Custom form control, limits the size of the box

Similar Questions

• Custom form to change the password

  Is it possible to create a custom form to allow users to change their password?
  
  Something like:
  
  Current PW:
  New PW:
  Check again PW:
  
  I know that I can use APEX_UTIL. CHANGE_CURRENT_USER_PW to change the password but how do I check the current PW?
  
  Thank you
  Mark

  You can ask an area secured with the old passage ahd cjheck
  function is_login_password_valid)
  --
  -Checks the table of wwv_flow_fnd_users to see if
  -name of user/password combo is valid within the current workspace (control security_group_id)
  --
  p_username in varchar2 default null,
  p_password in varchar2 default null)
  return a Boolean value
  ;

  of htmldb_util

• I don't want to use privacy > history bookmarks open tabs. I uncheck. Firefox restarts, the controls in the boxes to return. How can I keep their unchecked?

  I don't want to use the bookmark, history, the functionality of the tab opened under Privacy Options. I uncheck the boxes. Firefox restarts, boxes of return that verified. How can I avoid these selection options? Thank you.

  Is - this unique setting that gets changed back?

  Note that it is the browser.urlbar.suggest.openpage preference.

  • http://KB.mozillazine.org/about:config
  • Browser.urlbar.Suggest.History
  • browser.urlbar.suggest.history.onlyTyped
  • Browser.urlbar.Suggest.Bookmark
  • Browser.urlbar.Suggest.OpenPage

• Control / limiting the use of the processor

  Operating system is Windows XP PRO with SP3 installed; specific computer is HP 8100 Elite w / Intel I5 VPRO processor; 4 GB OF RAM.

  Are there options in Windows XP PRO, where the user can specify 'how' CPU usage is allowed, either by individual program or total usage?

  If so, where they are updated?

  I looked into different parts of logic; and can not find a way to do this.

  Thanks in advance for comments and suggestions.

  The use of the processor of the computer never seems to be "maximized" (rarely exceeds 30-50%) and I wonder if some setting somewhere preventing this use.

  I ran MalwareBytes, SuperAntiSpyware, and ESET. and no malicious software is present.

  Another thing to consider is that if you have a quad or a dual-core CPU, a single task tends to operate on only one heart.  So if it takes 100% of the CPU on one of four cores, the CPU meter will result in a reading of 25%, assuming that the other cores are idle.

  Instead of the Windows Task Manager, you might want to try [freeware] Process Explorer.  It gives you much more information on what is happening in your computer.  Once you use it, you will never return to the Task Manager.

  Process Explorer: <> http://technet.microsoft.com/en-us/sysinternals/bb896653.aspx >

  HTH,
  JW

• How can I save the shapes I made to custom forms?

  Hi using Lasso, I created a good overcome that I need in my work. so I want to save this form that I drew in some custom shapes so that I can use this later in my future now also works. How to get there? Thanks in advance.

  Hello, do right click inside your choice, select "make path of work", and then click edit > define custom shape... It will now be available to be reused immediately.

  To make sure that it is registered permanently, go to edit > Presets > manager presets, change the dropdown for custom forms, target of the new form, and click on save set...

• Doubt on creation of custom form

  Hi all, I am new to Oracle Applications.I would like to know why we need a template.fmb for creating a form customized?
  any help is appreciated
  
  Thanks in advance!
  
  Published by: sand on Sep 20, 2011 10:02

  Sandy,
  The MODEL. FMB is used to ensure you EBS Custom form has all the minimum requirements of EBS framework included in your form. Develop a form for the Enterprise Business Suite (EBS) is not the same as the development of a stand-alone application forms. This is why there is a separate forum (Discussion of EBS) dedicated to the development of forms of BSE.

  As you are new to the development of forms of BSE, I recommend that consult you the library of Documentation of Oracle Applications . This library explains the use of the TEMPLATE.fmb and the APPSTAND.fmb and related forms libraries that are needed in all forms of EBS Custom. Just select your EBS version and then scroll to the section of the standards and review the following documents:
  

  
  
  • The Oracle Applications Developer's Guide
    
  • Oracle Applications Interface standards user for forms-based products
    
  • Oracle Application Framework Customization Guide
    
  
  Hope this helps,
  Craig B-)

  If someone useful or appropriate, please mark accordingly.

• How to pass parameters to form Standard of Apps to a Custom Form

  Hi all
  
  I am using oracle apps R12
  
  I work in the Po
  
  I created a custom form attached on the special menu.
  
  When we sail in. - request summary - when you click search it will display the summary request header, and when we click lines it shows lines summaries.
  
  
  In their query first form summary field lines is number-(requisition number). Now I open my form custom from the Tools menu, then the number field to requisition summary lines is to say no requisition number to pass to the custom form.
  
  Can someone give me please the steps to do this.
  
  Concerning
  Srikkanth
  
  Published by: Srikkanth.M on August 18, 2011 10:51

  You do this using global variables.
  You set the global variable in the form of call.
  And then you use the global variable in the form called.

  All this can be done by using customizations.

  See http://erpschools.com/articles/forms-personalization-tutorial for a guide step by step.

