Card PCI of USB 3 on desktop P6-2018

Similar Questions

• What card PCI adapter USB can I use on my Satellite C

  Hello

  My USB port of remaining work has now passed away, and I'm stuck because I can't print longer (especially children can not print their homework!) I discovered recently the understanding that I can get either the replaced motherboard (expensive so not an option!) or get a * card with USB ports * on what goes into the card reader at the front of the laptop?

  No one knows exactly what I buy as all this seems quite complicated for me!

  Any help would be greatly appreciated! Thank you, Kerry.

  Hi Kerry

  Can you tell us more about your Toshiba laptop?
  What model do you have?
  Have you tested the functionality of all USB ports?
  How old is your laptop?
  I want to say if the warranty is still valid contact the nearest Toshiba service and ask for help?

  You have a new printer with WLAN indoors. If so, you can print using the WLAN connection.

• What type of card PCI USB should I get for a PowerMac G3 1997?

  I have a 1997 beige PowerMac G3, running system 9.2... I bought a USB PCI card to the computer, because it has not taken USB, but the operating system supports the. The description of the article says ICP should work for G3 G5 PowerMacs, but from what I've heard, it is quite a bit of difference between beige PowerMac G3 of 97 and the blue and white of 99. The eBay listing didn't say anything either, only that the product is supposed to run on a PowerMac G3, which, in all technicality, I.

  So I bought and installed, this is where things went sour. The PowerMac has 3 PCI slots, and before you buy this card, I got a card for mini SCSI in the Central slot, which was actively working. As soon as the first installation of the USB PCI card (and by installing, I mean open the computer and plug on the motherboard), once the computer was back together again, he did that freeze the computer, and it would not start, only to turn and sit with the black screen.

  Now, I had put the card in the slot below the SCSI Mini card and after trying to plug into the slot above the mini SCSI card, which only lead to the same result. So I then took the SCSI mini and put the USB PCI card into the Central slot. This time the computer is power up, but does not recognize my flash drive when plugged into the new USB card. I tried a USB and optical laser mouse light up, but the computer has not responded. And audit under the system of Apple, I noticed the card USB PCI did not appear in the material, while the SCSI card mini had done before.

  I think that the computer with a PCI card in a location any of freezing in the Middle may be a quirk of this old computer, but I don't think that I use the bad PCI card for the machine, and I don't want to shoot trouble more as taking the computer outside whenever it freezes become tedious.

  If someone could shed some light on this situation and direct me in the right direction to find something to put USB on my PowerMac, that would be greatly appreciated.

  Thank you

  Aidyn

  What company manufactured the chip USB controller on the card (not the brand of card)?  You may need to take off a sticker to read the name.  Is it VIA or Opti?  These maps have been problematic for the beige G3s and could cause the gel.  I have had success with a card from IOGEAR USB 2.0 2-port in my fleet of beige G3s, which I attribute to them have a controller NEC chip.

• My SD card reader and USB 3.0 Hub have left both answer but see the place in the information system. How can I make them work again?

  On my Macbook Pro 13 inch Core I5 2 .6GHz, I just noticed that my SD card reader and USB ports have stopped working. They hub and drive appear in the information of the reporting system. I tried to reset PRAM and SMC but no luck so far and my Time Machine backup is on a SSD in a USB 3.0 hard drive enclosure. Any ideas how to reset the hub and the reader? I'm including all system information in case it is useful

  System information:

  Model name: MacBook Pro

  Model identifier: MacBookPro11, 1

  Processor name: Intel Core i5

  Processor speed: 2.6 GHz

  Number of processors: 1

  Total number of cores: 2

  (By heart) L2 Cache: 256 KB

  L3 Cache: 3 MB

  Memory: 8 GB

  Boot ROM Version: MBP111.0138.B17

  : 2.16f68 SCM Version (system)

  USB:

  USB 3.0 Bus:

  Host Controller Driver: AppleUSBXHCILPT

  PCI Device ID:0x9c31

  PCI revision ID:0 x 0004

  The seller ID:0 x 8086 PCI

  Mass storage device:

  Product ID:0 x 1000

  Provider ID:0 8564 x

  Version: 11 h 00

  Serial number: 45H3PTDPV3XSLHKB

  Speed: up to 5 GB/s

  Manufacturer: JetFlash

  Location ID:0 x 14500000 / 9

  Available current (mA): 1800

  Current (mA): 76

  Additional operating current (mA): 0

  Apple keyboard / Trackpad:

  Product ID:0 x 0259

  ID:0x05ac of the seller (Apple Inc.)

  Version: 2.24

  Speed: up to 12 Mb/s

  Manufacturer: Apple Inc..

  Location ID:0 x 14400000 / 2

  Available current (mA): 1000

  Current (mA): 40

  Additional operating current (mA): 0

  Built-In: Yes

  BRCM20702 Hub:

  Product ID:0 x 4500

  Name of the vendor ID:0x0a5c (Broadcom Corp.)

  Version: 1.00

  Speed: up to 12 Mb/s

  Manufacturer: Apple Inc..

