Quiz results slide... No button continue

Similar Questions

• Displays a button on the quiz results slide

  Use 6 Captivate, I show a "print" on the quiz results slide key only if the user passes the quiz. I tried setting the action in the Quiz > success or failure of the settings to display the button (with a tip action) passed the test but still no luck. On the results for the "print" key slide, I disabled the 'Visible output. Any ideas?

  You can download a complete list with the system variables of: System variables in Captivate 8 - Captivate blog

  The variable system quiz, you will need to use a conditional action is cpQuizInfoPassFail, which is a Boolean value, cannot have two values 1 or 0 (failure) (past).

  Use the event to enter the Score slide to trigger a conditional, tip action

  IF cpQuizInfoPassFail is equal to 1

  See the Bt_Print

  Continue

  ON THE OTHER

  Continue

• Custom messages of success and failure on quiz results slide

  I'm trying to create a custom message of success and failure on the quiz results slide, using certain colors in the text caption to reflect the brand of our company. I've added a tip action entering the slide, so that if the percentage of quiz is 80% or more, shows message of success and failure message leathers. It seems like it should work, but for some reason, only the fault message views, no matter if I fail or pass. Anyone tried this with any success?

  Thanks for your help!

  This button is very important: clicking on it will launch the actions that you define in Quiz preferences, success/failure. Think that it is also mentioned in my blog, when I talk about the score slide. Maybe that you were lucky, but I especially advice to add a line short slide after this slide score, certainly everything is transferred correctly, especially when launched by LMS and many users will do the test at the same time (I have used in a college for some exams). In this case you can set the actions of pass/fail on the issue level «Go to next page»

  This thread is marked still unanswered, so I guess it isn't completely resolved?

• Several Quiz result slides in a lesson?

  I have a 'lesson' to be used for an evaluation only.  There are 15 sections of question slides: each section includes questions pertaining to a line.  The user was given the flexibility to decide what article issues it wants to fill and then receive a note on these points.  It is even possible to have multiple quiz result slides in a lesson?  Is it possible through the sections of the slide in connection or using the Pool of matter Manager instead of a lesson in quiz slides?  I get discharge when I suggest dividing each section of the teachings of their own...

  Captivate allows only a slide is quiz by project results. But you can fake a Quiz results to your own slide (sort of) using System Variables and buttons.

  If the user is required to answer 15 questions about 100 say and you wanted these randomized questions, then Question Pools would be the way to go.

  The connection project will change the path, the user takes the contents and means they cannot see some slides or questions, but then your next issue will be that if the user does not all the quiz questions, they may not be able to achieve a pass mark.

  You should push on people who are pushing all dividing each section its own separate project output.  It is by far the simplest and the best way to treat this type of situation.

• Quiz results slide - NaN errors in published Captivate 8 content

  Hello

  I worked on a number of modules with different content in each, which have a short quiz at the end. All except a beautiful work and the quiz results slide displayed correctly the 'score' and 'max' accordingly.

  However, I have a module with an erroneous result reported "0" out of "NaN" and I don't know why it appeared suddenly?

  I have been a model for these modules (even if it is true that it has been outsourced - they should always use the same model)

  I don't see any obvious difference in the parameters or results between this slide and the other modules - so I'm stuck!

  I was wondering if something had gone wrong with the slide therefore results as a test, I copied all the slides except the quiz in a separate model that has worked very well, and then updated the quiz and slides re-edited, still had the same error. This leads me to suspect the content slides are part of the problem. There are some real questions in the content slides / false, which are defined as a "pre-test" type - could these affect something?

  I am using Captivate 8.0.3.290 and I checked the result published scorm cloud and our Moodle LMS - same erroneous result.

  I hope someone can help?

  Thank you

  Jon

  It is difficult to know what is the problem with this model. I highly doubt that the presence of pre-test slides is the cause. It is perfectly possible to have a pre-test and a Final Quiz in a project. To exclude this possibility: try to create a small project with a test question and a real Question slide, using this same model.  Follow the system variable. What is the result?

  You know if this model was created initially to CP8 or is this a version update of a model?

  I never delete the review area, although it is used in two circumstances:

  1. For the message of pass/fail on the Score slide
  2. When a question has been ignored (I always feel that issues are considered to be ignored).

• Is there a way to change the formulas for the fields of the Quiz results slide?

  I see the placeholders for fields on the Quiz slides (number of Questions = {total-issues}).  Is there a way to view and change these calculations?

