Custom Setup problem Blog Post Dates

Similar Questions

• I did a blog in adobe muse and his now adjust it in British Colombia, but I can't seem to change the date format of blog post?

  I did a blog in adobe muse and his now adjust it in British Colombia, but I can't seem to change the date format of blog post?

  My ideal date format would be / 28, Oct 2015

  can anyone help? I don't know that I can handle the {tag_postdate}

  You can use something like this in the post or poster list: {tag_blogpostday}, {tag_blogpostmonth}, {tag_blogpostyear}

• 'Next Article' with Blog post

  One of my clients asked me to add a 'next Article' and the 'Previous item' buttons for the blog. The concept is if a person reads a blog post (the current don't post not a list of posts) when they come at the end of the article, they can click on the two buttons. A single button they will be for the next most recent post (if the position is the most recent, then this button is not visible) or they can click on a button to be taken to the previous post (by date).

  To my knowledge there is no way to do this by using the tags or out-of-the-box modules. My question is has anyone at - it an any idea javascript which may be able to produce what I would do?

  All ideas are welcome.

  Note: I can manually to add to every post, but I'm looking for a way to have automated it.

  I finally found a solution that works. It requires some knowledge of HTML/javascript, but I'll post the example that I use with commented code. There may be better ways to do this, but this is the best I came up with that.

  First we need to create a blank page that will list all the blog post and the data we want to. On this page, you can insert this code:

  {"module_blogpostlist, 12345, 1000, template="/settings/blog-list.tpl "}

  The module above could be broken down like this:

  {module_blogpostlist, BLOG ID, NUMBER OF POSTS, path to THE CUSTOM MODEL}

  In other words, we use the module blogpostlist for a certain blog (BLOG ID) then we list all of the blog post. I put it to a very high number, I want all the blog post on a single page. Can I set a custom template for the layout vs the default layout.

  Note: Remember in your head to this page, you need to:

  It's so this page does not appear in the results of the research.

  Now that we have the page layout to set the custom template that we use to list the information that we need. Open a code editor, add the following code, and then save them in a .tpl file.

  {tag_itemurl_nolink}

  {tag_blogposttitle_nolink}

  To break down each line:

  Line 1: This is the Blog Post Id of each blog post.

  Line 2: This is the URL of the blog.

  Line 3: This is the title of the Blog post without a link.

  Once the above files are created and uploaded, it is time to add the code for the blog itself.

  Open up the layout of the Blog Post details:

  • Admin console: Site manager > Module models > Blog layouts
  • SFTP & develop Mode: /Layouts/Blog/post.html

  First, he must insert where we want the buttons next and previous to appear. I add the following code:

  
  

  Basically, I'm floating each div to the left or right, then clear the float with a break. All this is in my CSS. The important part is the class of next and prev will be used for the button that will make the link to the respective message.

  Now for the Javascript. I have add this below all the rest of the presentation of details of Post of Blog. I commented on each line of javascript in order to see what I'm doing. This method assumes that you use jQuery, that this has been tested with jQuery version 2.1.1.

  If (nextLength > 0) {//If statement is so we do not show a 'Next Post' button when there is not a next post.

  Insert HTML for the next Post. Can be changed to match your site code.

  $(«.next») .html (")

  Next Post

  « + nextTitle + »') ;

  }

  If (prevLength > 0) {//If statement is so we do not show a previous 'Post' button when it does not have a previous post.}

  Insert HTML for the previous Post.  Can be changed to match your site code.

  $(«.prev») .html (")

  Previous post

  ' (+ prevTitle + ');

  }

  });

  });

  Now you have a Next and Previous Post buttons.

  Hope this helps others.

  -Lynda

• Error of Facebook, what can I do? Resource://jid0-wpch2liwmumjc8av1vwejwvgjbi-at-Jetpack/qclean-remove-Facebook-ads-suggested-pages-and-posts/data/qclean.js:53

  Facebook maintains the gel, a problem caused by this script resource://jid0-wpch2liwmumjc8av1vwejwvgjbi-at-jetpack/qclean-remove-facebook-ads-suggested-pages-and-posts/data/qclean.js:53

  I tried many solutions suggested, nothing works. Please advse. Thank you.

  Ed

  Hello ed, this error is caused by the qclean addon that you have installed. Please disable or delete or report the problem to the author of the extension...

  Disable or remove modules

• Problems with the date and time - have to reset the date & time on reboot

  original title: problems with the date and time

  Whenever I turn on my computer (Windows XP 2002) I click on F2.  Then I re - set the date and time it occurred in January 2006 1 h every time I have turn off the computer.  Can someone tell me what I need to do?

