Customizing the view VM & linked Clone

Similar Questions

• Problem with the floating linked clones and Persona

  Hello

  We run a build view Horizon 6.2.0 - 3005368.

  Just improved our VMware environment to 6.2 and installing an APEX 2800 PCoIP card on our guests.

  I had a pool of office dedicated clone bound for users.

  Now, I made a new image of master and made a new Automated Desktop Pool pool who are floating clone related.

  With the dedicated bound vmis, we place disc profiles of users etc are located.

  With the new pool, I'll use Persona. I followed this guide - http://terenceluk.blogspot.no/2012/10/configuring-roaming-profiles-with.html?showComment=1445933020356 and it works very well indeed, almost.

  For users of a trial, I can see that if something I save it to the desktop, it will be saved on the server of file \\fileserver\redirected$\%username%\Desktop

  When I use my user and try to even something on the desktop - it c:\%username%\Desktop

  I tried to reset, remove my user etc., but it's not. All the settings I made in the GPO - Computer Configuration-> administration-> classic administrative templates (ADM) models-> Configuration of the VMware View Agent-> Persona

  Management-> Folder Redirection

  But my users settings are only "local".

  How is it?

  This can be caused by an incorrect action or NTFS permissions on the redirection of folder/persona.

  She is also due if your user account has a profile on the parent whose linked clone desktops are created.

• How to migrate Office persistent link clones of workstations for the new data store

  Hello. We have clones of persistent link to view running in the environment from our view. We need to migrate these desktops to new storage. Rebalancing is out as this will include a refresh operation - destroy anything and everything installed in c:\ of the user. Is there a method to migrate Desktop clone link persistent to a new data store, while keeping the office in the same exact state (i.e. c:\ is not updated).

  Thank you

  Never say impossible. I came across the solution when I read the article by Duncan Epping:

  http://www.yellow-bricks.com/2012/03/15/Dr-of-view-persistent-linked-clone-desktops/

  I have that for my situation. Basically, replicate data from view in the new storage warehouses. Set up data warehouses replicated without re-signing with the cluster of ESXi. Turn the power off and unsubscribe the vCenter view workstations. Save the workstations from the data store replicated/mounted to vCenter and power over desktop computers.

  VCenter, nothing dramatic has happened if she sees just as vm being unregistered and re-recorded activity from the same exact data store (the same UUID). View Admin is happy because he sees just the events as desktop computers that have been turned off and then subsequently in reverse. Nothing has changed regarding the database to view ADAM, we still use the same data warehouses.

  I have already tested before for a scenario of View DR, and he succeeded. Between remembering who and Duncan's article helped me to adapt the same process for this. Nothing is impossible

• Virtual office to backup VMWare View linked Clone

  Hi all

  I would like to know what the best method is to save the virtual office linked clone on VMWare View. For the moment, I use the latest version of vRanger Pro connection with VCB integration.

  I don't know if I should save the linked clone himself or the parent VM. What the parent snapshot?

  Please advice. Thank you.

  Sang A

  in a persistent pool would really matter because there is no guarantee they would never return the same office again.  If you have a properly configured user environment then persistence or no persistence would not matter that the data would be stored in a place that would be subject to a backup system.   I don't understand the need to safeguard a VDI guest.  back to top comments templates, view servers and the vCenter server.  Comment no way.  backup windows are pretty long already to go back up throw away from devices.

  If you have found this device or any other answer useful please consider useful or correct buttons using attribute points

  Tom Howarth VCP / vExpert

  VMware communities user moderator

  Blog: www.planetvm.net

  Writer for the next book ' environment virtual VMware Infrastructure Security: securing ESX and virtual. "

• How to change the computer name of existing desktop computers linked clone pool?

  Hello

  I'm curious about something that has developed in our Organization.  New guidelines came down and we have to change the name of the computer for all of our offices to meet the new criteria.

  I have many of our users is on the offices of Linked-Clone (automated pool, dedicated, assignment see 5.1) which will have their names have been changed.  I use a 'model' for the name of the computer.

  I tried this before by simply change the settings of the pool, and then recompose the pool.  Recompose worked well, but NONE of the virtual machine names have been changed.  All machines, recomposed just fine, but keep the old name of the computer (non-compliant).

