customer of Hyper-v is not visible in the windows backup utility

Similar Questions

• Watercolor Wizard installed CC PS in 2014 but not visible in the window > Extensions

  I installed this add-on to Photoshop. It is not visible in Photoshop > window > Extensions, even if the designer Cloud Desktop app and Adobe Extension Manager CC report it as installed.

  I think that it works with Photoshop before they took the Flash, so PS CC and not CC 2014.

• WD external drive is not detected by the Windows backup program

  Original title: with a WD external drive backup program

  I have a WD My Book Essential 320 GB external drive. The Windows backup program does not recognize the drive... The drive IS recognized on my computer and I can access and transfer and copy and paste to it without problem. It's just the backup program which does not. No error message or anything. Only, it does not recognize the drive when I get to the destination area. I tried to update the drivers. The WD support site has Backup downloads for OTHER external drives, but not this one. Their Web site says to contact Microsoft support. Any suggestions?

  Hey mrlray,

  Here's what you can do.

  Perform the clean boot

  Backup process a lot sometimes, this problem is provided by third party in conflict with windows software. See if this is the case here by putting your boot system before you perform the backup.

  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  Note: Ensure that return you the computer to a normal startup mode after you have completed troubleshooting.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• CD is not visible in the window 'computer '. It indicates that the driver has been disabled by another driver

  restart resolves the problem, then it repeats very soon

  Hello
   
  1. when the question is is produced?
   
  Follow the steps below and check if that helps.
  Step 1:

  I would say you click on "fix it" link for automated troubleshooting and fixing the issue below. If the "fix it" does not work, follow the steps manually.

  http://support.Microsoft.com/kb/929461

  Step 2:

  You can remove and reinstall the existing drivers. To do this, follow these steps:
   
  a. Click Start and then click Control Panel.
  b. click System and security, click System and then click on Device Manager.
  Note that if control panel is in Classic view, double-click System and then click on Device Manager.
   
  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
   
  (c) in Device Manager, expand CD-ROM/DVD-ROM drives, right click on the device CD and DVD and then click on uninstall.
  d. When you are prompted to confirm that you want to remove the device, click OK.
  e. restart the computer.
   
  After the computer restarts, the drivers will be installed automatically.
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• BlackBerry Smartphones Feature Request: Dialog boxes to password visible to the Windows API

  One of my frustrations with the help of BlackBerry Desktop Manager is asked for my password again and again many times - first to unlock BlackBerry, then to enter mass storage Mode, then to check the updates of the application, and then to load the software for the device, then to synchronize, etc.

  A partial solution for me was to use a utility script (AutoHotKey) on the desktop to automatically answer BBDM password dialog boxes.  But now BBDM version 5.0, these dialog boxes have become java nested forms that are not visible on the Windows API.

  So, if someone of the RIM is listening, please return the actual password dialog boxes Windows forms.  Ideally, different security BB applications would communicate with them so I have to enter my password once, but until that happens, please don't make it more difficult it must be.

  Thank you for your consideration.

  Hello and welcome to the Forums!

  With regard to your hope that RIM will see your message - these forums are a chain of support to users, not a conduct of user-to-RIM. Therefore, it is unlikely they will see what you wrote. However, if you have specific and constructive ideas for them, I heard they accept this by e-mail to [email protected].

  Good luck!

• typed letters are not visible after the end of the custom field in editfield

  class CustomEditField extends EditField {}

  CustomEditField (String text) {}

  Super("",Text);

  }

  public void layout (int width, int height) {}

  Super.Layout (getPreferredWidth (), getPreferredHeight ());

  setExtent (getPreferredWidth (), getPreferredHeight ());

  }

  public int getPreferredHeight() {}

  Return super.getPreferredHeight ();

  }

  public int getPreferredWidth() {}

  return (Display.getWidth () * 2/3);

  }

  }

  It's my edit custom field.

  When I type on this field and reached end of the field, can't see the letters after that, but I can type (the only thing is to type letters are not visible after the end of the field)

  What is the solution

  I'm sure that you must explicitly enable scrolling. See Manager javadocs.

  In addition, you limit the scope of your field, which may also fail to scroll.

• Comments on CNET articles are not visible in the x 64 every night

  If you open any page of the CNET article for example URL below, there is a bar with a 'Comments' button and a few other links Twitter/Facebook/etc.

  http://News.CNET.com/8301-11128_3-57342036-54/Volvo-plug-in-diesel-hybrid-races-into-Europe/

  This bar is not visible from the x 64 Nightly build, even with all extensions disabled. It is visible that if I start Firefox in Mode safe.

  I find it strange because apparently it is disable the extensions I've already done manually and turn off any custom parameter and the theme that I don't have.

  Looks like a bug on the side of Firefox, as the same page works fine in IE and Chrome, and, as I remember, in the 32 official output x. Any idea?

  I see the same thing with the current 32-bit Nightly build on Linux.
  
  Looks like a problem with the JIT compiler.

  It works if I set javascript.options.methodjit.content to false.

