001000 746441090 error 09:16:28.744 = ORA-16665

  DRC.log Eve shows the following:

  2014-09-10 09:13:01.352 02001000 746441090 notify Oracle Clusterware base ensures target disassembly of passing data to the

  2014-09-10 09:13:01.367 ACLS: not configured CRS, config = 2

  .

  2014 09-10 02001000 746441090 MICHAEL 09:13:01.367: display of bodies sleep for transition to THE phase 1

  2014-09-10 09:13:01.367 INSV: message received for publication of inter - the instance

  2014-09-10 09:13:01.367 req ID 1.1.746441090, CTL_SWITCH opcode, phase BEGIN, 5 flags

  2014 09-10 02001000 746441090 MICHAEL 09:13:01.367: entered rfmsoexinst() for phase BEGIN

  2014-09-10 09:13:01.367 INSV: response for message with

  2014-09-10 09:13:01.367 req ID 1.1.746441090, CTL_SWITCH opcode, phase BEGIN

  2014 09-10 02001000 746441090 MICHAEL 09:13:01.367: entered rfm_release_chief_lock() for CTL_SWITCH

  2014 09-10 02001000 746441090 MICHAEL 09:13:06.571: entered rfm_get_chief_lock() for CTL_SWITCH, reason 0

  2014 09-10 02001000 746441090 MICHAEL 09:13:06.571: start execution of the task: the DIGITAL switchover

  2014 09-10 02001000 746441090 MICHAEL 09:13:06.586: display of bodies sleep for transition to THE phase 2

  2014-09-10 09:13:06.586 INSV: message received for publication of inter - the instance

  2014-09-10 09:13:06.586 req ID 1.1.746441090, opcode CTL_SWITCH, disassembling, 5 flags

  2014 09-10 02001000 746441090 MICHAEL 09:13:06.586: entered rfmsoexinst() for disassembling

  2014-09-10 09:13:06.586 RSM0: received the State value ask: rid = 0 x 02031001, sid = 0, phid = 1, econd = 2, sitehndl = 0 x 02001000

  2014-09-10 09:13:06.586 redo apply the resource: SetState OFFLINE, DISASSEMBLY phase, external Cond SWITCH-OVER-PHYS_STBY

  2014-09-10 09:13:06.586 RSM0: received the State value ask: rid = 0 x 02012001, sid = 9, phid = 1, econd = 2, sitehndl = 0 x 02001000

  2014-09-10 09:13:06.586 of database Resource [IAM = PHYSICS]: handle target SetState-READ-WRITE-XPTON Site, DISMANTLING phase, external SWITCH-OVER-PHYS_STBY, 0 x 02001000 Cond

  2014-09-10 09:13:06.586 RSM0: execution of SQL [ALTER DATABASE RECOVER MANAGED STANDBY DATABASE CANCEL]

  2014-09-10 09:13:07.602 SQL [ALTER DATABASE RECOVER MANAGED STANDBY DATABASE CANCEL] executed successfully

  2014-09-10 09:13:07.711 RSM0: execution of SQL [ALTER DATABASE RECOVER MANAGED STANDBY DATABASE through FINAL passage to THE NODELAY]

  2014-09-10 09:13:09.509 SQL [ALTER DATABASE RECOVER MANAGED STANDBY DATABASE BY LAST crossing THE NODELAY] executed successfully

  2014-09-10 09:13:09.509 RSM0: execution of SQL [ALTER DATABASE COMMIT to SWITCHING to the MAIN WAITING WITH the STOP of the SESSION]

  2014-09-10 09:13:11.345 SQL [ALTER DATABASE COMMETTRE to TRANSITION to PRIMARY WAIT WITH SESSION SHUTDOWN] executed successfully

  2014-09-10 09:13:11.345 of database Resource successful SetState

  2014-09-10 09:13:11.345 INSV: response for message with

  2014-09-10 09:13:11.345 req ID 1.1.746441090, CTL_SWITCH, disassembling opcode

  2014 09-10 02001000 746441090 MICHAEL 09:13:11.345: entered rfm_release_chief_lock() for CTL_SWITCH

  2014-09-10 09:13:28.555 drcx: found the task req_id = 1.1.746441090, PROBE, but the phase is carried out

  2014-09-10 09:13:43.555 drcx: found the task req_id = 1.1.746441090, PROBE, but the phase is carried out

  2014-09-10 09:13:58.571 drcx: found the task req_id = 1.1.746441090, PROBE, but the phase is carried out

  2014-09-10 09:14:13.590 drcx: found the task req_id = 1.1.746441090, PROBE, but the phase is carried out

  2014-09-10 09:14:28.605 drcx: found the task req_id = 1.1.746441090, PROBE, but the phase is carried out

  2014-09-10 09:14:43.606 drcx: found the task req_id = 1.1.746441090, PROBE, but the phase is carried out

  2014-09-10 09:14:58.622 drcx: found the task req_id = 1.1.746441090, PROBE, but the phase is carried out

  2014-09-10 09:15:13.625 drcx: found the task req_id = 1.1.746441090, PROBE, but the phase is carried out

  2014-09-10 09:15:28.641 drcx: found the task req_id = 1.1.746441090, PROBE, but the phase is carried out

  2014-09-10 09:15:43.646 drcx: found the task req_id = 1.1.746441090, PROBE, but the phase is carried out

  2014-09-10 09:15:58.652 drcx: found the task req_id = 1.1.746441090, PROBE, but the phase is carried out

  2014-09-10 09:16:13.653 drcx: found the task req_id = 1.1.746441090, PROBE, but the phase is carried out

  2014 09-10 02001000 746441090 MICHAEL 09:16:27.606: Data Guard Broker ending NSV0, timed out waiting for a response from the smart database

  2014 09-10 02001000 746441090 MICHAEL 09:16:27.825: smart database returned ORA-16662

  2014-09-10 09:16:27.825 02001000 746441090 opcode = CTL_SWITCH, phase = RESYNCHRONIZATION, req_id = 1.1.746441090

  2014 09-10 02001000 746441090 MICHAEL 09:16:42.840: Data Guard Broker ending NSV0, timed out waiting for a response from the smart database

  2014 09-10 02001000 746441090 MICHAEL 09:16:42.840: smart database returned ORA-16662

  2014-09-10 09:16:42.840 02001000 746441090 opcode = CTL_SWITCH, phase = RESYNCHRONIZATION, req_id = 1.1.746441090

  2014 09-10 02001000 746441090 MICHAEL 09:16:57.861: Data Guard Broker ending NSV0, timed out waiting for a response from the smart database

  2014 09-10 02001000 746441090 MICHAEL 09:16:57.861: smart database returned ORA-16662

  2014-09-10 09:16:57.861 02001000 746441090 opcode = CTL_SWITCH, phase = RESYNCHRONIZATION, req_id = 1.1.746441090

  2014-09-10 09:16:58.705 746441091 00001000 MICHAEL: entered rfm_get_chief_lock() for HEALTH_CHECK, reason 0

  2014-09-10 09:16:58.705 746441091 00001000 MICHAEL: task to free the 1.1.746441090 orphans, opcode = CTL_SWITCH.

