How to connect my Equium A300D on TV?

Similar Questions

• How to connect my Equium A100 to the TV?

  Help...
  I'm not very good with all this tech stuff... my age I think! ........... I'm trying to connect my Panasonic TV to my PC with a VGA cable, but get a message "No Signal" on my TV... I was told to try a ' video cable, but why then I have a VGA port?
  All I want to do is look at things on my TV from my PC... Any help out there please, would be welcome.,. My laptop is an Equium A100...

  Your TV's VGA port?

  VGA port is mainly used for external screens.
  To the TV, you can use S-video cable. When you connect your laptop to the TV allow certain channels and port on your TV.

  Please note: both connections will transfer the video signal only.

• How to do a clean install on my Equium A300D

  Hello

  I got an Equium A300D-13 x which runs vista Home premium. I bought it to PC world a few years ago. I want to sell it and I want to do a clean install to put it back to its original state. I removed all my data on an independent hard drive already. I read the virtual manual supplied and he said to start pc and press the F8 key to access the Advanced Boot Options menu and then do a repair or something? I'm sure it will be clear if I am still here! I've always been able to remember another high office I've owned to enter in safe mode using F8... This seems a little weird. Can someone please advise.

  I also had a 'local disc Q' appear in the MY COMPUTER section about two months ago. I don't know how it got there and I do not have the permission to access. I tried to change the owner of the file, but I'm not allowed? Can someone explain this please?

  I'm afraid that the security on my laptop has been violated somehow, I'm having other problems that relate to some very technically accomplished of not nice people.

  Hello

  Let's start with the installation of the OS.
  How to install the original recovery image using the HARD drive recovery mode is described in http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm

  To check please, read carefully and try to make the new installation of operating system, following the steps described.

• How to connect Equium A100-306 to HDTV?

  Hello

  I was wondering if it was possible to connect my Equium A100-306 to my HDTV using a VGA cable component? The laptop has the chipset intel 945g.

  Thank you.

  Hello

  You cannot convert only a RGB (VGA) signal to component (Y-Pr-Pb), since you will need a converter that transforms the signal vga to this component.

  Which means that you also a converter for cable that could be very expensive. But if you've got components that you should be able to display an image on a device that has entry components. Don t think you will be able to run the HD-ready or full HD on a HD TV, since a HD signal requires an HD port on your computer and a disk hard taking supported system with better graphics chip and then a chipset intel.

  Welcome them

• Equium A300D - how to save on another hard drive?

  I just got an alert Tempro my 'C' drive is full of more than 75%. My laptop (Toshiba Equium A300D) seems to have 2 hard drives, "Vista C:" label, and an another 'E:' labeled 'Data'

  The 'C' drive appears currently 31 GB on 117 GB of free, when the disc of 'E' indicates 108 GB GB 113.

  Is it possible that I can save documents to the disk 'E', which has a lot more free space, while retaining my existing directory structure? At the present time, all my diirectories and its subdirectories, including Vista 'Documents', 'Music' folders etc are on the 'C' drive, and I really don't want to end up with two sets of directory structures.

  Hi BlissC

  You can save your documents, photos, etc. on the second partition. So you can save disk space for applications that you install on the first partition.

  Just right click on each file that is stored in your user directory (e. g. music, documents, photos, downloads, etc.), and then choose Properties. There you can change now where the file should be saved.

  I also moved my documents on the second partition. :)

• Equium A300D - 16 c turns on but the screen does not show anything / remains black

  Hi, I have a laptop Toshiba Equium A300D - 16 c.

  It was fine until now...

  When I press the power button, my laptop turns on but the screen remains black / off.
  The indicator disk HARD is not Flash or anything... (in case that helps)
  I also tried to remove the battery, hold the power button for 30 seconds and then reconnect the power cord... Same laptop turns on but the screen is black.

  I tried to connect my laptop to my PC using a HDMI cable screen, but without success... Laptop turned on but monitor my pc showed nothing.

  I have not changed anything inside my computer laptop or unscrewed it.

  PS:
  Quite often, I kept my laptop on the bed/pillow it may have something to do with overheating or something.

  How did I get to this point:

  Yesterday, my laptop was fine, there was nothing wrong with her... I turned off during the night, but when I tried to turn it on this morning it is where I have faced this problem.

  Any help would be appreciated.

  Thank you very much
  Rejanu.

