Custom TOC and the player controls

Similar Questions

• This will remove all your custom settings and the settings of many extensions.

  Hello

  I was reading this article of knowledge and he says:
  "This will delete all your custom settings and many extensions settings."
  What are the custom settings?

  for example one of these and what else
  bookmarks?
  Add - ons?
  Top toolbar - Customize the toolbar
  Add on the toolbar
  Firefox/preferences
  Authorization Manager settings
  the new page open

  Corrupted preference file
  File preferences may be corrupt, Firefox prevents writing to it. If you delete this file, Firefox will automatically create another when it comes to.

  Here's how to delete the prefs.js file.

  This will remove all your custom settings and the settings of many extensions.
  Open your profile folder:

  In the menu bar, click the Help menu and select troubleshooting information. The troubleshooting information tab will open.

  In the section the Application databases, click view in the Finder. It will open a window with the folder of your profile.
  Note: If you are unable to open or use Firefox, follow the instructions for finding your profile without having to open Firefox.

  In the menu bar, click Firefox and select Quit Firefox

  Locate the prefs.js file (and, if applicable, the prefs.js.moztmp file).
  Delete these files and files prefs - n.js where n is a number (e.g. prefs - 2.js).
  If there is, remove the Invalidprefs.js.
  Restart Firefox. You should now have reset all preferences.

  Based on information from preferences not saved (mozillaZine KB)

  See also http://kb.mozillazine.org/Profile_folder_-_Firefox

  #1: there are too many pref for all kinds of adjustment which will offer a recipe of what you lose and how to keep certain parameters.
  It is possible to copy specific lines of a prefs.js to this file in another profile or restore some settings after deleting this file in the current profile folder.

  All the prefs that show as a user defined and appear in bold on the topic: config page are stored in the prefs.js file.
  
  This includes the changes you make and data Firefox itself and extensions store as data/parameters in a pref.
  It's

  #2,3: the localstore.rdf file stores the toolbar configuration and other data.

  #4: the current versions of Firefox shows the menu entry "Tabs" at the top menu ' display > toolbars "and" Firefox > Options ' and in the menus toolbar pop-up if the tabs are not in the default position on the top.
  
  If the notches located on the top and the menu entry is not available and you want to move the tabs under the navigation toolbar, then you have to toggle the pref browser.tabs.onTop false on the subject: config page.
  
  A restart of Firefox is necessary for updating the menu entry to display or remove.

  Note that this pref will no longer effect when the code Australis lands on the output channel (code Australis will probably land in Firefox 29).

  #5: see https://support.mozilla.org/kb/Clear+Recent+History

  Compensation of the "Site Preferences" clears all exceptions for cookies, images, pop-ups, installing the software, stored passwords in permissions.sqlite and other site specific data stored in content - prefs.sqlite (including zoom on the page).

  Deletion of cookies will delete all specified (selected) cookies, including cookies with an exception allowing you want to keep.

  #6,7: history of search bar is the story of the search bar (Google) on the Navigation toolbar.
  
  All recorded data to a form on a web page is included in the data in the form, but you can not separate and distinguish the two.
  
  Browsing history is the history of the web pages you have visited.

  • Form history control: https://addons.mozilla.org/firefox/addon/form-history-control/
  • Tahoe Data Manager: https://addons.mozilla.org/firefox/addon/data-manager/

  #8: session cookies are always kept in memory and never stored on the disc in cookies.sqlite
  
  You can only delete specific cookies manually in the Cookie Manager or leave cookies expire when you close Firefox to make them behave like session cookies.
  
  Cookies of other compensation will include all cookies and don't obey the exceptions that you have made.

  #9
  Data stored in storage DOM is not stored in cookies.sqlite, but it is generally stored in the webappsstore.sqlite file or possibly in the form of data in IndexedDB.

  • https://developer.Mozilla.org/en-us/docs/Web/Guide/API/DOM/Storage
  • https://developer.Mozilla.org/en-us/docs/IndexedDB
  • https://addons.Mozilla.org/en-us/Firefox/addon/Foundstone-HTML5-local-storage/

• Fingerprints and the remote control supported on Satellite P100-387

  P100-387 has a fingerprint and the remote? Please, someone answer me.
  Thank you.