  A good place to discuss problems with Firefox nightly builds and Firefox beta builds is the forum mozillaZine Firefox builds.
  
  There is also a thread every day to discuss problems with the last Nightly build on the build from mozillaZine forum.
  
  You must register on mozillaZine forum site to post in this forum.

  See http://forums.mozillazine.org/viewforum.php?f=23

• How can I just disable logging in El Capitan? It is not visible in the disk utility by pressing alt and file!

  How can I just disable logging in El Capitan? It is not visible in the disk utility when you press alt and file!

  

  Mac OS X: about the logging of system - Apple Support files

  Hope this helps, good luck to you.

• My Hotspot is not visible in the settings

  I update my iPhone to iOS 9.3 6s my hotspot is not visible in the parameter I update my iPhone of many other iOS version 9.3.1 to 9.3.3 and 9.3.4 9.3.2,and need help.

  Hello

  To configure Personal Hotspot, follow the instructions here:

  • Share your Internet connection with Personal Hotspot - Apple Support

  To help to solve problems with your hotspot, follow the steps detailed here:

  • Get help with Personal Hotspot iOS - Apple Support

• Report not visible in the address bar icon have installed the latest version, works with Safari.

  Icon not visible in the browser bar Firefox 40.0 report. Report of uninstalled, installed report 3.6.1507.14; restart the Mac under OS X 10.10.4 Yosemite. Still no report icon. Report NB icon present in Safari 8.0.7 and extras Menu.

  I'm not entirely sure about the feature you request on the subject, but here's what I could find:

  • http://www.Trusteer.com/rapport-icon-not-showing
  • http://www.Trusteer.com/support/how-can-i-tell-rapport-working and support: http://www.trusteer.com/support/submit-ticket

• Share photos added to the photo library via the menu are not visible on the Photos

  Hello

  I started using DxO OpticsPro 10 to process Raw files. When I used the share menu in this application to "Add photo" pictures are exported but not visible in the Photos app. I see that they are in the photo library (Show Package Contents > Masters), but they are not visible in the Photos in the Photos app. However if I use "Export to Application" instead of "Add photo" in DxO OpticsPro the Photos app opens and the image is visible.

  You can't always do and changes directly to the photo library - you must use the program of Photos to import photos - adding photos to the library has no positive effect (and may even cause problems)

  LN

• Paper size error: the custom paper size specified is not supported in the selected state bar

  I am trying to print on custom size paper (9.25 "x 3,875").

  I have OSX Lion and a 8600 Officepro more.

  I inserted the paper into the tray of my 8600 Officepro more.  I adjusted the sliding walls to match the size of the paper.

  I created a new custom in my print settings format.

  But the printer says:

  Paper size error: the custom paper size specified is not supported in the selected tray.

  What the...?  How that recalcitrant monstrosity to behave and do what I have to say?

  Here is the link to the manuals for the 8600 Pro JO.

  You want the user's guide.

• DVD/CD drive is not visible in the Device Manager, but it works.

  Original title: My dvd/cd drive is not visible in the Device Manager but

  This works because I have jst begin with him. I can hear the disc running, but nothing ever comes and when I go to computer its not visible there either.

  Hello

  See the methods listed in the article mentioned below.

  My drive does not appear in Windows Explorer

  http://support.Microsoft.com/kb/330140

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 how to back up and restore the registry in Windows.

  See this link to view the hidden devices:

  http://msdn.Microsoft.com/en-us/library/Windows/hardware/ff553955 (v = vs. 85) .aspx

  I hope this helps!

• I try to install vista on my laptop but a letter of the key is not visible, all the other parts are very well including the serial code, is there another way to get the key of the other information?

  Taché product key

  Hello

  I try to install vista on my laptop but a letter of the key is not visible, all the other parts are very well including the serial code, is there another way to get the key of the other information? The laptop currently has non-OS I've tried to reinstall.

  Thank you

  Scott

  Product keys are bit-agnostic - they don't care if it's 32-bit or 64-bit.

  However, cannot legally use the recovery disk from one computer to a different constructor machine - as other licenses are not properly paid..

  There is nothing nonetheless to try all possible variations on the absence of character (there are only 25, after all the )

  Other than that, your best option is to contact the manufacturer and order a set of recovery disc for the machine. I do no download available for Vista with SP2 - but you can download Vista with SP1 and create the disc.

  http://www.heidoc.NET/Joomla/technology-science/Microsoft/57-Windows-Vista-direct-download-links

• computer Vista Home network is not visible from the XP computers

  I have a home network with 4 computers. Both run Windows XP, Windows Vista is running and
  It works in Windows 7. Each group can see all the others and can access shared files and printers
  with one exception. Vista computer is not visible from the XP computers. It is visible from
  the Windows 7 computer. I guess that there is a setting somewhere on the Vista machine
  That I need to change, but I'm not.

  Thank you.

  David

  Hello

  see Help for these links if

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

  Networking of computers running different versions of Windows

  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-home-network

  Setting up a network home

  http://TechNet.Microsoft.com/en-us/library/bb727037.aspx

  Vista File and Printer Sharing