Custom logging OVD plugin

Similar Questions

• "customer logged in, but not in a secure area.

  Why do the dashboard gives the message of a customer logged in, but not in a specific area when there are different exposed areas?

  Thanks in advance.

  Nancy

  If you do not assign a person to an area, but they have completed a form with username and password, they can connect. They are not assigned to a zone, but may still have a connected state.

• OVD Plugin Custom - attribute of the user LDAP recovery

  Hi all

  I develop a plugin for OVD.

  My goal is to retrieve the value of an attribute (for example, "attribut1") when you call a proxy service, who authenticate with a user of TPM.

  For example, I have the user "user1" in OVD and my Proxy Service is called using the credentials of that user. When this happens, my custom plugin is called (since it is attached to my LDAP adapter) and I need access to 'attribute1' value of ID "User1" and calling a WebService with this value.

  Can you please tell me:

  1. In what method should I apply this (get, postSearchEntry, etc...)
  2. How can I get the value of the attribute of this user

  Thank you very much.

  Hello

  Yes, I booted and I could not recover all the information of the DN. In the end, I did the following:

  try {
    chain.nextBind(creds, dn, password, result);
    } catch (DirectoryException e) {
    throw e;
    }
  
  Vector searchAttributes = new Vector();
  
  DirectoryString ldapUsernameDs = new DirectoryString("myattribute");
  searchAttributes.add(ldapUsernameDs);
  
  ChainVector results = new ChainVector();
  chain.getVSI().get(chain.getRequest(), creds, dn, new Int8((byte) 0), ParseFilter.parse("(objectClass=*)"), new Bool(false), searchAttributes, results);
  
  if (results.size() > 0) {
  
  EntrySet es = (EntrySet) results.get(0);
    Entry entry3 = es.getNext();
  
  Vector ldapUsernameValue = entry3.get(ldapUsernameDs);
  Syntax ldapUsernameSyntax = (Syntax) ldapUsernameValue.get(0);
    ldapUsername = ldapUsernameSyntax.toString();
  }
  

  The code needs some improvement, but the idea is there, and it works. Something wrong with it?

• How to set up a custom in OVD 11.1.1.1.0 Java plugin?

  Hi all
  
  I found a metalink document 433862.1 describing how to implement custom OVD Java plugin, it is for the version 10.1.4 and use it OVDM to do, but I can't find OVDM in the 11.1.1.1.0 version, I don't miss something?
  
  Kind regards
  Marijo

  Hi, 11g has a new console web admin directory oid and ovd called Oracle Directory Services Manager (DOHAD) services. The old ovdm, based on eclipse is discouraged.

  See the documentation at [link1 | http://download.oracle.com/docs/cd/E12839_01/oid.1111/e10036/admin_05_odsm_what.htm] and [Link2 | http://download.oracle.com/docs/cd/E12839_01/oid.1111/e10046/toc.htm]

• OVD plugin for correct incorrect bindDN

  My client is facing a client LDAP off-the-self to behave badly which only accepts a base as a search parameter. You cannot specify a bindDN. So when the client tries to authenticate a user, it takes the credentials provided (i.e. samaccountname) and it adds to the research base. Step together to find the directory of the user and retrieve the domain name for authentication is ignored. If the basis of 'research' isn't really a research base and is used to hard-code the part right of the DN and just the samaccountname by adding the RDN. This might work if the users where all in one place... but they are not.
  If the client is trying to use their service OVD to translate that. OVD shall take the provided domain name, enter the RDN of him, search backend AD and then do a bind with the DN returned by the search.
  They do not want to spend too much time developing a custom plugin to do this is this temporary measure during a migration of AD.
  
  (1) is there a plugin out-of-the-box that can be used? I do not go looking through the documents, but I assure you.
  (2) it would be a difficult task plugin to write and someone would have something I can start with?
  