  Hello

  To my knowledge, the Satellite P100-387 does not support the fingerprint reader and is not supplied with the remote control.
  But you're right.
  The fingerprints and the remote control are optional and some laptops in the P100 series support fingerprint reader and are delivered with command remotely.

  I also found this site with P100-387 material specifications:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/JSP/productPage.do?service=EU&PRODUCT_ID=120514#0

• user belongs to a domain and user does not belong to the local administrator or power users groups, or any custom group and the user is not part of the domain administrators group, but user show that it is admin

  WinXP
  user belongs to a domain and user does not belong to the local administrator or power users groups, or any custom group and the user is not part of the domain administrators group, but user show that it is admin

  I did a gpupdate/force and restart twice PC
  Yet, user indicate it is always admin when we right click on Start menu and see the possibility to open all users

  Hi elena_ad,

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public on the TechNet site. Please post your question in the below link:

  http://social.technet.Microsoft.com/forums/en/winserverManagement/threads

• LOV cascading if I don't have only one table with the customer name and the name of the product in the ADF.

  Hi Please help me how to use cascade, if I don't have only one table with the customer name and the name of the product in the ADF... I use Jdeveloper 11.1.

  For the client, I used customer VO with client list to fill but to populate the product that I use bind variable PrODUCT_NAME select distinct from TABLE where client_name =: bindCustomer

  so first of all, I need to set the variable of liaison on behalf of the selected customer.

  Can you please tell me how to set this variable binding in this case.

  After you set the LOV to your product attribute, correspondting VO in the LOV will appear under view accessors.

  Change the accessor of the view, you will see the variable binding. Set its value to the customer field of the parent object.

  Visit this link: https://www.youtube.com/watch?v=nXwL2_RP7AQ

  Kind regards

  Elias.

• JS script to add custom text and the name of file to file info in the title of the document

  Would be very happy for any help with this one...

  JS script add custom text and the name of file to file info in the title of the document

  Thank you very much

  Super: O)

  I have a folder of say 50 images and I want to run a lot of JS script

  example in the title of the document: image Nr 81205

  custom text is 'image Nr' + '81205 file name.

  activeDocument.info.title ="Nr of pictures"+ decodeURI(activeDocument.name);

  This would be correct without seening the ext file

  Thank you very much

• published swf missing the player controls

  Hello good people.
  
  SWF works, but NOT play the skin. Help?
  
  1. imported the .mov in Flash CS3, chose the skin, autoplay set to false
  2 film released to the root directory of the site > movies > salmon - everything is there (the skin, fla, flv, html, .js, thrown into the folder Scripts in movies > salmon just in case)
  3. open hero.htm in Dreamweaver CS3 page, insert > media > flash > salmon.swf
  4 loop and autoplay unchecked
  5. Preview in the browser = without playback controls, so I can't play the movie (BTW, if I had set autoplay = true in Flash, movie plays automatically, but once again, no skin game)
  6. double check the file appearance and all the rest is on my server in the appropriate folder
  7 swf plays FlvPlayer in Flash, and HTML generated by Flash AND look of the player watch
  
  Here again, the movies play fine if I select autoplay = yes in Flash, but still no controls.
  
  End of my rope! Thanks for any help.
  
  Gina

  Thought to it - so for those who follow...

  Copy the skin file in the root directory where the page html and poof, the appearance of the player!

  I don't know why it must be in the root directory, when all the other files are in another folder, but that's it!

• Pressing the Tab key activates the player controls

  I am simulating an application that requires the use of the Tab key. In Captivate, the Tab key is a shortcut for click box that passes just to the next slide. During playback when the tab key, in addition to advancing to the next slide, a player control button is activated as indicated that she has highlighted. In the simulation, the user may need to press the Tab key, a number of times, which in turn moves to the next slide and highlights the next player button. Once the user pressed Tab the required number of times, one of the controls is highlighted. In the simulation, users usually need to press ENTER after a sequence of tabs, which in addition to performing the desired action simulation, also performs the control of the player highlighted button. This could be something quick return to output and everything. That's the problem in a dirty word.
  
