custom conditions

Similar Questions

• How to create Postexpression that creates a "jumpToEnd" depending on the outcome?

  Hello

  I want to create a Popup with buttons. button_1 = continue and button_2 = skip to the end.

  How can I put this condition inside the PostExpression of the popup teststep?

  Thank you

  Hello

  Perhaps an easier way to achieve this behavior is to use the Actions rather than the expression.

  Create your Message Popup with buttons 1 = 'Continue' and 2 = 'Jump To End':

  

  Then change the properties-> Actions Post use the following custom condition (Step.Result.ButtonHit == 2) to goto cleanup:

  

  Kind regards

  Charlie

• masking steps during execution

  I have a sous-suite that I point the user to when asked to isolate a card failure.  To give them some flexibility, I got a popup that gives them a certain number of options (see attachment).  I have an m.o. that indicates the individual steps these select/run (i.e. '1' or '3' in the png).  Control flow (denoted by '2') is the noise they don't really need to worry and may / will cause confusion (and possibly problems for me if they select them accidentally).  Is there a way to hide these measures flow during execution control so that the user sees '1' and '2' (and other similar 'valid' selections?

  If there wasn't a need explicit to have the flow control logic, then I'd be tempted to compact all in the post of the Popup Message action.

  

  By setting the Popup Message Action to go to the step, , use Custom Condition (TRUE):

  

  And by using the following Expression:

  Step.Result.ButtonHit == 1? RunState.Sequence.Main ["MR_RPack_R55"]. UniqueStepId:
  
  Step.Result.ButtonHit == 2? "" "RunState.Sequence.Main ["End_PCI_Isolation"]." UniqueStepId:
  
  Step.Result.ButtonHit is 3? RunState.Sequence.Main ["MR_R103"]. UniqueStepId:
  
  Step.Result.ButtonHit is 4? "" "RunState.Sequence.Main ["PCI_Intf_PT"]." UniqueStepId: «»

  It should be appropriate level following the Popup Message.

  (SequenceFile attached).

  I hope this helps.

  Charlie

• StepProperty Loader and subsequences

  Hello

  Usually, we charge our limits and - settings (inBuf) to a SQL Server with the database followed by a property Loader. Because we have a few PCs with a bad network connection we want to load the limits from a local text file. Everything works fine but the StepProperty charger generates a run-time error in the file text-limit is a Stepname which does not exist in the main sequence. With the old concept (DatabaseSteps) the shipper of property ignored who and showed the State of affairs. With the new concept of loading from a text file the PropertyLoader indicates the error status (which I cannot ignore, but the user sees a red step). Is it possible to configure the bootloader property to skip the Stepnames that do not exist in the sequence? (these stepnames usually exist in a sous-suite)

  I have attached the file MySeq and the TextLimitFile.

  (We use TestStand 4.2.1)

  Thank you for your help

  Hi Paul,.

  I have looked into this and I've seen the behaviour you're talking about. If you load a database limits, they load without error, even if the sequence contains all the steps of the database. However, if you load a file limits, a runtime error occurs if the sequence does contain all the steps of the file.

  We are currently investigating this option to determine the best way to solve the problem long term, but I wanted to show you a solution that is us venus with that, in my view, would you allow to use the shipper of the property the way you want.

  If you set the property Loader step to 'Ignore the Run-Time Error', the error dialog box will not appear. This allows the sequence to run, but as you said, the property stage Loader will display a red "Error" step. To change this, we can use a Custom Action after market the property Loader. See the following screenshot:

  

  This custom condition sets the stage of 'Success' that long since there was no other error or the error code was - 18 (that is the mistake that we see when there aren't all of the steps in the sequence file). In the case of any other error, the sequence ends.

  I hope this work around will help you with your current application, but if you have any questions or concerns about this, please do let me know.

• Interactive termination

  I met an interesting scenario that I have a hard time explaining why it is implemented: in TestStand v4.2.1 and earlier versions using the PostAction to close based on a custom expression has different behaviors based on how the step is executed. For example:

  (to test this, create a new sequence and in the MainSequence, create an instruction step.) Then define the steps of training Actions Post on Pass: condition (on Condition that true) to finish running, check the Use Custom Condition and the value of the Expression to "True".)

  1. from the run menu, select Execute MainSequence -, the result is a completed.

  2. Select the step, and then in the run menu, select execute selected as follows using > Single Pass - the result is a past performance.

  3. in the run menu, select Run Single Pass - the result is a completed.

  I think that all three should be completed executions, but the second displays a status of passage.