  How can I change the name of the computer of my clone in an existing pool offices?  Maybe I have something wrong.  I'm doing it instead of having to create a new pool and move the persistent disks.  I would like to change the name in the settings of the pool and recompose, but it did not work.

  Scenario:
  See 5.1

  Automated cloning related pool

  Assignment of dedicated (persistent disks)

  Thanks in advance

  It is not possible to change the name of existing workstations by modifying the settings of the pool. There is no way to make this happen automatically and in doing so manually would not seen happy.

  Unfortunately, for dedicated pools, you will have more work to do. If you do not use Persona you detach the persistent disks and recreate virtual machines in the pool with this disk to create a new virtual machine with a new name to be generated.

  If you use Persona you could remove all virtual machines and have Persona to extract profile data down to the virtual machine that would be entitled to the user when they connect then. This will cause all user installed programs go, but I hope that's not common if you are already using linked clones.

  I encourage to go to the next page, click on the feature request form link and publish information on what you're trying to do:

  https://www.VMware.com/support/policies/feature.html

  Notifications about features are reviewed by VMware and if you can get enough of your friends/colleagues notice to users to ask something often a solution will grow in any kind, nature or form.

  Hope this helps.

  -Mike

• time zone problem schedule vCAC Advanced Service Blueprint, VCO Linked Clone Workflow, setting

  If I have problems when you request a catalog from a VCO workflow built-in VCAC article.  I use the workflow VCO "Linked Clone, with a single NETWORK card and Windows credentials" located in VCO under vCenter > > Clone > > Clone bound > > customization of Windows.  I can go through the workflow very well in VCO, but I want to make it available via vCAC.  When I try to download a virtual machine using workflow, the application process fails using the form in the time zone of the form section.  There seems to be a problem with vCAC questioning vCO for doing the research for the appropriate time zone setting.  The application works very well since within vCO, but not inside vCAC.  Thoughts?

  Jeremy

  I ended up using a vCenter customization specification to achieve this.  It turns out that the specification is as a safety net that will configure everything that is defined in the specification, unless there is a custom property configured on the action plan for this setting.  If this is the case, the custom property takes precedence.

  Jeremy

• Best practice help to spend again vCenter with linked Clones

  Hello everyone

  I searched for days, but couldn't find a way clear of hover over our view 5.2 installation of a new vCenter.  The equipment was aging, and we decided to upgrade and move to 5.5.

  We have rebuilt and forwarded via our guests not VDI to the new vCenter 5.5 environment. I found a few documents, but nothing that tells us if it can be done actually.

  We tried to go in the service of the composer initially to the new instance of vCenter and maintenance, we do the DB on the old Victoria Cross, if it worked I émigrerait the DB above the new Victoria Cross

  We first tried these steps however VMware Documentation Library after removing the old VC service composer and installed on VC New (with ODBC connections mapped to the old VC) it wouldn't work.  We were moving to the VC 5.1 leaving guests ESXi running VDI attached to 5.1

  Then I did more research and discovered the related clones are all related to the database of the old VC and moving them is not possible per this KB KB VMware: workstations managed by moving between servers view vCenter is not supported

  I saw an article here that suggested dumping a bunch of DB and rebuild the new VC with the same name and IP address, but I can't do so because the new instance is already upwards and on a new host name / IP migrate view VCenter (with linked Clones) to new hardware

  I also found this where someone is in the same boat and suggested to recreate pools.  The discussion is not in the details so I wonder if someone can clarify this: migration View Composer and vCenter

  I have about 20 people on VDI in a combination of clones using 3 connected pools and personal drives.  Given that all the info from linked clone was linked to the former base of VC, it doesn't seem wise to move it to the wire.  This would be possible: I still have the base image with all the snapshots for each pool.

  • Persistent backup drives
  • Note the configuration of each pool
  • Disable the commissioning
  • Create DB on VC 55 composer vacuum
  • Create the ODBC connection for composer on VC 55
  • **
  • Do more ESXi hosts to 55 VC
  • Remove existing VMs (will be not able to connect to them at this point anyway)
  • Remove the old VC entry admin view / delete existing pools
  • Install the composer on 55, and then tap new ODBC
  • Create new instance vCenter in Admin 55-pointing mode
  • Recreate pools
  • Import and attach persistent disks (http://pubs.vmware.com/view-50/index.jsp?topic=/com.vmware.view.administration.doc/GUID-BDFCCEC8-682F-4421-8810-06108CBE8D20.html)
  • Recreate events empty DB on 55
  • Reconfigure the parameter DB events in Admin mode

  Any help would be greatly appreciated as I can't find an exact way to do

  Well, I'm pleased to say it worked! I had a few problems by removing existing pools. View repeated deletion but nothing happened. In the end I had to use ADSIedit to connect to the server to manually remove all the old discs VM and pool

  After the installation of the composer on the VC 5.5, I was able to create a login in admin mode and then start to re - create the pools.

