Customize does not work in OSX El Capitan

Similar Questions

• My old version of photoshop CS5 does not work in OSX El Capitan

  My old version of photoshop CS5 does not work in OSX El Capitan. Is it possible to fix this or do I have to update photoshop?

  Yes, you should be able to open the files of the 5 CC of Photoshop CS.

  Also, there is not much difference in the toolbar.

• [Creative cloud] does not work [on OSX 10.11.2]

  Creative cloud does not work. I reinstalled it, it worked once and now nothing. So, the adobe web site is very slow.

  Please see the thread where the similar problem was addressed:

  White cloud screen on mac creative

  FAQ: What should I do if I get a blank white screen, spinning wheel, or my CC application does not open?

  Hope this will help you.

  Concerning

  Megha Rawat

• Bridge does not work with Mac El Capitan. How can I make it work?

  I upgraded to EL Capitan OS. Now the bridge no longer works.  I rebooted the bridge, but that does not change. What should do?

  Exactly what version of the bridge?

  CS6 if or an earlier version... is not compatible

  If cloud, make sure you have the latest update

• HP Scanner 3 does not work with OSX 10.9.2

  I have a HP Deskjet 3050 all-in-One a and has recently upgraded to a MacBook Pro with OSX 10.9.2 what printer will print but the scanner will not, error message on the "check with the developer for compatibility with OS" to any attempt to open.  Latest version of the scanner printer listed in Apple Support for printing/scanning software is Version 2.3.1 which is what I have.

  I ran the updates of the client software.

  Does anyone have a solution?

  Hi @RoscoeSweeny

  There is no full feature software and driver of HP, but the pilot of Mavericks v10.9 OS X for your printer is available through Apple Software Update (ASU).

  With this driver, you can still print and scan, you'll just have to scan from HP software. Scan to the computer from the printer control panel is available only when you use the HP scanning software, so it won't work because there is no scanning software HP as part of the Apple Software Update driver.

  Instead, you can scan using,

  • Method: scan from the print window & scanning

• Customize does not work

  Not able to use the customization works after right click on a blank section of the band to tabs and select Customize... The window customize the toolbar doesn't Pern.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Preview of annotation & display does not work properly in El Capitan

  1. I recently upgraded from Yosemite to El Capitan (10.11.4). On my first try of annotation with El Capitan, I can double click and put in evidence or bar, but I can not insert text or shapes (rectangles, for example).
  • When I insert the text, I see a big 'text' in red, but, unlike the previous version, there is no way I can change the "text". In Yosemite, I would have just typing my keyboard, but now, with El Capitan, nothing happens. Otherwise, I could double-click on 'Text', but yet again, nothing happens.
  • When I insert a shape (rectangle), I am unable to move, keep the cursor in text mode.

  2. a second problem with preview, it's that when I open a PDF file, it is added to the previous PDF I'm viewing. When I click on print, the two files to print, which is a boring waste of paper!

  Are these general problems with preview in El Capitan? I must say that when I upgraded from the Mavericks in Yosemite, I was so disappointed with annotation overview that I have installed the version Mavericks (7) Preview next to the standard version (8). I have more the Preview7 app, which I deleted. But maybe, I need to clean the library also files?

  1. click in the text block that said: 'Text' first, and then type.

  2 make sure to close the PDF you were viewing before leaving overview or in system preferences > general: check "Close windows when you exit an application.

• Uninstall does not work CCS6 OSX 10.8.2

  I had to restore OSX HDD from a copy, and when I did, my applications Adobe CCS has stopped working (various symptoms, error messages, crashes).

  I want to get rid of all the suite and re - download and re-install all started with a clean slate.

  Have tried for an hour to uninstall.  Have followed the instructions but when I run the uninstall from the programs adobe installers folder I get a message: failed to uninstall. Your uninstaller met errors.  When I check the error file summary theres a link to the hardware configuration that makes no sense (all programs CCS6 has worked on the computer before the restoration).

  I downloaded the cleanup tool, but the instructions tell you first uninstall the programs.

  I'm stuck.  Suggestions as to how I can get rid of all the suite and start over?

  Run the Creative Suite cleanup tool. Installers can be found here:

  Direct download links for Adobe software

  Mylenium

• Photoshop CS5 does not work on OSX 10.9.2

  "Cannot open the application"Adobe Photoshop CS5.app"because it is not taken in charge on this type of Mac".  Is the error I get after installation, and once I try to open.  I have a Mid 2012 MacBook Pro with 8 GB of ram.

  Any suggestions?

  Your Mac came with the Mavericks, or upgrade from a previous version on the App Store?

  If you upgraded, you installed CS5 previously?

  You have installed the update of java 6 Mavericks? http://support.Apple.com/kb/dl1572

• EL Capitan automatic date time does not work

  People

  I use an El Capitan 10.11.5 MacBook Air version.