  If you create a sequence in the same file, place the statement 'Cancel' in the sequence, add a call to sequence for this sequence in the MainSequence, and then use respectively two above to select and execute the call of the sequence, execution will be displayed as null and void.

  So it seems that TestStand will not honour the PostAction event terminate for the steps that are selected directly in the interactive executions. Is it a feature/bug or am I missing something?

  We postulate that this is indeed a bug and a CAR is documented to R & D. thanks for your help

• Questions about the function "movie Diff file with...". »

  Hello

  I started working on a project where I'm now a piece of the old code written by an employee has since left my company.  This is a file of sequence TestStand 3.0 calling on Labview 7.0 code. The thing is, there were two of these facilities at different times and, somewhere in the Woods between stations 1 & 2, the code base diverged.  Part of it was due to not being able to get the material in double right for the PXI chassis and part was, apparently, due to the fact that the customer has used the 2 machines to test different models of the object to measure.

  So, I'm looking for copies of the code installed on both machines using the diff feature in TestStand base.  (If that makes a difference, I do this view in TestStand 3.5 since TS3.0 disappeared mysteriously some corrupt on me right now on my main development machine, and if the memories are good, you need to uninstall all the latest version of TS to reinstall an earlier version.)  A quite fun process, no doubt, but a little of your time.)

  Anyway, the first thing I noticed is that many sequence steps have different values of ID of the step Properties.Step look like this: "ID #: 2vMTp0db002mQDXArddRSA.  Play with the diff screen showed an option "Ignore the unique ID of the Step" which got rid of these.  With regard to these single-step ID: when they are generated and they remain constant on a particular machine?  Beyond simple curiosity, I wonder as an another diff is in some of the "on spending target ' or 'On Custom Condition true target' under certain properties of the step and the value down there looks suspiciously like these unique ID (that is, '" ID #randomstuff' ").  Are they all updated dynamically during execution or break something by changing these (for example if I copy a sequence of a crushing in the other version)?

  So, I have filtered the unique ID's.  The next major area of difference is that many, but not all together, VI Labview calls have a difference in the properties of the step > Flexible Labview adapter properties > ViCall > connector pane Checksum > value.  In addition, in some other cases, ViCall > error > connector number is different as well.  This indicates a different underlying VI?

  There are a few other differences, but I can interpret those.  My goal is to get a file of sequence for two machines, so the code will be easier to maintain.  I think that some of the VI with different amounts of connector pane control can be different between two facilities from one of the different hardware components required a library different driver.  This leads to a third question, what to use identical sequence files when the underlying VI may be different?  Is it just the interface must be the same?  As the connector pane has the same types of data and geometry for the presentations of the inputs and outputs?

  Thanks for any help,

  Mike

  I just got the phone with the help of NOR, so no worries on the answers.

  Short version:

  The unique ID is regenerated when a sequence is copied.

  TestStand didn't need to uninstall to reinstall an earlier version of the above.

  Connector pane Checksum involves a different underlying VI, but having the same geometry/inputs/outputs/types of connectors should allow you to have an another VI of facilities without different sequence files.

  Still awaiting support on the question of if the goto pointers updated correctly when a sequence or part of a sequence is copied.

• SLM - UDAs not available in the display Format

  Hello

  We are Oracle SLM (R12.1.3) application for our client. We define the pair of attributes defined by the user (UDA) for custom conditions. These aggregates include types also tidy and several rows. After you set the, I am able to see the ADU single-tier in search criteria and display format, but I'm not able to see the ADU several rows in the display format? Is this a bug? We are in the process of upgrading to '17525552:R12. PRC_PF. B", don't know if the ORS will correct this problem. Can anyone throw some light on this point, if they have experienced similar behavior?

  Thank you

  Nitin

  Hi Nitin,

  There is an old patch 9094148: R12. POINT OF SALE. B, but the patch 17525552: R12. PRC_PF. is the latest available and should solve the problem.

  Thank you

  Clarino

• Manually create CARS DB

  Grid Version: 11.2.0.3

  OS: RHEL 5.8

  I have correctly installed cluster (GI) and RDBMS software installed on my RAC 2 nodes. But I don't want to use dbca to create the database because of some custom conditions. Instead, I want to run the CREATE DATABASE command manually to create the DB JAR.

  As soon as the DB is created in a single node, what are the steps I need to do to ensure that this DB DB CARS?

  James_P wrote:

  Thanks Billy

  Abort DBCA after the scripts have been created.

  I hope oracle will allow me to generate the scripts without actually launch creation of DB. But this isn't the case. On the screen last dbca where you check "Generate scripts", you must press the button 'Finish' which actually initiate the creation of DB. Abandonment of the creation of the DB don't seems to be neat.