  2014-09-10 09:16:58.705 746441091 00001000 MICHAEL: start the task execution: automated healthcheck

  2014-09-10 09:16:58.720 746441091 00001000 MICHAEL: start-up of the health check

  2014-09-10 09:16:58.720 INSV: message received for publication of inter - the instance

  2014-09-10 09:16:58.720 746441091 00001000 MICHAEL: rfi_post_instances() status = ORA-00000

  2014-09-10 09:16:58.720 req ID 1.1.746441091, HEALTH_CHECK opcode, phase BEGIN, 5 flags

  2014 09-10 00000000 746441091 MICHAEL 09:16:58.720: entered rfmhcexinst

  2014 09-10 00000000 746441091 MICHAEL 09:16:58.720: rfmhcexinst call transfer

  2014-09-10 09:16:58.720 RSM0: receipt get status request: rid = 0 x 02012001, sid = 4

  2014-09-10 09:16:58.720 RSM0: HEALTH CHECK ERROR: ORA-16816: incorrect database role

  2014-09-10 09:16:58.720 WARNING: given RCS 281474976710655 with resetlogs_id = 851952614 is less than resetlogs_change # 744657 of the incarnation.

  2014-09-10 09:16:58.736 current IncarnationTable value is:

  2014-09-10 09:16:58.736 2,744657,851952614,1, * 851351631, 1, 1, 0, #.

  2014-09-10 09:16:58.736 RSM0: HEALTH CHECK ERROR: ORA-16700: the standby database has diverged from the primary database

  2014-09-10 09:16:58.970 00000000 746441091 HEALTH_CHECK operation cancelled during phase 1, error = ORA-16810

  2014-09-10 09:16:58.970 RSM0: receipt get status request: rid = 0 x 02031001, sid = 1

  2014-09-10 09:16:58.970 00000000 746441091 MICHAEL: standby Instance completed the health check

  2014-09-10 09:16:58.970 INSV: response for message with

  2014-09-10 09:16:58.970 req ID 1.1.746441091, HEALTH_CHECK opcode, phase BEGIN

  2014-09-10 09:16:58.970 MICHAEL: HEALTH CHECK ERROR: ORA-16766: redo apply is stopped

  2014-09-10 09:16:58.970 MICHAEL: aggregation based on H/C, db 0 x 02001000 has gravity = 16501, status = 16810

  2014-09-10 09:16:58.970 00000000 746441091 HEALTH_CHECK operation cancelled during phase 1, error = ORA-16810

  2014-09-10 09:16:58.970 INSV: message received for publication of inter - the instance

  2014-09-10 09:16:58.970 req ID 1.1.746441091, HEALTH_CHECK opcode, phase BEGIN, flags 20005

  2014-09-10 09:16:58.970 MICHAEL: aggregation based on H/C, db 0 x 02001000 has gravity = 16501, status = 16810

  2014-09-10 09:16:58.970 INSV: response for message with

  2014-09-10 09:16:58.970 req ID 1.1.746441091, HEALTH_CHECK opcode, phase BEGIN

  2014 09-10 00000000 746441091 MICHAEL 09:17:02.017: entered rfm_release_chief_lock() for HEALTH_CHECK

  2014-09-10 09:17:13.724 drcx: task req_id is not found = 1.1.746441091 for PROBE.

  2014-09-10 09:17:28.730 drcx: task req_id is not found = 1.1.746441091 for PROBE.

  Primary alert.log indicates the following:

  LNS: Standby redo log file selected for thread 1 sequence 12046 for destination LOG_ARCHIVE_DEST_2

  My Nov 10 09:13:01, 2014

  ALTER DATABASE COMMIT TO SWITCH STANDBY MODE PHYSICS WITH THE STOP OF THE SESSION

  My Nov 10 09:13:01, 2014

  Thread 1 Advanced to record the sequence 12047 (switch LGWR)

  Currently Journal # 2 seq # 12047 mem # 0: X:\SMART\LOG1\SMART_21.LOG

  Currently Journal # 2 seq # 12047 mem # 1: Y:\SMART\LOG2\SMART_22.LOG

  Stop background QMNC process

  My Nov 10 09:13:01, 2014

  Arc1: Evaluating archive log 1 thread 1 sequence 12046

  CLOSING: kill the server sessions.

  Program 'SYSTEM' of active processes 15708 user ' ORACLE. EXE (W000)"

  Program 'SYSTEM' of active processes 15708 user ' ORACLE. EXE (W000)"

  Program 'SYSTEM' of active processes 13372 user ' ORACLE. EXE (W001)"

  Program 'SYSTEM' of active processes 13372 user ' ORACLE. EXE (W001)"

  Program 'SYSTEM' of active processes 15708 user ' ORACLE. EXE (W000)"

  Program 'SYSTEM' of active processes 15708 user ' ORACLE. EXE (W000)"

  Program 'SYSTEM' of active processes 13372 user ' ORACLE. EXE (W001)"

  Program 'SYSTEM' of active processes 13372 user ' ORACLE. EXE (W001)"

  Program 'SYSTEM' of active processes 15708 user ' ORACLE. EXE (W000)"

  Program 'SYSTEM' of active processes 15708 user ' ORACLE. EXE (W000)"

  Program 'SYSTEM' of active processes 13372 user ' ORACLE. EXE (W001)"

  Program 'SYSTEM' of active processes 13372 user ' ORACLE. EXE (W001)"

  Program 'SYSTEM' of active processes 15708 user ' ORACLE. EXE (W000)"

