Separation of data with multiple headers

Similar Questions

• Passage of data with multiple senders to multiple rates for forest exploitation

  

  The image above shows my situation.  I have a 10 Hz Datasocket read, reading UDP 10 Hz and 100 Hz DAQmx read.  I need assemble all these data in a single stream for logging.  If I'm waiting for my network stuff, I won't be able to collect the data (because of the dependencies of data stream).  If I set waiting periods (10 ms to 100 Hz), playback of the UDP will throw an error.  So if I ignore the error, I never found out if the network actually times out.  Any help is appreciated.

  The code is obviously here for representation and not intended to be an element of code work

  
  

• date max with multiple joins of tables

  Looking for expert advice on the use of max (date) with multiple joins of tables. Several people have tried (and failed) - HELP Please!
  
  The goal is to retrieve the most current joined line of NBRJOBS_EFFECTIVE_DATE for each unique NBRJOBS_PIDM. There are several lines by PIDM with various EFFECTIVE_DATEs. The following SQL returns about 1/3 of the files and there are also some multiples.
  
  The keys are PIDM, POSN and suff
  
  Select NBRJOBS. NBRJOBS.*,
  NBRBJOB. NBRBJOB.*
  of POSNCTL. Inner join of NBRBJOB NBRBJOB POSNCTL. NBRJOBS NBRJOBS on (NBRBJOB. NBRBJOB_PIDM = NBRJOBS. NBRJOBS_PIDM) and (NBRBJOB. NBRBJOB_POSN = NBRJOBS. NBRJOBS_POSN) and (NBRBJOB. NBRBJOB_SUFF = NBRJOBS. NBRJOBS_SUFF)
  where NBRJOBS. NBRJOBS_SUFF <>'LS '.
  and NBRBJOB. NBRBJOB_CONTRACT_TYPE = 'P '.
  and NBRJOBS. NBRJOBS_EFFECTIVE_DATE =
  (select Max (NBRJOBS1. NBRJOBS_EFFECTIVE_DATE) as 'EffectDate '.
  of POSNCTL. NBRJOBS NBRJOBS1
  where NBRJOBS1. NBRJOBS_PIDM = NBRJOBS. NBRJOBS_PIDM
  and NBRJOBS1. NBRJOBS_POSN = NBRJOBS. NBRJOBS_POSN
  and NBRJOBS1. NBRJOBS_SUFF = NBRJOBS. NBRJOBS_SUFF
  and NBRJOBS1. NBRJOBS_SUFF <>'LS '.
  and NBRJOBS1. NBRJOBS_EFFECTIVE_DATE < = to_date('2011/11/15','yy/mm/dd'))
  order of NBRJOBS. NBRJOBS_PIDM

  Welcome to the forum!

  We don't know what you are trying to do.
  You want all of the columns in the rows where NBRJOBS_EFFECTIVE_DATE is the date limit before a given date (November 15, 2011 in this example) for all rows in the result set with this NBRJOBS_PIDM? If so, here is one way:

  with         GOT_R_NUM     as
  (
       select       NBRJOBS.NBRJOBS.*,
              NBRBJOB.NBRBJOB.*     -- You may have to give aliases, so that every column has a unique name
       ,       rank () over ( partition by  NBRJOBS.NBRJOBS_PIDM
                                 order by      NBRJOBS.NBRJOBS_EFFECTIVE_DATE     desc
                        )             as R_NUM
       from          POSNCTL.NBRBJOB NBRBJOB
       inner join      POSNCTL.NBRJOBS NBRJOBS       on    (NBRBJOB.NBRBJOB_PIDM = NBRJOBS.NBRJOBS_PIDM)
                                          and      (NBRBJOB.NBRBJOB_POSN = NBRJOBS.NBRJOBS_POSN)
                                    and      (NBRBJOB.NBRBJOB_SUFF = NBRJOBS.NBRJOBS_SUFF)
       where       NBRJOBS.NBRJOBS_SUFF             != 'LS'       -- Is this what you meant?
       and        NBRBJOB.NBRBJOB_CONTRACT_TYPE   ='P'
       and       NBRJOBS.NBRJOBS_EFFECTIVE_DATE  <= to_date ('2011/11/15', 'yyyy/mm/dd')
  )
  select       *     -- Or list all columns except R_NUM
  from       GOT_R_NUM
  where       R_NUM          = 1
  order by  NBRJOBS_PIDM
  ;
  

  Normally this site does not display the <>inequality operator; He thinks it's some kind of beacon.
  Whenever you post on this site, use the other inequality operator (equivalent), *! = *.

