Custom ICC profiles for Epson 7800 printer?

Similar Questions

• LR 3.2 installed new PC - location of the pre-defined settings & custom ICC profiles

  No one knows the situation

  (1) defined by the user light Printer Presets

  (2) custom ICC profiles

  I have LR 3.2 install on a new PC...  Catalogue, pictures, everything works fine...    Calibrated the screen ok... I'm just making the printer and I had custom profiles and print settings predefined.  I'm looking on my old PC and can not locate the directory...    I guess, I can just copy these on in the appropriate directory on the new PC under LR 3.2 or basically the same location.

  Hmm... Well, the printer ICC files are under: C:\WINDOWS\system32\spool\drivers\color

  I don't know where the presets are stored.

  See you soon!

• I can't find an OSX El Capital v10.11.3 for Epson WF3520 printer driver.  Can anyone help?

  I can't find an OSX El Capital v10.11.3 for Epson WF3520 printer driver.  Can anyone help?

  Have you checked the section drivers & downloads of the Epson support Web site?

• How to down load for epson sx200 printer installation disc

  How doen load for epson sx200 printer intallation disk

  http://www.Epson.co.UK/printers-and-all-in-ones/inkjet/Epson-Stylus-SX200/drivers-support

• Download Adobe RGB (1998) ICC profile for Linux

  Hi, I am trying to download Adobe RGB (1998) ICC profile for profile ICC downloads - Linux or Unix Linux (end-user profile), but nothing happens after that I accept the terms and conditions. Anyone knows where can I go? Thank you.

  Which linux distribution do you use?

  You need to download the

  FTP://FTP.Adobe.com/pub/Adobe/ICCProfiles/Linux/AdobeColorProfiles-end-user.rpm.tar.gz

  then right-click and open in Archive Manager where you can extract the files.

  If you can not even open them trying this one for windows

  Adobe - ICC profiles: For Windows: profile downloads for Windows

  In addition, you may be able to use some Manager package provided with your distribution, search for icc profiles and there may be some that you can install.

• What is the right icc profile for JPEG taken from DNG files?

  Are they always sRGB, or something else? must they assigned to colors to correctly interpret an icc profile? the correct profile is available in the form of metadata can be read using exiftool or such?

  Profile/color space can be anything - there is a tag called "PreviewColorSpace" DNG that allows to:

  • 0 = unknown
  • 1 = gray Gamma 2.2
  • 2 = sRGB
  • 3 = adobe RGB
  • 4 = proPhoto RGB

  Good practice would be to set an ICC profile on the preview, but I don't think that there is no obligation in this regard.

  Sandy

• where can I get drivers for Epson Stylus printer c760 for windows7

  According to the website of compatibility, I should be able to use this printer on my new computer, but so far I have had no luck

  Epson Stylus c760 support and driver info:
  http://www.Epson.com/cgi-bin/store/support/supDetail.jsp?OID=14416

  On the Epson website:

  Description: Printer drivers Windows 7 for this model are included in the Windows 7 operating system. Follow the instructions below to install the printer Windows 7 driver.

  1. Make sure that your computer is connected to the Internet.
  2. Click on , and then select devices and printers.
  3. Select Add a printer.
  4. Select Add a local printer or Add a network, wireless or Bluetooth printer.
  5. Choose your printer port.
  6. Click on Windows Update and wait for updating the list of printers. The update may take a few minutes.
  7. Select EPSON as the manufacturer, then scroll through the list of printers and select your printer. Follow the on-screen instructions to complete the driver installation.

  Supported systems: Windows 7 32 - bit, Windows 7 64 bit

• Where Photoshop CS5 Gets custom color profiles for?

  Photoshop CS5 is not to see my new color profiles customized for my scanner when I try to "Assign profile" or "convert the profile. He sees my old profiles that I used in CS4. I made sure to copy profiles the following directories:

  / System/library/ColorSync/Profiles /.

  / Library/ColorSync/Profiles /.

  myuseraccount/library/ColorSync/Profiles /.

  where else CS5 does not draw the color profiles of? Furthermore, these profiles old color DO NOT exist in the directories above. your help is greatly appreciated.