  Program 'SYSTEM' of active processes 15708 user ' ORACLE. EXE (W000)"

  Program 'SYSTEM' of active processes 13372 user ' ORACLE. EXE (W001)"

  Program 'SYSTEM' of active processes 13372 user ' ORACLE. EXE (W001)"

  Program 'SYSTEM' of active processes 15708 user ' ORACLE. EXE (W000)"

  Program 'SYSTEM' of active processes 15708 user ' ORACLE. EXE (W000)"

  Program 'SYSTEM' of active processes 13372 user ' ORACLE. EXE (W001)"

  Program 'SYSTEM' of active processes 13372 user ' ORACLE. EXE (W001)"

  Program 'SYSTEM' of active processes 15708 user ' ORACLE. EXE (W000)"

  Program 'SYSTEM' of active processes 15708 user ' ORACLE. EXE (W000)"

  Program 'SYSTEM' of active processes 13372 user ' ORACLE. EXE (W001)"

  Program 'SYSTEM' of active processes 13372 user ' ORACLE. EXE (W001)"

  CLOSED: all the closing of sessions successfully.

  krss_find_arc: selection ARC2 to receive the message as a last resort

  Waiting for all non-current archive ORLs...

  Waiting for thread 1 sequence 12046 ORL to archive...

  My Nov 10 09:13:02 2014

  Arc0: Assessment of 1 thread 1 sequence 12046 log archives

  My Nov 10 09:13:02 2014

  ARC2: Evaluating archive log 1 thread 1 sequence 12046

  Arc0: Unable to archive the thread 1 sequence 12046

  Newspapers archived by another process

  ARC2: Impossible to archive the thread 1 sequence 12046

  Newspapers archived by another process

  Involved the creation of the archivelog 'W:\SMART\ARC\SMART_12046_1_851952614.ARC '.

  Archived journal 19372 extra for each sequence 1 12046 0xab72f94c dest ID thread entry 1:

  ENT for thread 1 12046 sequence have been archived...

  All non-current ORLs have been archived.

  Waiting for all FAL entries to archive...

  All FAL entries were archived.

  Waiting for dest_id 2 can be synchronized...

  OCISessionBegin with PasswordVerifier succeeded

  Client pid [12320] annexed to the RFS pid [3648] number of the remote instance [1] to dest "smart_dg_stb."

  Physical passage target Active, synchronized sleep has been identified

  Transition to the end-of-Redo Log thread 1 sequence 12047 has been fixed

  The digital switchover: primary YVERT seen above the value 0x0.0x22345d2

  ARCH: Noswitch of archiving the thread 1, sequence 12047

  ARCH: End-of-Redo archive thread 1 sequence 12047 branch

  ARCH: Evaluating archive log 2 thread 1 sequence 12047

  ARCH: LGWR is actively archiving destination LOG_ARCHIVE_DEST_2

  ARCH: Transmitting the activation 0xab72f94c ID

  OCISessionBegin with PasswordVerifier succeeded

  Client pid [12244] annexed to the RFS pid [9972] number of the remote instance [1] to dest "smart_dg_stb."

  ARCH: Standby redo log file selected for thread 1 sequence 12047 for destination LOG_ARCHIVE_DEST_2

  Involved the creation of the archivelog 'W:\SMART\ARC\SMART_12047_1_851952614.ARC '.

  Archived journal 19373 extra for each sequence 1 12047 0xab72f94c dest ID thread entry 1:

  Archived journal 19374 extra for each sequence 1 12047 0xab72f94c dest ID thread entry 2:

  ARCH: Archiving is disabled due to the current archive log file

  Primary will check some generator of target of receiving of alls again

  Final inspection for a target standby synchronized. Verification will be made once.

  ARCH: Transmitting the activation 0xab72f94c ID

  LOG_ARCHIVE_DEST_2 is a potential target of the transition to physical standby

  Active, synchronized target has been identified

  Target has received also redo all the

  -----------------------------------------------------------

  |          Target the waking state.

  | LOG_ARCHIVE_DEST_1: NO ACTIVE |

  | LOG_ARCHIVE_DEST_2: RECEIVED ALL DATA.

  | LOG_ARCHIVE_DEST_3: NO ACTIVE |

  | LOG_ARCHIVE_DEST_4: NO ACTIVE |

  | LOG_ARCHIVE_DEST_5: NO ACTIVE |

  | LOG_ARCHIVE_DEST_6: NO ACTIVE |

  | LOG_ARCHIVE_DEST_7: NO ACTIVE |

  | LOG_ARCHIVE_DEST_8: NO ACTIVE |

  | LOG_ARCHIVE_DEST_9: NO ACTIVE |

  | LOG_ARCHIVE_DEST_10: NO ACTIVE |

  | LOG_ARCHIVE_DEST_11: NO ACTIVE |

  | LOG_ARCHIVE_DEST_12: NO ACTIVE |

  | LOG_ARCHIVE_DEST_13: NO ACTIVE |

  | LOG_ARCHIVE_DEST_14: NO ACTIVE |

  | LOG_ARCHIVE_DEST_15: NO ACTIVE |

  | LOG_ARCHIVE_DEST_16: NO ACTIVE |

  | LOG_ARCHIVE_DEST_17: NO ACTIVE |

  | LOG_ARCHIVE_DEST_18: NO ACTIVE |

  | LOG_ARCHIVE_DEST_19: NO ACTIVE |

  | LOG_ARCHIVE_DEST_20: NO ACTIVE |

  | LOG_ARCHIVE_DEST_21: NO ACTIVE |

  | LOG_ARCHIVE_DEST_22: NO ACTIVE |

  | LOG_ARCHIVE_DEST_23: NO ACTIVE |

  | LOG_ARCHIVE_DEST_24: NO ACTIVE |

  | LOG_ARCHIVE_DEST_25: NO ACTIVE |

  | LOG_ARCHIVE_DEST_26: NO ACTIVE |

  | LOG_ARCHIVE_DEST_27: NO ACTIVE |

  | LOG_ARCHIVE_DEST_28: NO ACTIVE |

  | LOG_ARCHIVE_DEST_29: NO ACTIVE |

  | LOG_ARCHIVE_DEST_30: NO ACTIVE |

  | LOG_ARCHIVE_DEST_31: NO ACTIVE |

  ------------------------------------------------------------

  Backup controlfile written to find the D:\ORACLE\ORA_DBA\SMART\TRACE\diag\rdbms\smart\smart\trace\smart_rsm0_12244.trc file

  Compensation pending activation ID 2876438860 (0xab72f94c)

  The primary database controlfile is created using the

  Clause 'MAXLOGFILES 255'.