  I hope that answers your question.
  If not, post a small example of data (CREATE TABLE and INSERT, only relevant columns instructions) for all the tables involved and the results desired from these data.
  Explain, using specific examples, how you get these results from these data.
  Always tell what version of Oracle you are using.
  You will get better results faster if you always include this information whenever you have a problem.

• Indicator of waveform data dashboard with multiple locations

  I have a chart in waveform with multiple locations on my main VI running.

  I use the Application Dashboard data 2.2.1 on my Ipad to monitor table of wave shape of my running app.  I placed a marker on my Ipad and also related waveform with my waveform array variable.  I can't play my data dashboard application because it shows unable to connect to the server.  I noticed that it is because of multiple plots being plotted on my table of waveform.

  I could only play the App data dashboard when it is just a single parcel related to an indicator on the App.

  My question is if it's possible to have a graphical indicator of waveform on a data dashboard that has several plots being plotted and not only a single square, and how to configure it?

  Thank you.

  Click on Bravo and select as an accepted answer.  You are welcome.

• Problems with multiple worksheets XY plotting (program generates repeated data)

  Hello

  I want to make a small program that will reduce the amount of time to go forward with the measurement data. I get data into .dat format, where all the files consist of frequency measurement with an X and a Y column. The problem is that I made 4 experiments (X column is the same for each experience) with 15 measures file each and more than 500 points of measurement in each file. I would like to make a simple manipulation and this copy that information to a file with same X column and multi-column, later I could use these data with Excel or origin (do it manually, it's frustrating and time consuming).

  At the beginning my program reads the background information with X and Y (b), and after I open the worksheet to insert the X and data of Y (n). (make a simple manipulation, like dividing Y (n) /Y (b), program show a graph of the current data and another graph multiple data, which are stored and must be exported in .txt, .dat or directly to Excel (which is more preferable)). I'm OK with the opening of several files of data, but which are not okay with copy/paste file and handle all that data manually, but that's my motivation for this program.

  The attached example can do all this (except for the entry in the file). He draws multiple charts on a XY chart using cluster and travel records. It is even possible to extract data in Excel, all that graphic, but the real problems comes with data are always added because of the loop. This gives a lot of empty and repeated data later. I'm jonesing to get rid of this. I have also attached several files of measure: 1 background and 3 measures.

  P.S. I tried to save time thanks to this program, but now, I spent more time than if I did it manually

  Your program absolutely no sense. What is the purpose of the structure of sequence? It just sits there, operating both in parallel to the while loop. Probably that you read from the local variables before other parts of the program had a chance to write valid data for them.

  In the while loop, you have a case of timeout that adds the same data over and over again, every 50ms. Why?

  Your mechanical actions "switch release" are misguided. Use actions to latch and remove structures deal as part of the event.

  Try to rethink the problem once the mode, and then solve the problem with 20% of your current code. See how far you get.

• How to query the data of Contact with multiple fields

  How can I query the data of Contact with multiple fields?

  For example, I'll get contacts which are changed after a point at the specified time and whose country is US. How could I make the chain of research of the SOAP API "Query"?

  And I also want to know how to make a search term for RESTful API for contacts above.

  Any suggestions?

  Thank you.

  Hi Biao,

  The following document describes how query for multiple fields using the SOAP API: request a Contact from several fields.

  And you can search multiple fields using the REST API with the & operator. For example, to search for a Contact by e-mail address and date of creation:

  • " emailAddress ='[email protected]' & converted > = '1369828886'".

  Hope this helps and please let us know if you need more information.

  Thank you

  Fred

• tablespace with multiple data files

  Hi all
  
  We have RHEL4 server with oracle 10 g 2 inside.
  
  can we create a tablespace with multiple data files? I mean while creating a tablespace itself, we should be able to create two or more data files (should not use ALTER tablespace command).
  
  If possible, please give me the SQL to do this (assume that I need to create a tablespace with two data files).
  
  Thanks in advance...