  You do not deselect the check box 'create database '.

• Customization of the LOV ranks on assignment screen

  On the screen of the assignment, we LOV ranks and when it is called I see many categories in the LOV.
  
  I wanted restrictions these qualities to responsibility level while only of grade names ending with ZNS (eg. Grade1_London_ZNS) should be visible only in the LOV.
  
  I've done the customization and the following query to create a record group called ONLY_ZNS (by creating builtin, create record query group) and try to change the LOV record group.
  
  Unfortunately for some reason its doesn't work (error FRM 41826, cannot replace the group, the columns do not match LOV) and I can see all THE available categories in the LOV, which we don't want.
  
  
  Select g.name, g.grade_id
  of per_grades g
  When trunc (sysdate) between trunc (g.date_from) and trunc (nvl(g.date_to,'31-DEC-4712'))
  and g.name like '% ZNS.
  g.name order
  
  We are on Oracle Applications: 12.1.1
  
  
  ON this Web page I've found more thing to try, but even this does NOT :-(
  
  http://oracleappstechnicalworld.blogspot.co.UK/2009/05/Oracle-Apps-changing-lov-query-form.html
  
  Salat said...
  Thank you very much, Murthy, it was exactly what we needed.
  A note - when we tried him first, we receive the error ' FRM-41826 cannot replace the Group: columns do not match LOV. This was solved by using to_char on all the number of columns in the query for the lov. Then you must alias with the original name of the column. So the query would look like: select to_char (some_number_col) some_number_col, some_text_col of...

  Hello

  Please try not to change the full query simply add your filter condition.
  For example to replace GROUP_NAME:GRADES_NO_VALID_JOB_POS
  Use under request for your condition.
  Select g.name, g.grade_id, decode (1,2,1, null) c_valid_job_flag
  decode (1,2,1, null) c_valid_position_flag
  of per_grades_vl g
  where g.business_group_id + 0 =: ctl_globals.business_group_id
  and: ctl_globals.session_date between g.date_from
  and nvl (g.date_to, to_date ('31124712', 'DDMMYYYY'))
  and (: assgt.grade_ladder_pgm_id is null)
  or (: assgt.grade_ladder_pgm_id is not null)
  and g.grade_id in
  (select pl.mapping_table_pk_id
  of ben_plip_f plip.
  ben_pl_f pl
  where plip.pgm_id =: assgt.grade_ladder_pgm_id
  and plip.business_group_id =: ctl_globals.business_group_id
  and upper (plip.plip_stat_cd) = "A".
  and: ctl_globals.session_date between plip.effective_start_date
  and plip.effective_end_date
  and pl.pl_id = plip.pl_id
  and upper (pl.mapping_table_name) = "PER_GRADES".
  and pl.business_group_id =: ctl_globals.business_group_id
  and upper (pl.pl_stat_cd) = "A".
  and: ctl_globals.session_date between pl.effective_start_date
  and pl.effective_end_date)
  )
  )
  AND g.name like '% ZNS' - added Custom Condition
  order of g.sequence

  Let me know if you need any further details.

  Kind regards
  Saurabh

• To select and insert

  Hello
  
  I am trying to insert a line to another table based on the value of the line of the select statement. Code doesn't seem to work, the pointers?
  
  declare
  maxRow integer: = 0;
  I PLS_INTEGER: = 0;
  
  Start
  -get max rank
  Select max (rownum) in the temp maxRow;
  
  -all loop to insert values from table temp2
  while I, maxRow loop
  
  Select temp.*, case when gross_qty = 0 then insert into temp2 values (i, customer, condition, 0, qty, 'true', 'false', 'false');
  end;
  temp where rownum = i;
  
  i: = i + 1; -the loop counter
  
  end loop;
  end;

  Hello

  As Someoneelse said, an SQL INSERT statement will do what you want. There is no need to use the PL/SQL.
  If you have reason to do this in PL/SQL, it will be still more efficient to use a single INSERT statement.

  You have some of the columns defined in temp3 in regards to the other columns in temp3.
  For example, you know the value of qty_used_from_client_qty before you can find the value of short and status.
  If you can't figure out how to set all columns in temp3 in terms of columns in temp1 and temp2, or if this would imply losts of nested calculations and repeated, then you can comput some columns in subqueries and use the vlues calculated in Super queries.

