HDR-AS15 - blur takes over the screen

Similar Questions

• Whenever I load Firefox a very annoying dialog of WiseStamp takes over the screen and insists to be operated. How can I erase this? Is this a virus?

  I would like to get rid of WiseStamp demand but there is no obvious way to do it.

  Please read this article:

  http://www.WiseStamp.com/usage-FAQ#faq_166

  According to the FAQ, you can uninstall it in the modules list: Menu > Preferences > modules and search for "wisestamp" and UNINSTALL.

  I have not used Firefox on Mac for awhile and can't remember exactly how to get to the window modules, but I think it's in the preferences.

• Satellite C600 - slider running around all over the screen

  I was delivered just the C600 Satellite and I can't type my cursor running around all over the screen. I followed the advice of other threads without success. 'FN + F9' does not disable the touchpad, and there is no touchpad under Mouse Properties tab. When I search the computer for "touchpad", in fact, there is no answer.

  Please advise!

  Hello

  Why try to disable the touchpad?

  The Satellite C series there is a BIOS update that will resolve this slider skip the question. There are already a lot of discussion here in the forum:
  http://APS2.toshiba-tro.de/KB0/TSB1103370000R02.htm

  Check this box!

• When you type my letters go all over the screen, everything happens with Firefox.

  After installing Firefox, when I type, the letters are going all over the screen, to the place where I try to type. I used to type without looking at the screen. Now, I have to watch... my cursor disappears, and the letters I type get into something that I previously typed correctly.

  Is when I installed Firefox, and it happens constantly.

  You have this problem when running in Firefox SafeMode?
  http://support.Mozilla.com/en-us/KB/safe+mode
  Do not choose anything at the moment, just use 'continue in safe mode.

• Tecra M2 does not start successfully - zeroes appear all over the screen

  Help!

  My Tecra M2 does not start. After the toshiba logo, a series of zeros (0) appear all over the screen.

  -suspect it is caused by a virus, I formatted the HD (in another PC), but still the zeros appear
  -I might want to start in the DVD player, it seems to read the disc, but nothing happens, just a cursor flashing at the top left of the screen
  -J' I reset / replaced the RAM, but still no effect.
  -the power button works, lights and shuts the laptop but does not start.
  -CPU fan works
  -LED indicators of work are power, battery, dvd, wireless. Does not have HD LED light on.

  Any suggestions on how to solve this problem is greatly appreciated.
  See you soon!

  Hello

  I think we can exclude HARD disk failure because you are able to format it in another computer.
  As you suggest the RAM modules has been replaced but the problem persists
  So in my opinion, a motherboard problem would be possible

  But as you know, it of really difficult to say what might be exactly wrong
  I think that the technician should check the laptop then it would be possible to say what part is malfunctioning

  In any case, I think a motherboard might be affected

• My office has changed color and is all over the screen

  Please help me if you can. Suddenly my office is simply not the same, the color changed and graphic design is all over the screen. I tried Aero who did something for you tell the truth, but he said there is always a problem to solve. It is recommended to go online to find the solution.

  Aero helped me 50% of the problem, now I find myself with the other half.

  It's like a sort of shadow on my screen. and my sidebar goes black. I had to delete all my gadgets, I couldn't see anything.

  Thanks in advance for your help.

  Georges.

  Hello
   
  Method 1:
  
  Troubleshoot Windows display the text on the monitor is not readable
  http://support.Microsoft.com/mats/Windows_Display_Quality_Diagnostics/
   
  Method 2:
  
  Uninstall and reinstall the display drivers and see if that helps.
  (a) click Start, right click on computer.
  (b) click on properties, click on Device Manager
  (c) expand the graphics card, right click on the map
  (d) click on uninstall
  (e) now go to your computer/device manufacturer site,
  Download the updated drivers and install them.
   
  Reference:
  Updated a hardware driver that is not working properly:
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

• My counter top is everything about the place. the upper taskbar is ok. the background is all over the screen.

  My office is irrelevant. the upper taskbar is ok, but inside, we're all over the screen

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://Windows.Microsoft.com/en-AU/Windows-Vista/unlock-and-move-the-taskbar

  Unlock and move the taskbar

  Once you unlock the taskbar, it is ready to move to any horizontal or vertical office edge.