  Not so difficult isn't it?

  create tablespace datafile test
  '1.dbf' size 1 m REUSE AUTOEXTEND ON NEXT 32 M MAXSIZE 1500 M,
  '2.dbf' size 1 M REUSE AUTOEXTEND ON NEXT 32 M MAXSIZE 1500 M
  EXTENT MANAGEMENT SEGMENT LOCAL SPACE MANAGEMENT AUTO;

• Aggregation of data from multiple sources with BSE

  Hello
  
  I want to aggregate data from multiple data sources with a BSE service and after this call a bpel with a process of construction of these data.
  1 read data from the data source (dbadapter-select-call)
  2. read data from the data source B (dbadapter-select-call)
  3 assemble the data in xsl-equiped
  4. call bpel
  
  Is this possible? How can I get data from the first call and the second call to conversion data? If I receive data from the second call, the first call data seem to be lost.
  
  Any ideas?
  Gregor

  Gregor,

  It seems that this aggregation of data is not possible in the BSE. This can be done in BPEL too using only assigned but not using transformations. I tried to use transformations by giving the third argument to the function ora: processXSLT. But couldnot get the desired result.

  For more information on the passage of a second variable (of another schema) as a parameter to xslt pls refer to the post office

  http://blogs.Oracle.com/rammenon/2007/05/

  and the bug fix 'passage BPEL Variable content in XSLT as parameters'.

  Hope this helps you.

  Thank you, Vincent.

• play sounds temporary and file of your choice when reading data with VISA functions?

  Hello.

  I read the function of reading data with VISA and then I use as multiple functions to display data on the graph. everything is OK.

  now, I want to play a sound specified (like a song in my desired folder 3s) signal which cross above the specified value range. then after the desired time, it will wait still new cross above the specified value and this repetition of the procedure until I stop the program.

  Data MCU is from and it does not stop when his game system and what system of incoming data for this part (his play) will ignore them pending that outdated.

  I use this for reading data and part VI mentioned which belongs to her is empty and I don't know what I have to do?

  altougth I use an another while loop for his apartment because I want to save time CPU.

  Thank you.

  

  I recommend you do the data type of the notifier a cluster that contains a path and a numeric (double).  The path indicates the reader what file to play.  Digital is the duration.

  Now in a way a bit complicated, but really good stop your second loop.  Do not use a second notification.  Instead, send the normal notification but not use a path for the path in the cluster.  Your second loop can write a check for the path of a not and stops when that is received.

• Can transport data in multiple graphs

  Hey,.

  Right now I'm working on a project of analogue data of feedback from sensors on a petblowing machine to a pc at the office.

  So far, I can send messages with a different id... The messages of 4 part Arb ID, ID seen, length (Yes), value.

  The intension is to separate data on different graphics. As ID 32 goes to figure 3 and 16 ID goes to figure 2. Now it's my problem.

  The values are similar 0-255, and they must also be monitored. So I had 4 plots on a graph to change the color on the value.

  But when I want to redirect messages to the different graphics that I receive all my data but the double. Or when I send the data to a chart the

  another past and if I look at with my probe he values changing if nothing was happening. So far, it works when I show my

  data on a graph and proceed with a deal that leaves an id to pass so that the graph can be drawn. Someone an idea how I can make it work with multiple

  graphs?

  If you want to take a look at the code all also.

  Thanks in advance...

  OK so I'm done today of the VI... Normally, everything should work as it should.

  I want to thank demux for the great support and everybody to watch...

  The final VI is attached...

• Gears - error when you try to insert values into a table with multiple columns

  Hello

  I started playing with the gears and SQlLite today and I get an error when I try to insert values into a table with multiple columns.

  I have:

  var db = google.gears.factory.create('beta.database');
      db.open('developerSet');
      db.execute('create table if not exists Developers (DeveloperName text, DeveloperAge int)');
  
      var devName = "Davy"
      var devAge = 32;
  
      try {
          db.execute('insert into Developers values (?, ?)', [devName, devAge]);
          alert('success');
      }
      catch (e) {
          alert(e);
      }
  

  I get the error:

  net.rim.device.api.database.DatabaseException; insert into developers values (?,?): SQL logic error or missing database.