  The following solution uses two subqueries in this way and produces something close to what you asked:

  INSERT INTO temp3
  (     rnum
  ,     c2
  ,     status
  ,     gross_qty
  ,     qty_used_from_client_qty
  ,     extra
  ,     short
  ,     short_qty
  )
  WITH     gq     AS
  (     -- Begin sub-query gq to compute gross_qty, qty
       SELECT     NVL (t1.client,          t2.client)     AS client
       ,     NVL (t1.gross_qty,     0)          AS gross_qty
       ,     NVL (t2.qty,          0)          AS qty
       FROM               temp1     t1
       FULL OUTER JOIN          temp2     t2     ON t1.client     = t2.client
  )     -- End sub-query gq to compute gross_qty, qty
  ,     qufcq     AS
  (     -- Begin sub-query qufcq to compute qty_used_from_client_qty
       SELECT     client
       ,     gross_qty
       ,     qty
  ,     CASE
            WHEN     gross_qty     IN (0, qty)     THEN     qty
            WHEN     qty          < 0          THEN     0
            WHEN     gross_qty     < qty          THEN     gross_qty
       END          AS qty_used_from_client_qty
  ,     CASE
            WHEN     gross_qty < qty     THEN     'TRUE'
                           ELSE     'FALSE'
       END          AS extra
       FROM     gq
  )     -- End sub-query qufcq to compute qty_used_from_client_qty
  SELECT     0          -- row_num
  ,     client          -- c2
  ,     CASE
            WHEN     gross_qty               = 0     THEN     'Client Table'
            WHEN     qty_used_from_client_qty     IS NULL     THEN     'Manager Table'
                                          ELSE     'Both Tables'
       END               -- status
  ,     gross_qty
  ,     qty_used_from_client_qty
  ,     extra
  ,     CASE
            WHEN     gross_qty     >= qty_used_from_client_qty
             AND     gross_qty     != 0          THEN     'TRUE'
                                     ELSE     'FALSE'
       END               -- short
  ,     GREATEST     ( gross_qty - qty
                 , 0
                 )     -- short_qty
  FROM     qufcq;
  

  The above query produces the following results:

  .                               QTY_USED
                         GROSS_     _FROM_             SHORT
  RNUM C2  STATUS           QTY CLIENT_QTY EXTRA SHORT  _QTY
  ---- --- ------------- ------ ---------- ----- ----- -----
     0 AAA Both Tables        5          5 TRUE  TRUE      0
  
     0 AAA Both Tables        3          3 TRUE  TRUE      0
  
     0 BBB Both Tables        3          3 FALSE TRUE      0
  
     0 CCC Client Table       0          2 TRUE  FALSE     0
  
     0 YYY Manager Table      1            FALSE FALSE     1
  

  This differs from the desired output you posted in these ways:
  (a) you did not how the ROWNUM column is derived. (ROWNUM is a bad name for a column, because it is a reserved word. I used rnum instead.)
  (b) I do not see you the value qty_used_from_client_qty = 2 on the second row. According to your definitions, this column must always be either 0, temp2.qty or temp3.gross_qty, so the choices for this line should be 0, 7 and 3.
  (c) on the same line, I calculated short_qty = 0 (instead of 1, as you have it posted). This problem may be related to (b)
  (d) more often that otherwise, the additional and short columns, I calculated are are different from what you have posted.

  I don't know if I've misunderstood something, or you typed something wrong.
  If you can't find how to get the results you want, check again the sample data and the rules that you have posted.
  If there is still a gap, highlight where the query above is production of erroneous results and explain the relevant rules in a different way.

  Furthermore, you have not really to create tables temp1 and temp2 just to produce temp3. You can make temp1 and temp2 subqueries of the INSERT statement.

• HFM rule if custom dimension condition

  Hi Experts,

  I have the following requirement:

  If the Member of the Department is d6XXXX or a descendant of d6XXXX, then

  R & D Labor and benefits is equal to work and benefits

  The Department is my custom dimension. I am not able to use it in the IF condition (get the error: object doesn't support this property or method).

  I use the following Script but sound limiting to specific departments of the D6XXXX. Its doing this calc for all members

  HS = strC1. CUSTOM2. List("","D6XXXX_Base")

  For each C2Item in strC1

  HS. Exp 'a #R and Benefits.strc1 and work D = a #Labor and benefits"

  Next

  D6XXXX_Base is a list of members.

  Any help would be appreciated.

  Try this one:

  HS = C2Li. CUSTOM2. List ("D6XXXX", "[Basic]")

  For i = LBound (C2Li) to UBound (C2Li)

  HS. Exp ' #R and D Labor and Benefits.C2 # "& C2Li (i) &"= a #Labor and benefits.