  Taskbar

  View all

  To unlock the taskbar

  • Right click on a space empty in the taskbar. If a checkmark beside him doesn't lock the taskbar, the taskbar is locked. You can unlock it by clicking on lock the taskbar, which removes the check mark.

    

    Note

    To lock the taskbar into place, right-click an empty space in the task bar, then click on lock the taskbar, so that the box is displayed.

  To move the taskbar

  Click on an empty space on the taskbar, and then hold down the mouse button, dragging the taskbar to one of the four sides of the office. Once the taskbar where you want, release the mouse button.

  See you soon.

  Mick Murphy - Microsoft partner

• mouse not working not properly. It jumps all over the screen by itself

  Since the upgrade to the latest version of El Capitan, I have a problem with my mouse and my Trackpad 2. The trackpad does not at all even though it is connected and bluetooth works. The mouse jumps around on the screen and it is difficult to land on the site I want.

  If the mouse you mention is a Magic Mouse 1, which is probably the reason why.   Magic mouse 1 works up to a point, but you need Magic Mouse 2 for maximum effect, once you have upgraded to El Capitan.  I would add, with new OS on the horizon (Sierra), your need for MM2 becomes even more pressing.

• NVIDIA Display 6200 I have lines all over the screen and I can barely read what writing

  I have lines on the screen and I reading wrong with everyone writing have the same problem

   

  This is usually a sign that the video card is failing or the monitor is going bad. Have you tried another monitor or tried the card in another computer?

• Cursor starts to move all over the screen. How to stop it?

  Original title: cursor/mouse creeping

  I saw it everywhere and it could be here. How can I get rid of the 'MOUSE CREEPING SYSDROME". It is started without any particular reason you cursor around homelessness to the screen you upwards, downwards, means on the side, that you do not? Anyone know of a cure.

  Hello

  Visit the link of the manufacturer HP and select 32-bit or 64-bit of Windows Vista you have.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=3644726

  Try to download the

  HP Enhanced Multimedia Keyboard Driver Update

  2008-02-13, Version1.0.7.1, 5.71 M

  HP Enhanced Multimedia Keyboard Driver update fixes an issue with incorrect displayed language

  Try the following steps to check the edition of Windows Vista you are using:

  1. click the button start , enter the computer in the search box, right click on computer and then click Properties.

  2. look under Windows edition for the version and edition of Windows your PC is running.

• my mouse works correctly, it moves all over the screen on its own

  It started this morning very well, then unexpectedly, he starts slowly his way around the screen that I have never had this before, I use a trackball mouse, I already tried rebooting but also tried another mouse and even tried just unpluging the mouse and pluging it back

  Have you tried to use canned Air to clean the mouse?

  Using the uninstall/reinstall driver?

  Is the mouse still under warranty?  Contact manufacturer for a replacement

  There are nearby facilities that could conflict with the mouse?  Router, cell phone, phone?

  Yet away from the system.

  Here are links to support Logitech on the same issue

  See the latest response/resolution on the first thread.

  http://forums.Logitech.com/T5/keyboards-and-keyboard-mice/erratic-mouse-behavior/m-p/325613 
  http://forums.Logitech.com/T5/mice-and-pointing-devices/erratic-MX-performance-mouse-issues/m-p/711968

  http://forums.Logitech.com/T5/mice-and-pointing-devices/anywhere-MX-cursor-moving-on-it-s-own/m-p/663284

  http://forums.Logitech.com/T5/mice-and-pointing-devices/bought-a-Logitech-MX620-wireless-laser-mouse-erratic-mouse/m-p/344362

• Will not except the wordpad window placement... is moving all over the screen.

  I have this annoying problem... I open a wordpad document and set the widnow investment that I love and that you close the document. When I re - open the document window has shrunk and moved to another part of the screen.

  Often the window will be very small... almost half the size of my screen.

  I know that I can use the properties to maximize the window always open to but I work with several documents simultaneously and need access to my other links and expanded running does not allow this.

  Is there a way to keep the wordpad to remember the location of the window?

  And while I'm on this subject, my excel 2000 does the same thing, but it slides to the top of the screen, each opening until the title bar is off the screen (I keep my taskbar at the top).

  Thanks in advance

  Go to start / Control Panel / folder Options / display and check the box next to remember each folder view settings.  If it is already done, this obviously won't work.

  I don't know what else to think.  This should not occur and there is no settings in Wordpad to control this type of behavior (or on the desktop also).