  Hope this helps,
  Sandeep Gandhi

• Question about the boxes and enters the information

  I am runing a form which takes the boxes of a query.  They have the same name, but different values.

  On the action page, for each check box selected, a new record must be created in the db.

  IM' sure this has to do with counting and defining a number of loop, but for some reason, I paint a white.

  The query is the basis...

  < cfquery = "whatever" datasource = dbname name # >

  insert into ach_world_done

  (id, scoutid, den, world)

  Values

  (' #url.id #',' #url.scoutid #',' #url.den #',' #form.world # ')

  < / cfquery >

  As it is written now, it conmas the check boxes on the previous page, so if there are two boxes checked, it makes info1, info2 and this puts in the db.  I need to break it up.

  any help would be greatly appreciated.

  Sharon

  www.smdscouts.com

  On the page of the form, type a unique name to each checkbox:

  
            
             
             
              (X #dateformat(doh.datereceived,'mm/dd/yy') #.
  

  On the action page, count the number of checkboxes. Remember that ColdFusion submit check boxes unchecked.
  
  
     
         
     
  

• Programmatically set the size of a table control (not the number of col and lines)

  Hi all

  I am trying to create a little VI, in which the user selects the number of columns and rows in a table, and after clicking on a button 'OK', the table control is displayed in the control panel (to be filled in by the user). To do this, I use the nodes property to the number of columns and lines. I have no problem with that.

  However, I want to "limit" the size of the control table (control of himself, not the dimensions of the table) and make use of vertical and horizontal table, the scroll bars. I want to avoid it is that passes type 100 user and 100 lines and appears a huge table control.

  I could tho this by using an array instead of an array, via the node property "size", but I would use an insead table a table.

  Thank you very much

  Daniel

  With a table control, you cannot set the display size to be anything other than a multiple of a complete cell.

  If you are limited to a number of lines and columns.  If you want to resize with more control you also need to resize the control within the Bay, accessible via the property 'picture Element '.

  Another option (but seems huge exaggerated) is to place your table in a secondary and set the size of the secondary to the size you need and enable scrollbars for her.  It is not an option that I would choose but if it helps...

  Have it, your description of your user interface sounds not very intuitive.  How the user knows at any time exactly what cell they access if they have to scroll backwards?

• deploy from model with the custom form does not not - NIC becomes disconnected

  [We're using vcenter 5.1 update 2]

  I have created a new model for 2012 Server R2 and I created a specification tailored to go with it. I went to test the deployment of the other day and it seemed that the personalised has not quite finished. He had put the local administrator password and baptized, but he does not join the domain. I finally understood that after the deployment, the NETWORK adapter is not connected despite having me 'connect to light' checked in the model. We are using the VMXNET 3 card.

  I've been messing around with the template for the past 2 days and I am stuck as to why it does not work. I tried the following...

  -checked the windows firewall is disabled (3 options) (Re: ESXi 5 VM / Server 2008 R2 loses the network connection after reboot)

  -removed NIC; cleaned up the registry to the HKLM\System\CurrentControlSet\Control\Network\; restarted; readded NIC (it was to eliminate any ghost NICs) (http://vnetwise.wordpress.com/2012/06/09/vmware-template-deploymentspart-1-trying-to-modify/)

  -Remove vmware tools and reinstall. (http://vnetwise.wordpress.com/2012/06/09/vmware-template-deploymentspart-1-trying-to-modify/)

  -card network in the operating system, unchecked "allow the computer to turn off to save energy" (Re: ESXi 5 VM / Server 2008 R2 loses the network connection after reboot)

  -checked that my new 2012R2 model uses the same host cluster and storage as my 2012 model that works. Also on the same port group distributed. (Essentially, all parameters of vcenter are identical between the two models)

  -also tried disabling the NETWORK card in the model (Windows Server 2012 comments customization)

  I have re-deployed the same server about 10 times and each time after deployment, you can see restart and try starting the customization but it crashes. If I manually turn the NIC on it is completed successfully. The problem is that I don't want to have to do that each time I deploy a server. Why is it disable the NIC and unchecking my option to connect to turn on and how to fix this?

  6.23.2014

  Based on tests (as detailed below):

  5.1 U2 - when patterns of deployment Server R2 2012 using a custom form, the NIC is not on after the deployment despite having ' connect at power on "checked.

  * We use VMXNET 3 and we use vDS

  
  

  Any help is very appreciated!

  -Adam

  Post edited by: atom_acres

  Problem solved: you need to update the hardware VM version from 8 to 9 on the template (also be sure to check "running on check and put vmtools")

  When you create a new virtual machine from scratch in 5.1 U2, he apparently uses VM Hardware version 8 instead of the latest v9. Once I upgraded it, made sure to check the box to have check and tools upgrade vm market, deploying with customization works and the NETWORK adapter is enabled when lit!

• Limiting the URL of the Image (MySQL field) to a certain area/size

  Hello

  I have a database that contains a "Image URL" field for people to grab an image from the internet to the given equipment.

  The problem is that the images are all sorts of different sizes, and when it is displayed on the site, there may be an image that filled the entire page!