  There is space for the log files waiting for redo up to 251

  Use the following SQL commands on the standby database to create

  waiting for redo logfiles that correspond to the primary database:

  ALTER DATABASE add STANDBY LOGFILE 'srl1.f' SIZE 52428800.

  ALTER DATABASE add STANDBY LOGFILE 'srl2.f' SIZE 52428800.

  ALTER DATABASE add STANDBY LOGFILE 'srl3.f' SIZE 52428800.

  ALTER DATABASE add STANDBY LOGFILE 'srl4.f' SIZE 52428800.

  ALTER DATABASE add STANDBY LOGFILE 'srl5.f' SIZE 52428800.

  ARCHIVELOG for thread 1 sequence 12047 required for recovery of the eve

  The digital switchover: converted primary Controlfile controlfile standby successfully.

  The digital switchover: Complete - closing of the database required

  Completed: ALTER DATABASE COMMIT to SWITCH STANDBY mode PHYSICS WITH the STOP of the SESSION

  My Nov 10 09:13:20 2014

  (Ospid 12320) process is suspended due to the transition to a physical relief operation.

  My Nov 10 09:16:58 2014

  (Ospid 12244) process is suspended due to the transition to a physical relief operation.

  My Nov 10 09:17:08 2014

  Process (ospid 3080) is suspended due to the transition to a physical relief operation.

  My Nov 10 09:17:09 2014

  Process (ospid 12636) is suspended due to the transition to a physical relief operation.

  My Nov 10 09:17:10 2014

  Process (ospid 5292) is suspended due to the transition to a physical relief operation.

  My Nov 10 09:17:43 2014

  RSM0, PID = 12244 process, will be killed

  My Nov 10 09:17:44 2014

  RSM0 started with pid = 27, OS id = 16280

  My Nov 10 09:20:56 2014

  minact-RCS: received the error during the scan e:12751 usn:6 useg

  minact-SNA: useg scan slip on with error e:12751

  My Oct 10 09:21:19 2014

  Process (ospid 16280) is suspended due to the transition to a physical relief operation.

  My Nov 10 09:22:04 2014

  RSM0, PID = 16280 process, will be killed

  My Nov 10 09:22:05 2014

  RSM0 started with pid = 27, OS id = 10528

  My Nov 10 09:25:39 2014

  (Ospid 10528) process is suspended due to the transition to a physical relief operation.

  My Nov 10 09:26:03 2014

  minact-RCS: received the error during the scan e:12751 usn:6 useg

  minact-SNA: useg scan slip on with error e:12751

  My Nov 10 09:26:24 2014

  RSM0, PID = 10528 process, will be killed

  My Nov 10 09:26:25 2014

  RSM0 started with pid = 27, OS id = 15752

  My Nov 10 09:29:59 2014

  Process (ospid 15752) is suspended due to the transition to a physical relief operation.

  My Nov 10 09:30:44 2014

  RSM0, PID = 15752 process, will be killed

  My Nov 10 09:30:45 2014

  RSM0 started with pid = 27, OS id = 1972

  My Nov 10 09:31:09 2014

  minact-RCS: received the error during the scan e:12751 usn:6 useg

  minact-SNA: useg scan slip on with error e:12751

  Suspend action 'Block Cleanout Optim, Undo Segment Scan' MMON 82800 seconds

  My Nov 10 09:34:19 2014

  Process (ospid, 1972) is suspended due to the transition to a physical relief operation.

  alert-journal sleep shows the following:

  My Nov 10 09:13:01, 2014

  ARC3: Evaluating archive log 5 thread 1 sequence 12046

  Involved the creation of the archivelog 'W:\SMART\ARC\SMART_12046_1_851952614.ARC '.

  Archived journal 5932 extra for each sequence 1 12046 0xab72f94c dest ID thread entry 1:

  My Nov 10 09:13:01, 2014

  Media, recovery waiting for thread 1 sequence 12047

  My Nov 10 09:13:04 2014

  Again shipping customer logged in as PUBLIC

  -User is valid

  RFS [6]: assigned to the process 3648 RFS

  RFS [6]: identified the type of database such as 'physical' standby: customer is ARCH pid 12320

  My Nov 10 09:13:06 2014

  Again shipping customer logged in as PUBLIC

  -User is valid

  RFS [7]: assigned to the process 9972 RFS

  RFS [7]: identified the type of database such as 'physical' standby: Client is in the foreground pid 12244

  RFS [7]: end-of-Redo for thread archiving 1 sequence 12047

  RFS [7]: Eve successfully opened journal 5: "Y:\SMART\LOG2\SMART_S_5.LOG."

  RFS [7]: Journal selected 5 for thread 1 sequence 12047 dbid-1425016497 branch of the 851952614

  My Nov 10 09:13:06 2014

  Arc1: Evaluating archive log 5 thread 1 sequence 12047

  Involved the creation of the archivelog 'W:\SMART\ARC\SMART_12047_1_851952614.ARC '.

  Archived journal 5933 extra for each sequence 1 12047 0xab72f94c dest ID thread entry 1:

  My Nov 10 09:13:06 2014

  ALTER DATABASE RECOVER MANAGED STANDBY DATABASE CANCEL

  MRP0: Background Media Recovery cancelled with status 16037

  Errors in the D:\ORACLE\ORA_DBA\SMART\TRACE\diag\rdbms\smart_stb\smart\trace\smart_pr00_13804.trc file:

  ORA-16037: user has requested the cancellation of the managed recovery

  Managed Standby recovery not using real time applies

  Recovery interrupted!

