Manually create CARS DB
Grid Version: 11.2.0.3
OS: RHEL 5.8
I have correctly installed cluster (GI) and RDBMS software installed on my RAC 2 nodes. But I don't want to use dbca to create the database because of some custom conditions. Instead, I want to run the CREATE DATABASE command manually to create the DB JAR.
As soon as the DB is created in a single node, what are the steps I need to do to ensure that this DB DB CARS?
James_P wrote:
Thanks Billy
Abort DBCA after the scripts have been created.
I hope oracle will allow me to generate the scripts without actually launch creation of DB. But this isn't the case. On the screen last dbca where you check "Generate scripts", you must press the button 'Finish' which actually initiate the creation of DB. Abandonment of the creation of the DB don't seems to be neat.
You do not deselect the check box 'create database '.
Tags: Database
Similar Questions
-
Get the error when you try to manually create a restore point in Vista 32 - Bit - System - Protection of the system control panel.
Got the unable to create the specified taskHello
What is the exact error message received when the problem occurs?
Methood 1:
Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps in the following link:
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Method 2:
You can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
I suggest to put the computer in a clean boot state, and check if the problem persists, see the link:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: See step 7; Reset the computer to start as usual after troubleshooting is performed.Method 3:
You can temporarily disable the security software and check if the problem occurs. Check out the following link to do the same thing:
http://Windows.Microsoft.com/en-GB/Windows-Vista/disable-antivirus-software
Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
I hope this helps! Let us know if you need more assistance.
-
Restore points are not generate and also removed when manually created in Win 7
I am running Win7 with all available updates.
No restore point is automatically generated by the operating system.
Manually created restore points are deleted every day.
System protection IT for only c: drive.
20% (5.7 GB) assigned to the protection of the system.
Anyone has any ideas about this problem?
Thank you, Jerry
Original title: in Windows 7 Restore Points
Found this article. Definitely worth a visit:
Hope this helps you solve the problem.
-
Migration of the TMS Movi/Jabber manually created the AD users
I have a lot (75) of users created manually Movi/Jabber in TMS. When we turn to the AD authentication what is happening the old-fashioned manually created accounts? Have they disappeared? In addition, accounts created manually have the same username as their counterparts in AD. Which will cause a problem?
Thanks advance!
Douglas,
I tested in the laboratory and it does not matter the user of the AD, it gives an error.
Given that I had already 'Michael Schumacher' user added in the local database with the same login name database with AD synchronization does not matter the user and generates the error.
I use TMS PE and TMS 14.3.2
Concerning
Alok
-
creation of listener for the manually created database
Hi all
Oracle 11 g 2
RHEL 5
I have a server with a single database that is installed with the default listener listen to 1521.
Now, I'll create another data base to help create database statement. I want to have a separate listener called listener2 on port 1522. How the database manually created to listen to listerner2...
Kind regards
1 / created the database manually
Using SQLPLUS > CREATE DATABASE...
For additional info check documentation for version you use.
2 / create a new listener
USE NETCA or UPDATE YOUR LISTENER. ORA or use srvctl
For additional info check documentation for version you use.
3 / update the database using the parameter local_listener with the new name of listening port?
Using sqlplus > alter system set local_listener =
scope = <> = sid<> For additional info check documentation for version you use.
-
Manually create an instance of the DSO on 11 GR 1 material
Hallo,
I have to install MANUELLEMENT 11 GR 1 material ASM on Solaris 10, it must be smooth, but looking around metalink, there's just a note
* How to manually create an ASM Instance From Scratch [421827.1 ID] *.
It's about 10 gr 2 version.
So I wonder if there is something else:
1 - installation of CSS via the localconfig script
2 - manually create a pfile
3. manually create the ADR directory structure
Thank youis this is a stand-alone server (no cluster), then it is exactly like that.
in a clustered environment, it is better to operate the asm RAC...
-
Greetings,
I have an a6300t of Pavilion running Vista Home Premium 32 and had to replace the drive. Problem is that the owner no longer has the recovery CD that have been created when it was new. The old disk is in-tact, as well as files on the recovery partition. Is there a way I can manually recreate a set of recovery of the partition disks without executing the Recovery Manager? Since he already did once, I woudn't be able to use the RM program anyway.
Thanks in advance for any help.
