Message of success or failure only, after Submit form page

Similar Questions

• Custom messages of success and failure on quiz results slide

  I'm trying to create a custom message of success and failure on the quiz results slide, using certain colors in the text caption to reflect the brand of our company. I've added a tip action entering the slide, so that if the percentage of quiz is 80% or more, shows message of success and failure message leathers. It seems like it should work, but for some reason, only the fault message views, no matter if I fail or pass. Anyone tried this with any success?

  Thanks for your help!

  This button is very important: clicking on it will launch the actions that you define in Quiz preferences, success/failure. Think that it is also mentioned in my blog, when I talk about the score slide. Maybe that you were lucky, but I especially advice to add a line short slide after this slide score, certainly everything is transferred correctly, especially when launched by LMS and many users will do the test at the same time (I have used in a college for some exams). In this case you can set the actions of pass/fail on the issue level «Go to next page»

  This thread is marked still unanswered, so I guess it isn't completely resolved?

• Make all the text fields to read only after signing form

  Hello

  I have a form of direct cycle that must have all the defined text fields as read only after the signing.

  The java script has been placed in the sign post to a digital signature field event.

  for (var i = 0; i < this.numFields; i ++) {}

  NJC var = this.getNthFieldName (i);

  If (cNm.type = "text") this.getField (NJC) .readonly = true;

  }

  After signing the following the error in console form appears:

  this.getNthFieldName is not a function

  Can someone advise please how to change the script so that when the form is signed all text fields become ready only?

  Any help will be most appreciated.

  Thank you.

  You don't need any JavaScript to do this.

  In the designer, you can configure the field signature in this way, that all fields will be locked after the signing.

  Look here:

  http://forums.Adobe.com/message/3121870?TSTART=2

• Application points value becomes zero after submit - Login Page

  Hi all
  
  I created 3 application elements, and I put the values of them in a calculation in the login page (Page 101) after Submit.
  
  After the FIRST connection its value becomes zero but then if I logout and reconnect, then it sets the value in the application parts.
  
  Not understand...! Can someone help me please?
  
  FYI - I use Apex v3.2 on FF v5.0 & IE v7.0.
  
  Your help would be appreciated.
  
  Best regards
  Blabla

  Hello

  Change the type of calculation to the SQL query and

    select max(person_name)
    from rp_persons_tb
    where UPPER(user_id) = :APP_USER
  

  Kind regards
  Jari

• Make the fields to a custom read-only after clickingsubmit button page to insert page

  Hi all

  I have a custom insert page. When the user enters and click on submit, I want to do all the other fields read-only except 'create another button of registration '.

  Also, I have a lov in my custom page, when the user selects invalid values, error messages will be displayed. My problem is same after displaying the error message, the user has the option to navigate to the order of the day and enter data and submit. How to prevent the user to navigate to the order of the day if the value entered is not valid.

  Please suggest your ideas.

  Option 1: Add a controller to the dynamic region and ad whereclause LOV to limit the LOV query, so that it will not allow the user to select the 100.

  Option 2: The LOV (if required), just remove the value of the element LOV LOV action, based on the State.

  I hope this helps.

  See you soon

  AJ

• How can I navigate to a new page when after - submit proc process running

  I have a lengthy procedure and would like to provide users with an animated gif to indicate the progression that updates a line of description to indicate the current step in the process.
  
  Currently, I have a few pages to this application which is called a stored procedure in a package that performs a long-term process that updates the progress of a table. These processes have a single parameter argument. In this case I call the procedure via the Task Scheduler as part of my process of the after Submit and page navigation Jump to another page that shows a graphical representation of the % complete based on the progress updates in the table and refreshes every 5 seconds until the work is finished. It works very well.
  
  I use now on an issue where I have a whole more complex process, with a number of parameters. To solve this problem I used the same process above, however, I have everything first to check to see if the process exists in the Task Scheduler, otherwise I create. Then, I put all the settings and tell the Task Scheduler to run the procedure. This should work as for the process, that I am running on other pages, however, on this page where I have several parameters and send a command execute rather than an immediate execution on the creation of jobs, the system runs all the work before executing the part of the page, so the end user is stuck on a page of hanging with no feedback user two minutes after pressing send.
  
  I'm looking for how to call the procedure and branch run so a progress screen is visible. I'm not committed to using Task Scheduler, if there is a better way.
  
  Any help is greatly appreciated.

