Custom messages of success and failure on quiz results slide

Similar Questions

• Quiz results slide - NaN errors in published Captivate 8 content

  Hello

  I worked on a number of modules with different content in each, which have a short quiz at the end. All except a beautiful work and the quiz results slide displayed correctly the 'score' and 'max' accordingly.

  However, I have a module with an erroneous result reported "0" out of "NaN" and I don't know why it appeared suddenly?

  I have been a model for these modules (even if it is true that it has been outsourced - they should always use the same model)

  I don't see any obvious difference in the parameters or results between this slide and the other modules - so I'm stuck!

  I was wondering if something had gone wrong with the slide therefore results as a test, I copied all the slides except the quiz in a separate model that has worked very well, and then updated the quiz and slides re-edited, still had the same error. This leads me to suspect the content slides are part of the problem. There are some real questions in the content slides / false, which are defined as a "pre-test" type - could these affect something?

  I am using Captivate 8.0.3.290 and I checked the result published scorm cloud and our Moodle LMS - same erroneous result.

  I hope someone can help?

  Thank you

  Jon

  It is difficult to know what is the problem with this model. I highly doubt that the presence of pre-test slides is the cause. It is perfectly possible to have a pre-test and a Final Quiz in a project. To exclude this possibility: try to create a small project with a test question and a real Question slide, using this same model.  Follow the system variable. What is the result?

  You know if this model was created initially to CP8 or is this a version update of a model?

  I never delete the review area, although it is used in two circumstances:

  1. For the message of pass/fail on the Score slide
  2. When a question has been ignored (I always feel that issues are considered to be ignored).

• Displays a button on the quiz results slide

  Use 6 Captivate, I show a "print" on the quiz results slide key only if the user passes the quiz. I tried setting the action in the Quiz > success or failure of the settings to display the button (with a tip action) passed the test but still no luck. On the results for the "print" key slide, I disabled the 'Visible output. Any ideas?

  You can download a complete list with the system variables of: System variables in Captivate 8 - Captivate blog

  The variable system quiz, you will need to use a conditional action is cpQuizInfoPassFail, which is a Boolean value, cannot have two values 1 or 0 (failure) (past).

  Use the event to enter the Score slide to trigger a conditional, tip action

  IF cpQuizInfoPassFail is equal to 1

  See the Bt_Print

  Continue

  ON THE OTHER

  Continue

• Is there a way to change the formulas for the fields of the Quiz results slide?

  I see the placeholders for fields on the Quiz slides (number of Questions = {total-issues}).  Is there a way to view and change these calculations?

  You can select which variables appear on the Quiz results slide, but you can't really change the calculations used by Captivate under the hood.

  Depending on what you're trying to reach, you may be able to insert your own captions reading off the same variables and use advanced Actions and Expressions to concoct different results.  But it depends a lot on what you want to do and whether or not the variables are exposed, and whether or not the limited Expressions available will allow the calculation.

• Several Quiz result slides in a lesson?

  I have a 'lesson' to be used for an evaluation only.  There are 15 sections of question slides: each section includes questions pertaining to a line.  The user was given the flexibility to decide what article issues it wants to fill and then receive a note on these points.  It is even possible to have multiple quiz result slides in a lesson?  Is it possible through the sections of the slide in connection or using the Pool of matter Manager instead of a lesson in quiz slides?  I get discharge when I suggest dividing each section of the teachings of their own...

  Captivate allows only a slide is quiz by project results. But you can fake a Quiz results to your own slide (sort of) using System Variables and buttons.

  If the user is required to answer 15 questions about 100 say and you wanted these randomized questions, then Question Pools would be the way to go.

  The connection project will change the path, the user takes the contents and means they cannot see some slides or questions, but then your next issue will be that if the user does not all the quiz questions, they may not be able to achieve a pass mark.

  You should push on people who are pushing all dividing each section its own separate project output.  It is by far the simplest and the best way to treat this type of situation.

• The message of success and error of process Page PL/SQL in 4.1.1.00.23

  Version 4.1.1.00.23

  Hello

  I have a HTML box that contains Page elements for the user to select values to add records.

  The Page is a Page of PL/SQL process that is triggered by a button.

  I put a Massage of success in the area of Messages on the process of Page in the properties of the success and error, but there are not displayed.

  I also tried: apex_application.g_print_success_message: = ' we inserted records. " At the end of the process.