  Errors in the D:\ORACLE\ORA_DBA\SMART\TRACE\diag\rdbms\smart_stb\smart\trace\smart_pr00_13804.trc file:

  ORA-16037: user has requested the cancellation of the managed recovery

  My Nov 10 09:13:07 2014

  Errors in the D:\ORACLE\ORA_DBA\SMART\TRACE\diag\rdbms\smart_stb\smart\trace\smart_mrp0_11168.trc file:

  ORA-10877: error reported in parallel recovery slave

  Completed: ALTER DATABASE RECOVER MANAGED STANDBY DATABASE CANCEL

  Data not available for the digital switchover

  End-of-REDO the archived log file was not found

  Incomplete recovery SCN:0:35846057 archive SCN:0:35866066

  ALTER DATABASE RECOVER MANAGED STANDBY DATABASE THROUGH FINAL PASSAGE TO THE NODELAY

  has started the process of logmerger

  My Nov 10 09:13:07 2014

  Managed Standby recovery not using real time applies

  Parallel Media Recovery started with 8 slaves

  Media W:\SMART\ARC\SMART_12047_1_851952614.ARC recovery log

  Identified the SNA 0x0.22345d2 end-of-Redo (failover) for thread 1 sequence 12047

  Activation reset sleep ID 2876438860 (0xab72f94c)

  Met Media Recovery end Redo indicator

  Media recovery applied through change 35866066

  Attempt to limbo arscn 0:35866066 irscn 0:35866066

  Completed: ALTER DATABASE RECOVER MANAGED STANDBY database through FINAL passage to THE NODELAY

  ALTER DATABASE COMMIT TO SWITCHING TO THE MAIN WAITING WITH THE STOP OF THE SESSION

  Waiting for the transition from role maximum is 15 minutes.

  krsv_proc_kill: kill 2 process (all the RFS)

  Backup controlfile written to find the D:\ORACLE\ORA_DBA\SMART\TRACE\diag\rdbms\smart_stb\smart\trace\smart_rsm0_14652.trc file

  Passage to the after complete recovery through change 35866066

  X:\SMART\LOG1\SMART_11.LOG online journal: thread 1 Group 1 had been previously authorized

  Y:\SMART\LOG2\SMART_12.LOG online journal: thread 1 Group 1 had been previously authorized

  X:\SMART\LOG1\SMART_21.LOG online journal: thread 1 group 2 was previously disabled

  Y:\SMART\LOG2\SMART_22.LOG online journal: thread 1 group 2 was previously disabled

  X:\SMART\LOG1\SMART_31.LOG online journal: thread 1 Group 3 has been previously authorized

  Y:\SMART\LOG2\SMART_32.LOG online journal: thread 1 Group 3 has been previously authorized

  X:\SMART\LOG1\SMART_41.LOG online journal: thread 1 Group 4 has been previously authorized

  Y:\SMART\LOG2\SMART_42.LOG online journal: thread 1 Group 4 has been previously authorized

  Standby became primary YVERT: 35866064

  The digital switchover: completed - mounted as primary database

  Completed: ALTER DATABASE COMMIT to SWITCHING to the MAIN WAITING WITH the STOP of the SESSION

  My Nov 10 09:13:45 2014

  Arc0: become the "no SRL" ARCH

  My Nov 10 09:13:46 2014

  ARC3: become the "no SRL" ARCH

  My Nov 10 09:13:46 2014

  Arc1: become the "no SRL" ARCH

  My Nov 10 09:16:58 2014

  NSV0 started with pid = 26, OS id = 15900

  My Oct 10 09:21:20 2014

  MICHAEL: NSV0 network call timeout. Kill it now.

  The Setup is as follows:

  DGMGRL > see the configuration;

  Configuration - dg_smart

  Protection mode: MaxPerformance

  Databases:

  Smart - primary database

  smart_stb - physical of the standby database

  Fast-Start Failover: DISABLED

  The configuration status:

  SUCCESS

  DGMGRL > see the detailed chip database

  -Smart database

  Role: PRIMARY

  State of destination: TRANSPORT-WE

  Occurrence (s):

  Smart

  Properties:

  DGConnectIdentifier = "smart_dg_prim".

  ObserverConnectIdentifier = "

  LogXptMode = "ASYNC".

  DelayMins = '0'

  Binding = "optional."

  MaxFailure = '0'

  MaxConnections = '1'

  ReopenSecs = "300"

  NetTimeout = "30"

  RedoCompression = "DISABLE."

  LogShipping = 'ON '.

  PreferredApplyInstance = "

  ApplyInstanceTimeout = '0'

  ApplyParallel = 'AUTO '.

  StandbyFileManagement = 'AUTO '.

  ArchiveLagTarget = "300"

  LogArchiveMaxProcesses = "4"

  LogArchiveMinSucceedDest = '1'

  DbFileNameConvert = "

  LogFileNameConvert = "X:\SMART\LOG1, X:\SMART\LOG1, Y:\SMART\LOG2, Y:\SMART\LOG2.

  FastStartFailoverTarget = "

  InconsistentProperties = "(monitor).

  InconsistentLogXptProps = "(monitor).

  SendQEntries = "(monitor).

  LogXptStatus = "(monitor).

  RecvQEntries = "(monitor).

  Nom_sid = "smart."

  StaticConnectIdentifier = ' (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=host02) (PORT = 1599)) (CONNECT_DATA = (SERVICE_NAME = smart_DGMGRL)(INSTANCE_NAME=smart) (SERVER = DEDICATED)))'

  StandbyArchiveLocation = "W:\SMART\arc\".

  AlternateLocation = "

  LogArchiveTrace = '8191'

  LogArchiveFormat = "smart_%s_%t_%r.arc".

  TopWaitEvents = "(monitor).

  State of the database:

  SUCCESS

  DGMGRL > see the detailed database smart_stb

  Database - smart_stb

  Role: STANDBY PHYSICS

  State of destination: apply

  Transport Lag: 0 seconds

  Apply the Lag: 0 seconds

  Real-time query: OFF

  Occurrence (s):

  Smart

  Properties:

  DGConnectIdentifier = "smart_dg_stb".

  ObserverConnectIdentifier = "

  LogXptMode = "ASYNC".

  DelayMins = '0'

  Binding = "optional."

  MaxFailure = '0'

  MaxConnections = '1'

  ReopenSecs = "300"

  NetTimeout = "30"

  RedoCompression = "DISABLE."

  LogShipping = 'ON '.

  PreferredApplyInstance = "

  ApplyInstanceTimeout = '0'

  ApplyParallel = 'AUTO '.

  StandbyFileManagement = 'AUTO '.

  ArchiveLagTarget = "300"

  LogArchiveMaxProcesses = "4"

  LogArchiveMinSucceedDest = '1'

  DbFileNameConvert = "

  LogFileNameConvert = "X:\SMART\LOG1, X:\SMART\LOG1, Y:\SMART\LOG2, Y:\SMART\LOG2.