  Hello

  Follow these steps to start the work (guess you have defined employment)

  dbms_scheduler.set_job_argument_value (,,);
  dbms_scheduler.set_job_argument_value (,,);
  dbms_scheduler.set_job_argument_value (,,);
  dbms_scheduler.run_job (job_name => < job_name=""> , use_current_session = > FALSE);

  http://download.Oracle.com/docs/CD/B28359_01/AppDev.111/b28419/d_sched.htm#i1013568

  CITY

• Skillbuilders modal page - message of success without close in Internet Explorer

  Hello
  
  I use Skillbuilders modal plugin on Apex 4.1 page.
  The plugin works fine in all browsers except in IE, where I am unable to close the success message by clicking on the 'x' in the upper right.
  I'll explain later.
  
  I have a report on, say, page 10, and I am to edit each line in a modal page (page 11). When saving the changes, closes the modal page and a success message appears on page 10. I see the message in Firefox and IE, however, I am unable to close it in Internet Explorer.
  
  When I inspect the success message using Firebug in Firefox, I see that I have:

  <div id="messages" style="display: block;">
  <div id="success-message" class="success">
  <img class="remove-message" onclick="$x_Remove('success-message');" alt="" style="float:right;" src="/i/delete.gif">
  Action processed.
  </div>
  </div>

  However, when I inspect the message of success in IE, I see:

  <div id="messages">
  </div>

  The success message is displayed on the page, but it does not appear in the source code of the page and clicking on the 'x' is not shut it down.
  
  
  I have tried with several themes, the problem persists.
  
  Does anyone have an idea what could be the problem here?
  Someone had a similar problem?
  
  Thank you!

  I've been watching, kind of empty that indeed the semicolon does not say. Didn't know who he was and then took the trouble to test it in the model more as he ate so much time already. Who should teach me...
  Anyway, I was puzzled, too. Apparently, this has to do with IE8 and jQuery, adding code to the document, whether .append or before. The element is just there and everything, but the onclick does nothing. Why it worked after editing it? Probably because that IE was able/willing to pick up the attribute.
  I've tinkered with it again and again, trying to find something, Googling, but couldn't really find a cause or difficulty. Put the anchor? Nope. OnClick reacting only to the second click? Nope. Just do an alert? Nope. Just nothing works at all. I just dropped. IE8 is a headache to try to 'fix' in his manners, you're worse off.

  Ultimately I fixed it another way. My model is different from yours, but the technique is the same.
  I removed the onclick attribute of the region of success message, about the two templates. If it doesn't work I'm not there (good riddance too). I changed the href attribute too by putting just "#", which is probably just me being pedantic. This is my result success message template:

  
    
  
      
      
      
  
        #SUCCESS_MESSAGE#
      
    
  
  

  To be able to close it, I added some javascript in the page header:

  This is much like a dynamic action with a scope "on-line". I didn't want the trouble of having to put an action dynamic on every page and is the reason why I made this way. It works fine in every browser too, then Bravo.

  Your solution works equally well on, that's all. I wouldn't call it a 'solution', because he did not initially anyway. I wouldn't look further and stick to what works best for you. :)

• I've added Edit &gt; Preferences &gt; Quiz &gt; success or failure &gt; if Grade by the way &gt; to go to the next slide

  Unfortunately, it does not work. The reading frame is rest on the declaration page quiz. Please, can someone tell me what I do wrong?

  Should be a continue button on the Quiz results slide.  The actions of success or failure for the general quiz performed only AFTER that the button is clicked.  If you go to the next slide when they should be at least a slide AFTER the Quiz results slide.

• Replace the legends of success or failure with images.

  Hello
  
  Can I use legends of success and failure for clickboxes or buttons.
  
  Is it possible to display an image of success or failure in place?
  
  Brian

  Hi Brian

  I saw your post earlier today. Unfortunately (actually fortunately in this case) I was unable to answer, because I was in the middle of the realization of a class of Captivate. At that time, I probably would have advised that it is simply not possible.

  Tonight, after reviewing things again and passing through the messages of today, I almost responded again with a resounding no. Then I suspended and figured it out. That thought, was how these subtitles are really just still images. Where the text is superimposed background images. Then, I remembered that when you select the image used for the background of a legend, a choice appears on the list that allows you to navigate to a desired image. So I tested and here's the deal.

  Double-click the legend of feedback
  Select the text that has been provided and delete
  Click the type of legend drop-down and scroll the selection to the end. You should see .
  Select the item and dialogue should appear immediately. It should contain 'Open' in the title bar.
  Note that this dialog box is programmed so that the images in list in. In BMP format. Don't let this discourage you if your image is in a different format. Perhaps. GIF or. JPG. All you need to do is navigate to the location where your image is, and then in the file name field, type *. GIF or *. JPG and press ENTER to display images of this type.
  Click to select your image and click on the OK button.
  Now, your image must be pulled in the slide, but it seems rather odd. This is because it has been extended to the size of the legend. Do not alarm you. All you have to do is to adjust the size so the image seems appropriate. It is enough to click on one of the corner resize handles and try to make the image as small as possible. You will notice that you cannot resize the tiny image what she really is.