  It is on the theme: 13. Blue-grey

  How can I get the message to display?

  Can what additional information I give?

  Thank you

  Joe

  Design has changed direction to another page.

  The message is displayed correctly.

  Thank you

  Joe

• Message of success or failure only, after Submit form page

  Hello
  
  I have a setup form/report on a table, but I don't want the form creates a branch to the table after the submission. Instead, I want that he stay on the page form and displays a message 'Success' or 'error '. I started by removing the automatic connection has been set in place, but how to display the message of success/fail now me?
  
  
  Thank you

  create a branch to the same page and check the box "include the success of process message."

  If you want you can give the condition of your click on the submit button.

  Thank you
  Tauceef

  Published by: Tauceef on May 11, 2011 21:59

• CP5: Rating and Quiz result slides for selected Questions

  Hello world

  I am trying to create a course that has several "knowledge checks" that need not be striped or track, then a 10 question at the end quiz that must be marked and tracked.

  Someone does know of a way to separate these two elements so that the slide Quiz results do not cover my data 'check knowledge' and gives just the details of the user of the 10 question quiz? I would also use the progress bar, but only for the last 10 questions.

  Moreover, if the result of the quiz screen separated the results of controls knowledge quiz, which would work as well.

  Thank you
  Graham

  Hello

  If you are using the Question slides that come with Captivate, all slides will be added to the total score because you can have than a Quiz in a CP-file.

  Some ideas: you can assign to the partition of the first (not to follow) slides to 0, or if possible change issues marked the investigation (no is not marked).

  If by progress, you mean the indication ' Question X of Y ", there, you'll need to do your own counters, with variables user and advanced actions. If you want to have total control of your question slides, that you can create the first group issues yourself and use only default to the last real Quiz Question slides. Just published a blog post today with a few links to articles on customizing quizzes. Feel free to check it out:

  Customize your Quiz using advanced actions

  Lilybiri

• Quiz results slide... No button continue

  Captivate v5.5

  (Not sure if relevant, but the project below was created in v4 and opened by v5.5 and is now a v5.5 project.)

  At the end of a quiz, I have a v4 and the quiz results page, I got a 'Continue' button on the quiz results page to allow to the learner advance to the next slide.

  Now in version 5.5 I see the continue button on the slide on the film strip - but it does not appear in the timeline!

  More when I run the project - there is no continue on the slide button full!

  Can anyone offer help as to what is the cause so I can let my learners to spend after vieweing their score?

  Noel

  Noel,.

  Just pulled up Cp4 because you made me doubt: has the same feature, button continue (and the other buttons on the slide in question/score) were not visible on the Timeline in 4 either. So I'm really stumped.

  

  Normally this button must also exist in CP5.5, it executes the actions you specify in Quiz preferences (success or failure according to..)

  

  You can see that the default action is to continue.  But this slide of score is perhaps the last slide in your project? You can check that?

  Lilybiri

• Quiz results slide are not related.

  Hello

  I will continue the concise OP and try to respond to all feedback that the community is able to provide because it is the way in which the problems are solved. I'll Preface I am personally most familiar with scenario 2, but the PM is biased against it, so I built my 9 Captivate modules. The question arises when I try to create an assessment. I insert my question slides, fill out the form by selecting the number and the variety of issues that I need; which works very well. Question slides themselves work fine; Can I change the questions, answers, the layout, etc. But the result that has been added automatically and don't slide work. No matter if I publish and view of the SGA, publish and view locally or spotted in the CP9 results slide does not work. All possible categories are virgins or 0. I created a project completely new to Captivate, populated with default question slides, the default automatic result slide and the same result.

  I've seen other messages of the forum here and elsewhere that describe almost the same question. But they are for Captivate 4-7 or remained unanswered. The Advanced Interaction (F9) appears as the moderators/administrators to be in these different positions have said. What solutions could try then? What I might have missed? Can what information I post to help me to get an answer?

  Thanks in advance.

  Pre-test slides will appear in some system quiz variables, but they won't score in the score slide. If you want to create a slide of score, you need to use dedicated quiz pre-test system variables. The normal quizzing system such as cpInfoPercentage and cpQuizInfoPointsscored variables do not include the results of slides before the test.