  Kind regards
  Chris

  Hi Chris,

  It might be simpler configure an adapter with a specific to this client application base DN, separate from your normal tree. For example, the base DN of the adapter with the FlatTree plugin could be "Flattened = DC, DC = company, DC = com", while your other cards are under "DC = company, DC = com". In this way other applications would not be affected by the configuration of the plugin required for that specific customer.

  Thank you
  Matt

• A need to the cache of data customized for the plugin

  Hello

  We develop a plugin that will use custom objects (no ESXI/vCenter). So I want to understand is how to store the data in vcenter / Server Virgo (where will the plugin). Also are their some recommended method for expansion of custom objects.

  No, you cannot use Web Client Server or vCenter as your own database server or storage.  Since you are using custom objects, you must provide your own process lats/database where the data resides.  The java plugin, you add to access get data in the layer intermediate Virgo are just a 'transmission', i.e. your data adapter must be able to recover your data customized to your own back (using any protocol API or the communication is more suitable for you)

  The main reason that the code sample chassis uses a store objects in memory is to simplify the configuration of the SDK.  As said in ObjectStore.java header is not the right way to manage data in a production application.

• 11 GR 2 IOM: custom logging

  Hello Experts,
  
  I want to connect my adapter to process custom task errors. How can I enable logging custom IOM 11 GR 2. Kindly share.

  Configuration of Java Code

  Add the following line in your java code.

  Import statement

  import com.thortech.util.logging.Logger;

  private = Logger.getLogger ("Login Name") Logger logger;

  Logging configuration

  Go to the directory DOMAIN_HOME/config/fmwconfig/servers/oim_server1 $ and edit the logging.xml file.

  Configure the log manager

  
  
  
  
  
  
  
  
  

  Include the Configuration of the recorder Logger Manager

  
  
  
  

  Levels of Log Oracle Identity Manager 11G

  Connect ODL level: Type of Message

  SEVERE.intValue () + 100 INCIDENT_ERROR:1
  SERIOUS ERROR: 1
  WARNING WARNING: 1
  NOTIFICATION OF INFORMATION: 1
  NOTIFICATION OF CONFIG: 16
  FINE TRACK: 1
  MORE FINE TRACE: 16
  MORE BEAUTIFUL TRACE: 32

  The journal of the HIGHEST level will give as much debugging information. If you want to debug your managers task or calendar event, please use BETTER log level.

• Where are located the customer logs ReadyCLOUD?

  Hello

  I have errors on the client ReadyCLOUD and I would like to view the logs, however I can't seem to find where they are.

  It is the PC version of client ReadyCLOUD.

  Anyone know?

  Thank you

  I found them, they are subject to:

  c:\Users\\AppData\Local\ReadyCLOUD

• Custom Logging Codes and Messages database options

  I use TestStand 4.5 with the provided standard SQL database schema. I noticed that in the table UUT_RESULT the only time where what a UUT_ERROR_CODE or a UUT_ERROR_MESSAGE is written is when the UUT_STATUS is error. I would like to be able to connect our custom FileGlobals.Error_code and FileGlobals.Error_text in these fields when the UUT fails a test.

  I'm rather not change the schema but just get help on how to get my global variables in the correct fields.

  Thanks in advance.

  Steve

  Steve-

  To accomplish what you're trying to do, IE. the value of the message and the error code USE without updating the database schema, you would have to change the entry points for Single Pass and Test UUT for patterns that you use. You must add a step after the MainSequence called step that evaluates if the call to MainSequence failed and if that were the case, change the last result placed in the Locals.ResultList table. You must set the Locals.ResultList [x]. Error.Code and Locals.ResultList [0]. Error.Msg properties on this result for the global values you mentioned. If overall file values in the template file, then this is an easy task. If the global file value is in the customer file or another file, you will need succeed somehow to the entry point. Many options: store values in station model and global entry point will recover, have value assign customer at the local level in the point of entry using expression as RunState.Root.Locals... or create temporary properties on Execution.RunTimeVariables that contains the model entry point access determine if exists and pull values of. You will need to make sure that the previous values are disabled before the next USE. I hope this helps...