  We were able to successfully reattach each disc persistent owners planned.  Did some spot checks and desktop users, bookmarks etc. all worked

  It is a tedious process, but it does not work. I hope that VMware can create an article for it.  God knows that I searched for days, I had to read a lot of things just for this plan.

• Linked Clone pools with fast and KMS

  Here are a few things I'm still not clear on?  (1) what to choose fast as my process for related clones, creating bound within view Admin clone pool?  (2) where point desktop clone related newly updated to point to the KMS server?  (3) therefore to create a pool of related cone that I have to turn off the Parent virtual machine and take a snapshot and then choose this snapshot when I go to the floating pool linked clone process, correct?

  When you create the master vm and before taking snapshots, make sure that its using the kms client.  Any machine that uses this key automatically discover host kms on your network and activate.  There is no need to specify in the settings of quickprep.  When I was with sysprep I put the key client kms in customizers, but quickprep just takes what is there and use it.

• SYSPREP for windows 7 64 bit linked clone pool

  Hello

  I'm trying to set up a cloning pool of VMWare View related with desktop windows 7 64 bit, but I'm having a problem with the sysprep command.

  Maybe I did something wrong in the process.

  Here's what I did:

  * installed Captain VM

  -> install a new windows 7 VM 64 bit VM (Ultimate Edition)

  -> tools VM installed in the virtual machine

  -> installed the agent of the view in the virtual machine

  -> the master VM has added to the domain active directory

  -> power off of the master computer virtual

  -> taken a snapshot of the master computer virtual

  * Make the necessary prepearations ActiveDirectory

  (creation of the organizational unit, etc.).

  * enabled View Composer in view administrator

  * created the linked clone pool:

  --> in vCenter settings, I chose the parent VM

  + its snapshot

  -> I also published the snapshot to the forwarding server

  -> in comments customization settings.

  I chose the sysprep method

  -> 2 windows 7 syspreps were awailable to choice:

  'WIN7SP01' and 'WIN7SP1 '.

  -> I tried the procedure at a time

  Added some rights for some users to

  the linked clone pool

  All the steps of the pool of linked clone in view administrator configuration worked without errors, the linked clone pool has been created successfully.

  THE PROBLEM:

  When I try to connect to the clone related with the Client view, pool

  It gives me the following error:

  "This Office has currently no sources of funds available, please try to connect to this desktop computer later or contact your system administrator."

  When I watch the console of all (10) desktop virtual machines in the vCenter.

  I see the following error message as a popup on each of them:

  "Windows could not parse or process the answer without assistance for pass file [specialize]."
  

  "The settings specified in the answer file not applicable."
  

  "The error was found during the processing of the component parameters [Microsoft-Windows-Shell-Setup]"

  No idea what I'm doing wrong here?

  The 2 syspreps that I could choose when creating pool related, "WIN7SP01" and "WIN7SP1."

  were there to choose just like that, I've never done anything to create, is this normal?

  If Yes, what is the difference between WIN7SP01' and 'WIN7SP1 '?

  any ideas?

  "I've seen this before and I will say it was because of some kind of defective license referred to in the specifications of customization, which in your case would be WIN7SP01 ' and 'WIN7SP1.   These are not created by the sight and were probably created by the person who manages the vCenter instance because that is where they are stored.   I would check that the license specified with these customizations key are the correct keys to use with WIndows 7 X 64 machines.

• VMware Linked Clones in vWorkspace

  Hi all

  I am currently working on a proposal where client insist on the use of the VMware hypervisor as the note of calculation. I have some research in the related Clones and basically its similar to what the differencing disk VHD got to offer. My main concern here is so we can use the technology VMware Linked Clones to deploy persistent desktop or is it only for non-persistent desktop mode? How about storage if economies compared to the disk hard virtual differencing disk? What is the estimate of the use of the delta of a typical user based on your experience? Thanks for the advice!