  Location ID:0 x 14300000 / 3

  Available current (mA): 1000

  Current (mA): 94

  Additional operating current (mA): 0

  Built-In: Yes

  Host controller USB Bluetooth:

  Product ID:0 x 8289

  ID:0x05ac of the seller (Apple Inc.)

  Version: 1.18

  Speed: up to 12 Mb/s

  Manufacturer: Apple Inc..

  Location ID:0 x 14330000 / 6

  Available current (mA): 1000

  Current (mA): 0

  Additional operating current (mA): 0

  Built-In: Yes

  Software:

  Presentation of the system software:

  System Version: OS X 10.11.5 (15F34)

  Kernel version: Darwin 15.5.0

  Volume: Macintosh HD to startup

  Boot Mode: Normal

  MacBook Pro name: Stuart computer

  User name: Stuart Berwick

  Ensure the virtual memory: enabled

  Integrity of system protection: enabled

  Since the starting time: 6 minutes

  USB 3.0 Bus:

  Manufacturer: Apple Inc..

  Location ID: 0 x 14330000 / 6

  Available current (mA): 1000

  Current (mA): 0

  Additional operating current (mA): 0

  Integrated: Yes

  Model name: MacBook P

  A simple restart of the machine is reset.

  On the hub to try another cable and a different port if possible.

  The SD is constructed in the?  It can be a bit fussy, Reseat the card with a purpose, repeatedly if necessary so that it can recognize it.

• PCI vs USB adapters

  Just bought and installed a new router E2500. I must now get an adapter for my other pc. Is there an advantage to use a PCI adapter vs a USB adapter (or vice versa)?

  of course, you wouldn't be able to use a PCI adapter on a regular desktop computer. the advantage of this is that it is inside the tower PC itself if you save space. the advantage of using a USB adapter, however, is that it is portable - you can use the adapter on different computers. just unplug it, then put it on another PC/laptop.

• Installation of a card PCI-Express for e-SATA Support Ports?

  Hello Experts,

  I would buy a card PCI-Express to Support 2 x e-SATA Port. The card can only installed in a PCI-Express Slot Interface. Windows Vista Ultimate German, 32-bit Version with SP1, real drivers and patches on my XPS PC.

  I'm not sure, that the card can be installed on my XPS 720 desktop computer.

  Currently work driving my Seagate FreeAgent Pro on the IEE1394 (e.g. Firewire) Port, but the speed is currently very poor.

  Sorry for my bad English, I live in Germany... ;)

  For more Questions for me - thanks to all the experts here...

  
  

• Standard (non-express) - card PCI Passthrough/VMDirectPath broken in ESXi 5.5?

  Hello

  I use VMDirectPath/PCI passthrough with 2 cards in an ESXi 5 host environment:

  -The first card is a standard-PCI (not express), a "AVM B1 ISDN-Controller.

  -The second is a card PCIe, a "Renesas USB 3.0 controller"

  The two cards passthrough'ed work correctly with ESXi 5.0 for a long time...

  After an upgrade to ESXi 5.5, the relay of the card to the PCI standard is no longer in effect:

  -Two cards are listed very well as passthrough devices ' ed in the vSphere client

  -Two cards are configured with "msiEnabled = FALSE" in the virtual machine, no error occur at power to the top of the virtual machine

  -Two cards are listed without errors in the Device Manager of Windows Server 2003 in the VM - no exclamation point appears

  -L'USB 3.0 controller works fine, devices are recognized and are accessible

  - But, the driver for the PCI ISDN card indicates an error in the Event Viewer system log in the Windows virtual machine: "the card can not be found" and the map does not work

  After re - install of the 'old' ESXi 5.0 and restore a backup of the configuration, all works fine again.

  A ' cat vmware.log | grep-i CPPI"VM file log shows no relevant difference regarding PCI passthrough between ESXi 5.0 and 5.5.

  No idea what changed in ESXi 5.5 compared to 5.0 in PCI card passthrough/VMDirectPath ESXi?

  Thank you

  Message geändert durch MatthiasSchmidt

  The card works fine now with the recent update ESXi 5.5 2!

• I have a Mid-2010 Mac Pro Tower running OS Yosemite to which I would like to connect a Tower (G-Technology) G-Speed Q RAID via eSATA connection.  What type of card PCIe eSATA should I install in my Mac Pro tower to enable such a connection?

  I have a Mid-2010 Mac Pro Tower running OS Yosemite to which I would like to connect a Tower (G-Technology) G-Speed Q RAID via eSATA connection.  What type of card PCIe eSATA should I install in my Mac Pro tower to enable such a connection?

  https://eShop.MacSales.com/item/NewerTech/MXPCIE2E2U3/

  https://eShop.MacSales.com/item/NewerTech/MXPCIE6G2S2/

  https://eShop.MacSales.com/item/NewerTech/MXPCIE6GRS4E/

  https://eShop.MacSales.com/item/sonnet%20Technologies/TSATA6PROE2/

• I am looking for a card PCI UMTS for Portege M700

  First of all Hi everyone, as above mentioned in the title is on the Portege M700, I am looking for a card PCI UMTS for this model have here an 8775 Sierra lying around, but unfortunately, it is not recognized in Win7, I can time can someone tell what card for this laptop is, or even something where I could get so...?