  I am under Photoshop CS5 12.0.1 x 32 on mac os x 10.6.4.

  All these places are verified by Adobe applications for color profiles.

  But it is possible that your scanner profiles are corrupt and ColorSync or Adobe applications refuse to use them.

  Try to open them in the ColorSync Utility and see if they might have a problem.

  And make sure the ColorSync Utility has in its list of available profiles.

• ICC-profile for images

  I have a fundamental question about color profiles.

  
  I put the color profile Adobe RGB (1998) for the default PS.

  I'm working on images for most and my question is how to save JPG and other files, if with added ICC Adobe RGB (1998) or not?

  For example:
  My edited image will be published on the web. Added influence of color profile on the colors displayed on the websites? Or computer screens will display default sRGB and color profile added do not effect displayed colors?

  And for the laboratory should be OK Adobe RGB (1998), but I should inform me by laboratory personnel, is not it?

  Thanks for the explanation.

  Do not use Adobe RGB for the web. Most web browsers accept only sRGB images so make sure you convert your images to sRGB before putting them on the web (file-> save for Web & devices done automatically for you)

• The specification dot gain curves for custom CMYK profile

  I am trying to create a CMYK profile custom that would imitate the ICC FOGRA39 (lying) profile, but would offer more control.

  When you create a custom ICC profile, I'm trying to specify the point of curved gain manually by entering the data increase the tonal value published by the International Color Consortium. But the latest data on the far right point (100 on the horizontal axis) is always 100%, high instead of 0% appropriate. In other words, the point at the top right really must be in the lower right. The point is not editable because it doesn't have a correspondent 100: input field.

  

  This is how the curve should really look at:

  

  I want to place the last point at the bottom right, but I can't figure out how to do this. I use Photoshop CC 2014 on Windows 8.1.

  I misunderstood something on point gain curves? Is this a bug? This actually affects the mast for the shadows, or is it just a display issue?

  I would appreciate any pointers to additional information on this problem.

  I should say that you are mistaken. It's my guess, I might add. Since the last point is related to 100% they don't enter the tonal value increase, but the EFFECT of the value tonal increase on a linear input. There is no case in the real world where the curve will go down.

• Impossible to apply an ICC profile to display. can not understand instructions for color management

  I just upgraded again own computer with Windows7 from my old XP machine.  I have icc profiles for my two monitors.  Under XP, I had nothing wrong with 'apply' or 'associate' or 'use' of these profiles by using the MS color, and both monitors would change appearance when starting a State fully calibrated and profiled.

  Now, in Win7, I followed fairly confusing instructions, go to the color management / devices / select one of the screens / click "use my settings for this device" / add a profile box "Profiles associated with this device" using the add"" button.  Then I click on the correct profile in this box and click "Set as default profile".  Nothing happens.  I can put any weird profile as a default, and nothing happens.

  I don't even know instructions during the effective application of this profile is supposed to happen, but guess it is when you click on "set as default profile."

  "It may be a clue that the color management dialog box fails to identify my poster other than in the form ' generic PnP monitor - NVIDIA GeForce 9800 GT" while the control panel NVIDIA and Windows 'Screen Resolution' box both manage to identify the poster correctly and use their own name i, e, Eizo L768 and Samsung SyncMaster.

  In addition, 'Identify display' in the dialogue box CM works exactly the opposite of how it works in the other two boxes that is Samsung (left) is number 1 in color Mgmt, but number 2 in the control panel Nvidia and Windows 'Screen Resolution' box.

  I'm stuck until I can address this issue, so would be very grateful for any help.

  Thank you

  Thanks the geek for your help.  No thank you somehow to anyone from Microsoft.  None of this reflects well on Microsoft; No to the current Windows 7 CM interface design, not the fact that after years of complaints and messing around with color management that they could have finally gotten the mechanics in place, but still cannot explain, or make it possible for mortals to use it, and certainly not the fact that they create these monsters and offer no support to any well-founded None.  Not a response to a MS person here, not a good answer to similar questions scattered throughout the Web, no after sales support during any period after the purchase of a new operating system of MS qualified (it's supposed to be provided by the OEM, but of course, none of them knows this kind of thing, how can you keep waiting if Microsoft don't?).  So - NO support.

