customizaing no days in the calendar of the adf

Similar Questions

• Marking blocks of days in the calendar

  I use a Macbook Pro running OS X Yosemite version 10.10. 5, but the question applies also to my iPad and iPhone.

  The calendar works fine for the appointment or notice that last less than a day, but I would like to be able to display the time of "blackened" on a certain number of days and to be able to do this in colors different for different "appointments", but who will all see the when I look at the calendar.

  It's a matter of business practices. I am managing coverage of office for a group of people, so I would be able to run a red line through five days to show that Bob will be absent from the Office for this period; and to be able to have a yellow line, which can also be spread over a few days and who may or may not overlap with line out of Bob, to show that Lyn will be out of the Office these days and a blue line for David in the same way.

  So far, I have found that I can set up AN appointment that will remain visible as a line (by putting the cursor on the first day of absence by dragging the cursor to the last day of the period of absence and then titling the "appointment" something like "Bob away"). But if I try to do it with someone else (i.e., I try to add an another "stuck on the protohistory' with a line), and then disappears from the line of Bob and I see David - which isn't much help because I need to be able to see all absences at the same time. (Since I have not found possible to add a second line to all, I obviously also not found anyway to incorporate it in a different color.)

  Is it possible to do this, please? Immensely grateful if someone cracked it.

  Kathy

  This includes covering several events of the day

  Calendar (Yosemite): Events make last one or several days

• How (if possible) I point out a whole day in the Windows calendar instead of just a single event? (With the help of Vista Ultimate) Thank you.

  How (if possible) I point out a whole day in the Windows calendar instead of just a single event? (With the help of Vista Ultimate) Thank you.

  I have no experience with Windows Calendar, but see this article for a bit of luck:

  Customize Windows Calendar
  http://Windows.Microsoft.com/en-us/Windows-Vista/customize-Windows-Calendar

• Citing the calendar in day of the week (Mon, Mar, sea etc)...

  Hello

  How to invoke the native calendar to a specific day of the week, as Monday.

  If today is Monday call for Monday, if today of call Tuesday to next Monday, etc.

  You're right, official docs seems to be inaccurate, it must be:
  Action: "bb.calendar.OPEN."
  MIME: "text/calendar".
  Data : '? "view annex = & date = MON Jul 20% 2027% 202015.

  'view' application works and will actually view day but date of query does not work, although I respected the date format required in this doc:
  https://developer.BlackBerry.com/native/documentation/device_platform/invocation/calendar.html

  I tried with a few different date format but cannot make it work.

• Change of blackBerry Smartphones first day of the calendar

  I want to change the first day of the week.  I looked around in the menus of the storm, but I don't the have not found.  Where can I change the first day of the week in the monthly calendar view?    Thank you

  Open the calendar, press the menu key, search 'options' and select it, choose 'General Options '. You should be able to understand the rest .

• Recurring appointment Set for certain days of the week each month in the calendar on Surface RT?

  It seems to me that this is not possible, but is there a way I can put a recurring appointment for a certain day of the week of each month in the calendar on the Surface RT? For example, a meeting Tuesday on two or one excursion each fourth Sunday?  I know that this is possible in Outlook on a PC and I would like to do it on the Surface RT as well.  Most of my recurring appointments are of this type.  When I recur every month on the Surface, it just sets it for the same date (for example the 12th of each month) instead of the second Tuesday.  Thank you!

  Hi Lisa,

  You were correct when you say that 'it seems to me that's not possible. ' The recurring appointment for some day of the week each month in the calendar on Surface RT cannot be done by date and not day.

  Good day!

• Why Windows 8 'Calendar' app has no option to change the first day of the week?

  Why can't I change the first day of the week in 'Calendar' app?

  Hi Andriamparany,

  Windows calendar - like some other ' standard' Windows 8 applications - is pretty basic and was obviously designed to speed up tasks 'on the fly'. As soon as it comes to advanced settings for these applications, you will need to upgrade to the "long" version

  A good example is changing the 1st day of week / time of starting the day... To do this, you must go to http://Outlook.com (what I called the "expanded version" of Windows 8 Mail, calendar, people... APSS). So, from your browser preferred:

  • Open http://Outlook.com and enter your address email + password if necessary
    ==> By default, it displays your emails
  • Click the arrow to the bottom of the Panel that is located next to Outlook - upper left corner of the page
    ==> This shows 4 tiles: Mail, people, calendar and SkyDrive
  • Click on the calendar tile
    ==> That displays your calendar
  • Click the Options - just before a blue ? - link in the upper right of the screen

  Don't forget to save your changes when you have finished...

  Hope that answers & help

  See you soon

  LZ.

• Count of the number of days in a calendar month according to the year

  Hi all

  On my table, column 1 is the list of months over several years.

  Column 2 is the activity number od each month.

  Column 3 I want an average rate of activity per day during the month, which should be: (C2 / number of days according to C1) %

  Problem: I can't find a fomula give me the number of days, particularly in February when the year is leap.

  Any help is appreciated.

  Thank you all,

  Lopez

  PS: by the way, with this new version of Apple Comunity I seem to have lost my previous questions about the numbers.

  

  Hey Lopez,

  EOMONTH(A1,0) (end of month) will GET help you.

  Column B is Date & time format to display only the month and year (actually the 1st of the month, but the day is not displayed).