  You can select which variables appear on the Quiz results slide, but you can't really change the calculations used by Captivate under the hood.

  Depending on what you're trying to reach, you may be able to insert your own captions reading off the same variables and use advanced Actions and Expressions to concoct different results.  But it depends a lot on what you want to do and whether or not the variables are exposed, and whether or not the limited Expressions available will allow the calculation.

• Quiz results slide are not related.

  Hello

  I will continue the concise OP and try to respond to all feedback that the community is able to provide because it is the way in which the problems are solved. I'll Preface I am personally most familiar with scenario 2, but the PM is biased against it, so I built my 9 Captivate modules. The question arises when I try to create an assessment. I insert my question slides, fill out the form by selecting the number and the variety of issues that I need; which works very well. Question slides themselves work fine; Can I change the questions, answers, the layout, etc. But the result that has been added automatically and don't slide work. No matter if I publish and view of the SGA, publish and view locally or spotted in the CP9 results slide does not work. All possible categories are virgins or 0. I created a project completely new to Captivate, populated with default question slides, the default automatic result slide and the same result.

  I've seen other messages of the forum here and elsewhere that describe almost the same question. But they are for Captivate 4-7 or remained unanswered. The Advanced Interaction (F9) appears as the moderators/administrators to be in these different positions have said. What solutions could try then? What I might have missed? Can what information I post to help me to get an answer?

  Thanks in advance.

  Pre-test slides will appear in some system quiz variables, but they won't score in the score slide. If you want to create a slide of score, you need to use dedicated quiz pre-test system variables. The normal quizzing system such as cpInfoPercentage and cpQuizInfoPointsscored variables do not include the results of slides before the test.

  The Advanced Interaction is confusing here.  Take a look at my articles on the quiz variables system and download the descriptive list where I tried to explain in more detail the meaning of each variable:

  System variables in Captivate 8/9 - Captivate blog

• Re-insert the 8 Captivate quiz results slide

  I created a course of six modules, which all have a short quiz at the end. During the preview of the project with the project manager, quiz slides do not move forward in the preview of the course (and no more than the bar room). I had to go and remove the quiz slides and slides of results in order to highlight the entire course of my manager.

  Now that I'm trying to work on game shows, I am able to insert question slides but not the results slides that I would appear at the end of each short quiz.  This could be a framework global quiz I should change? Is there a way I can reset the quiz in the course and start from the beginning (with slides of results displayed)?

  I realize it's probably 101 stuff for everything that you users of Captivate veterans, but please bear with me... I am a newbie to Captivate.

  Thanks in advance for your ideas!

  I am little confused: you can have only a single slide quiz and 01:20 in a CP-file (requirement of SCORM) and you seem to talk about several slides of results?  That should mean that you have created custom intermediate score slides as I explained here: Intermediate Score slides - Captivate blog

  Or each module in a separate cptx file? The slide of score will not be deleted at all, it's just hidden. You can make it visible again using preferences, settings, "Score at the end of the Quiz Show" Quiz

  Regarding the reset of the questions that is possible using the recovery button. Return to the user will be sent to the first slide question or being marked. This means that you will have to provide more than 1 attempt on Quiz level. More information about the slide in question/score:

  Question Question slides in Captivate - Captivate blog

  Question Question slides - part 2 - Captivate blog

• Print the quiz results Slide Widget

  Hello all,.

  I'm creating a Captivate 5.5 project which will include a quiz. I would like a widget impression to become visible on the slide of quiz results only for users who obtain a pass mark.

  I inserted the printing on the slide widget and I unchecked the Visible box his "properties and created an Action Advanced named Show_Print to show." In the pass/fail Quiz preferences section, I've specified that my Action of Advanced "Show_Print" must be triggered if a passing grade is reached.

  So far I was not able to run.

  I missed something or is this something that can be done?

  Hello

  I guess that you have attached the action advanced Quiz, Pass and Fail, preferences on Grade Crossing as event?

  This seems indeed does not work, strangely. Checked that it out and sometimes didn't even have the features to hide/show for this is.

  I could, however, reach your goal in this way:

  • I have inserted the widget on the slide to score and make it visible (kept the default label for Widget_1, not my usual workflow)
  • create a conditional tip action that checks the cpQuizInfoPassFail system variable
    • IF cpQuizInfoPassFail = 1
      • THEN continue
      • Hide from ANOTHER Widget_1
  • attach this action to the event on enter for the slide of score, the widget will now be hidden when failed

  Hope this helps you,

  Lilybiri

• captivate quiz results slide

  Hello

  I am a beginner on captivate?