  You need to replace the battery in time clock (RTC) real of your computer.  It can also be called the CMOS or BIOS battery.

  Many computers, this battery is an inexpensive CR2032 button available in almost every pharmacy corner.  There are, however, some computers (especially laptops) that require a different (and probably more expensive) battery.

  Whatever the expense, almost all of these batteries are easy to replace.

  To get help, post back with the brand and model of your computer.

• Blog post content lost paragraph breaks

  Hello

  I encounter a weird problem that I can't figure out yet. I added some blog posts and in the content of post window they show up as expected and tagged correctly (Fig. 1). However, when I find the post in the blog, everything is put together (fig. 2). Any thoughts on why this might happen? It was like that before I even did something extra style on the blog site. Any help is greatly appreciated.

  FIG. 1

  

  FIG. 2

  

  I thought about it.  Commenting out margin: 0; of the class p in my global.css fixed.

  body, div, dl, dt, dd, ul, ol, li, nav, h1, h2, h3, h4, h5, h6, pre, code, form, fieldset, legend, entry, butto n, textarea, p, blockquote, th, td, one

  {

  / * margin: 0; * /

  padding: 0;

  border-width: 0;

  -webkit-transform-origin: left top;

  -ms-transform-origin: left top;

  -o-transform-origin: left top;

  Transform-origin: left top;

• Simple blog post

  I am trying to add asinglre blog post to a web page outside the blog page

  It should look like this.

  "

  Blog title lorem ipsum

  Blog post text lorem ipsum lorem ipsum lorem ipsum lorem ipsum lorem ipsum lorem ipsum lorem ipsum lorem ipsum

  Lorem ipsum lorem ipsum lorem ipsum lorem ipsum lorem ipsum lorem ipsum lorem ipsumlorem ipsum lorem ipsum

  Lorem ipsumlorem ipsum lorem ipsumlorem ipsum lorem ipsum lorem ipsum lorem ipsum lorem ipsum lorem ipsum

  Lorem ipsum lorem ipsum...

  Continue reading

  "

  and wen of the person click continue readfing it redirects to the blog post on the blog page.

  How is that possible?

  is there any tag who does that and who works next to the blog page?
  

  Ok! Well, do as I suggested: create a category called recommended and mark desired feature. Then you export all the blogs by category and select feature. If you do not problems with the blog layout, simply create a personal template .tpl for this case. This is how we usually solve this problem.

• How to fix BC blog post meta < title > and < description >

  BC-blog < title > and < description > shows (seo) list of the bar side/post - but does not show in the post through site menu NAV page.

  The blog post title and description appear corectelly when you click on the sidebar of the post list.

  It must use the module layout list.html, which I set up with:

  < html >

  < head >

  < title > {tag_blogpostmetatitle} < /title >

  < meta content = "description" name = "{tag_blogpostmetadescription}" >

  < / head >

  < body >

  On the bar side/post list

  Title and Description show correctly here:

  https://cameocoinsonline.worldsecuresystems.com/cameo-coins-blog/how-to-buy-and-sell-gold-et-Argent-lingots

  The problem is:

  When you click the menu nav to 'blog', it does not show correct title and description.

  Since the blog through nav menu page

  Title and Description are not correctly here:

  It shows the name of the blog (blog of cameo parts) instead of the name for the post.

  https://cameocoinsonline.worldsecuresystems.com/cameo-coins-blog

  Please notify

  Thank you

  Oh, ok.

  If you don't put in a title and which is empty then it will return on behalf of blog. Even with products on electronic commerce. Don't put in a product title and it will display the name of the catalog.

• ESX 4.0 problem with post install in kick start.

  Hi all

  I have problem with writing a script for starting a esx4. Everything works OK until I try to enable vmotion. my kickstart script looks like:

  AcceptEULA

  keyboard us

  AUTH - enablemd5 - enableshadow

  1. Names of canonical readers:

  clearpart - overwritevmfs - drives = mpx.vmhba0:C0:T0:L0

  1. Uncomment to use the first detected disk:

  #clearpart - firstdisk

  1. Uncomment the esxlocation line and comment out the clearpart

  2. and physical partitions to do a non-destructive reinstall.