  

  Formula in C2 (fill down)

  = EOMONTH(B2,0)

  The end of the month 0 months later.

  

  Formula in D2 (fill down)

  = DAY (C2)

  February 2015 (non-leap years) shows 28

  February 2016 (leap year) shows 29

  Kind regards

  Ian.

• Calendar of the days of the week

  I did a VI gives the date and time as a string of characters.

  I would like to have the n ° of the day of the week (value between 0 and 7) rather than son abbreviation.

  How should you configure the service pour have a number?

  Thank you pour your answers.

  Here's how you can get the number of the day of the week; Sunday as the first day. I leave it to you to concatenate the information into a string of characters to the desired format.

  The attention without delay loops which will load the CPU at 100%! I allowed myself to make some changes to your example.

• not all the events of the day on the notification screen

  Hello

  I can't get all the events of the day in the calendar widget on the screen of the notification of my iPad. Genius Bar and Apple Support are unable to solve. Can anyone help?

  Thank you

  for this I think should download sparse, ultra calendar application very simple, advanced and simplified

• Selection field of the day of the week as the appointment screen

  Hello

  I am developing a screen exactly similar to the ' screen new appointment "in the calendar application. But I can't find any appropriate UI component to expand the field of selection of the day of the week.

  In the 'new appointment screen of origin', this field of choice in week appears when you select "weekly" in the choicefield "recidivism". There are 7 characters, one for each day of week & you can select / deselect a day of week by pressing the space bar.

  Now, can someone please give me an idea on how to develop this field?

  Thank you.

  Hello

  Add HorizontalFieldManager and add ButtonFields on measurement (method overload f.e paint.).

  ButtonFieldListener is added to the custom field button.

  If selected the day of the week (given by the manufacturer) paint "BOLD", and another not.

  Kind regards

  Jochen

• Schedule of blackBerry Smartphones, day of the week and no weekends

  I need to make a call every day at the same time, Monday to Friday. How can I configure the calendar for Monday by induction Friday and not the weekend?

  Thank you

  Go to your calendar, select the day you want to start everything for example today, Agu.4 Monday 2008. Select your time as a normal date, set your details as usual, now under Select weekly recurrence, you will see a planner 7 days pop up. S M T W T F S.  "BOLD" of the Agenda 7 letters are selected days. Choose the days you want to be, below that you will see the END of installation: choose never, this will make continue nonestop unless do you stop by going in your calendar and removing.

  Hope this helps

• How to get the last business day of the previous month?

  Hi all

  We need the user as below,

  If the user select 18 June 2015 ' quick dashboard as the input value, and then they want to see last month last day of work (business date: 29-may-2015) amount in report, if you have an idea please share with us.thanks

  Note:

  use under request we can able to get the last day of the previous month, we want to for the last business day of the last month, based on the date of entry of the user?

  TIMESTAMPADD (SQL_TSI_DAY,-(1), TIMESTAMPADD (SQL_TSI_DAY, DAYOFMONTH ("DIM_TIME". ("" DataDate ") *-(1) + 1,"DIM_TIME ". (("" DataDate "))

  Thank you

  Deva

  Try this,

  case when Dayofweek (timestampadd (sql_tsi_day, Dayofmonth(Date '2015-06-15') *-1, Date ' 2015-06-15')) = 1 then timestampadd (sql_tsi_day, (Dayofmonth(Date '2015-06-15') *-1)-2, Date '' 2015-06-15) when Dayofweek (timestampadd (sql_tsi_day, Dayofmonth(Date '2015-06-15') *-1, Date ' 2015-06-15')) = 7 then timestampadd (sql_tsi_day, Dayofmonth(Date '2015-06-15') *-1-1, Date '' 2015-06-15) another timestampadd (sql_tsi_day, Dayofmonth(Date '2015-06-15') *-1, Date ' 2015-06-15') end

  As Ftsiot said in this post, it will work only to exclude the sat and Sun. Another one if you want to exclude regional holiday, you may need a calendar in DB table.

  Thank you

  AJ

• 14 days on the payroll

  
  Hi all

  We are about to implement the Oracle HRMS R12 module. Could you let me know if it is possible to configure the module so salaries are automatically calculated and paid on a basis of 14 days instead of weekly or monthly, every two weeks?

  Thank you in advance,

  Astrid

  Hi Astrid,.

  According to the law, you are, you can use one or all of the below.

  PERIOD_TYPE	NUMBER_PER_FISCAL_YEAR
  Week	52
  Ten days	36
  BI-Semaine	26
  Semi-Mois	24
  Lunar month	13
  Calendar month	12
  BI-Mois	6
  Quarter	4
  Fort	2
  Year	1

  Why don't you use a Bi-semaine, which is the same as 14 days? The bi-semaine would be 26 periods in a year.

  See you soon,.

  Vignesh

• AS3 how to change picture every day of the week

  Hi all! IM pretty new to Flash and im trying to make this calendar thingy and I need to get a different image to show every day of the week. as every Monday has the same image and so on. THX I advance

  Based on what I can find that error is normally associated with a problem of path/name of the file you are trying to load.  If you test the fla in Flash, then the image must be in the same folder as the swf file that gets tested.

  You did a good job with the code.  The only thing I see that you probably want to change is to replace the name of the file with the value of the table.  You really need not variable in week if you use it somewhere else then it could be used as follows...

  my_loader. Load (new URLRequest (weekDay + ".jpeg"));