  Long ago, I had similar problem on my old Satellite. CPU was faulty. After replacing the CPU, everything was OK again.
  I put t really know what to say.
  Maybe you should contact Toshiba and let check your laptop. They have diagnostic tools and may know what is the problem.

  What do you think?

• Audio driver for Equium A300D not working or projection

  No idea how it happened to my computer is a new only 1 week and sound works perfectly well.

  All of a sudden it will use in reading and on computer but not in the record I could play to others on another program for example.

  Equium a300d on vista

  I tried the audio drivers from the Toshiba site, but nothing seems to work.

  Please help :(

  Hello

  If he worked several days ago then I guess this must be a matter of software
  I really put t understand what you exactly do but try to overthrow the BONE until the point of time at the beginning, when this sound function worked correctly.

  A question:
  Did you also check the sound settings in Device Manager?
  Select this check box.

  Go to devices-> sound Manager and check the second tab called record.
  There you have to right click and mark the two peripheral options see the disabled and do not show not connected peripheral.
  Then mark the new recognized audio devices and enable it.

  Further, you should try to update the BIOS because a lot of strange problems can be solved by the BIOS updated.

• Equium A300D - has built in Bluetooth?

  Hello

  I want to know if my Equium A300D computer laptop (PSAK2E) has built in bluetooth hardware or I have to buy hardware for her?

  If this is not what is the best material for the laptop?

  If this how to activate it, I installed the bluetooth stack, but to complete the installation it asks me to "connect the bluetooth device?

  Thanks in advance for your help

  If you A300D - 13 X, I must inform you that this laptop model doesn t have BT modules.
  Best BT and the simplest solution is to buy small stick USB BT.

  Configuration is easy and you can use it when necessary. If you don't need connectivity BT simply remove key USB BT of the system.
  These USB keys are not expensive and you can buy it in every store of the computer.
  All that s.

• Equium A300D - 13 X (PSAK2E) - microphone and headphone driver

  For the first time, I reinstalled Vista Home Premium on my laptop. I installed most of the drivers from this site.

  All that I Can can't FIND work there (same camera) except the sound, but I have a driver for my HDaudio. I don't know even what audio device I.
  I mean Vista found ' default device hd audio "and I by speakers and built in mic works but I when I connect before microphone or headset are not and built-in speakers don't put on mute.
  What I've done wrong?
  Can anyone point me to good drivers or how to operate the front Sockets?

  Hello

  Equium A300D was equipped with the same audio chip Conexant CX20561 as another notebook series. That is to say Satellite A300D.
  You need the Conexant audio driver. You can find it on other portable pilot areas

  Hope I could help you.

• Re: Equium A300D - 13 X - boot problem

  Hello

  I can't initialize problem. Powers of phone on ok, with a few flashes of HARD drive as it tries to start. But no sounds other than the kick, fans have tried all the usual things like FN/F8 to enter safe mode, also cold start battery and network opens. Power button down for an all black screen minute etc etc, but still no screen or emits a signal. I suspect a power supply problem and have tried with different loader but no effect. Laptop is a 4 year old Toshiba Equium A300D - 13 X everything worked fine but I recently renewed keyboard, screen bezel, Mo media Ribbon, power/Ribbon button, Mo.

  I thought I might have left some cable detached so all reopened and checked, but everything is correctly fixed I think.

  Any help would be greatly appreciated.

  Thanks Bob.

  Hello Bob

  It is not easy to be objective with this problem. On one side you have disassembled your laptop on your own and we don t know if everything was done correctly. I m also not technician and each laptop disassembly has been a success.

  I put t really know what to say. Try to talk with someone who can help you with this and check if everything is OK. Small error as causing electrical circuit can damage the electrical components of the motherboard. Try to check the display cable connection.

  Have you tried to connect the laptop to the TV and check if all come to this?

• Windows installation interrupted as Equium A300D stops itself

  Hi all

  I've had my Toshiba Equium A300D for 2 years now. Meanwhile, it works normally, sometimes stops himself maye because it was too hot.

  Recently, he tried to install updates to Windows Update, but never successful. I left the computer to update all night and there was 2 of 12 updates... all the time so I always had to shut down the computer by pressing the power button.

  I was unable to change the setting to update Windows automatically, because every time I tried to do it froze. Most of the other commands became even viewing photos that do not meet.

  It was until my computer could not connect to a certain wireless network, while other devices may I decided to reinstall Windows completely. He was installing normally but it got too hot and the computer closes again!