  #esxlocation - uuid = 2be8278c-007 b-4389-947f-0f6a72a23036

  install the cdrom

  rootpw - iscrypted $1$ fh40NuLv$ jo1FUrvpfHEXHINgANoEj.

  time zone hours utc-"Poland".

  network - addvmportgroup = true - device = vmnic1 - bootproto =-= 192.168.10.10 static ip - subnet mask = 255.255.255.0 - Gateway = 192.168.10.1 - nameserver = 192.168.10.1 - hostname = test

  part "/ boot" - fstype = ext3 - size = 1100 - ondisk = mpx.vmhba0:C0:T0:L0

  1. Uncomment to use the first detected disk:

  #part ' / boot ' - fstype = ext3 - size = 1100 - onfirstdisk

  the game 'none' - fstype = vmkcore - size = 110 - ondisk = mpx.vmhba0:C0:T0:L0

  1. Uncomment to use the first detected disk:

  'none' - fstype = vmkcore - size = 110 #part - onfirstdisk

  part "Storage1" - fstype = vmfs3 - size = 8604 - grow - ondisk = mpx.vmhba0:C0:T0:L0

  1. Uncomment to use the first detected disk:

  #part 'Storage1"- fstype = vmfs3 - size = 8604 - grow - onfirstdisk

  VirtualDisk "esxconsole" - size = 7604 - onvmfs = 'Storage1.

  part 'swap' - fstype = swap - size = 600 - onvirtualdisk = "esxconsole".

  the part "/ var/log" - fstype = ext3 - size = 2000 - onvirtualdisk = "esxconsole".

  part ' / ' - fstype = ext3 - size = 5000 - push - onvirtualdisk = "esxconsole".

  % post - interpreter = bash

  esxcfg-vswitch - L vmnic0 vSwitch0

  esxcfg-vswitch - D "VM Network" vSwitch0

  -A ' 64 VLAN' vSwitch0 esxcfg-vswitch»

  esxcfg-vswitch - a "iSCSI" vSwitch0

  esxcfg-vmknic - an "iSCSI" 255.255.255.0-i 192.168.10.11 - n

  esxcfg-road 192.168.10.1

  esxcfg-road - a by default 255.255.255.0 192.168.10.1

  service mgmt-vmware restart

  sleep 5

  / usr/bin/VMware-vim-cmd hostsvc/vmotion/vnic_set vmk0

  service mgmt-vmware restart

  When I run the command/usr/bin/vmware-vim-cmd vmotion/hostsvc/vnic_set vmk0 after installation in ssh allows vmotion, but when it is run by Setup in the % post section that's not what I'm doing wrong?

  Concerning

  Zbyszek

  I did a startup script and it started working.

• How to put a single metadata on each blog post?

  Hello

  How can I put an a single metadata on each blog post referencing?... There is a SEO Meta data section where we can post Post title and job Description, but it does not work... It does not show on the site during the source control.

  Is there another way to do this?

  Thank you

  Hernan

  You can't put it in the model in mind because these tags will not be made outside the layout.

  You must make them available to the mail and wrapping them in a head tag.
  BC will remove the head tag and shoot the meta in the head of your template.

• Blog post details - module CSS

  I inserted a blog in a customers Web site and there is a random horizontal rule appears.  Now, I wouldn't mind that, except that its been blocked my text.  I have not really dug / got familiar with all that is in the modulestylesheets and was wondering if anyone knows where and how I can go to control this.

  Problem: http://www.screencast.com/t/zyPmPF67fd

  Real location: http://www.visionquestdallas.com/BlogRetrieve.aspx?BlogID=14162

  Clues are appreciated!

  Thank you very much.

  Hey there,

  Best option is to change this:

  .blog-post h2.post-title {   border-bottom: 1px solid #ccc;   font-size: 18px;   margin: 0;   padding: 0 0 3px; }
  

  To do this:

  .blog-post h2.post-title {   border-bottom: 1px solid #ccc;   font-size: 18px;  padding: 0 0 3px; }
  

  It has a margin in there it's ruin, which take off and he comes straight

• Problem with field date

  Hello
  I have problems with the dates. I have a datagid which fills the XML values. Some examples of dates in the xml document.
  (1) 2008-08 - 05T 00: 00:00Z
  2) 2008 - 07-22 T 00: 00:00Z
  (3) 2008-08 - 04T 23: 00:00Z
  4) 2008 - 07-11 T 11: 18:20Z
  
  I have the function that is called when an element is clicked on the data grid. This function is supposed to take the above date and the date of the datefield in a summary Panel. I continued to get xmllist@23232 to date conversion error if I tried to bind the property of selectDate datefield in dataGrid value.
  
  I've seen examples of datefield defined using a date object. So I stored the date above in a string. Screens of the string data fine only thing is a the componenet (T) of time as well. So I split the string using the string to split the function and the use of "T" as a separator. The problem is the 2nd and 4th dates in the above examples worked well and display perfectly in the datefield.
  
