Customize the message "welcome, < user >."

Similar Questions

• Customize the message 'No Rows'

  I have a dashboard that contains 3 reports. This dashboard page is scheduled and sent to users by e-mail. Today, one of the reports led to no line, which caused some confusion about which one of the 3 caused 'no line' situation.
  
  I would like to customize the message so that it indicates clearly what report (name or title) led in a State of 'no line '. Please let me know if you have any ideas.
  
  Thank you
  Dinesh.
  
  This is the message that is currently displayed:
  
  All data is not cause to the specified criteria. This is often caused by the application of filters that are too restrictive or contain incorrect values. Please check your filters to ask and try again. The currently applied filters are listed below.
  
  I want to customize it as:
  
  There is no transaction yesterday.

  Simple solution! In each report, there is a 'No Results' view. Customize as you want and it will appear when there is no record instead of the standard message that you described.

  Bet you didn't know it would be that easy...

• I tried in several ways (in line, calls and return on this forum), but no aid has been granted on Edge inspect.  I get the message "your user name and password are incorrect, or your account has no access onboard inspect CC.  Any assistance

  I tried in several ways (in line, calls and return on this forum), but no aid has been granted on Edge inspect.  I get the message "your user name and password are incorrect, or your account has no access onboard inspect CC.  Any help is greatly appreciated.  One of my original case numbers were: 0216572509

  You need installed Adobe Creative Cloud. Check the link for more information below.

  Edge inspect FAQ EAC

• Customize the Messages of Anyconnect?

  The messages and the guests see users connecting to AnyConnect can be customized.

  Users are often confused by terms such as token vs code access.

  For example, there is a prompt to enter the "next" token code when it is out of sync and just causes confusion.  Users just try to enter their password again and it is not working and then call technical support for assistance.

  We want to customize the text in plain language, so there is no room for confusion of the user to any guests.

  Hello

  Take a look at this document Cisco if it will be useful.

  Basically, you use the ASDM, navigate to the Configuration folder > VPN remote access > access to the network (Client) > AnyConnect personalization/localization > GUI text and Messages and then click the Add button. You can then edit the messages in the file that you created.

• I get the message 'c:\users\AppData\Local\Temp\7zS448\Setup does not find this file"while trying to install the printer driver

  Original title: \users\AppData\Local\Temp\7zS448\Setup

  I get the message, "cannot find this file" it displays the file in the tool bar, c:\users\AppData\Local\Temp\7zS448\Setup. This happens when I try to install the driver for my HP PhotosmartC3150 on my laptop HP Pavilion with Windows 7. When I click ok, the installation stops. Doesw anyone have suggestions?

  Thank you.

  Hello

  Welcome to the community of Microsoft and thanks for posting the question. I've surely you will help find a solution on the issue.

  Method 1:

  Unnecessary files on your hard drive, disk space and can slow down your computer. Disk Cleanup removes temporary files, empty the Recycle Bin, and removes a variety of file system and other items that you no longer need.

  Delete files using disk cleanup

  Try to install the driver now.

  Method 2:

  Step 1: Clean boot

  Put the clean boot computer and try to install the driver.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Once you are done with the boot, follow step 3 in the article by putting your computer to normal startup.

  Step 2:

  You can download the drivers in the article below:

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=1146516&prodTypeId=18972&prodSeriesId=1146511&swLang=8&TaskID=135&swEnvOID=4063

  Method 3:

  If you are unable to install the driver, I suggest you to run the Fixit provided prior to installation.

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/program_install_and_uninstall

  Hope this information helps. Please reply with the status so that we can help you.

• On the start screen, I get the message: "C:users\acer\AppData\Temp\_ME124042\Python27.dll (error Code 5).

  Original title: Dll error

  At the start I, a screen opens with this message: "C:users\acer\AppData\Temp\_ME124042\Python27.dll (error Code 5).

  I have problems with the game to the top of the files as well. Error number 5 keeps popping and I can not install unless I have run as administrator. I can't understand this. Could I have some clarification on this? How to fix this?
  Help please.

  The bottom worked for me

  1. Open Windows Explorer.
  2. Paste this ( %UserProfile%\AppData\Local\ ) in the address bar.
  3. Right-click on the Temp folder and then Properties - Security tab - Advanced button.
  4. Click the button Change Permissions .
  5. Remove all permissions.
  6. Select the entry for your username, then click on Edit .
     • Include the permissions that can be inherited from the parent of this object.
     • Replace all permissions of child object with permissions inheritable of this object.
  7. Click on OK .

