Custom step and the step execution.

Similar Questions

• This will remove all your custom settings and the settings of many extensions.

  Hello

  I was reading this article of knowledge and he says:
  "This will delete all your custom settings and many extensions settings."
  What are the custom settings?

  for example one of these and what else
  bookmarks?
  Add - ons?
  Top toolbar - Customize the toolbar
  Add on the toolbar
  Firefox/preferences
  Authorization Manager settings
  the new page open

  Corrupted preference file
  File preferences may be corrupt, Firefox prevents writing to it. If you delete this file, Firefox will automatically create another when it comes to.

  Here's how to delete the prefs.js file.

  This will remove all your custom settings and the settings of many extensions.
  Open your profile folder:

  In the menu bar, click the Help menu and select troubleshooting information. The troubleshooting information tab will open.

  In the section the Application databases, click view in the Finder. It will open a window with the folder of your profile.
  Note: If you are unable to open or use Firefox, follow the instructions for finding your profile without having to open Firefox.

  In the menu bar, click Firefox and select Quit Firefox

  Locate the prefs.js file (and, if applicable, the prefs.js.moztmp file).
  Delete these files and files prefs - n.js where n is a number (e.g. prefs - 2.js).
  If there is, remove the Invalidprefs.js.
  Restart Firefox. You should now have reset all preferences.

  Based on information from preferences not saved (mozillaZine KB)

  See also http://kb.mozillazine.org/Profile_folder_-_Firefox

  #1: there are too many pref for all kinds of adjustment which will offer a recipe of what you lose and how to keep certain parameters.
  It is possible to copy specific lines of a prefs.js to this file in another profile or restore some settings after deleting this file in the current profile folder.

  All the prefs that show as a user defined and appear in bold on the topic: config page are stored in the prefs.js file.
  
  This includes the changes you make and data Firefox itself and extensions store as data/parameters in a pref.
  It's

  #2,3: the localstore.rdf file stores the toolbar configuration and other data.

  #4: the current versions of Firefox shows the menu entry "Tabs" at the top menu ' display > toolbars "and" Firefox > Options ' and in the menus toolbar pop-up if the tabs are not in the default position on the top.
  
  If the notches located on the top and the menu entry is not available and you want to move the tabs under the navigation toolbar, then you have to toggle the pref browser.tabs.onTop false on the subject: config page.
  
  A restart of Firefox is necessary for updating the menu entry to display or remove.

  Note that this pref will no longer effect when the code Australis lands on the output channel (code Australis will probably land in Firefox 29).

  #5: see https://support.mozilla.org/kb/Clear+Recent+History

  Compensation of the "Site Preferences" clears all exceptions for cookies, images, pop-ups, installing the software, stored passwords in permissions.sqlite and other site specific data stored in content - prefs.sqlite (including zoom on the page).

  Deletion of cookies will delete all specified (selected) cookies, including cookies with an exception allowing you want to keep.

  #6,7: history of search bar is the story of the search bar (Google) on the Navigation toolbar.
  
  All recorded data to a form on a web page is included in the data in the form, but you can not separate and distinguish the two.
  
  Browsing history is the history of the web pages you have visited.

  • Form history control: https://addons.mozilla.org/firefox/addon/form-history-control/
  • Tahoe Data Manager: https://addons.mozilla.org/firefox/addon/data-manager/

  #8: session cookies are always kept in memory and never stored on the disc in cookies.sqlite
  
  You can only delete specific cookies manually in the Cookie Manager or leave cookies expire when you close Firefox to make them behave like session cookies.
  
  Cookies of other compensation will include all cookies and don't obey the exceptions that you have made.

  #9
  Data stored in storage DOM is not stored in cookies.sqlite, but it is generally stored in the webappsstore.sqlite file or possibly in the form of data in IndexedDB.

  • https://developer.Mozilla.org/en-us/docs/Web/Guide/API/DOM/Storage
  • https://developer.Mozilla.org/en-us/docs/IndexedDB
  • https://addons.Mozilla.org/en-us/Firefox/addon/Foundstone-HTML5-local-storage/

• user belongs to a domain and user does not belong to the local administrator or power users groups, or any custom group and the user is not part of the domain administrators group, but user show that it is admin

  WinXP
  user belongs to a domain and user does not belong to the local administrator or power users groups, or any custom group and the user is not part of the domain administrators group, but user show that it is admin

  I did a gpupdate/force and restart twice PC
  Yet, user indicate it is always admin when we right click on Start menu and see the possibility to open all users

  Hi elena_ad,

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public on the TechNet site. Please post your question in the below link:

  http://social.technet.Microsoft.com/forums/en/winserverManagement/threads

• LOV cascading if I don't have only one table with the customer name and the name of the product in the ADF.