  I can't believe I fell for the hype and purchased a new Windows System.  I swear to you that this is my LAST purchase of windows.  Microsoft, despite the amazing improvements in Win7, still do not understand.

  Here's the answer to my problem, thanks to some photographers and no thanks to Microsoft...

  1 ASSOCIATE YOUR PROFILES WITH DISPLAY AND SET as a DEFAULT value
  
  To apply an existing ICC profile (ICM file created by any process of calibration), follow these steps.

  Control panel / display / change display settings / advanced settings / color management / color (new!)  / Devices / select one of your displays * 1 / click "use my settings for this device" * 2 / if necessary adds profile applicable to the area of "Profiles associated with this device" using the "Add" button (if your profile is not already listed but is available somewhere on the network or the computer) / click on the correct profile in this box and click "set as default profile."

  * 1 the dialog boxes CM do not label your displays just like the other dialog boxes, they seem to lose the manufacturer and the model number information that is available elsewhere, so your display ABC model nn appears as display: 1. Generic PnP monitor .  Also note that at least on my system, display "1" was in fact display '2' in the other dialogs settings display and vice versa.

  * 2 that could think by selecting 'Use my settings for this device' would mean the Windows using your settings for this device (screen), but apparently it isn't.  That means... Well, I don't know what that means.  Perhaps it means that if you do select not her, even the next step (see below) will not help you.

  Good work so far - unnecessarily complex - and tortuous, but has a certain logic.  Unfortunately it is not nothing at all, until you train the secret key.  Well it seems that the above should do what you want, you need to do something that is quite obvious and not mentioned at all in the General discussion of the help and apparently not known by the 67 people who have read my question.  In fact, it is listed in the section to help Ms... at the bottom of the "Description of the color management settings" and after a largely incomprehensible mass of things that appear not to be relevant, there is a link that is not listed in the content at the top and almost impossible to see... To enable or disable calibration loading Windows

  2 ACTIVATE THE CALIBRATION BY WINDOWS LOADING

  Here's the little hidden from the help file...

  1. To enable or disable calibration loading of Windows, you must be logged in with an account of a user with administrator privileges.

  2. Click to open color management.

  3. Click the Advanced tab, and then click change system default values.

  4. Click on the Advanced tab in the color - default system, dialog management, and do one of the following:

     • To allow Windows to load and display calibrations, check the box use Windows display calibration.

     • To prevent Windows from loading screen calibration, clear use Windows display calibration check box.

  5. Click Close in the color management - default settings dialog box of the system.

  6. Click Close in the color management dialog box.

  Not only it obscure, it confounds even by the fact that you are in the same dialog twice, but the second time is the reference color - default system management instead of the color management as it was the first two times.   But only on the second time is the required box enabled to allow you to check or do a system wide setting.  Easy to miss.

  Experts of either MS doesn't know about it and can not find in the help files or the other, or that they couldn't be bothered to answer my question.  In any case a) I hope this helps someone else, and b) I hope that Mrs. lift their game to support and actually meets the future to frustrated and powerless people that I was.  Thanks Microsoft for losing a day of my life.

• Required ICC profiles

  Hi, I give up. I want to follow this procedure as found on the site of HP:
  HP printers - using ICC profiles for the Photos in color in Adobe Photoshop. However, after two days of searching, I was unable to locate the profiles ICC from HP for my printer, type of paper and ink, all HP products. They do not currently appear in the drop-down list of profiles of step 3 in the article above. Some old deskjet models are all that are there. I'm looking for ICC profiles for:
  Printer: HP Photosmart C6380
  Paper: HP Premium Plus Photo Paper soft shiny Q5450A
  Ink: Ink HP Vivera.
  Someone at - it a link to where they are? Thank you!!

  Creation of ICC profiles customized for color Photos
  
  1.
  Select file, then print with preview. (Photoshop 6 and earlier versions: Select file, then print.)
  2.
  Select the checkbox show more Options and the management of the colors in the menu drop-down.
  3.
  In the profile menu, select same as Source.
  