  In my model, I have 2 questions on quiz questions and press end 5.

  When I finished, the result of the slide was OK, but now I can't get the right result: it seems that 1 is included in the result.

  When I publicate the model (flash), issues don't appear as 1/5, 2/5 but 1/1, 2/1... 5/1. It seems I have only one issue.

  What am I wrong?

  Thanks for help. Martine

  If you use Captivate 9, simply use Questions to check previous knowledge as your quiz question slides.  These are not counted as part of the quiz.

• CP5: Rating and Quiz result slides for selected Questions

  Hello world

  I am trying to create a course that has several "knowledge checks" that need not be striped or track, then a 10 question at the end quiz that must be marked and tracked.

  Someone does know of a way to separate these two elements so that the slide Quiz results do not cover my data 'check knowledge' and gives just the details of the user of the 10 question quiz? I would also use the progress bar, but only for the last 10 questions.

  Moreover, if the result of the quiz screen separated the results of controls knowledge quiz, which would work as well.

  Thank you
  Graham

  Hello

  If you are using the Question slides that come with Captivate, all slides will be added to the total score because you can have than a Quiz in a CP-file.

  Some ideas: you can assign to the partition of the first (not to follow) slides to 0, or if possible change issues marked the investigation (no is not marked).

  If by progress, you mean the indication ' Question X of Y ", there, you'll need to do your own counters, with variables user and advanced actions. If you want to have total control of your question slides, that you can create the first group issues yourself and use only default to the last real Quiz Question slides. Just published a blog post today with a few links to articles on customizing quizzes. Feel free to check it out:

  Customize your Quiz using advanced actions

  Lilybiri

• Quiz results Slide - Captivate 7

  I have trouble getting the results of the Quiz to view a Captivate 7 project created from a template file. I've added a question slide and it does not appear automatically.

  Ensure that the Score to show at the end of the Quiz checkbox is enabled in the preferences > Quiz > settings.

  Anthony

• My (Captivate 9) Quiz results slide does not score or totals - results

  I set Quiz preferences. Is there anything else I need to do? Partition doesn't appear after publication or when published on first LMS.

  Have you checked Panel Advanced Interaction (F9) to see the marked objects

  and the Total score? You remove objects incorporated (have no individual

  the time line) on the slide to score?

• Can we remove the button continue to Quiz results?

  Hello world

  Is there a way to remove the continue button on the Quiz results page?

  I have a captivate file in which there is a slide thank you at the end after than the Quiz results slide. Now, here's the problem - the user is just to finish the quiz and the closure of the browser tab - which does not appear inside the LMS completion status. The user must need to display the slide thank you - so that CMS can answer that the status of "completed."

  Now I want to remove the button continue on quiz results slide so that doesnot users to go forward to the next slide to complete the course. And I'll put here the thank you message in single result of the quiz slide.

  Can I remove the continue button on the Quiz results page so that it could be the last slide?

  Concerning

  Vikas Sharma

  Remove the button continue results Quiz slide is NOT a good idea in my experience.  By clicking the button triggers features continue in Captivate to complete the quiz and post the score to the LMS.  If this button is not checked, Captivate maybe isn't sure that the person has decided that they are finished with the quiz and wants their score to be captured by the LMS at that time here.  There are often other buttons on the Quiz results slide to offer the user the possibility of recovery or to review the Quiz.  Only the continue button is designed to take them further beyond the Quiz results slide.

  Like you, I also found learners often fail to grasp the importance of the button continue and do not realize that they must do something extra (beyond to reach the Quiz results slide) so that their score to capture.  So what I usually do is to rename the button continue for something more meaningful like: save your Score, or record Quiz results now.  Have a name like that (and make nice and big button and "BOLD" so that it is not easy to Miss) clearly says to people that they need to click if they want to keep their score.  It's just a simple change, but it has virtually eliminated all the questions we had with people just close their browser when they saw the results of the Quiz.

• Why are displayed in preview mode, but not to publish the text slide Quiz results?

  The last slide in the project is the standard Quiz results slide. I would like to add a message at the bottom of the slide that says: "Congratulations!" You have completed this training! "When I inserted a text caption with the message, it appeared in mode, overview; However, it does not appear when I published the project. So I tried to insert as a smartshape with added text, but he got the same result.

  Any thoughts on what I am doing wrong?

  Note also that the Question slides have a suspension point. You must make sure that the object appears before the point of interruption.

  See you soon... Rick