  Hi Please help me how to use cascade, if I don't have only one table with the customer name and the name of the product in the ADF... I use Jdeveloper 11.1.

  For the client, I used customer VO with client list to fill but to populate the product that I use bind variable PrODUCT_NAME select distinct from TABLE where client_name =: bindCustomer

  so first of all, I need to set the variable of liaison on behalf of the selected customer.

  Can you please tell me how to set this variable binding in this case.

  After you set the LOV to your product attribute, correspondting VO in the LOV will appear under view accessors.

  Change the accessor of the view, you will see the variable binding. Set its value to the customer field of the parent object.

  Visit this link: https://www.youtube.com/watch?v=nXwL2_RP7AQ

  Kind regards

  Elias.

• JS script to add custom text and the name of file to file info in the title of the document

  Would be very happy for any help with this one...

  JS script add custom text and the name of file to file info in the title of the document

  Thank you very much

  Super: O)

  I have a folder of say 50 images and I want to run a lot of JS script

  example in the title of the document: image Nr 81205

  custom text is 'image Nr' + '81205 file name.

  activeDocument.info.title ="Nr of pictures"+ decodeURI(activeDocument.name);

  This would be correct without seening the ext file

  Thank you very much

• Custom TOC and the player controls

  I would like to customize the entire drive and TOC navigation for my captivate project.
  
  For example, I would like my logo clients above the table of contents and create a look that is customized for the whole experience. Example I would expose the design after: http://www.articulate.com/community/showcase/?page_id=96
  
  Can you elaborate on the steps I must take to create an appearance that is customized for navigation and the reader? Is there a detailed documentation that I can read on this subject? My friend can write custom, actionscript code that I'm not sure that the General overview of the process. When I export captivate files to Flash CS3, I do not see the files TOC or player?

  Thank you!

  yellomaggie wrote:

  Thank you for your time. In summary, you say that when you export the cp to Flash file and discover the actionscript Panel, there is no variables to customize the table of contents. Basically, the table of contents is under lock and key? If everything should not be accessible?

  Is it not possible to customize the shell that houses the presentations of captivate? I love the entire look of this presentation: http://www.articulate.com/community/guru/2009/Evernote/index.html

  .

  Thank you!

  Yes, I think that you can't really do much with the TOC design and layout, but I would like someone to prove me wrong... Maybe you could try to export a Captivate project finished flashing, edition of willingness to here and compile in Flash as you suggested, but I never had luck actually getting it to compile correctly. (I guess that this feature is only there to make you reach a roundabout idea of how things work). I just tested this out, and I don't think it puts even the reading/table of contents bar in the exported FLA, they seem to be separate.

  The other solution you suggested, having a wrapper shell 'accommodation' presentations is a good and it would be appropriate, but with a lot of work. However, you will need make the menu custom Flash which houses the s embedded SWF and find a way to control the internal variables of the SWF integrated to control reading/slides. (This is possible and are found elsewhere in this forum)

  The disadvantage would be that the only options available in the variables being access to slide numbers, you would have probably coloring edit and redo parts of the menu for each new project, you cannot access the names of slide of Dove.

• Custom hardware and the module of ARM

  Hello world

  Our company is in the early stages of designing a custom measuring device. In the past we used Microchip microcontrollers (PIC16 and 18), a simple IDE and a C compiler, but for the new generation of devices we will use microcontrollers from Luminary Micro ARM. Since we are also users of LabVIEW, the choice for the LabVIEW embedded module for ARM seems logical. I read a lot of documentation OR and watched the tutorials, but I'm still uncertain on what we may or may not do with the module. Until we buy eval kits and the module, I need to have some facts.