• Type of custom log MultiNumericLimit step

  Hi, I have developed a library using certain types of custom step. I created the type of step from the numerical limit Test Multiple standarda. In run mode the step sequence context GET and using the API of Teststand crash parameters such as:

  Step.Result.Measurement []. Data
  Step.Result.Measurement []. Limits.High
  Step.Result.Measurement []. Limits.Low

  .....

  What I can not change at run time is the name of the measure, because it depends on the line that I selected in the step type. I would change the Step.Result.Measurement [XXX]. State with Step.Result.Measurement [YYY]. Status at run time.

  I havo also another question, but it's a little more complicated to explain. The step type also has an editor that the user may open in the teststand sequence editor. In this editor, the user can select what action to take. When the user finishes the configuration press 'save' on the step step type editor should fill the pameters of the MultiNumeric limit test. Exactly the same thing when the user sets up the test from the tab in the teststand sequence editor (attached). But I can't do it.

  Thank you very much.

  Hi Logatto

  You wrote:... In this case I'm not the SequenceContext because TestStand is not running.

  You will have a SequnceContext. This is the current context of your sequence, you are editing.

  So just enter "ThisContext" Edit-in-step of your step-Type in vi.

  Now you should be able to access the Step property and make your orders.

  Please visit and note this idea for perfomance TS-User: http://forums.ni.com/t5/NI-TestStand-Idea-Exchange/Ability-to-create-user-built-in-StepTypes/idi-p/1...

  Concerning

  Jürgen

• ADF custom logging for Application Framework of WebCenter Portal

  Hello

  I sent 2 x WebCenter Portal framework application in a server cluster. The two applications write to the server even log, and it is extremely difficult to read the log files.

  How can I configure two applications to write in the different log files?

  Please see the document below and hope that answers your query.

  Selective help for WebCenter Portal (Doc ID 1432195.1)

  Concerning

  Françoise

• View 4.5 customer - log in as current user

  I ticked the box log in as current user, but now I don't and then uncheck the box.  Ideas?

  What do you mean you won't be able to uncheck?  The control is grayed out?  Can you post a screenshot?

• Create customer log in page within the Muse with the 3rd party, free hosting of images

  Hello

  I create my Web site in Adobe Muse and I have a third party hosting of my site, I want to create a customer login page to view images by customer. What is the best way to do it?

  ID.

  If you use a third-party free hosting of images and you have already a CRM database and all logic on the side server ready at the end, you can simply create an HTML form and insert in Muse to the object-> the option Insert HTML code.

  Also, you can see this post that would give you an extra idea about how to do this with Adobe hosting via Business Catalyst using the widget of forms of Muse.

  http://forums.Adobe.com/message/5074927#5074927

  Thank you

  Vinayak

• Custom in IOM 11.1.1.5 plugin

  Hi all
  I am developing a custom plugin IOM, which will perform the generation of e-mail after "+" Create User + quote request.
  The version of the IOM is 11.1.1.5.
  
  I followed the official documentation [this link: http://docs.oracle.com/cd/E21764_01/doc.1111/e14309/plugins.htm#CHDFHIGE] and basically did the following steps:
  1 developed java custom code with JDeveloper
  2 build the source code
  3A said the custom in the plugin.xml file plugin
  4. at copied class plugin custom to the IOM server for example in $MIDDLEWARE_HOME/OIMPlugins/lib
  COMMENT: during this operation, I kept exactly the same custom java package directory structure.
  For example, class custom plugin is in the package java my.custom.plugin and I copied the java class custom in the folder $MIDDLEWARE_HOME/OIMPlugins/lib/my/custom/plugin
  5 has created a zip file containing the plugin class (always with its directory structure) and the plugin.xml file
  6 copy the zip file to $OIM_HOME/server/plugins
  7 edited ant.properties file (under $OIM_HOME/Server/plugin_utility) defining the variables wls.home and oim.home
  8 built the wlfullclient.jar (only the first time)
  9 registered the custom plugin
  10A created the custom DataSet plugin file
  11. any using the IOM database ' + weblogicImportMetadata + ' utility
  12. using cache purged "+ PurgeCache + ' utility
  