  FastStartFailoverTarget = "

  InconsistentProperties = "(monitor).

  InconsistentLogXptProps = "(monitor).

  SendQEntries = "(monitor).

  LogXptStatus = "(monitor).

  RecvQEntries = "(monitor).

  Nom_sid = "smart."

  StaticConnectIdentifier = ' (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=host01) (PORT = 1599)) (CONNECT_DATA = (SERVICE_NAME = smart_stb_DGMGRL)(INSTANCE_NAME=smart) (SERVER = DEDICATED)))'

  StandbyArchiveLocation = "W:\SMART\arc\".

  AlternateLocation = "

  LogArchiveTrace = '8191'

  LogArchiveFormat = "smart_%s_%t_%r.arc".

  TopWaitEvents = "(monitor).

  State of the database:

  SUCCESS

  tnsnames.ora:

  smart_dg_stb = (Description = (Address = (Protocol = TCP)(Host=host01) (port = 1599)) (CONNECT_DATA = (Server = Dedicated) (SID = Smart)))

  smart_dg_prim = (Description = (Address = (Protocol = TCP)(Host=host02) (port = 1599)) (CONNECT_DATA = (Server = Dedicated) (SID = Smart)))

  Primary listner.ora:

  LISTENER_REDO_SMART =

  (DESCRIPTION_LIST =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP (PORT = 1599))(HOST = host02))

  )

  )

  SID_LIST_LISTENER_REDO_SMART =

  (SID_LIST =

  (SID_DESC =

  (SID_NAME = CLRExtProc)

  (ORACLE_HOME = D:\oracle\11.2.0)

  (= Extproc PROGRAM)

  (ENVS = "EXTPROC_DLLS=ONLY:D:\oracle\11.2.0\bin\oraclr11.dll")

  )

  (SID_DESC =

  (SID_NAME = smart)

  (ORACLE_HOME = D:\oracle\11.2.0)

  )

  (SID_DESC =

  (SID_NAME = smart)

  (GLOBAL_DBNAME = smart_DGMGRL)

  (ORACLE_HOME = D:\oracle\11.2.0)

  )

  )

  Listener.ora ensures

  LISTENER_REDO_SMART =

  (DESCRIPTION_LIST =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP (PORT = 1599))(HOST = host01))

  )

  )

  SID_LIST_LISTENER_REDO_SMART =

  (SID_LIST =

  (SID_DESC =

  (SID_NAME = CLRExtProc)

  (ORACLE_HOME = D:\oracle\11.2.0)

  (= Extproc PROGRAM)

  (ENVS = "EXTPROC_DLLS=ONLY:D:\oracle\11.2.0\bin\oraclr11.dll")

  )

  (SID_DESC =

  (SID_NAME = smart)

  (ORACLE_HOME = D:\oracle\11.2.0)

  )

  (SID_DESC =

  (SID_NAME = smart)

  (GLOBAL_DBNAME = smart_stb_DGMGRL)

  (ORACLE_HOME = D:\oracle\11.2.0)

  )

  )

  LSNRCTL > status listener_redo_smart

  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP (PORT = 1599))(HOST=host02)))

  STATUS of the LISTENER

  ------------------------

  Alias LISTENER_REDO_SMART

  TNSLSNR for Windows 64-bit version: Version 11.2.0.3.0 - Production

  Start date August 30, 2014 20:46:12

  Uptime 10 days 13 h 11 min 15 sec

  Draw level off

  Security ON: OS Local Authentication

  SNMP OFF

  Listener parameter File D:\oracle\11.2.0\network\admin\listener.ora

  Listener log file D:\oracle\diag\tnslsnr\host02\listener_redo_smart\alert\log.xml

  Summary of endpoints listening...

  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp (PORT = 1599))(HOST=host02)))

  Summary of services...

  Service 'CLRExtProc' has 1 instance (s).

  Instance of 'CLRExtProc', status UNKNOWN, has 1 operation for this service...

  Service 'HA_SMART' has 1 instance (s).

  'Smart' instance, State LOAN, has 1 operation for this service...

  'Smart' service has 2 occurrences.

  'Smart' instance, status UNKNOWN, has 1 operation for this service...

  'Smart' instance, State LOAN, has 1 operation for this service...

  Service 'smart_DGB' has 1 instance (s).

  'Smart' instance, State LOAN, has 1 operation for this service...

  Service 'smart_DGMGRL' has 1 instance (s).

  'Smart' instance, status UNKNOWN, has 1 operation for this service...

  The command completed successfully

  I would be most grateful if someone would have an idea of how solve it!

  Thanks in advance and best regards...

  Solved!

  A logon trigger that makes an insert in a table for each log in the appearance of this behavior. Since dataguard brings the standby database open mode ReadOnly cannot insert the trigger and the strange behavior as described happens!

  Hope that could help someone in the future...

  Kind regards

• Dynamic action for validation of date with the notification message plugin

  Hi all

  Someone help me please with dynamic action for validation of date with the message notification plugin. I have a form with two elements of the date picker control and message notification plugin.

  The requirement first user selects the exam is finished and then selects the date. So, if the date is greater than the date of the examination is over + 2 years then doesn't trigger the message notification plugin. I tried to create that dynamic action on the date picker date that triggers the scheduled issue notification message but I want to make conditional, I mean displays the message only if date of the selected is greater than the date of the exam is finished more than 2 years.

  In terms simple, notification is displayed only if provided is superior to (date of the exam is completed + 2 years).

  I use oracle apex 4.0 version and oracle 10g r2 database. I tried to reproduce the same requirement in my personal workspace. Here are the details. Please take a look.

  Workspace: raghu_workspace

  username: orton607

  password: orton607

  APP # 72193

  PG # 1

  Any help is appreciated.

  Thanks in advance.

  Orton.

  You can get the value of the date of entry:

  $(ele) .datePicker ('getDate');

  So what to add functions such as:

  function validateNotification (d1, d2) {}

  Date1 var = $(d1) .datepicker ('getDate');

  date2 var = $(d2) .datepicker ('getDate');

  if(date1 && date2) {}

  return ((date2.getTime()-date1.getTime())/(1000*24*60*60))>(365*2);

  } else {}

  Returns false;

  }

  }

  The logic based on setting (I have two years from years of 365 days preceding)

  Then in the D.A. specify a JavaScript expression as:

  validateNotification ('P2_REVIEW_COMPLETED', this.triggeringElement.id)

  Refer to page 2 for example.