  1. The 'heart' of our circuit is a microcontroller LM3S1968, this MCU is ARM Cortex-M3 based. It is listed in Keil device database (http://www.keil.com/dd/), then is also a LabVIEW "Tier 1" - peripheral (http://zone.ni.com/devzone/cda/tut/p/id/7066)? ".
  2. What I have to add the MCU manually to the project as described in http://zone.ni.com/devzone/cda/tut/p/id/7152, or can I just it select from a menu?
  3. We already have a LM3S1968 evaluation kit (http://www.luminarymicro.com/products/lm3s1968_evaluation_kits.html) and a programming JTAG device. We can use these hardware components to evaluate the LabVIEW ARM module or should I buy a complete kit of NOR (including the dev board)?
  4. Is a JTAG connector on our device and a connection for a JTAG debugger, all I need for debugging the device with LabVIEW?
  5. Assessment OR (http://sine.ni.com/nips/cds/view/p/lang/en/nid/205040) kit includes JTAG Keil ULink2 adapter on the photo?
  6. We want to connect the MCU to a converter A/D, the AD7738 of Analog Devices (http://www.analog.com/en/analog-to-digital-converters/ad-converters/ad7738/products/product.html). We will use the SPI bus for communication and I know what codes to send to get a basic reading. What I need to use the SPI-Subvi and send the hex codes or can I use a Subvi 'AD7738' built-in device drivers CD?

  I apologize in advance for the number of questions, it's just that the use of LabVIEW for the development of material is completely new to me

  Thanks in advance for your help.

  Paul

  Hello Paul!

  I'll try to answer your questions and I hope someone else can add more information if necessary.

  1. The 'heart' of our circuit is a microcontroller LM3S1968, this MCU is ARM Cortex-M3 based. It is listed in Keil device database (http://www.keil.com/dd/), then is also a LabVIEW "Tier 1" - peripheral (http://zone.ni.com/devzone/cda/tut/p/id/7066)? ".

  Answer: no, that would be a level 2 device, we now offer three level 1 devices and information on these can be found on the link you condition.

  1. What I have to add the MCU manually to the project as described in http://zone.ni.com/devzone/cda/tut/p/id/7152, or can I just it select from a menu?

  Answer: you need to add yourself as described in the link you provided.

  1. We already have a LM3S1968 evaluation kit (http://www.luminarymicro.com/products/lm3s1968_evaluation_kits.html) and a programming JTAG device. We can use these hardware components to evaluate the LabVIEW ARM module or should I buy a complete kit of NOR (including the dev board)?

  Answer: is trickier, LV Module Embedded for ARM in trial mode will have some limitations (size applications, can open the development environment for a number of days and so on), but it should not have limits when it comes to other targets as described in the links that you have already provided. When it comes to the JTAG interface, I would recommend using the Keil ULINK2 USB-JTAG.

  1. Is a JTAG connector on our device and a connection for a JTAG debugger, all I need for debugging the device with LabVIEW?

  Answer: I would like to make use of the Keil ULINK2 USB-JTAG Adapter for debugging and allows us to download the code on the target. In fact, it's the only way we can download code on the ARM, but we can use a serial port / TCP in addition to JTAG debugging.

  1. Assessment OR (http://sine.ni.com/nips/cds/view/p/lang/en/nid/205040) kit includes JTAG Keil ULink2 adapter on the photo?

  Answer: Yes.

  1. We want to connect the MCU to a converter A/D, the AD7738 of Analog Devices (http://www.analog.com/en/analog-to-digital-converters/ad-converters/ad7738/products/product.html). We will use the SPI bus for communication and I know what codes to send to get a basic reading. What I need to use the SPI-Subvi and send the hex codes or can I use a Subvi 'AD7738' built-in device drivers CD?

  Answer: I/O could be implemented using the basic IO layer provide us as described here:

  http://zone.NI.com/DevZone/CDA/tut/p/ID/7119

  http://zone.NI.com/DevZone/CDA/tut/p/ID/7144

  I hope this helps!

• In Photos, I changed the date, title and information on the location of the images of a slide digitizing company.  I want to preserve the custom metadata and the original resolution of 2500 dpi in a file backup, but when I export it loses my metadata chan

  Using version 1.3 of Photos, I edited the metadata about the images, I received a business of digitization of slides to insert the first day of the slide, the location, a title and a keyword.  I want to archive these images with the original resolution of 2500 dpi, but when I export original unmodified, it does not preserve information.  When I export by choosing export as XMP IPTC, I can't read the XMP file to see if there are my revisions.

  When I export using the 'Export # photo (s)' choice, I can use the previews/tools/Inspector/iptc and see my changes.  But this photo has only 72 dpi.