  The Advanced Interaction is confusing here.  Take a look at my articles on the quiz variables system and download the descriptive list where I tried to explain in more detail the meaning of each variable:

  System variables in Captivate 8/9 - Captivate blog

• Re-insert the 8 Captivate quiz results slide

  I created a course of six modules, which all have a short quiz at the end. During the preview of the project with the project manager, quiz slides do not move forward in the preview of the course (and no more than the bar room). I had to go and remove the quiz slides and slides of results in order to highlight the entire course of my manager.

  Now that I'm trying to work on game shows, I am able to insert question slides but not the results slides that I would appear at the end of each short quiz.  This could be a framework global quiz I should change? Is there a way I can reset the quiz in the course and start from the beginning (with slides of results displayed)?

  I realize it's probably 101 stuff for everything that you users of Captivate veterans, but please bear with me... I am a newbie to Captivate.

  Thanks in advance for your ideas!

  I am little confused: you can have only a single slide quiz and 01:20 in a CP-file (requirement of SCORM) and you seem to talk about several slides of results?  That should mean that you have created custom intermediate score slides as I explained here: Intermediate Score slides - Captivate blog

  Or each module in a separate cptx file? The slide of score will not be deleted at all, it's just hidden. You can make it visible again using preferences, settings, "Score at the end of the Quiz Show" Quiz

  Regarding the reset of the questions that is possible using the recovery button. Return to the user will be sent to the first slide question or being marked. This means that you will have to provide more than 1 attempt on Quiz level. More information about the slide in question/score:

  Question Question slides in Captivate - Captivate blog

  Question Question slides - part 2 - Captivate blog

• captivate quiz results slide

  Hello

  I am a beginner on captivate?

  In my model, I have 2 questions on quiz questions and press end 5.

  When I finished, the result of the slide was OK, but now I can't get the right result: it seems that 1 is included in the result.

  When I publicate the model (flash), issues don't appear as 1/5, 2/5 but 1/1, 2/1... 5/1. It seems I have only one issue.

  What am I wrong?

  Thanks for help. Martine

  If you use Captivate 9, simply use Questions to check previous knowledge as your quiz question slides.  These are not counted as part of the quiz.

• Print the quiz results Slide Widget

  Hello all,.

  I'm creating a Captivate 5.5 project which will include a quiz. I would like a widget impression to become visible on the slide of quiz results only for users who obtain a pass mark.

  I inserted the printing on the slide widget and I unchecked the Visible box his "properties and created an Action Advanced named Show_Print to show." In the pass/fail Quiz preferences section, I've specified that my Action of Advanced "Show_Print" must be triggered if a passing grade is reached.

  So far I was not able to run.

  I missed something or is this something that can be done?

  Hello

  I guess that you have attached the action advanced Quiz, Pass and Fail, preferences on Grade Crossing as event?

  This seems indeed does not work, strangely. Checked that it out and sometimes didn't even have the features to hide/show for this is.

  I could, however, reach your goal in this way:

  • I have inserted the widget on the slide to score and make it visible (kept the default label for Widget_1, not my usual workflow)
  • create a conditional tip action that checks the cpQuizInfoPassFail system variable
    • IF cpQuizInfoPassFail = 1
      • THEN continue
      • Hide from ANOTHER Widget_1
  • attach this action to the event on enter for the slide of score, the widget will now be hidden when failed

  Hope this helps you,

  Lilybiri

• Success and failure with Drag 'n Drop

  Drag n Drop works quite well, but I cannot understand how "Display success - failure - index" in this interaction

  Drop n Drag - Actions - I checked the legend of failure that works well. Also cancel and reset buttons work well.

  Impossible to get a button of success who says well done continue.

  The best I've done is 'Success here Type text' box appear in the presentation when you click on the page - to any random combination.

  Anyone had success or advice how to combine the button quiz success in drag n drop?

  appreciate advice

  Captivate 8 (new user)

  Check: advice & glide - Captivate blog

• HP Probook 4520 s memory 8 GB (2x4gb) Corsair pass without success and failure

  OK, here's the story

  My laptop is HP Probook 4520 s

  with Windows Windows 8.1 (6.3) 64-bit (Build 9600)

  Please see the end of this post for CPU - Z report of specs.

  Currently I have 3 GB of memory installed - had to install their return after failed upgrade.

  Please check back the CPU - Z report for the memory module specifications.