  The 1st and 3rd dates however wrongly displayed. I've posted the table stored items from split, which found that the date of the first one 2008-08 - 05T 00: 00:00Z rose in 2008-08-06 instead of on 2008-08-05
  and for 2008-08 - 04T 23: 00:00Z rode in on 2008-08-05 instead of 2008-08-04. I checked the string that was storing the data grid data and who has been properly storing the value.
  
  any suggestions?
  
  see you soon
  Aerts
  

  sorted,
  lacked a bit of caffeine. I had another string of storing a value different date and because of my stupidity, I tried to parse this string and get the two different dates.

  see you soon
  Aerts

• Problem with the DATA types, in a UNION

  Hello
  I m trying to disply a custom message when no data found using the structure below. Unfortunately I ve you have a problem with the data types I im trying to union
  I tried different types of data in the 2nd SELECTION tool but the rest of the problem. Help, please.
  
  SELECT HOSP_NAME 'HOSPITAL' DOC_SUR 'NAME', 'NAME' DOC_NAME, d.DOC_ID ID, diagnosis
  H., DOCTOR d, (SELECT d.DOC_ID, COUNT (d.DIAGN_ID) diagnosis
  OF PATIENT_DIAGNOSIS d
  GROUP BY d.DOC_ID)
  WHERE diagnosis > 1
  
  UNION ALL
  
  SELECT TO_CHAR ('test'), TO_CHAR ('test'), TO_CHAR ('test'), TO_CHAR ('test'), 0
  OF THE DOUBLE
  If NOT EXISTS (HOSP_NAME 'HOSPITAL' 'NAME' 'NAME' DOC_NAME DOC_SUR, d.DOC_ID ID, diagnosis
  OF ΝΟΣΟΚΟΜΕΙΟ h, ΙΑΤΡΟΣ d, (SELECT d.DOC_ID, COUNT (d.DIAGN_ID) diagnosis
  OF PATIENT_DIAGNOSIS d
  GROUP BY d.DOC_ID)
  WHERE diagnosis > 1);
  
  
  ORA-01790: expression must have same type of data, matching expression
  01790 00000 - "expression must have the same type of data, matching expression.

  DOC_SUR 'NAME' DOC_NAME 'NAME', ID d.DOC_ID, HOSP_NAME "HOSPITAL", diagnosis

  What is the data type for these columns

  To_char('test'), to_char ('test'), to_char ('test'), to_char ('test'), 0

  What you're doing here 'test' is already a character. Why do you use TO_CHAR?

• Removal of the custom by TestStand 4.0 data types

  Hello! I use the custom in my TestStand sequence data type. This data type is derived from my own control and is a huge cluster of clusters. It is created in a file of sequence (and not in any *.ini). By changes in the sequence, it becomes necessary to delete existing custom data type and create a new one due to changes in the custom control. How can I remove custom data types?

  I n ' found any possibility to do in Teststand menus. It was not so important, if the custom data type was not so huge.

  Thank you in advance for your answer - maybe it's a workout if no direct solution?

  Hello

  Just see the Type of data in the file in the sequence and highlight the custom data type it, then delete it.

  (Please make sure that you do not have variables defined in your file of sequence that still use the data type you want to remove).

  Concerning

  Ray Farmer

• Problems with the data connection

  Hello
  I bought a Z3 Compact Xperia on December 10, 2014. I live in Italy and I use Vodafone as my everyday.
  I got a SIM card replacement nano with LtE capabilities just to get the phone in the new fast network. The problem I encounter is that, since on January 13, 2015, I had some problems with the data in mode 3 G connection.
  So far, I used my phone normally, then I tried to send a text message with WhatsApp and phone stuck with the clock icon in the lower corner of the bubble of the message. I thought it was a temporary network problem but I'm not sure about this.
  I live in a small town where the coverage is really good, either in 3G and LTE. I tend to use the 3G because it uses less battery and it does not affect my 4G data plan.
  Th issue, it's that if I do a speedtest when I feel that network glitch I have a ping, but with very good download speeds up to 2000ms.
  The problem is that I believe that this is not a network problem because my mother has a phone HtC One S and runs vodafone without problem even when I'm having the glitch.
  I tried to reset the phone to factory settings, but it did not help.
  In LTE / 4G I do not experience this issue. In fact, I think if there is problem need a phone related software because the antenna works very well.
  If it doesn't I'll try to contact ad Vodsfone then I'll send my phone for the helpdesk if Vodafone tell me that the question is not on their network.

  Thanks in advance for your help.
  Simone

  It's pretty strange, double check the APN settings and contact EE in this regard.