  As far as Excel goes, try to post the question on the Excel Forum: http://social.answers.microsoft.com/Forums/en-US/excslcreate/threads where experts in Excel will be happy to help you.  Maybe this solution will solve Wordpad as well.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• a vertical line white and pink shadow all over the screen

  I bought Dell Inspiron 15r 5521 in February 2013. Recently, the screen becomes pink when I open the lid. I line up the lid of the laptop in an obtuse angle or a sharp angle to get the normal screen.

  And a white vertical line began appearing left most of custom screen.it disappear no matter what.

  I press printscreen and pasted into paint to see if it is a software error. But the fine search. Is it a hardware error? I think it is caused by lcdcable rupture.please help me find my problem

  Connect an external monitor - the fault shows here?  If so, it's probably a bad video chip.

  If not, unplug the system, remove the battery and hold the power for 30 seconds.  Disconnect, then reconnect both ends of the LVDS cable that runs between the motherboard and the back of the display panel.  Check the cable of obvious damage - if it is damaged, replace it.

  If this does not resolve the problem, the display panel is the issue - replace it.

• Second NETWORK card takes over the management network

  I have a lab of dev ESXI 5.5 on a Dell PowerEdge 2950 with a dual port GbE NIC (Broadcom NetXtreme II BCM5708).

  My basic configuration was a port of configured NIC (vmnic0) with a switch (vSwitch0) Standard.  vSwitch0 was a group of Virtual Machine (for VMS) ports and a VMkernel Port (for the management network).  Everything worked well at this point.

  When I try to configure the second NIC (vmnic1) to a different network switch port and different to connect to iSCSI, network range vmnic1 took over the management network even if it does not show as being the management network.  After that, I'm more able to connect or ping the IP of vmnic0.

  When you configure the vmnic1, I added connection Type of VMkernel.  I did not choose to use the port for traffic management group.

  When I look at the console and choose to configure the management network I see only being vmnic0selected network adapter.

  Am I misunderstood the management network configuration?  If not, does anyone have a suggestion on what may be wrong or how I can diagnose?

  Thank you for your comments!

  -Sean

  I think I knew what was going on.

  I had my VMkernel for networking (192.168.2.0/24) in a different subnet to the VMkernel for iscsi link port (192.168.1.0/24).  The problem was due to the existence of a network trace unidirectional from 192.168.1.0/24 to 192.168.2.0/24 (but not in the opposite direction). As stated in the post of the blog below and elsewhere, if there are two VMkernels in networks with a direct route, the esxi host will be simply choose one of the VMkernels to act as the management network (no matter if only one of the VMkernels has active network management).

  I thought my networks did not have a direct route because of the impossibility (192.168.2.0/24) management network to communicate with the network of liaison port iscsi (192.168.1.0/24) but because the 192.168.1.0/24 network may route to 192.168.2.0/24, he made the two viable VMKernels to act as the point of view of the host management networks.

  After that I moved the post iscsi binding to a switch with no network route, my problem has been resolved.

  Re-reading the following is a blog post that helped me to understand my problem.

  http://blogs.VMware.com/kb/2013/02/challenges-with-multiple-VMkernel-ports-in-the-same-subnet.html

  Thanks to those who took the time to review and respond to my problem.

• Pipette takes over the ground instead of color

  I got a JPG image by "Print screen" which I copied in Illustrator CS6, and I'm picking out the color with the eyedropper tool to make a gradient. He takes the colors very well and even lets me copy them into the swatches Panel. But when I try to group the selected colors, or make a gradient out of them, it won't let me and says that you can only do with a "cause". Apparently the eyedropper picks up a 'model' rather that 'color' (although it looks like a color for me; there no "patterns" on the JPG image that I can see); and that's what prevents of grouping them, or create a gradient out of them. Any advice will be appreciated.

  harfad,

  What (in my opinion) tone (which seems to be absent for a while, it's time for tea in the afternoon here) is to:

  (1) with the eyedropper tool ShiftClick the stain on the image where you want to copy the first color;

  (2) in the Swatches palette dialog box, click new swatch and give it a name appropriate, this should create a shade of color;

  3 repeat 1) and (2) for other colors.

  (4) create the basis and ClickDrag gradient color samples down on the relevant gradient (square under the cursor), create new stops and/or move stops as needed.