  Kind regards

  Cyril

  Hi Cyril,.

  I can answer some of your questions.

  You can use a clone bound like a persistent desktop computer, it does not work.

  After a while, however, the linked Clone will be so different from the image of the mother, it will become very swollen (for example, updates of Windows to go it would be applied to each clone bound, user installed Apps, etc.)

  I know some customers like to capture profiles on persistent desktop computers so that they can periodically update the image of the mother and redeploy related clones from there. It works well to keep the machine day and bloating under control. The obvious drawback being any user installed apps would disappear, but it all depends on if you allow them this level of customization.

  Thank you, Andrew.

• The dynamic header link

  Hello

  I am currently working on a mall built around a dynamic content, which will display the content of the email in different languages depending on the destination country.

  My question is related to the email header - specifically the link in the online option. This will default e-mail content or it will show the end-user version of mail that they received through dynamic content?

  Case example:

  -Content dynamic watch mail to a user based in Germany in German. The default e-mail content is in English. User clicks on the dynamically populated header 'post online '. Where Eloqua him--brings to the English version by default or the content in German, he received?

  Any adviser or appreciated experience.

  The 'View Online' link will display any content that the user sees in an e-mail - the only difference is that it will open in the browser of the user by default. There are sometimes differences in formatting between an e-mail client and web browser, but any dynamic content that you have enabled will conform.

  Of course, it is always best to test first by sending the e-mail to several trials of contacts and try all test cases that relate to your email.

  

• ESXi 3.5 U4 - linked Clone... is it still possible?

  Dear all,

  I have been using ESXi 3.5 (free license) for some time and use the script of "linked clone" available here: http://communities.vmware.com/docs/DOC-9202 I understand numerous messages on these forums that VMware have now patched/fixed for access in RCLI writing ability and so the script above no longer works. While it is an understandable gesture of VMware to protect its products, cause us me some questions that I really consider to create a linked clone and therefore very quickly deploy a new virtual machine.

  From my own research, I have a workaround, (its not terrible but works), essentially the following script available here http://engineering.ucsb.edu/~duonglt/vmware/ (note not my work) run a clone linked in a few steps (note brief simplified presentation):

  (1) copy the .vmx config files and the master VM .vmxf to the new location.

  (2) change the new configuration .vmx file to point to the virtual hard disk to the VM master.

  (3) save the new virtual machine (essentially adding to the inventory of ESXi).

  (4) create a snapshot (using the new configuration .vmx file), thus creating a new virtual hard disk to store the changes (or differences).

  Personally, I think the author of the script deserves a lot of credit because the technique is very neat.

  In ESXi 3.5 U4 functions within the RCLI used to perform steps 3 and 4 are no longer available because they require write access. My solution is to run steps 1 and 2 of the script (as before) followed by using the VIX API to register the virtual machine and create a snapshot. This work, however, does not require a running two separate programs. When I looked at using the VIX API, I noticed a function called "VixVM_Clone" which is able to create full clones and related first of all clones, but guess what - Yes it's true that this is not supported in ESX or ESXi.  Note here the VIX API support matrix: http://www.vmware.com/support/developer/vix-api/vix16_reference/supportMatrix.html

  I hope that work around it above will help others and please if anyone has a better solution, perhaps they would be kind enough to post...

  Yes, the two linked Clones script always works. Scripts do not use the VI API, but the Service Console on ESX classic, and the console Busybox not supported for ESXi, where he won't suffer by the fix introduced with ESXi 3.5u4. This is also true for ESX and ESXi 4.0, a small minor fix will have to turn off checking with vmware - v version has changed slightly with its output, but the fundamentals of the script is exactly the same and still works.

  Glad you're enjoying the script

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  repository scripts vGhetto

  http://Twitter.com/lamw

  If you find this information useful, please give points to "correct" or "useful".

• Linked clone is not the deletion of the Horizon view administrator

  I am trying to remove a linked clone (and pool that linked clone). However, he advised that is the removal of more than 12 hours. I think that the problem is that someone has tried to connect to this virtual machine before fully completing commissioning. The only other VM in the pool view Horizon has deleted without argument. Is there another way to remove this virtual machine?