  I noticed that the data and time does not work even though it was set to auto to time.asia.apple.com.

  I ran these commands on a terminal

  $ping-c 5 time.asia.apple.com

  Ping: impossible to solve the time.asia.apple.com: Unknown host

  $ping-c 5 time.nist.gov

  PING ntp1.glb.nist.gov (64.113.32.5): 56 bytes

  64 bytes from 64.113.32.5: icmp_seq = 0 ttl = time 44 = 386,629 ms

  64 bytes from 64.113.32.5: icmp_seq = 1 ttl = time 44 = 307,532 ms

  tell me ping works but not for the server ntp - time.asia.apple.com

  $nslookup time.asia.apple.com

  Server: 192.168.1.254 address: 192.168.1.254 #53

  Non-authoritative answer: time.asia.apple.com canonical name = time - ios.g.aaplimg.com.

  time - ios.g.aaplimg.com canonical name = site time.apple.com.

  Site Time.Apple.com canonical name = time - osx.g.aaplimg.com

  $cat /etc/ntp.conf

  Server time.asia.apple.com.

  $ ntpq Pei

  No returned ID association

  Please, back up all data.

  Open the window of network preferences, if necessary, by clicking on the padlock icon in the lower left corner and entering your password. Cllck advanced, open the DNS tab and change the addresses of the servers as follows:

  8.8.8.8

  8.8.4.4

  It's Google DNS. Click OK, and then apply.

  In Safari, select

  ▹ Safari preferences... ▹ Confidentiality ▹ Remove All site data

  and confirm. If you use another browser, clear the cache memory. Test. Any difference?

  Notes:

  1. If you lose Internet access after the above change is made to your network settings, remove the Google servers in the network preferences pane, then click on the TCP/IP tab, then click on renew the DHCP lease. That should restore the original DNS settings; otherwise restore them yourself. Remember that you must click on apply so that the changes take effect.

  2. I do not use Google DNS myself, but I tested it, and I do not recommend it or any other provider DNS; the addresses of the servers are only available for testing purposes. There may be privacy and technical issues involved in the use of this service, that you should personally study before deciding whether to retain the settings. Other public DNS services exist.

• Using the function of scan macOS Sierra HP Officejet 7300 series network printer does not work; He had no problem with El Capitan...

  Printer HP Officejet 7300 network series that allows to work flawlessly with El Capitan does not work after the upgrade to Sierra.

  With macOS Sierra, when used as a network print service printer works fine however scan does not work. Programs like the Image Capture, HP Easy Scan etc does not see the printer. However, if the printer is directly connected to the Macbook Pro using the usb cable, a new printer is added to the list of printers (it shows print and scan functions while the printer network in the list shows only printing function) and the scanner works well with Image Capture, etc. If the usb cable is removed disconnects this printer in the list and there is no way to turn it on. I have the latest update for the printer installed from the App store. It looks like a driver issue, but I wonder if there is a work around for this problem...

  Open Preview.app. Under file in the menu bar, you see import of 'name of your scanner?

• Installed at El Capitan and now HP printer does not work via the network

  Installed at El Capitan and now HP printer does not work via wireless network

  Open system preferences > printers and Scanners and select the print tab.

  Then the right or control click on the HP printer on the left then click: reset the printing system

• Smart translator bought on Apple Store does not work after upgrade to El Capitan

  Hello

  After the upgrade to El Capitan, I installed all my software and downloaded my previous purchases, unfortunately to say the Smart language does not work and I do not know how to remedy this outside the re - buy again.  I searched through the forum, there is nothing to come.  It is not a free software.  Any ideas please.

  Thanks in advance

  rachealfromva

  Have you asked the people that make this software?  It is for them to make it work with El Capitan.

  Take a look at the criticisms of this kind of things in the app store

  

• I've just updated to el capitan. But protools does not work. How can I fix it?

  I've just updated to el capitan. But protools does not work. How can I fix it?

  Probably that Protools must be made day/upgrade. Have you checked for updates/upgrades?

  What version of Protools do you use?

• The CD/DVD does not work with El Capitan 10.11.5 on Macbook Pro

  Hello everyone, I spent the time to research on the here and the other site on why the CD/DVD does not work with El Capitan 10.11.5 on MacBook Pro mid 2009. This discussion forum has said that he will not work with the El Capitan software. Any idea or suggestion? Back to Marverick or Yosemite? I tried to use SMC reset, restart, recovery and still the same issue.

  I thank in advance.

  ~ Mike

  I have my doubts that the (10.11.5) software is the problem.  Are you sure that the DVD player is simply not defective?  Have you tried to clean the lens?  What is the State of the disc?

  Your best option may be a date at a bar in engineering of the Apple store for a FREE evaluation.

  Ciao.