  I have the 'Image' of the Forms tab field in Dreamweaver, and it is the display of images. (As shown below):

  

  For the moment, the image is so large, it overwrites all the text on one side.

  Is there a way for images to be limited and fill in a certain area?

  Here is a picture of what I mean. (Modified image)

  

  Any help would be much appreciated!

  Thanks for the reply.

  I fixed it by creating a

  tag and instead to insert the form 'Field of the Image' I walked inot the mode of creation, while still in Code view. It grew up a different window with many more parameters for the image. Here I placed the desired height and the source of the image.

  Thank you very much for your help!

• How to configure the form control

  I created my first site of BC, and need help. I use the default form, Check Out, which seems to be created dynamically because I do not see in my list of 'Pages '. I only have the standard gateway of PayPal, so I need to:

  1. block the choice of credit card, PayPal (etc.) for only PayPal

  2. reduce the choice of fields to the value default PayPal (will happen this automatically?)

  3. make the required address field so I can send a physical receipt.

  Does anyone know how to do this? I've been searching for centuries in the region of forms, without success.

  Thank you

  Greg

  To change the form control you go to Site Manager > Module models > Online Shop Layouts > registration - buy. Then simply delete or comment out payment types, you do not want to provide. A bit of html knowledge will be necessary here.

  In regards to address my billing address is automatically required. To use the address of the home for shipping and make it necessary, simply navigate to Site Manager > Web Forms > select online store purchase (if you have not created a custom form). Add address and make it necessary.

• Add custom controls in the Rich text editor

  Hi all
  
  Request help where I am doing wrong,
  
  I try to add a new control in the rich text editor toolbar. What I realized is this can be done by creating a new side with the name 'customXYX' and include it in the toolboxLayout = "customXYX historical fonts ', which now displays the facet of customXYZ on the toolbar.
  
  Here is my code:_
  
  RTE. JSFF
  
  + <? XML version = "1.0" encoding = "UTF - 8"? > +.
  + < jsp:root xmlns:jsp = "http://java.sun.com/JSP/Page" version = "2.1 +.
  xmlns:af = "http://xmlns.oracle.com/adf/faces/rich".
  xmlns:f = "http://java.sun.com/jsf/core".
  xmlns:h = "http://java.sun.com/jsf/html" >
  + < f: facet name = "customXYZ" > +.
  + < h:panelGroup id = "pg1" > +.
  + < af:outputText value = "outputText1" id = "ot1" / > +.
  + < / h:panelGroup > +.
  + < / f: facet > +.
  + < af:richTextEditor toolboxLayout = "customXYZ history of fonts" label = "Label 1" id = 'rte1 ' +.
  + value = "#{rteBean.rteText}" / > +.
  + < / jsp:root > +.
  
  
  
  
  * RTE. JSPX * (here I added my taskflow which consist of my fragment above is added as a region)
  
  + < jsp:root xmlns:jsp = "http://java.sun.com/JSP/Page" version = "2.1 +.
  + xmlns:f = "http://java.sun.com/jsf/core" +.
  + xmlns:h = "http://java.sun.com/jsf/html" +.
  + xmlns:af = "http://xmlns.oracle.com/adf/faces/rich" > +.
  + < jsp:directive.page contentType = text/html"; Charset = UTF - 8 "/ > +.
  + < f: view > +.
  
  + < af:document title = 'RTE Image View' id = 'd1' > +.
  + < af:form id = "f1" > +.
  + < af:region value = "#{bindings.rtetf1.regionModel}" id = "r1" / > + "
  + < / af:form > +.
  + < / af:document > +.
  + < / f: view > +.
  + < / jsp:root > +.
  
  
  When I try to run it, I get an error saying:
  * < SimpleRichTextEditorRenderer > < _encodeToolboxLayoutToolbar > cannot find the part corresponding to the custom calendar toolboxLayout value customXYZ.*
  
  
  Please let me know what I'm doing wrong.
  
  Thank you
  Ashwin

  Hello

  try to create the facet as a child of the RichText component and not a child fo the page fragment

  Frank

• custom control with the mask of the image

  Hello

  I am trying to create a custom control that looks like a bulb. I want to do is have a picture of a light bulb with a Boolean flag behind it so when you press a button the light bulb gets dimmer or brighter. I know how to customize the controls and can change the color of the Boolean indicator but have no idea how to do it. Any help would be grateful.

  See you soon

  James

  GIF will allow transparency.  This will show through the image.

  Also, few throughts.  Change the box color instead of a Boolean, this event will allow you to change just the color instead of use the Boolean color via a property node.

  Another easy method is to use a ring to the bottom of the picture load the image of your bulb, fill the bulb with several shades (May 16) brightness, then import the sequence into an image control, then you will have multiple shades you can view any required customizations.

• The Custom Toolbar control ring question

  Hello.  It is probably a stupid question, but how do I add items to a ring (kRing) toolbar item when you use the toolbar Custom Control (toolbar.fp) in CVI 2010?  Thank you.

  You can add your items first, get the ID of the control to the item toolbar via the functions Toolbar_GetCtrlFromIndex or Toolbar_GetCtrlFromDescription, then using InsertListItem to add your items to the ring.

  Luis