  Thank you apologize in advance

  Hello

  You need a module 3G Broadband?

  As far as I know that some of the Portege M700 series were equipped with the 3G module I think that it s of Novatel but I m not sure leave

  However, if you need a framework for the Toshiba notebook that would be consistent for sure, the best place for the purchase of these parts is your ASP.

  Guys could check what parts are compatible and could order from Toshiba if that would be really necessary

  Welcome them

• Satellite Pro L20 - what card PCI I need?

  I have a Sat Pro L20 (model PSL2YE-00J005EN). What card PCI I need a Wi - Fi connection? They all seem to be 32-bit cards but my manual says that I have a 16-bit location.

  Hello

  I visit the site Web of Toshiba accessories and I found information that a unit is always the wireless card. Have you checked in the Device Manager if there is a wireless card?
  Unfortunately, I don t have found a part exactly compatible wireless card number but if you want to order a so I recommend you contact Toshiba service partner. Here, you can order the miniPCI card that is 100% compatible with your device.

• Noise measurement of an accelerometer with card PCI-4461

  Hello world

  I'm trying to measure the noise of an accelerometer, except with a card PCI-4461.

  First of all, I measured manually this noise with the help of a HP35665 signal Analyzer. I get something like this:

  

  And now with LabView and the PCI-4461 map, I get this:

  

  My question is: Whence this part? And how to remove it? (Since there is no with the signal Analyzer)

  

  I'm using LabView 8.5.

  This is how I configured the DAQ acquisition:

  

  and it's my VI:

  

  Thank you in advance for help

  Arthur

  
  

• Several cards PCI-MIO-16-4 in a PC

  Hello

  I have two systems on the same SCXI, using a card PCI-MIO-16-4 to control instruments in a chassis.  Currently, I am working on the new software to combine these two systems in one, but without any hardware revisions.  Because of the distance between the two chassis, I don't have the ability to chain the.  Is it possible to use both PCI-MIO-16-4 cards in a PC at the same time?  Thank you very much for your help!

  -Eric

  Hi Eric,.

  Assuming that you have available PCI slots in your computer, you can use two cards PCI-MIO-16-4 in a computer simulatneously.

  -Jake B.

• How to change the configuration of the BIOS with NO SIGNAL - to accept the new card PCI - ex

  Compaq Presario SR2030NX

  Product #RJ036AA

  S/N {removed privacy}

  MB: ASUS A8M2N - LA

  Bought: October 2006

  OS: Windows XP Media Center 05

  New graphics card: MSI N210-D512D2 graphics card GeForce 210-512 MB, DDR2, PCI-Express 2.0 (x 16), 1 x DVI, 1 x VGA, DirectX 10.1, mono-emplacement

  New: 480w PSU

  ERROR:  NO SIGNAL on monitor and can not reset the BIOS to accept the new video card in the PCI slot

  PROBLEM: The user reports the monitor suddenly became white with blue lines finally erased.   On start-up, the screen shows "No Signal" then turns off.

  Troubleshooting has included:

  Fixing monitor with its cable to another PC - monitor work

  Fixing working monitor and cable to the PC - No Signal

  There is no boot beeps, fans, lamps, not work cable defeated, no video.   I concluded the embedded video component failed.

  Installed the new video PCI - ex card and new power supply 480w and still get NO SIGNAL.   New video card specifications called for a minimum 350w power supply.  The fan on the new video card PCI - ex works.  Search on the HP Support pages indicates that the BIOS should be modified to change the type of PCI slot type in-flight video.  Makes perfect sense to me, sounds like it might work.

  How to reset the BIOS when you do not see what you are doing?

  I have moved the jumpers to reset the CMOS, but cannot tell if it worked or not.  I tried a couple blind BIOS resets, but I could do this for months.

  If I could determine the Version of the BIOS, I might be able to blindly to reset the BIOS.  The Compaq Options of Menu and "BIOS Setup Utility information" web page provides instructions for BIOS version 6 or less and version 7 and greater - menus and access steps are very different.

  QUESTIONS:   How to determine the version of the BIOS.  Which key I hit to access the BIOS (F1, F10, esc, Del)?  Which menu I followed to reset the type of video, so how can I save and exit?

  

  Thanks for any help

  GJB

  Thank you Paul,.

  I didn't know that it was just a function of Regedit - piece of cake.

• How to read digital signals with pre-and post-trigger on a card PCI-6251

  I have 22-bit parallel position of data entering TTL lines to 16 kHz with a pulse of marker that says when the data is valid. I also have a fault line which gives an impulse when an error condition is met. I want to read in the 22 lines of position with 500 positions of pre-event and post-event 500 data when the fault line says. How do I pre and post-déclencher lines digital input on a card PCI-6251?

  If this is not possible on this map, which maps PCI would be possible?

  
  

• I need the raw ADC output card PCI-4462 using DAQmx

  I need the raw ADC output card PCI-4462 using DAQmx

  Is it possible or are only regulated units availible.

  Ken Manatt

  [email protected]

  There is a version of 'Raw' DAQmx Read (see image).  This is probably what you are looking for.

  -Alan