  

• Apex number field. Format mask. Customize the message.

  DB 11g

  Apex 4.2

  Theme 25

  I have some number with format 999G999G999G999G990D00 mask fields. For example a field as 'special delivery '.

  It works very well. But if I get a few alphabetic characters, it gives the error message "Special Delivery Charge does not match the 999G999G999G999G990D00 of format number (example: 1,251.49). .

  Is it possible to customize this message.

  Thank you.

  Or the most elegant way to keep the number format and just 'translate' the exact text message in shared components - SMS - create a new one with the name of: APEX. NUMBER_FIELD. VALUE_INVALID2

  See: the globalization of demand management

  Thank you.

• Customize the options of users as part of RMC Portal

  Hello guys,.

  I have deployment MCU (4510) with TMSPE (1.5) / conductor (XC4.0). Users have asked on RMC portal customization. is it possible to customize option as:

  -Remove the numbering automatic option of CMR user portal (to avoid the miss use of this option by users)

  -Change the audio input to the CMR

  -Custumisé background image for the conference room.

  Any information will be very useful

  Kind regards

  Indicators of audio join / leave will work because they are a system wide setting that will be working with and without a conductor, conductor just control how conferences are created and managed, not the conference settings large system.

  The AutoAttendant MCU will still work with the conductor, but as mentioned, conductor is not aware of the auto attendant MCU, so all calls using driver cannot access.  In order to access the function of automatic monitoring even when you use the conductor, you may call the MCU directly via its IP address.  Here are a few requests for improvements to the standard automatic MCU and conductor: CSCug43183 and CSCul19411.

• Customize the Message for PUA

  Dear all,

  Can customize us the text on the Web PUA page for guest user? as the display instructions to the proxy server in the browser settings.

  Thank you best regards &,.

  Guelma

  This can be done in ISE 1.2. Please check the following picture

  

  I think that ISE 1.1.x can do that too, I'll test it tomorrow. Please rate if this can help

• Is there a setting to have the message to users when a technical object is already open for editing?

  We are on v6111 and enjoy the warning message that informs the user of the second when two users have edited the same technical object and changes of the first has already been saved.  What we are facing is users who want to know that someone else has already opened the technical subject to change.  Is there a configation for this?  Users do not like to be informed after they enter data that someone else already saved a different edition... they would like the warning before doing the real work because it feels like a wasted effort... If the accused in advance, they can come back and do the data entry later.  We try to find the appropriate configuration option to set the warning message in the appropriate UX process / calendar.  Thank you!

  OK Ron, we will get the UX/ER process began with the OS.  Thank you.

• Dynamic action to refresh the region-> see the message to user

  Hello

  I have a page in the apex 4.2.2.

  In this page, I have an interactive report and a filter sets, users can choose.

  When users choose one of the filters, I implemented a dynamic action to refresh the interactive report region, so it should refresh the data being shown without submitting it.

  So far so good... but... when the region is refreshing there is point 'charge of circle' which displays and allows the user to know he is done on the page. But this icon is not so obvious.

  What I want is to add a message, for example to display a region, which showed a message like "being the updating of the report, please wait" (something like that).

  I tried to insert in my dynamic action, as 1st action, to SHOW this area and as the last action to HIDE. But nothing is done, the region is never shown.

  How can I perform this task? All I need is to be able to display a message, for the duration of the dynamic action, to inform the user that he or she must wait until the task is completed.

  All real common actions have been reported to "wait for result", if I didn't get this wrong, it means that he expects the previous real action remaining to be done, in order to trigger the next... This should show the region and then hide it, but it does not work.

  Can someone help me with this? Maybe give an idea?

  Kind regards.

  You can actually go several routes with a solution for this. A refresh of the IR will start forward and after updating the events that you can hang on to dynamic actions or jQuery, so you can show something at the start of the update and then hide it again. And since you can do all this in jQuery you could easily hold it in a javascript file and attach it to every page of the ir. This is probably the cleanest solution and more independable.

  Another way is to use the already existing waiting icon and play with his presentation a little. You know, that you are talking about loading icon. You can change this to something much better with minimal effort!

  Example:

  Run when the page loads, to execute javascript code:

  $("#apexir_LOADER").append("
  Please wait. Refreshing the data.
  ");
  

  Add this css to inline css in the page:

  span#apexir_LOADER {
  display: block;
  width: 150px;
  text-align: center;
  background-color: white;
  border-style: solid;
  border-radius: 5px;
  border-width: 2px;
  top: 20%;
  }
  

  It'll make a little white box with black borders rounded around the loading icon and put a text below.