  Also, the printer driver must be configured to correctly use custom profiles. Follow the steps below to set up the printer driver.
  
  1.
  Select the file, print, then properties, color.
  2.
  Select managed by application in the color management menu.
  3.
  Click the paper/quality tab, and then select the type of paper in the Type's menu.
  4. click OK, then OK again to print.
  
  NOTE: The paper type must be selected in the software of the printer even when you create a profile. Maximum ink volume limits are determined by the selection of the type of paper, not in the ICC profile.
  With these settings, will perform a printing without any intervention from management of color of an application or the printer driver. This impression is suitable for the creation of profile and measure
  
                 
  

  OR

• PIXMA Pro-100, ICC profiles, etc.

  I will try to make a long story short.  About 5 months ago, I bought a camera Canon T3i.  Is not only the prints that I got at department stores, bought a PIxma Pro-100.  Little did the research, visited account I need to calibrate my monitor, purchased a Datacolor Spyder Pro 4.

  My questions concern the software used to get prints.  I do not have PhotoShop, and I don't want to buy it.  I have PaintShop Pro, but realize that I can't use it.  My computer is Win7.  I do not know cameras, but I've been in it for 30 years.  I know that computers.

  I'm not happy with the impressions I'm away until now.  The colors all are low (for lack of a better word).  Everything I've read about the Pro100 said colors should be rich (saturated).  Mine are not.

  First, I tried the software that came with my camera.  Digital Photo Professional.  It works with the plugin from Canon, Print Studio Pro.  It seems that he has acknowledged, or charges, ICC profiles for Canon paper I use.  It does not recognize or give me the option to select an ICC profile for my monitor.

  I called Canon support.  The guy I spoke to Easy-PhotoPrint EX software recommended.  Said that he should have come on the CD with my Pixma.  He did not.  This software does not use the plugin from Canon.  And appears to be more limited.  He said that it works well with Canon cameras.  Honestly, it looked like it was BS'ing me all the time.  If you don't know the answer, it's ok to put it simply, it's my feeling.

  OK, it turns out be a long story.  Can someone help me?  This printer I have does not measure upward for what I've read about it.  I spent a lot of money to get good prints from my Canon camera.  I don't have this, not even close.  What should I do?

  In DPP, go to tools-> Preferences-> color management and you can select a monitor profile.

• Pro 100 ICC profiles - where are the default values?

  Hi there - I can't believe I'm asking this, but just had to replace an old mac & just cannot figure out how to get the default ICC profiles for the PRO-100? Downloaded the CUPS driver and all other garbage on the site Web of canon and zilch in profiles. Nothing for Canon papers. All 3rd party are thin and easy to handle, but where do you download Canon Communications?

  The internet search just says they should have installed automagically...

  Thank you

  If you install the driver on the Canon Web site, you will get the Canon profiles installed.

  When you added the printer through the System Preferences window have you added the printer version IJ or Hello?

  You want the version IJ. When you click on the + to add a printer, it might take a little time - usually the Hello version appears first.

• U2413, Confused about ICC profiles and sRGB/ARGB modes

  Hello

  I have a question for the calibrated modes (sRGB/ARGB) of U2413.
  -I guess that there's no ICC profiles are delivered with the driver for these because they are focused on the LUT calibrations?
  -However, when the driver is installed, it installs the native ICC profile. This profile still apply in the calibrated LUT modes? I guess it shouldn't because it is for native mode only, but is it? Or I'll remove it?

  Thank you.

  The sRGB and AdobeRGB modes use hardware for calibration LUT in the monitor. If you use these modes you must set at least the standard sRGB or AdobeRGB ICC profiles in your operating system to correctly define color space, in which you are working.

  You could actually make calibrations of LUT of additional software stored in a custom ICC profile, and they would act on top of equipment calibration LUT in the monitor.

  The 'DELL U2413, D6500 color profile' native ICC profile defines the color space of the monitor, which is actually a bit larger than AdobeRGB in certain colors. Do not use it if you set the monitor the sRGB or AdobeRGB modes. According to me, the native ICC profile corresponds to the color space used in preset 'Standard' of the monitor, but there is not LUT stored in the ICC profile to calibrate the colors accurately.