  I tried to install again and he was arrested again, but I got up in the final phase of the game when I turned it on again, it was always 'finihing the installation may take several minutes. lease do not interrupt or shut down the computer. Let him over several hours, but he did not move to a different stage. Before the computer shuts down, I think I arrived at the scene after that.

  I tried to press F8 to start a new installation, but he's only got in this screen.

  What can I do?

  Please help me! Thank you very much in advance!

  I am in Germany at the moment, but I live and I bought this computer from the United Kingdom.

  ttd500

  Hey,.

  You can test Windows with Toshiba Recovery disk installation, please?

  The disc usually contains only drivers and software prétestées so installation shouldn't t be a problem because it s pre-tested software from Toshiba.

• Equium A300D-13 x - No battery is detected

  Hello

  Recently, I thought it would be time for me to buy a new laptop for my Toshiba Equium A300D-13 x from the current battery is so old, I get about 5-7 minutes to load off of him.

  So I looked online and shopped and the official Toshiba who were £140!, to remedy that I opted for a replacement which was about £20 (cheap).

  Anyway, the battery is the same exact battery toshiba model number official I have and that is the exact same voltage 10.8V. However the battery is not detected in the laptop?

  What is interesting is that the battery powers the laptop he just doesn't tell me how many remaining charge, I left. Also when it is plugged to the AC does not detect, it looks as if he is in charge the laptop as the clear meaning that the AC is plugged is on, and the battery indicator orange (charging)

  All I have this problem or know what I can do to fix this, as I don't have 140 pounds sterling to buy a new battery.

  Thank you.
  Aude

  Hello

  Have you had the same battery problems with the old, original battery?

  In my experience there are a several batteries 3 third-party but not all meet the standards even if the part number is the same

  But it seems that the battery is detected because the laptop can be powered on using the orange battery indicator battery energy you also show that the battery would be charged.

  However, I would recommend checking the version of the BIOS.
  My knowledge BIOS update might help to solve the problems with the battery.

  If it doesn't help you, I'd recommend testing other batteries that you can order directly from an ASP Toshiba in your country in this case you can be sure that your battery is compatible and works 100%.

• New battery is not detected on Equium A300D - 16 c

  Hello

  This is my first post on the site. I have a problem with a new battery on my Equium A300D - 16 c. (no battery detected)
  The original I got the computer died after two years of use, so I had to order a new one to replace. I received and he himself works very well, giving me a charge of 90 minutes. But the problem is that it isn't detected by the computer when I click on the power icon on the bottom bar of the screen, so I know how much time I have left with him. In addition, the orange light which indicates that the charge should go white whether full cost, mine just started orange flashing after awhile (what is when it is fully charged?).
  I got power to my computer a few minutes ago and he cut and I had to turn it back on, despite the battery in and it is complete free (as it has been in all day and the sector is since in periods of decent length).

  What can I do to fix this?
  Note that I'm not too good with computers, so anything can be better explain really, really just that I'm not the most skilled when it comes in this region.

  Thank you

  Purchased product Toshiba original after the part number, placed on the battery?

• Equium A300D - 16 c - battery not detected after replacement

  I have an Equium A300D - 16 c. The original battery was shot while I bought a stack of real PA3727-1brs 12. I have put in the laptop, it seems to load, but in the corner, he always says no battery not detected even if its load on. When I leave the charger it says remaining unknown.

  I tried the usual stuff to go into Device Manager and uninstall control compliant apci and still he has not solved it self. I've also updated my bios to the newest one. I just wanted to know what could I do so I can see how much battery is left, and if the laptop can recognize I..

  Hello

  Is this a battery Toshiba of origin of an authorized service provider?

  Usually, the new battery should be detected after the first start, I recommend that you charge the battery while the laptop is turned off. Start the laptop with battery only and check if she recognized properly s.

• Equium A300D computer laptop completely shutsdown randomly times

  Equium A300D computer laptop completely shutsdown randomly times
  It could be overheating.
  He really can not cope when you try to restore the i-phone - I was unable to do what the laptop is not long enough
  Reading and / or burning media is also a problem
  Any thoughts on how to fix would be appreciated

  You are right. It may be overheating problem.
  Mobile is also pretty hot when suddenly stops?

  In my opinion you should clean it.

  A friend of mine had the same problem with its A350. After laptop cleaning problem has been resolved. With other words, laptop has been disassembled and cleaned properly.