  I tried 'tab_no_yellow.swf' and 'tab_no_yellow_global.swf' assistants, nothing helps. The result of the use of these files has been changed. They understand without change to action by all, at all, and the user must press Tab twice to each single press in the real application.
  
  I tried to disable the player in total controls which completely weird tab has led key behavior. In this configuration, pressing the Tab key seems to go through a list of player controls 'hidden' before the scheduled execution, click action box. It's fairly consistent... that there are six tabs executing 'goto next slide' the first time and five later. If you press Enter until through all the controls on the shadow drive, it performs some Player control, it happens to be on.
  
  This is the environment in which this happens:
  Captivate 3
  Skin: BMP bars
  Playback bar: Captivate
  See the establishment of borders: disabled
  Publication: SWF only - not HTML - Flash Player 7 (also tried 8 & 9)
  
  The SWF file plays as an animation on a page of Lectora (Trivantis) generated HTML in a browser window IE 6 fixed - without toolbars, without address bar, without scroll bars, etc..
  
  Any help to solve this dilemma is greatly appreciated.

  Thanks for your reply. I had discovered this information earlier, but still cannot get the application to work. In the end, it was of part of the solution. Here's what he had to do to things work:

  In Captivate
  -Disable the playback bar
  -Disable the 508 compliance
  In Lectora
  -Add "SeamlessTabbing" as a parameter to the .swf object and set it to "false".

• Custom hardware and the module of ARM

  Hello world

  Our company is in the early stages of designing a custom measuring device. In the past we used Microchip microcontrollers (PIC16 and 18), a simple IDE and a C compiler, but for the new generation of devices we will use microcontrollers from Luminary Micro ARM. Since we are also users of LabVIEW, the choice for the LabVIEW embedded module for ARM seems logical. I read a lot of documentation OR and watched the tutorials, but I'm still uncertain on what we may or may not do with the module. Until we buy eval kits and the module, I need to have some facts.

  1. The 'heart' of our circuit is a microcontroller LM3S1968, this MCU is ARM Cortex-M3 based. It is listed in Keil device database (http://www.keil.com/dd/), then is also a LabVIEW "Tier 1" - peripheral (http://zone.ni.com/devzone/cda/tut/p/id/7066)? ".
  2. What I have to add the MCU manually to the project as described in http://zone.ni.com/devzone/cda/tut/p/id/7152, or can I just it select from a menu?
  3. We already have a LM3S1968 evaluation kit (http://www.luminarymicro.com/products/lm3s1968_evaluation_kits.html) and a programming JTAG device. We can use these hardware components to evaluate the LabVIEW ARM module or should I buy a complete kit of NOR (including the dev board)?
  4. Is a JTAG connector on our device and a connection for a JTAG debugger, all I need for debugging the device with LabVIEW?
  5. Assessment OR (http://sine.ni.com/nips/cds/view/p/lang/en/nid/205040) kit includes JTAG Keil ULink2 adapter on the photo?
  6. We want to connect the MCU to a converter A/D, the AD7738 of Analog Devices (http://www.analog.com/en/analog-to-digital-converters/ad-converters/ad7738/products/product.html). We will use the SPI bus for communication and I know what codes to send to get a basic reading. What I need to use the SPI-Subvi and send the hex codes or can I use a Subvi 'AD7738' built-in device drivers CD?

  I apologize in advance for the number of questions, it's just that the use of LabVIEW for the development of material is completely new to me

  Thanks in advance for your help.

  Paul

  Hello Paul!

  I'll try to answer your questions and I hope someone else can add more information if necessary.

  1. The 'heart' of our circuit is a microcontroller LM3S1968, this MCU is ARM Cortex-M3 based. It is listed in Keil device database (http://www.keil.com/dd/), then is also a LabVIEW "Tier 1" - peripheral (http://zone.ni.com/devzone/cda/tut/p/id/7066)? ".

  Answer: no, that would be a level 2 device, we now offer three level 1 devices and information on these can be found on the link you condition.