  Is there a way to preserve this modification of metadata information in the original not modified?  Alternatively, this file has XMP I exported the info?  If so, how can I read it?  And that would mean I need to export both the original unmodified and the XMP file to my files from archive?

  Don't know what you want - well there is a CIO field in the EXIF fields it is meaningless as DPI is not a setting but the result of a math problem third grade - points by (divided by) inches until you add inches per impression you have no IPR - and when you add inches the DPI for printing are determined by calculating not by any setting

  For more information, see http://www.rideau-info.com/photos/mythdpi.html

  A 1200 x 1800 pixels picture printed as a 4'x 6' printing is 300 DPI bit matter what setting the EXIF says

  LN

• Professional customer P6 and the Installation of Citrix.

  
  Can someone help me to do professional P6 and configuration of citrix.

  I want professional p6 must be accessible via citrix please give me the steps I need to do to complete the installation.

  Thanks in advance.

  Hello

  To change mode, you will need to:

  (1) launch a window of command prompt (with admin rights)

  (2) run "change user/install.

  Do all facilities

  (3) launch the command prompt window (if you closed)

  (4) perform "change user / execute.

  Regarding permissions, I recommend the following article of Oracle: 895873.1

  But the main things to do is read/write on the folders permissions following (locations may vary slightly depending on the version you have installed)

  C:\Program Files\Fichiers Files\Primavera Common

  C:\Program Files\Oracle\Primavera\Primavera P6\

  * Choose the Program Files (x 86) folder if you use 64 bit.

  You can go lower and set the permissions to certain folders and files, but I tend to just go for these two top-level folders make life a little easier.

  Concerning

  Alex

• Custom schema and the custom functions, menus and responsibilities

  Hi all
  
  My company has developed an integration of the EBS activate the third-party software create elements and other objects. We use a JDBC connector and call the underlying pl/sql API (such as EGO_ITEM_PUB. PROCESS_ITEM) Oracle. We have added some features, menus and responsibilities to our EBS 12.1.1 installation in order to provide a mechanism for access control for our JDBC integration because it connects directly to a db schema. We call FND_FUNCTION. TEST to see if the user connected / responsibility has the function it wants to call which are assigned to him. We also plan to use a custom schema, so that we don't have to plug directly into the apps schema, because we believe that our customer will not do. What do you think?
  
  I have planed to use FNDLOAD to download all the function menus and responsibilities to provide a script for our client, so that they can download simply all objects (menus,...).
  
  Now my issues are:
  
  Should they download these menus, functions and responsibilities in our custom schema or in the apps schema?
  
  The menus and responsibilities always defined in the apps schema?
  
  In the schema are defined if they are created in the GUI (oracle forms)?
  
  
  
  Thank you
  Konrad

  I would say FNDLOAD takes care to put all objects in the schema corresponding to FND/APPLSYS, right?

  Fix.

  What about subsidies for the apps schema? Don't the apps schema now on the new features, menus and responsibilities after the DOWNLOAD of FNDLOAD process?

  What grants you are talking about? The apps schema will certainly know about these new functions/menus/responsibilities (if not, you will not be able to see or access it from the application) - most of the data that is stored in the APPLSYS schema is accessible by the APPS schema.

  Thank you
  Hussein

• How can I check the voltage values on the acquisition of data with a data acquisition assistant and the custom scale?

  I use a custom scale and the DAQ assistant to acquire data from a USB DAQ device.  How can I display voltage gross values at the same time?

  Thank you

  David

  Do not use the ladder custom, but read the raw data using the daq assistant and adapts the data later. Or the scale of the data using the inverse of the custom scale.

• How to get the name of the client computer and the name of the customer osuser

  Hello everyone,
  the trigger below works fine. But I want to get the name of the client computer and the name of osuser customer in the output of the same trigger shown below, how do I do this in the same trigger? any help is highly appreciated.
  Thank you and best regards.
  
  triggering factor:
  ------------
  CREATE TABLE logonaudit
  (
  user_id VARCHAR2 (30),
  sess_id NUMBER (10),
  LOGON_TIME DATE,
  host VARCHAR2 (20));
  
  Table created.
  