• Download the virtual machine in a store of data with powercli

  Hello

  How to list the files of virtual machine on a store of data with PowerCLI

  I have a virtual machine and I want to see all the files in a data store (such as hard,.-flst.vmdk, .log, .nvram) using powercli. Is this possible?

  TKS.

  Try the following, it uses a function of my position of friendly units .

  Function Get-FriendlyUnit {}

  <>

  . Numbers converted small binary multiples SYNOPSIS

  . DESCRIPTION the function accepts a value and him will convert

  in the largest available binary unit.

  . Author NOTES: Luc relaxing

  . Value of the PARAMETER

  The value to convert.

  This number must be positive.

  . IEC PARAMETER

  A switch to indicate whether the function should return the CIS

  Unit, or the names of the units most commonly used names.

  The default is to use the commonly used unit names.

  . EXAMPLE OF

  PS > Get-FriendlyUnit-value 123456

  . EXAMPLE OF

  PS > 123456 | Get-FriendlyUnit - CIS

  . EXAMPLE OF

  PS > Get-FriendlyUnit-value 123456,789123, 45678

  #>

  (param

  [CmdletBinding()]

  [parameter (mandatory = $true, ValueFromPipeline = $true)]

  [double []] $Value,.

  [switch] $IEC

  )

  Begin {}

  $OldUnits = "B", "KB", "MB", "GB", "TB", "PB", "EB", "ZB", "YB".

  $IecUnits = 'B', 'KiB', 'MiB', "GiB", "TiB", "PIF", "BANK", "ZiB", "YiB".

  If ($IEC) {$units = $IecUnits} else {$units = $OldUnits}

  }

  {in process

  $Value | %{

  If ($_ - lt 0) {}

  Write-Error "Numbers must be positive."

  breaking

  }

  If ($value - gt 0) {}

  $modifier = [math]: Floor([Math]::Log($_,1KB)))

  }

  else {}

  $modifier = 0

  }

  New-object PSObject-property @ {}

  Value = $_ / [math]: Pow(1KB,$modifier)

  Unit = & {if ($modifier - lt $units. {Count) {$units [$modifier]} else {'1KO E {0}' f $modifier}}

  }

  }

  }

  }

  foreach ($vm in (Get-View - ViewType VirtualMachine - property Name, 'LayoutEx.File')) {}

  $vm. LayoutEx.File |

  Select @{N = "VM"; E = {$vm. Name}},

  @{N = 'Name'; E={$_. Name.Split(' ') [1]. "Split('/') [1]}},"

  @{N = "Path"; E={$_. Name}},

  @{N = 'FileType'; E={$_. Type}},

  @{N = "Datastore"; E={$_. Name.Split(']') [0]. TrimStart('[')}},

  @{N = "size"; E = {}

  $val = get-FriendlyUnit-value of $_. Size

  "{0:n2} {1}" f $val. Value, $val. Unit

  }}

  }

• Several files of data with autoextend ON &amp; OFF

  Hello
  
  Is there any negative impact, and if I add a new data file to the storage space with auto-prolonger ON, while the old data file for the same storage space is OFF.
  
  Here is my scenario:
  I have 3 groups of disks in my ASM (DATA1, DATA2, and DATA3) instance.
  
  Now, all my tablespace's datafiles of Data1 with auto - THEY extend. (It was a mitake creating tablespace). To distribute the disk space, I intend to add a new data files of DATA 2 & 3 for half of the storage space.
  And for these storage spaces, I'll turn off the auto-prolonger for old data files and marketing the autoextend for new data files.
  
  The idea is, Oracle will begin to load the data for the new ASM disk groups in the future and I'll get the appropriate disk space distribution. Is there a problem with this approach? (In particular, when one of my datafile autoextend is DISABLED and other is lit).
  
  Your advice is appreciated!
  
  Kind regards

  In fact, it is a valid strategy to ensure that some datafile (s) in some single user grow while others stay the same size.

  Correctly, several data files must have been created earlier so that data would have been divided on all files. However, you can always add new data with AUTOEXTEND ON files and set the old files of data AUTOEXTEND off at any time (and switch ON and OFF as needed if you need to dynamically manage the use of the space of the file system, when you move data to new file systems files).

  Is there a negative impact

  N °

  Hemant K Collette

• Back up my data with installation DVD

  I want to transfer my data to an external with installation DVD drive because my Mac OS isn't bootable anymore because of the sierra of mac os. So I'll do a new install of snow leopard on my macbook late 2009. Does anyone know how to transfer my data in my external drive across the disc of the DVD Installer prior to installation of Snow Leopard sanitation? Somone told me to do it this way, but I don't know how.

  I recommend strongly against from any attempt of recovery/reinstallation without a valid (and verified) backup on a different disk. As you are still able to boot the system with the installation DVD, you can

  • use Disk Utility on the installation DVD to create a full backup of your internal drive to an external
  • copy /Applications and /Users to an external drive (which should focus on 'all' critical data)

  Then comes to an attempt of resettlement.

  You can restore your data after the installation of the operating system. First make a note of bookmark, password or registration required by your system.

  Perform a full backup with time machine, then restart with your installation dvd, then reinstall the operating system

  When Setup restarts, you can restore your data with the migration wizard.

  When possible, you should do a clean install with 3rd party applications and drivers HW until the migration may or may not be compatible with the older operating system and removes the possibility of corruption of preference.

• As it can be seen in the OS 3 Web page will be available today, 13 September. However my Watch App does not seem to see the update according to the availability. When I go to software update, he repeats that my watch is up-to-date with OS 2.2.2. OS3 will

  As it can be seen in the OS 3 Web page will be available today, 13 September. However my Watch App does not seem to see the update according to the availability. When I go to software update, he repeats that my watch is up-to-date with OS 2.2.2. OS3 will be available today?

  Hello

  Yes - Apple advises that watch OS 3 is scheduled to be released sometime today.

• Dates with no thumb nails in the list of 'Moments '.