  NOTE: all steps above was performed using the network user running the process of IOM
  
  Then I create a user using the '+' Create User + model of the application, this custom plugin needs to be raised and is expected to generate the e-mail address for the user in the application.
  This does not, happen that the plugin does not work; in fact, I don't see or any log message custom plugin that I wrote in my code or the user e-mail correctly filled.
  
  I tried exactly the same procedure on another version of IOM (11.1.1.3) as well as custom plugin works.
  
  So, what are the missing steps for IOM 11.1.1.5? I can't find all the differences by comparing the related document of IOM 11.1.1.5 with IOM 11.1.13 a.
  
  Thank you
  Daniele

  Event Manager, try the following:

  and the plugin xml in the form:

  -Marie

  Published by: Bikash Bagaria on December 21, 2011 14:44

• Custom metadata plugin: how to execute code automatically new files?

  I have a goal to see some fields of Fuji-specific metadata in Lightroom. I can see these when I run Fuji by Exiftool files from the command line. I would like to be able to filter and research on them. (Before you go, if anyone knows of an existing plugin that will import the EXIF Exiftool arbitrary, please let me know.)

  I can write a metadata custom for this plugin. Definition of custom fields and tagset is clear for me. I've done this before. What is not clear to me is to know how to trigger the code that parses the files for metadata, and imports. Can I get the user to do so manually by choosing images, then using a menu option - it's easy. Is it possible to automatically invoke instead? You say, when the files are imported?

  Other opinions on how this could work smoothly are welcome. Thank you

  DB

  There used to be an ExifMeta plugin that would automatically synchronize one or more fields of image metadata custom in the catalog, available for viewing, filtering, and research.   Unfortunately, the developer has disappeared, as well as its plugins, about 1.5 years ago.

  The Data Explorer plugin allows you to view and search for fields of arbitrary metadata accessible to Exiftool.  But you have to run it manually whenever you want to display the current values.

  What is not clear to me is to know how to trigger the code that parses the files for metadata, and imports.

  The plugin must have a background task (or tasks) that runs periodically and checks new files and files that have changed since the last time it extracted their metadata.  This can be done quite effective, but it takes effort.

  The background task can scan the new photos using the catalogue: getAllPhotos() and comparing the result with the last time he called it.   I guess that every 5 seconds would not consume any noticeable CPU.  It could be implemented in 10 or 20 lines.

  If you care about the plugin noticing changes made to the metadata of files once they have been imported into LR (for example because an external application changed), it would be harder to do in a reasonable time.  The plugin can save the modification date of the metadata for a photo file whenever it extracted metadata.  The background would periodically scan all the pictures in the catalog, search for files whose current modification date is more recent than that recorded in the custom metadata.   I don't have a good idea for the cost of CPU that it would impose, but I guess you could probably do 10 files per second without significant load.  This would mean that it would take several hours to sweep a catalog of files of 100K.   (Windows and OS X have mechanisms to notify applications of changes to the file system, but these mechanisms are not available through the SDK of course).

  With more complexity, you might also have a background task that periodically uses catalog: findPhotos() to run the smart collection criteria "Medata status is changed on the disk or the status of metadata is detected conflict."  This would be grafted onto the mechanism from LR to notice that files have changed and that he would be very low cost. You can run this query every few seconds without significant impact.  However, there is a chance that this task would be to miss a few modified photos, for example if the user did metadata > read metadata file before the task had a chance to see the file has changed.  So, you would still need the task that periodically scans all the photos in the catalog.

  I never asked the developer to ExifMetadata exactly what he did on this point, but I'm guessing that something similar.