  CREATE OR REPLACE
  Logon_audit RELAXATION
  AFTER LOGON
  WE DATABASE
  DECLARE
  V_program varchar2 (120);
  BEGIN
  SELECT UPPER (program)
  IN v_program
  SESSION $ v
  WHERE audsid = sys_context ('USERENV', 'SESSIONID');
  If (upper (v_program) as 'TOAD %' or upper (v_program) like '% SQLPLUS %')
  then
  INSERT
  IN logonaudit
  VALUES)
  user,
  sys_context ('userenv', 'sessionid'),
  SYSDATE,
  sys_context ('userenv', 'host')
  );
  end if;
  END;
  
  the output showing sessionid, date, db user name, as a local server machine name.but I want osuser of customer names and the name of the client computer as you know connection of clients to the database of their machines.how can I achieve? any help much appreciated.
  
  Published by: 938946 on December 25, 2012 12:15 AM

  According to AskTom - do not use audsid, dangerous - can be 'zero '.

• Custom notifications and ringtones not available more

  I can't take when this happened, but it was last week, but custom notification and the ringtone that I put restore the default values, and the phone is no longer see them in the list.

  Initially they sounds (mp3 and wav) were in directories in the main repository, Notifications and Ringtones I moved the in the subdirectory of a music that I found online, but I still don't see them in the list.

  The only thing I've done recently is updated the built in "Themes" app.

  Someone at - it else discovered this and been able to solve the problem?

  Actually, it's funny you mention it as a reboot seemed to have worked without even seeking the .nomedia file.

  I restarted the phone between the messages and the selection is now available.

  Bug somewhere, I guess.

• Custom resolution of the 14 items?

  I use first items 14 and I want to use the custom resolution settings but cannot find how. When I start a new project, I gives me the opportunity to change the settings, but then it only allows me to select presets from a dropdown list. I want to be able to use the parameters of resolution custom, for example, I want to start a project with a resolution of 1000 x 1000. How would I go all this elements 14?

  Custom resolutions and the proportions are not available in Premiere Elements.

  Based on the standard video resolutions, Premiere Elements can operate in standard resolution 4:3 or 16:9 and 16:9 1280 x 720, 1920 x 1080 and 4 k.

• Customized using AID the deployment of ABC with XPATH error

  Hi all
  
  I use a function custom xpath as described below in the ABC BPEL provider.
  
  < copy >
  < expression = "sql:queryToWhereClause (ora:getNodes('xxx','xxxx','xxxxxxxx'))" / >
  < variable = 'element VariableName' = 'main' / >
  < / copy >
  
  When I deploy this ABC of jdeveloper, everything works fine.
  
  When I try to deploy the composite of CBA using the HELP, it throws this error,
  
  [scac] error: in QueryPersonEbizProvABCSImplProcess.bpel (733): could not resolve function xpath "queryToWhereClause", because the function "sql:queryToWhereClause" is not registered.
  
  I dropped the class in $SOA_HOME/soa/modules/oracle.soa.ext_11.1.1/classes, and it always seems that the HELP is not able to locate the class. I'm fall classes in the right location, or is this something else that is missing? Pointers are appreciated.
  
  Thank you
  Anish.

  Anish,
  This comes as a result of compilation of SOA tools do not include $SOA_HOME/soa/modules/oracle.soa.ext_11.1.1 in the class path, such as $SOA_HOME/bin/ant-sca-compile.xml which is used in turn by AID for the development of composite materials.

  You can work around this by adding classes/libraries custom $SOA_HOME/bin/ant-sca-compile.xml in the classpath. Add the following entry in the section "":
  

  With this Ant-sca - compiles .xml and so also HELP will be aware of your function custom xpath and the compile error should disappear.

  Gerhard

• JTable custom - editor update the currently selected cell

  I have a JTable and a custom converter / editor for my JTable column. I have a small problem, where if I select a cell that uses the custom editor, and the purpose of the model is updated from another thread, is not discounting the value in my editor to reflect the new value. Is there a way to force the Publisher must be drawn with the new object?
  
  I'll put the new value on the model using the. setValueAt(); and then call fireTableCellUpdated() but the Editor still shows the old object.
  
  Any ideas?
  
  Thank you
  
  BBB

  Well that's what I would do, but do not know how to get a handle on the editor-in-Chief of the displayed cell to the for update.

  JTable #getCellEditor (). It is null if no cell is being edited, that a cell can be change at the same time). GetEditingRow/column store, call cancelCellEditing and then startEditAt() after your fireTableCellUpdated.