  1. What I have to add the MCU manually to the project as described in http://zone.ni.com/devzone/cda/tut/p/id/7152, or can I just it select from a menu?

  Answer: you need to add yourself as described in the link you provided.

  1. We already have a LM3S1968 evaluation kit (http://www.luminarymicro.com/products/lm3s1968_evaluation_kits.html) and a programming JTAG device. We can use these hardware components to evaluate the LabVIEW ARM module or should I buy a complete kit of NOR (including the dev board)?

  Answer: is trickier, LV Module Embedded for ARM in trial mode will have some limitations (size applications, can open the development environment for a number of days and so on), but it should not have limits when it comes to other targets as described in the links that you have already provided. When it comes to the JTAG interface, I would recommend using the Keil ULINK2 USB-JTAG.

  1. Is a JTAG connector on our device and a connection for a JTAG debugger, all I need for debugging the device with LabVIEW?

  Answer: I would like to make use of the Keil ULINK2 USB-JTAG Adapter for debugging and allows us to download the code on the target. In fact, it's the only way we can download code on the ARM, but we can use a serial port / TCP in addition to JTAG debugging.

  1. Assessment OR (http://sine.ni.com/nips/cds/view/p/lang/en/nid/205040) kit includes JTAG Keil ULink2 adapter on the photo?

  Answer: Yes.

  1. We want to connect the MCU to a converter A/D, the AD7738 of Analog Devices (http://www.analog.com/en/analog-to-digital-converters/ad-converters/ad7738/products/product.html). We will use the SPI bus for communication and I know what codes to send to get a basic reading. What I need to use the SPI-Subvi and send the hex codes or can I use a Subvi 'AD7738' built-in device drivers CD?

  Answer: I/O could be implemented using the basic IO layer provide us as described here:

  http://zone.NI.com/DevZone/CDA/tut/p/ID/7119

  http://zone.NI.com/DevZone/CDA/tut/p/ID/7144

  I hope this helps!

• loop of two producers for quick DAQmx and the user controls?

  Hello

  Sorry if my question is maybe a bit too general (I don't have a VI implementation yet).

  I think about the solutions for a Structure of producer-consumer with event loop in the part of the producer.

  So far, if I had to do a project with DAQ, data analysis, data recording and enter the user controls, I've followed usually this kind of approach:

  I used the producer part to capture interactions with the user, and I also had a state machine in the part of the producer, with registry change. I also buy (any faster then 10ms) DAQmx device data in the part of the timeout of the structure of the event in the loop of the producer. I have several consumer loops down, such as data analysis, data recording, etc... I send the data measured in a cluster with the enumerations of the State of the loop from producer to consumer with queue loop.

  I'm not happy with my approach for the following reasons:

  1,

  If I need device acqure faster DAQmx data that the operating system clock can handle (like 1 MHz), so I can't put it in the part of time out of the structure of the event of the producer loop, because here I can go through the while loop with minimum 1 ms.

  2,

  If I put this part DAQ in a loop for quick consumption, it is not admissible for orders from the QUEUE line after that it starts to run (assuming that I use the standard structure of producer-consumer, so consumer loop every time iterates once, when a package comes from the Dequeue).

  Then say, how can I control a young (timed by DAQmx device internal clock) loop of data acquisition of the structure of the producer of the event loop? As loop DAQ to start, stop, restart, etc...

  Thank you very much for the advice!

  You can certainly have several loops of producer.  Have a User Interface, loop driven events to send commands and a separate data acquisition loop to send data are not a problem.  Each loop has a separate queue. (You might be able to make it work with a single, but using two queues avoids many problems).  Often, I used a system of three loops long before that everyone was talking about calling it a producer/consumer.

  Lynn

• 11R2 how to change IP in OWB_REPOSITORY_LOCATION and the default control center

  We are changing the IP address of the Server repository database OWB. Review of the locations tab, I found the default control center and OWB_REPOSITORY_LOCATION are configured with IP addresses, so I need to change the IP addresses in hostname in both entities. I think that I can not use the OWB_HOME/rtp/sql/UpdateLocation.sql script, so, how do?
  I would be grateful if someone points to the other questions I should check OWB point of view.
  