  Have deleted (totally) pictures of a 'Moment' but the date still appears in the list of 'Time' (sidebar selection is 'Photos'

  When you scroll the program list of the 'Moments' will crash when it encounters a 'moment' date only

  Please explain what you see

  and it would be good to get up-to-date with OS X 10.11.4 and Photos 1.5 - OS X 10.10.5 is four day behind and missing many new features and bug fixes

  LN

• I have a 6 s, using tracfone - don't you data with cellular, wi - fi only

  My carrier is tracfone and my new 6 s gets only the data with a wi - fi, zero with cell - is the problem with my phone from tracfone?

  joemehling wrote:

  My carrier is tracfone and my new 6 s gets only the data with a wi - fi, zero with cell - is the problem with my phone from tracfone?

  Yes, cellular data are a function of carrier.

• lost all my data with no back upward after update ios9 can there be found

  updated my iPhone 6 more ios9 lost all the data with no back up is it possible I can get pictures of data and applications and how can I do this?

  You can re - download all your media, and if you use iCloud for Messages, Notes, Contacts, calendars, stream of pictures, etc, then once you connect to iCloud, these elements will be re - download to your device. Or, you can plug in to iTunes on the computer you sync with and synchronize your media.

  See you soon,.

  GB

• The GPS data with other analyzed data record

  Hello!

  I am a new user of DASYLab and not very good with coding, so please bear with me! I try to record (timestamp, latitude, longitude) already analysed GPS data with other data (accelerometer, etc.) in the same. DDF file. Right, GPS analysed is now sent through a series of three demultiplexers for each signal and only 1 of 16 channels, reducing the size of the output data. This data is then saved in a. The CAD file. Other data on average, recorded in one. DDF file, then saved another. The CAD file. We used to compare the data from the GPS and other devices by comparing timestamps.

  I would like to save all data to a file, either. DDF of. CSA (.) DDF would be preferable).

  When I try to add more channels in the. DDF save the module after the demultiplexer black box and GPS data to it, I get an error saying "the data to an entry in this module are the wrong type." I also receive this error when trying to send the data GPS to the. CSA Save module. I learned that this means that the size of the files is not the same of this thread. My question is, how can I make sure that the data have the same characteristics of time so I can save to the same file?

  If you need more information I would be happy to provide it, I apologize if I have something important to go.

  Thanks for reading,

  etdiv

  That's what I needed. Your time is the driver. In the RS232 input module, click the Options button.

  Select the measurement of output value, and then click the button on the time Base and select sync/time Base driver.

  That should allow you to write to the DDF file.

  

• Reading data with NOR-5772

  I'm reading the data with the NOR-5772.  I tried the example code(NI_5772-Getting_Started_(Host).vi), and it will read noise (with nothing plugged into channels).   However when I try to send a signal (such as that generated with a NEITHER-DAQ card on the same system and routed to AI0/AI1), the signal does not change a lot of the noise.   I have the drivers updated and am under LabView 2012 (32-bit and 64-bit, I get the same result)

  Everyone has to experience this problem?   Thank you.

  Yes, the device is AC coupled and has a high pass filter.  There is a diagram of frequency response on page 20 of the user manual:

  http://www.NI.com/PDF/manuals/373625a.PDF

  It seems that the cuttoff frequency is about 100 kHz.

• Separation of data with multiple headers

  Hello

  I have a data set that has 6 columns with headers containing information for a cycle of some (data file is attached). About 200 lines later, so that I have a different set of data with 6 columns cycle 2 with a space and a new header and any other 400 lines later I data for cycle 5 with a space and a new header. This pattern is repeated throughout the data set.

  I need a way to separate this data so that I can trace different cycles. When I import this data set in Diadem with the Wizzard use it does not recognize the spaces and the new headers. He label spaces and headers "NO value", there are discontinuities in the data. Is there a way to separate the cycles in this dataset in tiara?

  For example, I would have 215 lines thru 220 630 thru 6 lines, lines 635 thru 1046, lines 1051 to 1462, etc.. This way I can trace different cycles against the execution time.

  Hi wils01,

  Here's a use I created that loads your file data in each cycle in a separate group of the data portal.

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• With a sampling of the data with DAQMX, error-200279 occurs when making 2d array dbl

  Hello

  I did a system of simple analog voltage with DAQMX data acquisition.

  It is made for reading of capacitance, where output capacitance value out of a circuit in the periodic voltage signal.

  What I want is to get data from four capacitors simultaneously through four channels, using samples n n (dbl 2d).

  The structure of my VI is almost similar with examples of continuous sampling of voltage in LabView, with the exception of a few other calculations in the loop.

  And for the synchronization of the trigger, I've corrected the edge of release with the external signal from the capacitance reading circuit.

  Version no. 1 has a channel for data input voltage. Version n ° 2 has four channels for the input data.

  While ver.1 can get accurate reading of four capacitors circuit data each (a single channel at a time),.

  ver.2 acquires four channels of data, with a single thin data channel, all the others were wrong.

  I saw a 200279 error occur in the DAQMX read part 2d dbl, so I tried increasing the buffers by changing the sampling frequency or the number of samples, but it wasn't everything.

  I rose for most of the forums with the 200279 error, but the solution would not work on mine.

  Anyone can find the problem? I will attach my screws it may include a bit of Korean language, but most of them are in English, shouldn't be too hard to recognize. Sorry for the inconvenience.

  Oh I forgot, my DAQ is NI USB-6259, and it works in Win XP sp3 and LabView 8.6.

  Thank you.

  Hello Azurenight,

  The 6259 is a DAQ card of the M Series Multiplexed, which means that it is not possible to sample each signal at the same instant, rather the channels are all sent through the ADC even and must be sampled in order. More information on this can be found here:

  LabVIEW Help: Multiplexing compared with simultaneous sampling

  http://zone.NI.com/reference/en-XX/help/370466W-01/mxcncpts/multisimulsamp/

  It may still be possible to get the data you need with the card you have - could you give more information about the maximum eligible period between samples on different channels?

  If you require * real * simultaneous sampling, you will probably need different hardware.

  Kind regards

• Examples for the new reference value of data with LVOOP

  Hello

  I'm looking for examples on how to use the new function of data with the LV class reference to achieve access to the ByRef objects.

  I would be very grateful for some codes.

  Greetings

  Hello

  a reall call by reference is not possible in LabVIEW. A good method is to use a queue with the size of a single element - then you can always move the reference to the queue and to read and write the new items in there.

  Or you use a FGV to store your object, which would work as well.

  

  RMathews