If the old hard drive is still usable, you could do a picture back up and drive external hard then to restore it to the new hard drive using Macrium reflect free. It is an exact copy of what is on the old hard drive now, possibly including the recovery partition. Don't forget to create the Macrium rescue disk to restore.
http://www.Macrium.com/reflectfree.aspx
I did it many times and works very well.
-
How to manually create another resolution of the screen?
How can I create another resolution of the screen manually which is not available in Windows 7?
I recently installed Windows 7 Professional 64-bit with 1 package of Service on my MacBook Pro 17' via bootcamp.
I want to create a screen resolution 1680 x 1050 because of 17' manually but am not able to do. Hight resolution proposed is only 1600 x 1200 and the results are signs and distorted images.
How to change the screen resolution correctly? Updates Windows (more than 200) that are not installed so far for it takes very long time will help?
Do I have to install an additional specific driver?
I did two things both of samt: I installed all Windows updates and I've updated the PnP Monitor driver. After a new start in Windows 7, the screen resolution was automatically correct (1920 x 1200).
-
Manually create a disk logic/extended partition
So I would like to create a partition/logic extened manually reader but Win7 disk management doesn't have the possibility to let me do... I do 3 primart then it auto is a partition/logic extened drive, which I don't want, I want to do a partition/logical drive extened before 3 other partitions because I want too be able to resize partitions, I intend to do so with ease.
Use the diskpart utility in an elevated command prompt window. The command will look something like this:
C:\Users\yourname > diskpart
DISKPART > select disk 0
DISKPART > create extended partition
DISKPART > create partition logical
Help on a command, type its name in the help command. For example:DISKPART > create partition
DISKPART > create partition logical -
Manually creating a tabular presentation
I'm trying to create an apex manually in form of table 5.
I created a region and made in the form of arrays of type
in the source, I gave the SQL with apex_item
But no html content are the components of apex_item get returned. I see html in the user interface
How can I fix? Help, please
Thank you
Hello
I guess that your column type is set to "plain text". By default, who type the special escape characters. Change the attribute "Special escape characters" (security) on No to escape no HTML tags.
Concerning
Patrick
Member of the APEX development team
-
Export to CSV from a form of manually created tab
Version 4.1.1.00.23
Hello
I have seen a lot of messages about the present, and of course, I do not find anything!
So, I have a form tab created manually, built using the API APEX_ITEM and Collections and now demand came to allow the report to export in CSV and activation of export, I get all the values that are in the list select etc..
How can I get the export of the recovered data in the report?
Thank you
Joe
Fixed.
-
Manually created the report runs is not on weblayout
Hello
I've created a report manually the 10g report, that the report runs on layout paper but when I try to run the report even using the button run on the Report Builder displays blank page any idea which must be defined with a manual report to run it on the web. I saved the report as JSP and rdf, but the two produced no out put.Hello
The layout web (in other words, the web source) is mainly used for the format .jsp for more flexibility via the web for web developers using Oracle reports.
Only reports created in Report Builder 9i or higher using the report wizard and choosing "Create Web Layout only" or "create of Web and paper Layout.
contains a code Source base of 'Web' which is the source for the web page layout. In 9i reports, reports created manually: without using the
Report Wizard - will also have a blank web page layout, unless you add your own code in the Source of "Web". Moreover, you will not have a web layout for all
reports migrated from reports 6i like web layouts have been introduced only in reports 9i. What the report is not in an earlier version or version is not
will be generated in the new version or version.You will need to add your own code to the 'Web Source"so that whatever it is, to display in the web page layout. In addition, changes made to the
Print layout will cross to the Web layout by confirmation with the development. You can use the rw: include the tag in the Web Source (see Help)
to get some of the print layout in your web page layout.Alternatively, you can still perform the following with reports Oracle 9i or higher and the RDF to view the layout of document on the web you have
in the past with Oracle Reports 6i: http//webserver.domain:7779/reports/rwservlet?report=test.rdf&destype=cache&desformat=pdf&userid=scott/tiger@dbI hope this helps.
Kind regards
AlexIf someone useful or appropriate please mark accordingly.
-
How to manually create the matrix object?
Hello expert, I'm creating a matrix report object manually, I found a few steps on google, but they do not work to success.
Please help me to create a.