  See you soon

  

  Hello

  Please find the following article to remove orphan console machines manager view. It will be useful.

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1013760

• VMware View Linked Clone pool - SID change of virtual machines

  Dear community

  This morning I had the good idea to use instead of quickprep sysprep to change the SID for all virtual machines in the linked clone pools. Why? Because the customer didn't only VMs and use KMS to activate Office and Windows, therefore at least 50 different sid. Well, I created a file of OS customization invited for Windows (OS is Windows 7) in vCenter (which is connected to view admin) and I did:

  Target Machine Virutal OS: Windows

  Use custom Sysprep answer file: No.

  Name: The name of the file

  Owners name: xy

  Owner organization: xy

  Diabate

  VM name: Use the virtual computer name

  ProductKey: Leave blank

  Admin password: play twice

  ZimeZone: GMT + 1

  Run once: no

  Network: Typical with DHCP

  Domain: Credentials client area incl.

  Operating system options: create new SID

  Finishing, went to view Admin has created a new and Cust comments. to Syprep (Filename). Blended at the pool and it worked very well until the generalization starts... it stucks at regional settings, when I restart the same. When I klick net he asks me for a computer name and a password.

  Well:

  (1) why is this block here? Yes there are still stuck because I was not able to specify a locale, or if it is not needed? Why he can pop up?

  (2) why he asks me for a computername? I told her to use an existing one.

  (3) why he asks me a password? I told her what to use.

  Well I toigh ok Let's use an answwer sysprep file that I've included a second cost of comments. file (withi the guest also reset SID). Well it works greate except the designation: I said in the answer file to use the variable % computername %, which is certainly the name of the master, so VDI does not change this name...

  (1) the sysprep answer file the rightway anyway?

  (2) how do I get the new name out of sight for the VM for example VM001 instead of Master001

  So let's see the unattend.xml file

  <? XML version = "1.0" encoding = "utf-8"? >

  < unattend xmlns = "urn: schemas-microsoft-com: unattend" >

  < settings pass = "oobeSystem" >

  " < component name ="Microsoft-Windows-Shell-Setup"processorArchitecture ="x 86"publicKeyToken ="31bf3856ad364e35"language ="neutral"versionScope ="nonSxS"xmlns:wcm =" http://schemas.Microsoft.com/WMIConfig/2002/State "" xmlns: xsi = " http://www.w3.org/2001/XMLSchema-instance " >

  < OOBE >

  < HideEULAPage > true < / HideEULAPage >

  Work of < NetworkLocation > < / NetworkLocation >

  < ProtectYourPC > 3 < / ProtectYourPC >

  < SkipMachineOOBE > true < / SkipMachineOOBE >

  < SkipUserOOBE > true < / SkipUserOOBE >

  < / OOBE >

  < RegisteredOwner > IT < / RegisteredOwner >

  < RegisteredOrganization > IT < / RegisteredOrganization >

  < zone > GMT + 1 < / zone >

  < / component >

  " < component name ="Microsoft-Windows-International-Core"processorArchitecture ="x 86"publicKeyToken ="31bf3856ad364e35"language ="neutral"versionScope ="nonSxS"xmlns:wcm =" http://schemas.Microsoft.com/WMIConfig/2002/State "" xmlns: xsi = " http://www.w3.org/2001/XMLSchema-instance " >

  Ways of < InputLocale > < / InputLocale >

  Ways of < SystemLocale > < / SystemLocale >

  Ways of < UILanguage > < / UILanguage >

  Ways of < UserLocale > < / UserLocale >

  < / component >

  < / Parameter >

  < settings pass = "generalize" >

  " < component name ="Microsoft-Windows-PnpSysprep"processorArchitecture ="x 86"publicKeyToken ="31bf3856ad364e35"language ="neutral"versionScope ="nonSxS"xmlns:wcm =" http://schemas.Microsoft.com/WMIConfig/2002/State "" xmlns: xsi = " http://www.w3.org/2001/XMLSchema-instance " >

  < PersistAllDeviceInstalls > true < / PersistAllDeviceInstalls >

  < / component >

  " < component name ="Microsoft-Windows-Security-SPP"processorArchitecture ="x 86"publicKeyToken ="31bf3856ad364e35"language ="neutral"versionScope ="nonSxS"xmlns:wcm =" http://schemas.Microsoft.com/WMIConfig/2002/State "" xmlns: xsi = " http://www.w3.org/2001/XMLSchema-instance " >