  And there you have it!

  Sincerely, I hope that's what you're looking for and it helps out you. Rick

• How to make the record value appear in the "Message of success of the process?

  Hello
  
  I have a page called process "insert" "On submit - after calculations" and Validations with the look of PL/SQL codes such as:
  
  Start
  insert into abc (col1) values (: P7_col1)
  end;
  
  In the "Message of success of the process", how can I include the record value (ie: P7_col1, say, it's "Item1") in the message so that it could look like:
  
  Item1 has been added successfully.
  
  Thank you very much
  Helen
  
  Published by: user4503001 on July 21, 2009 11:20

  Helen,

  Substitution variables must be written in capital letters, always.

  Scott

• Printer works only after the reboot or shutdown

  I use win xp sp3 computer. My only works only after the restart or shutdown. If I reinstall the printer driver, then it will work. I have reinstall win xp but similer happen again. I scanned my system with kaspersky. But no change. I need a permanent solution. Please help me...

  Hi Pierre,.

  1. what exactly happens when you try to use the printer?

  2. you receive messages or error codes?

  3. What is the brand and model of your printer?

  Method 1:

  You can try to start the fixit printer and check if it helps:

  Diagnose and automatically fix problems printing and printer

  Also see the article and check:

  Resources for the resolution of the printer in Windows XP problems

  Method 2:

  You can check the event viewer to learn more about the problem.

  Procedure to view and manage event logs in Event Viewer in Windows XP

• I get the error message "security log is full, only an administrator can log in to solve the problem."

  On a windows machine XP after putting in place the machine administrator and when trying to connect as a user, I get the error message "security log is full, only an administrator can log in to solve the problem." I know how to solve this problem by going to the event viewer, by selecting the security log and by setting the journal to "ignore the events as needed", but I would like to create a script that will do this automatically for me.

  so far my research revealed that the value of the registry key [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Eventlog\Security] "MaxSize" controls this setting and changing the value default DWORD_VALUE to 0 x 01000000 to 0 x 00000000, change is possible. Well, when I did it in regedit, nothing has changed in the security log properties, the default setting of 'remove older items after 7 days' remained the same.

  Can someone tell me what registry key, I need to change in order to make this change? Keep in mind im trying to include this in a script.

  Thank you

  Hi teddorosheff,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the following forum.

  Windows Vista IT Pro

• The event GWX.exe messages must remain on the computer after you made the reservation for a copy and agree to receive their copy?

  The event GWX.exe messages must remain on the computer after you made the reservation for a copy and agree to receive their copy?  It certainly is learning to be OVERLOAD on these messages and would like to know if it is OK to remove them and what to do to STOP these messages.  I asked the program and I've been accepted/approved/reassured that will ship a copy - JUST WANT TO KNOW IF I CAN REMOVE THIS sort of THINGS NOW, OR should she REMAIN ON MY COMPUTER?  It's the only question I have that needs to be answered. Thank you

  ybliku2

  Since early may, Microsoft began providing updates prerequisite for these systems for the upgrade. Known as the get Windows 10 app (GXW) this KB update installs the mechanisms to verify your system readiness and download Windows 10 through Windows Update. Users will see a notification added to the taskbar allowing users of the availability of the operating systems and of the possibility to book the update and download automatically on July 29^th 2015.

  You can also download Windows 10 as one. ISO file and do the upgrade manually:

  How to: upgrade previous versions of Windows using the file ISO for Windows 10

• If I opened a word from an email document and made some success publishing and only save... where is it?

  If I opened a word from an email document and made some success publishing and only save... where is it?

  I guess that and still say in your email.

  You can download the doc and then edit / add content.

  Then use Save as and rename it to reflect the change / date of the change.

  Then attach the new doc to a new e-mail message.

• I'm currently developing the feature keys on my MacBook. In the process, he asked that I enter a code sent by message to a phone number (only the 2 last digits are revealed) that I do not have access to.   How can I fill the activation?

  I'm currently developing the feature keys on my MacBook. In the process, he asked that I enter a code sent by message to a phone number (only the 2 last digits are revealed) that I do not have access to.   How can I fill the activation?

  See "change how the new features can be approved" here:

  OS X Yosemite: Configure iCloud keychain

  As you can see, this allows you to change the phone number.