Google as follows:
To create a matrix object:
1.
The layout of the document view, click the tool framework to repeat in the tool palette, and then drag a rectangle to create an extensible framework.
2.
In the property inspector, frame repeating, set the Source property of the "column" for the matrix and set the property to print the down Direction.
3.
Again click the tool framework to repeat in the Toolbox, and then drag a rectangle to create a second frame stretch, intersecting the first extensible frame.
4.
In the property inspector, frame repeating, set the Source property of the 'line' of the matrix and set the Direction of printing throughout property.
5.
Drag a rectangle around two expandable chassis to select, and then choose Insert > layout matrix.
This creates a matrix object that represents the intersection of two Extensible frameworks. For example:
Figure 4-1 example matrix object
Shows the intersection of two rectangles
Description of the "object of Figure 4-1 example matrix"
6.
Double-click the matrix object to set its properties.
Thank you best regards n
YoannHello
You must select the two images (ctrl + click on the two fields) before you choose Insert > layout matrix.
It should work.Kind regards
Alex -
Port number for a manually created database
Hi all
I have an original database installed using the installer regular Oracle on the default port 1521.
Then I created the PeopleSoft database by using create database command. I aksed never of port number in this manual steps. Now, im in the process of setting up Enterprise Manager, here I need to enter the port number. IM wondering would it be same as initial database 1521... or? where can I see this information.
Thanks in advance.RamaN says:
Hi allI have an original database installed using the installer regular Oracle on the default port 1521.
Then I created the PeopleSoft database by using create database command. I aksed never of port number in this manual steps. Now, im in the process of setting up Enterprise Manager, here I need to enter the port number. IM wondering would it be same as initial database 1521... or? where can I see this information.Raman,
I think that there is a confusion of a lot of time that you are experiencing. First of all, 1521 is not the port number of the EM (its not supposed to be) but for the listener . So don't really use you it for something else, and just for the listener, and there is a single earpiece only which should be enough for all of the databases, you have. For the initial data, the default port for the EM, is 1158. This can vary according to the configuration you have. There is a file that is created and stores all the ports used in the parties initials, portlist.ini . It would be in your ORacle home. You can see the port number used by the MS of the initial database from there. For the manual creation of the MA, Oracle will ask you the port number for the listener, not where it must run the MS. If you enter 1521 only.
HTH
Aman... -
Question about Enterprise Manager for a manually created database
DB versions: 10 gr 2, 11g
I will create 10 gr 2, database 11G manually (without using DBCA). Enterprise manager be installed automatically if I use the CREATE DATABASE command like
create database "mnprod" user sys identified by mnsys user system identified by mnsys logfile group 1 ( '/u02/oradata/redologs/ora238_redo1a.log', . . . .
Enterprise manager be installed automatically if I use the CREATE DATABASE command like
No, you need to expilicity create "oem" repository 'DBCA' or 'EMCA '.Kind regards
Taj
Maybe you are looking for
-
Satellite U300-14Z - no sound after installing WIn7
Hello!I have the problem (series Satellite PSU30E) next: laptop computer was Windows XP, who suddenly "fallen" and again once it has not issued (as explained by problem SATA drivers). I installed Windows 7 64 bit, but after installing it turned out t
-
HP Pavillion TS-abc253ca: how much RAM can I develop for? HP Pavillion TS-abc243ca
I tried to look around the site of HP to see how much RAM can I add to my computer, but the documentation for the specification leaves me with a blank page. I bought the laptop in a store that does not specify the maximum amount of RAM it can extend
-
Satellite P300D-14F - 2 x beeps at startup
Hi all I changed nothing on my laptop, but I hear for three days * 2 short beep tones * and receive the output on the screen during the next boot: Phoenix TrustedCore... CPU = AMD Turion...ATAPI CD-ROM:...Fixed disk 0: TOSHIBA...Disk 1: TOSHIBA...Ini
-
Trying to download SP1 but the only available Sp1 is for network systems. I need to be able to install the latest ZoneAlarm update. Available SP1 is regarded as too large for a single computer. Should I download it anyway?
-
My computer is a desktop pc. HP Media center PC, model #370n. I am running version 2002 SP3 windows xp media center. My browser is IE8. I connect to the internet via a broadband always enabled, connection of the century link. (Actiontec PK5000) If th