  You can get the html code to add a bit more generic, or you can raise some html of the page if necessary. You can put it in a dynamic action on the load, put in a js file, or whatever. The css can be put in a page template or a css file.

  It's only less independable hanging in front or after updating because we are taking advantage of the system in place, which means that maybe he could change in the future - but this is hardly on the same scale as the 'hacking' the ir for example javascript.

• Get the message "service user profile Service does not have logon user failed to load profile

  Have you tried "Fix a corrupted user profile" and have gotten to the point 5 "locate the C:\Users\Old... Username folder... but I can't find it.  My husband and I use the same computer, his site is OK then passed by him to try to challenge mine but not luck. What I am doing wrong?

  Have you tried "Fix a corrupted user profile" and have gotten to the point 5 "locate the C:\Users\Old... Username folder... but I can't find it.  My husband and I use the same computer, his site is OK then passed by him to try to challenge mine but not luck. What I am doing wrong?

  First line of action is to do a system restore, if you remember a 'good' date when you didn't have a problem. Use this good date as your restore point.
  Do and go to safe mode to restore your system:
  Here's how to get safe mode:

  Shut down your computer > turn it back on and immediately and repeatedly tab key F8 until you see a black and white screen. The top/down arrow and select Safe Mode.

  System Restore:

  Start button > Search box, type system restore > press the Enter key > uac prompt > click on choose a different restore point > next > select dates as your restore point, until the click > next > finish
  To sit and wait. The machine restarts when it's done.

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• How to customize the windows welcome screen 7?

  Is it possible to change the standard background image that appears when the Welcome screen is displayed after the start? If this standard image of windows 7 may be changed, please provide instructions not to not showing how it can be done.

  Thank you.

  Step 1: Open the Windows Start menu and type regedit in the search bar.

  Step 2: right-click on HKEY_LOCAL_MACHINE , then select Search.

  Step 3: Search for OEMBackground, which should be in Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Authentication\LogonUI\Background. If the key does not exist, add a new DWORD value named OEMBackground.

  Step 4: double-click the OEMBackgroundentry and change the value from 0 to 1.

  Step 5: Open Windows Explorer and go to the following path: %windir%\system32\oobe.

  Step 6: Create a new folder named infoand open it. (It may be already created)

  Step 7: Create a new folder in info called backgrounds. (It is usually present.)

  Step 8: Rename your wallpaper desired as backgroundDefault.jpg and place it in the bottom of the folder (images must be less than 245 KB).

  Note: the first four steps are not usually required. At least on my PC, only the last four steps are needed.

  You can also use this app-http://www.techspot.com/downloads/4902-logon-changer-windows7.html

• I get the message 'service user profile service has no connection. User profile cannot be loaded ".". What can I do?

  I was told to open a new profile and transfer the files, but I need the administrator password which I do not remember. Help!      I am not a computer expert, so any help will be great.

  Thanks in advance, Dave

  No way to recover passwords, but there are ways to reset it - but it is a Microsoft Supported Website and we are not allowed to provide details by Microsoft Policy.

  "Policy Microsoft about lost or forgotten passwords"
    <>http://support.Microsoft.com/kb/189126 >

  My best advice to that end would be elsewhere in Google.

  Another solution would be to create a free rescue like Hirensboot CD.  If you boot from this CD, you should be able to use this system to run a chkdsk on your HDD operation

  HTH,
  JW

• Change the message OBIEE

  Hi experts,
  
  We use OBIEE 10 g, whenever a user enters the wrong UID & PASSWORD while connecting to OBIEE, they receive the following message from default OBIEE
  "
  Unable to connect an invalid username or password was entered. »
  
  is there a way we can personalize this message?
  
  In fact, we limit some users to connect to OBIEE based on block initialization, if we want to display a different message on their part. Is there a way singing that we can customize the message for a different set of users?
  
  Thanks in advance

  Check these files from OracleBI\web\msgdb\l_en\messages below

  catalogsysmessages.XML search keyword below
  kmsgCatalogSysInvalidUsernameOrPassword--> invalid user name or password has been entered.

  logonmessages. XML
  kmsgAuthenticateUnableToLogon---> "Unable to Log In"

  Appreciate if you mark as correct