  I bought the memory pack 2 x 4 GB Corsair following

  Corsair CMSO8GX3M2A1333C9 8 GB (2x4gb) 1333 MHz DDR3 SODIMM

  http://www.scorptec.com.au/product/memory/SODIMM/43657-CMSO8GX3M2A1333C9

  Plug new modules:

  Lifetime warranty
  Size 8 GB (2 x 4 GB) Kit
  Performance profile none
  Fan included no.
  Heat spreader-
  Configuration memory dual channel
  Type of DDR3 memory
  Package - memory Pin 204
  Package - Format memory SODIMM
  Tested voltage 1.5
  SPD tension 1.5
  PC3-10600 (1333 MHz) memo speed
  SPD speed 1333 MHz
  Tested speed 1333 Mhz
  Tested latency 9-9-9-24
  SPD 9-9-9-24 latency

  When I installed the memory module on the laptop, I couldn't go essentially exceed the stage of the POST. Is the HP logo appears on the screen and what is it... That's all... nothing beyond this point.

  When I went to the BIOS settings, memory read 81xxMB successfully, it is essentially 8 GB of RAM.

  I tried to reset the BIOS settings, has not yet.

  I removed the 2 x 4 GB modules, put back the two original modules of 1 GB and 2 GB - those who came with the laptop-, everything worked again.

  What was not right here... ?

  PS please don't answer not with lame answers "it's weird", "that's strange", I know it's weird and strange. I want clear and specific suggestions.

  Report of CPU - Z below:

  TXT of CPU - Z report
  -------------------------------------------------------------------------

  Binary files
  -------------------------------------------------------------------------

  CPU - Z version 1.69.0.x64

  Processors
  -------------------------------------------------------------------------

  Number of processors 1
  Number of threads 4

  APICs
  -------------------------------------------------------------------------

  Processor 0
  -Core 0
  -Wire 0 0
  -Thread 1 1
  -Core 2
  -0-4 wire
  -Wire 5 1

  Timers
  -------------------------------------------------------------------------

  Timer ACPI 3,580 MHz
  Timer HPET 14,318 MHz
  Timer perf 2,208 MHz
  Sys 1,000 KHz timer
  Timer 133,02 MHz BCLK

  Information for processors
  -------------------------------------------------------------------------

  Processor 1 ID = 0
  Number of cores 2 (max 8)
  Number of threads 4 (max. 16)
  Name Intel Core i5 430M
  Code-named Arrandale
  Specification Intel (r) Core i5 CPU M 430 2.27 GHz
  Package (platform ID) Socket 989 rPGA (0x4)
  CPUID 6.5.2
  CPUID long 6.25
  Core Stepping C2
  The 32nm process technology
  TDP limit 25 Watts
  Basic speed 2527,3 MHz
  Multiplier x Bus 19.0 x 133.0 MHz speed
  2394,3 MHz rated Bus speed
  Stock frequency 2266 MHz
  Instructions sets MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, EM64T, VT - x
  Data L1 cache 2 x 32 KB, size 8-way line set associative, 64 bytes
  L1 instruction cache 2 x 32 KB, size 4-way set associative line, 64 bytes
  L2 cache 2 x 256 KB, size 8-way line set associative, 64 bytes
  Cache 3 MB L3, size 12 channels line set associative, 64 bytes
  FID/VID control Yes

  Turbo Mode supported, enabled
  2533 MHz Max turbo frequency
  Max-non-Turbo report 17 x
  Max turbo report 19 x
  Rate of return max 9 x
  TDC limited 21 amps
  Basic NT 21 Watts
  Uncore PDT 4 Watts
  Power @ 9 x 7 Watts
  Power @ 10 x 8 Watts
  Power @ 11 x 9 Watts
  Power @ 12 x 11 Watts
  Power @ 13 x 13 Watts
  Power @ 14 x 15 Watts
  Power @ 15 x 18 Watts
  Power @ 16 x 21 Watts
  Power @ 17 x 25 Watts
  Number of bus max 255
  PCI peripheral device connected to the 255 bus, device 2, function 1

  Chipset
  -------------------------------------------------------------------------