  Thanks in advance
  Carmen

  Carmen,
  Just change the address of WB_RT_SERVICE_NODES control centre.
  Don't take any attention to the value of hostname DEFAULT_CONTROL_CENTER in Design Center because this value is taken from the connection details in the window of loging (for display in the Design Center) (if you type in the address IP of Loging window you'll see IP address in the settings of DEFAULT_CONTROL_CENTER without taking into account the actual address stored in the repository OWB).

  Kind regards
  Oleg

• Control of the database and the grid control

  Hello
  
  I installed Oracle 10 g DB and configure its control of DB. Then I added this database as the target of OEM Grid Control.
  
  My question is: after you add the database as a target for the grid control, be it still controlled by the DB control and the grid of the company control?

  It's good questiion Yes this will be monitor by both, please check both console and see

• How to inactivate the player controls

  I would like to disable the player so that all navigation controls is done exclusively through interaction the slide. Is there a way to do this?

  Hello

  Pretty simple. Click project > skin-> Playback Control Tab. Uncheck the option 'display the playback control '.

  See you soon... Rick

• In Photos, I changed the date, title and information on the location of the images of a slide digitizing company.  I want to preserve the custom metadata and the original resolution of 2500 dpi in a file backup, but when I export it loses my metadata chan

  Using version 1.3 of Photos, I edited the metadata about the images, I received a business of digitization of slides to insert the first day of the slide, the location, a title and a keyword.  I want to archive these images with the original resolution of 2500 dpi, but when I export original unmodified, it does not preserve information.  When I export by choosing export as XMP IPTC, I can't read the XMP file to see if there are my revisions.

  When I export using the 'Export # photo (s)' choice, I can use the previews/tools/Inspector/iptc and see my changes.  But this photo has only 72 dpi.

  Is there a way to preserve this modification of metadata information in the original not modified?  Alternatively, this file has XMP I exported the info?  If so, how can I read it?  And that would mean I need to export both the original unmodified and the XMP file to my files from archive?

  Don't know what you want - well there is a CIO field in the EXIF fields it is meaningless as DPI is not a setting but the result of a math problem third grade - points by (divided by) inches until you add inches per impression you have no IPR - and when you add inches the DPI for printing are determined by calculating not by any setting

  For more information, see http://www.rideau-info.com/photos/mythdpi.html

  A 1200 x 1800 pixels picture printed as a 4'x 6' printing is 300 DPI bit matter what setting the EXIF says

  LN

• Sending data through the serial port and the mscomm control is not the same as the original data

  Please find attached the mscomSerialWrite2.vi and the resulting image.

  Try it and find that when data "FFAE" 4040 EA41 D8FF is sent,

  the received data are "FFAE" 4040 EA41 3F

  I tried other data, the result is as follows:

  sending: 4164 8163 4341 03 receive: 41 64 81 63 43 41 03 leadK
  sending: A143 B245 6AAA BBCC receive: AA BB 00 A1 B2 45 6a 43 result: NG
  sending: AAAA AAAA AAAA AAAA AAAA AAAA receive: result AA AA AA AA AA AA AA AA AA AA AA AA K
  sending: A1A1 A1A1 A1A1 A1A1 A1A1 receive: result A1 A1 A1 A1 A1 A1 A1 A1 A1 A1K
  Send: FFAE 4040 EA41 D8FF receive: FF AE 40 40 41 EA 3F result: NG
  Send: FFAE 4040 EA41 D8FF AA23 AB33 A233 AAAA A404 ABCD A2CD A22D B22C receive: FF AE 40 40 41 EA 3F 3F 3F 3F AA AA AB CD A2 CD result 3F 3F 3F: NG
  Send: FFAE 40A 2 SDAC AETS receive: result FF AE 40 A2 CC DD EE 00: NG

  Please help me solve the problem.

  

  According to Microsoft, you want something with non-printable strings as an array of bytes, not a string.  I don't know that it will make a difference in this case, but may be worth a try.