  I use this reference: http://code.google.com/apis/gears/api_database.html

  Everything works if I have only one field as:

  var db = google.gears.factory.create('beta.database');
      db.open('developerSet');
      db.execute('create table if not exists Developers (DeveloperName text)');
  
      var devName = "Davy"
      var devAge = 32;
  
      try {
          db.execute('insert into Developers values (?)', [devName]);
          alert('success');
      }
      catch (e) {
          alert(e);
      }
  

  I use the plug-in Visual Studio 2.0 for 2008 that are running Windows XP SP and Simulator 2.13.0.56

  Thank you

  Davy

  Yes, a SQLite database will persist between battery pulls.  The database is registered either to internal MEM or removable media (not the device memory), depending on which is available on your device.

  In general, its not considered a best practice to remove your table as soon as it is empty and re - create it again when you want to add data.  This adds extra overhead fresh for the final, delete and insert first for a given table.  Instead, define and finalize your drawing before you create your table.  Once created, review the static schema.

  That being said, for development purposes, it may be easier to provide an easy way to drop your tables while you develop your schema.

  See you soon,.

  Adam

• Is possible to write the INSERT statement that fills two columns: 'word' and 'sense' of the file text with multiple lines - in each line is followed word that is the meaning?

  Is possible to write the INSERT statement that fills two columns: 'word' and 'sense' of the file text with multiple lines - in each line is followed word that is the meaning?

  Hello

  2796614 wrote:

  Is possible to write the INSERT statement that fills two columns: 'word' and 'sense' of the file text with multiple lines - in each line is followed word that is the meaning?

  Of course, it is possible.  According to what the text file looks like to, you can create an external table that treats the text file as if it were a table.  Otherwise, you can always read the file in PL/SQL, using the utl_file package and INSERT of PL/SQL commands.

  You have problems whatever you wantt?  If so, your zip code and explain what the problem is.

  Whenever you have any questions, please post a small example of data (CREATE TABLE and only relevant columns, INSERT statements) for all of the tables involved and the exact results you want from these data, so that people who want to help you can recreate the problem and test their ideas.  In this case, also post a small sample of the text involved file.

  If you ask about a DML operation, such as INSERT, then INSERT statements, you post should show what looks like the tables before the DML, and the results will be the content of the table changed after the DML.

  Explain, using specific examples, how you get these results from these data.

  Always say what version of Oracle you are using (for example, 11.2.0.2.0).

  See the FAQ forum: Re: 2. How can I ask a question on the forums?

• With multiple vcenter inventory

  Hi guys,.

  Try to get connected with multiple vcenter inventory,

  Have problems with the release of some VM are attributed to wrong Vcenter and running OS is not always correct.

  Can anyone help?

  Here's the script:

  $VmInfo = Foreach ($vcenter in $global: DefaultVIServers) {}

  ForEach ($Datacenter in (Get-Data Center |)) Sort - Object - property name)) {}

  ForEach ($Cluster in ($Datacenter |)) Get-Cluster | Sort - Object - property name)) {}

  ForEach ($VM in ($Cluster |)) Get - VM | Sort - Object - property name)) {}

  ForEach ($HardDisk to ($VM |)) Get-hard drive | Sort - Object - property name)) {}

  "" | Select-Object - property @{N = "VM"; E = {$VM. Name}},

  @{N = 'Vcenter'; E = {$vcenter. Name}},

  @{N = "OS"; E = {$vm. Guest.OsFullName}},

  @{N = 'Center'; {E = {$Datacenter.Name}}.

  @{N = 'Cluster'; E = {$cluster. Name}},

  @{N = 'Host'; E = {$vm. VMHost.Name}},

  @{N = "HostVersion"; E = {$vm. VMHost.version}}

  }

  }

  }

  }

  }

  $VmInfo | Export-Csv - NoTypeInformation - UseCulture-Path "D:\report.csv".

  Try like this.

  -What is produced fewer lines?

  $VmInfo = Foreach ($vcenter in $global: DefaultVIServers) {}

  ForEach ($Datacenter in (Get-Data Center-Server $vcenter |)) Sort - Object - property name)) {}

  ForEach ($Cluster in ($Datacenter |)) Get-Cluster-Server $vcenter | Sort - Object - property name)) {}

  ForEach ($VM in ($Cluster |)) Get-VM-Server $vcenter | Sort - Object - property name)) {}

  ForEach ($HardDisk to ($VM |)) Get-disk hard-Server $vcenter | Sort - Object - property name)) {}

  "" | Select-Object - property @{N = "VM"; E = {$VM. Name}},

  @{N = 'Vcenter'; E = {$vcenter. Name}},

  @{N = "OS"; E = {$vm. Guest.OsFullName}},

  @{N = 'Center'; {E = {$Datacenter.Name}}.