  < SkipRearm > 1 < / SkipRearm >

  < / component >

  < / Parameter >

  < settings pass = "specialize" >

  " < component name ="Microsoft-Windows-Shell-Setup"processorArchitecture ="x 86"publicKeyToken ="31bf3856ad364e35"language ="neutral"versionScope ="nonSxS"xmlns:wcm =" http://schemas.Microsoft.com/WMIConfig/2002/State "" xmlns: xsi = " http://www.w3.org/2001/XMLSchema-instance " >

  %ComputerName% < ComputerName > < / ComputerName >

  < ProductKey > KEY < / ProductKey >

  < CopyProfile > false < / CopyProfile >

  < / component >

  " < component name ="Microsoft-Windows-UnattendedJoin"processorArchitecture ="x 86"publicKeyToken ="31bf3856ad364e35"language ="neutral"versionScope ="nonSxS"xmlns:wcm =" http://schemas.Microsoft.com/WMIConfig/2002/State "" xmlns: xsi = " http://www.w3.org/2001/XMLSchema-instance " >

  < identification >

  < References >

  < Domain >< / domain >

  < password > USER < / password >

  < Username >USER< / username >

  < / qualifications >

  < / qualifications >

  < JoinDomain > DOMAIN < / JoinDomain >

  < UnsecureJoin > False < / UnsecureJoin >

  < / identification >

  < / component >

  < / Parameter >

  "< cpi:offlineImage cpi:source =" "catalog: c: / win7x86/extract/sources/install_windows 7 ultimate.clg" xmlns:cpi = "urn: schemas-microsoft - com:cpi" / >

  < / unattend >

  If I check the comments cust. file without sysprep answer file I see there function which can crreate names for VMS as vim.virtualmachinenamegenerator (or something like that) is it possible to use sysprep as well? Well at the end, I just want to change the SID of the virtual machines each time they recompose is to have enough unique SID in the network! How do I need to do?

  Best regards

  Duke is your main reason for the use of sysprep to work around the problem of SIDS?

  We only use VDI on site for 700 + users and clients windows 7 and Office 2010 is activated through KMS.and we use quickprep because his headache free and easy.

  I use the following to help with the problem of SIDS:

  Manually to increase the number of KMS. Think Digital the application is clean.

  Its very well explained in the link above.

• Linked Clones remain the 'customisation' stage (composer)

  Hello

  I am trying to Setup automated pools view 4.5. It is my first use of pool automated using linked clones. The work of fine manual pools. When I create the pool all seems good. The replica is created and the clones follow shortly after. They then appear in the admin view in the inventory menu / Desktop, but they have a version of the 'unknown' agent and a status of "customization." They have been at this stage, for about 45 minutes, without change.

  When I look at them in vCenter I see that they are turned on and running, but looking at the Summary tab shows that they are still using the host name of the VM parent, so I guess that the sysprep process command has not yet been executed. They picked up a DHCP ip address correctly, and VMware Tools is running. I tried to manually restart one of the clones to see if it was a blocked process, but she comes back with the same status. The guest OS is Win7. To check the vCenter customization, I deployed a VM from the same model that the parent VM and using the same saved vCenter customization and it works very well, change the host name and join the domain correctly.

  Any suggestion would be appreciated!

  TIA,

  Jules.

  What is the customization you have selected during the creation of pool (Sysprep/QuckPrep)?

  Please not that regardless of the linked clone type (syspre/quickprep) customization will try to join to the domain that you chose in the Create Pool Wizard and * NOT * to that specified in the selected custom VC specification. That is why the domain account that is set up (the server vcenter - Configuration of the server administrator display page properties) should be correct, and the DNS server to resolve this area.

  So make sure you:

  1. the parameters for each client and DNS domain connectivity

  2 Appropritae account domain and ORGANIZATIONAL unit selected in the Create Pool Wizard

  3. the added domain account has enough permissions (see the admin Guide)

  If above settings are proper, then,

  4. check that the ' connect to power on "is enabled for the virtual Parent card computer and consists of the snapshot as the network settings (return tot eh snapshot and check network settings)