  Northbridge Intel Havendale/Clarkdale Host Rev. Bridge. 12
  Southbridge Intel HM57 Rev. 06
  Graphics interface PCI-Express
  Width link PCI-E x 16
  PCI-E Max Link width x 16
  Type of DDR3 memory
  Memory size 3 GB
  Double channels (symmetrical)
  Frequency 532,1 MHz memory (04:16)
  Latency CASE # (CL) 7.0
  RAS # for CASE # delay (tRCD) 7
  RAS # Precharge (tRP) 7
  Cycle Time (tRAS) 20
  Time to Row Refresh Cycle (tRFC) 60
  Control rate (CR) 1 t
  Base address e/s MCHBAR 0x0FED10000
  E/s MCHBAR size 4096
  MCHBAR records

  DMI
  -------------------------------------------------------------------------

  DMI BIOS
  vendor Hewlett-Packard
  version 68AZZ version F.0F
  Day 18/02/2011
  ROM size 2560 KB

  System DMI information
  Manufacturer Hewlett-Packard
  product HP ProBook 4520 s
  Unknown version
  series 2CE0211M4C
  UUID {1520830E-6A57-11DF-8C36-42C05900004D}
  SKU WS879EA #ABV
  family 103C_5336AN

  DMI Baseboard
  vendor Hewlett-Packard
  model 1411
  review of KBC Version 57,34
  series 2CE0211M4C

  DMI system box
  Manufacturer Hewlett-Packard
  chassis type Notebook
  2CE0211M4C series chassis

  DMI processor
  Manufacturer Intel(r) Corporation
  model Intel (r) Core i5 CPU M 430 2.27 GHz
  clock speed 2264,0 MHz
  The FSB 133.0 MHz speed
  multiplier x 17.0

  DMI Extension slot
  PCI SLOT1 designation
  type of PCI
  32-bit width
  No. populated

  DMI OEM channels
  String [0] 70/71 79 7 ABS has 7 b 7 c
  v01.4A CSM chain [1]
  chain [2] www.hp.com

  DMI physical memory matrix
  location motherboard
  use system memory
  correction no
  Max 8192 MB capacity
  Max # of devices 2

  DMI memory device
  name high-Slot 1 (top)
  format SODIMM
  unknown type
  width total 64-bit
  64-bit data width
  Size 2048 MB

  DMI memory device
  name high-Slot 2 (under)
  format SODIMM
  unknown type
  width total 64-bit
  64-bit data width
  size 1024 MB

  Storage
  -------------------------------------------------------------------------

  Drive 0
  Device path \\?\scsi#disk&ven_&prod_st9320423as#4&1f4bc32b&0&000000#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
  Type set
  Name ST9320423AS
  Capacity GB 298,1
  SMART Support Yes

  USB devices
  -------------------------------------------------------------------------

  Generic USB hub USB Device class = '0 x 09' subclass = 0 x 00, seller = 0 x 8087, product = 0 x 0020
  Peripheral USB device USB Composite class = '0xEF' subclass = 0 x 02, seller = 0 x 0461, product = 0x4DB6
  Generic USB hub USB Device class = '0 x 09' subclass = 0 x 00, seller = 0 x 8087, product = 0 x 0020
  Peripheral USB Microsoft mouse and detection (USB) keyboard driver, class = "0x00" subclass = 0 x 00, vendor = 0x045E, product = 0 x 0745

  Graphics
  -------------------------------------------------------------------------

  Number of cards 1

  API chart
  -------------------------------------------------------------------------

  ATI I/O API

  Graphics cards
  -------------------------------------------------------------------------

  Display adapter 0
  Name ATI Mobility Radeon HD 4500 Series (Microsoft Corporation - WDDM v1.1)
  Manufacturer 0x103C (0 x 1411)
  512 MB memory size
  Bus device PCI 1 (0x1), device 0 (0x0), function 0 (0x0)
  Vendor ID 0 x 1002 (0x103C)
  The model 0 ID 9555 x (0 x 1411)
  Performance level 0

  Win32_VideoController AdapterRAM = 0x20000000 (536870912)
  Win32_VideoController DriverVersion = 8.97.10.6
  Win32_VideoController DriverDate = 20/06/2012

  Software
  -------------------------------------------------------------------------

  Windows Version Microsoft Windows 8.1 (6.3) 64-bit (Build 9600)
  Version of DirectX 11.0

  Clear and precise. Your laptop uses the memory of 1.35 volts and that you have installed 1.5 volt.

  This is the crucial page for memory you need:

  http://www.crucial.com/store/listparts.aspx?model=ProBook%204520s

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.