  Next

  If the account of the source also has a link to C2 dimension, you must add it at the end like this:

  HS. Exp ' #R and D Labor and Benefits.C2 # "& C2Li (i) &" = a #Labor and Benefits.C2 # "& C2Li (i)

• Need help with different types of conditional logic in a custom PDF

  Oh the life of a developer - get handed something a non-geek thinks is 'easy' with an unrealistic calendar, and you've never done before :-)

  Asked me to take a PDF custom built by a member of my group and make some changes.  I am running Win7 and using Adobe Acrobat Pro DC.

  What I have to do is essentially variations around a conditional logic; for example:

  If Renseignez Checkbox1, Checkbox2 becomes locked

  If Checkbox1 is filled, ComboBox2 becomes mandatory

  If the user has completed the PDF saved as 'Customer_0123' and goes back in to make changes, may I point out what has changed?

  I'm (very very) new to JavaScript and so I was confuse through some documents, but the "most recent" document, found at Adobe is 10 years old, and I'm not sure that it is always topical.

  Any help would be appreciated...

  Thank you

  Chris

  The best way to associate scripts with boxes is to use the MouseUp event. In this case you can access the value of the new field via event.target. value.

  And Yes, it is correct re the JS Console.

• How to conditionally bind the declarative component custom ADF ADF Faces

  Hi gurus,

  I created the custom declarative component called "Historical Record", following the article of Frank Nimphus Oracle ADF Code corner: How to bind custom declarative ADF Faces components and it works perfectly find.

  But I want to strengthen further to make more generic, as in Oracle EBS we can go to all the blocks and choose Tools-> history of the record and it shows WHO columns to the currently selected record.

  The intention is conditionally bind the attributes of the component with columns of WHO bodies VO.

  The scenario is:

  * all tables have Created_Date, Modified_Date for columns of the WHO.

  * the page containing the 2 instances of VO with different source (for example:-> emp dept)

  * whenever I have navigate dept records it should display columns WHO selected dept and the same thing then to move through the records of the emp.

  Kind regards

  Ferrere

  Well as I said, you shouldn't try to rebuild the Oracle Forms technology-specific behavior in some other technologies such as ADF (because it is not usually possible).

  It is probably best to have a separate button for each shape (square to a coherent position on all pages - as some form, toolbar header...)

  If you want to rebuild the behavior of forms, then you can use the combination of af: clientListener / af:serverListener to set a flag (as the name iterator) see scope that can be used by your 'global' button to retrieve the correct data. Therefore, add af:clientListener to each component entry...

  Dario

• Conditional statements custom alarm

  All,

  I have a conditional custom alarm, I want to create. Essentially, I want to compare my current metric against a metric of 90 minutes it is a. not average... not a summary. Just what ever the metric was 90 minutes.

  That's how I imagine it would work

  If (#MyInteger 90 minutes ago # == #MyInteger #)

  The idea is that I want to confirm that there is change, the values must be the same brand of 90 minutes while we need to alarm on this.

  Hi Daniel,.

  Your syntax is almost perfect.

  This expression of the condition should work:

  return (#MyInteger 90 minutes ago # == #MyInteger #)

  'return' and the parentheses are optional.

  Kind regards

  Brian Wheeldon

• Class CSS custom to the conditional formatting

  Hello
  
  I am applying the css custom class to the conditional formatting
  like what I saw in http://gerardnico.com/wiki/dat/obiee/presentation_service/obiee_string_number_in_one_column
  
  I modified the custom.css located in C:\OracleBI\web\app\res\s_oracle10\b_mozilla_4...I added the ff:
  
  . {ClassIsLess}
  background-color: #FFFF00;
  }
  
  
  then copy pasted into C:\OracleBI\oc4j_bi\j2ee\home\applications\analytics\analytics\res\s_oracle10\b_mozilla_4
  
  Restarted the presentation service, oc4j, and erased the IE cache.
  
  When I apply it in the Style tab > custom Css section > class use CSS custom custom class works!
  
  But when I use it in a conditional formatting as if $ is not null, the custom class is NOT applied...
  
  Help, please. Am I missing something?
  
  Thank you
  Felicity

  Hey felicity.

  U have seen this?

  http://obiee101.blogspot.com/2008/09/OBIEE-custom-CSS-style-class.html

  Last three note mentioned by Jhon

  Note 1: Somehow the font size of the cell is dominant on the personal class...
  NOTE2: Disable your browser cache when developing with this... (some changes may take time to be visible).
  Note3: even if the option is available in the form of conditional formatting, it seems to work...

  Thank you
  Saichand.v