  @{N = 'Cluster'; E = {$cluster. Name}},

  @{N = 'Host'; E = {$vm. VMHost.Name}},

  @{N = "HostVersion"; E = {$vm. VMHost.version}}

  }

  }

  }

  }

  }

  $VmInfo | Export-Csv - NoTypeInformation - UseCulture-Path "D:\report.csv".

• I have CC with multiple desktop applications; My wife has CC for Photoshop only. We all have both need to use Acrobat DC...

  I have CC with multiple desktop applications; My wife has CC for Photoshop only. We all have both need to use Acrobat DC, which is already enabled on my computer. She comes to install Acrobat DC on his computer via the creative Cloud, but he identifies himself as a trial. How his installation of Acrobat are activated under my account (as the second of two authorized activations)?

  How his installation of Acrobat are activated under my account (as the second of two authorized activations)?

  Two activations by Adobe ID are allowed provided that they are used by the same person and only is in use at any time.

  It can be used simultaneously by two different people.

  DC Acrobat is installed as a trial on your wife's computer, because it is signed with his Adobe ID and there is no active subscription for Acrobat DC under its identifier.

  Your wife will need to subscribe separately the Acrobat DC plan only App or plan all the Apps.

• Download the virtual machine in a store of data with powercli

  Hello

  How to list the files of virtual machine on a store of data with PowerCLI

  I have a virtual machine and I want to see all the files in a data store (such as hard,.-flst.vmdk, .log, .nvram) using powercli. Is this possible?

  TKS.

  Try the following, it uses a function of my position of friendly units .

  Function Get-FriendlyUnit {}

  <>

  . Numbers converted small binary multiples SYNOPSIS

  . DESCRIPTION the function accepts a value and him will convert

  in the largest available binary unit.

  . Author NOTES: Luc relaxing

  . Value of the PARAMETER

  The value to convert.

  This number must be positive.

  . IEC PARAMETER

  A switch to indicate whether the function should return the CIS

  Unit, or the names of the units most commonly used names.

  The default is to use the commonly used unit names.

  . EXAMPLE OF

  PS > Get-FriendlyUnit-value 123456

  . EXAMPLE OF

  PS > 123456 | Get-FriendlyUnit - CIS

  . EXAMPLE OF

  PS > Get-FriendlyUnit-value 123456,789123, 45678

  #>

  (param

  [CmdletBinding()]

  [parameter (mandatory = $true, ValueFromPipeline = $true)]

  [double []] $Value,.

  [switch] $IEC

  )

  Begin {}

  $OldUnits = "B", "KB", "MB", "GB", "TB", "PB", "EB", "ZB", "YB".

  $IecUnits = 'B', 'KiB', 'MiB', "GiB", "TiB", "PIF", "BANK", "ZiB", "YiB".

  If ($IEC) {$units = $IecUnits} else {$units = $OldUnits}

  }

  {in process

  $Value | %{

  If ($_ - lt 0) {}

  Write-Error "Numbers must be positive."

  breaking

  }

  If ($value - gt 0) {}

  $modifier = [math]: Floor([Math]::Log($_,1KB)))

  }

  else {}

  $modifier = 0

  }

  New-object PSObject-property @ {}

  Value = $_ / [math]: Pow(1KB,$modifier)

  Unit = & {if ($modifier - lt $units. {Count) {$units [$modifier]} else {'1KO E {0}' f $modifier}}

  }

  }

  }

  }

  foreach ($vm in (Get-View - ViewType VirtualMachine - property Name, 'LayoutEx.File')) {}

  $vm. LayoutEx.File |

  Select @{N = "VM"; E = {$vm. Name}},

  @{N = 'Name'; E={$_. Name.Split(' ') [1]. "Split('/') [1]}},"

  @{N = "Path"; E={$_. Name}},

  @{N = 'FileType'; E={$_. Type}},

  @{N = "Datastore"; E={$_. Name.Split(']') [0]. TrimStart('[')}},

  @{N = "size"; E = {}

  $val = get-FriendlyUnit-value of $_. Size

  "{0:n2} {1}" f $val. Value, $val. Unit

  }}

  }