Cut out pictures before importing?

Similar Questions

• Eps (CS5.5) exporter is to cut out pictures

  As you can see in the attached picture, when I export a layout as an eps, I get pieces of image that are staggered, as it has been cut and shifted in a bit. Central a continuous diagonal line. Any ideas? It occurs when the export of the same file in pdf format.

  

  Was this a file with transparency involved?

  Bob

• Nikon Coolpix L18 DSC - PTP how to view images BEFORE import

  Hello: How can I change my import settings; I want to see pictures before importing?

  I want to check mark the ones I want to download camera. Also I do not clear my photos on my camera picture; It is important not to upload hundreds of photos several times.

  Thank you

  Hello

  Download you and install the Nikon camera software and firmware (the software that is embedded in the digital camera)?

  Here are a few article that talks to connect the camera to a computer and access to pictures in it:

  How can I get pictures from my camera to my computer?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-i-get-pictures-from-my-camera-to-my-computer

   

  Erase pictures from your camera by using your computer

  http://Windows.Microsoft.com/en-us/Windows7/erase-pictures-from-your-camera-by-using-your-computer

   

  Working with digital images

  http://Windows.Microsoft.com/en-us/Windows7/working-with-digital-pictures

  You can also contact Nikon Support for assistance on the issue:

  Nikon support

  http://www.nikonusa.com/en/about-Nikon/contact-us.page

  Hope this information is useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• Video cut out of the box when importing to chronology :( What should do?

  Hello!

  My first video on my calendar and everything's fine so I.

  However when I try to import another video with the same framework, it seems that he zoomed because it cut a large part of the frame that I see even more my face . I even tried the consultation in the preview area on the top left (which seems well) until I have drag in the timeline.

  Photo 1: This is the original video

  

  Photo 2: This is the additional clip that I add that cuts out of the frame

  Something I need to specify so is, I recorded audio & video separately and them merged with the Merge option he that Premiere Pro, but that should not be a problem because I did the same thing with my first video to synchronize audio and it did not cut out of the frame.

  I'm still new to first pro and when I search for tutorials, nobody seems to have this problem. Any help?

  Thank you

  Your images, your sequence is1920x1080 is 1280 x 720, go to the settings of the sequences and change the size of 1920 x 1080.

• cut out a section in the middle of video pictures

  I have a video clip in Photos and you want to cut out a section in the middle. I can cut from each end, but do not know how to take a section in the Middle

  This is not possible with Photos - you need to like the latest version of iMovie video editing software or other

  LN

• Cut out the background, brighten the image and the image speed

  Hello world

  I'm sure it's a very simple answer, but I'm new to photoshop and have searched for a solution to this problem for a while. There seems to be so many different ways to approach it, I thought that I would ask you guys what you think and get a specific answer to my problem.

  ------------------------------------------------------------------------------

  I took a picture of my products with a good camera located on the highest image quality in a lightbox. I then want to take this picture and cut out the background (make white) and brighten the image of the products themselves. This image is then used on our posters, banners, floor stands, brochures... Made on a range of promo material and, above all, to a range of different sizes.

  I took the image in photoshop and used the tool to select around the edges, then used "curves" and another adjustment (I forget which) to make the space around the white image. Then I inverted the selection and used the same settings to make the image itself slightly brighter.

  I sent it to a printer, and they said that because I had used this process, the background I made white may not be the right shade of white printing and appear as a different shade, a box around the product on the banner (although I printed on my printer at home and I can't notice a different shade). They also said that my image was not clear enough, and he had to be 300 DPI instead of the 72 dpi that my camera took the picture. (I posted about this problem of IPR before and got useful answers, but now I'm starting the process of zero thought I would mention it again)

  I have attached the original photo and also the picture after my editing on photoshop for reference. Both in low resolution.

  So to summarize, I need to get my products on background photos, brighten them up and make them 300 dpi then don't complain printers!

  Any help would be greatly appreciated. Thanks in advance.

  Kind regards

  Jamie

  Below: Shot Original camera file format original 72 dpi is 7MB

  

  Downstairs: shot after having been edited in photoshop. Although I have no more the .psd of this file. Only the .jpeg

  

  He had to be 300 DPI instead of the 72 dpi that my camera took the picture.

  The PPI (better word than IPR) makes no sense without the physical dimensions of print to go with it.

  You mention the different print sizes. Not all should be 300 PPI. (Large banners or posters may work properly at lower pixel density)

  Can you tell us one or two sizes of output?

  And, most importantly, tell us the Pixel size of the file? (Image > Image size > width and height in pixels)

  As I said in your other post, you have rhythm. But I need to know the target print size and the size of the file in pixels.

• Cut 4 SEC before the end of songs

  When songs in streaming music to apple on songs android device to systematically cut 4 seconds before the end; According to the icon, I guess that's when the next song start the buffering. This happens when you listen to albums but also radio and is quite annoying. This does not happen on iOS or Sonos devices.

  Is this a known issue? A way to solve this problem?

  Hello Philipp Waeber,

  Thank you for using communities of Apple Support.

  If I understand your message while listening to the music of Apple on your Android device that the songs are sharp in 4 seconds before the end of the song. I know how it is important for you to be able to hear the whole song. I recommend to use the steps in the following article to resolve this problem:

  Get help with music from Apple on Android

  Best regards

• I would like to know how to create a slide show on the pictures I imported on my computer.

  I have vista and found library in my programs. I was able to import pictures from my digital camera, but can't see how to create a slide show. Please instruct me how to do this. Also, I have several clips video and panoramas. How can I include these? Thank you in advance. Shoshana

  I have vista and found library in my programs. I was able to import pictures from my digital camera, but can't see how to create a slide show. Please instruct me how to do this. Also, I have several clips video and panoramas. How can I include these? Thank you in advance. Shoshana

  =============================================
  Perhaps the following links will propose a few ideas:

  Windows Vista-
  See the photos as a slide show
  http://Windows.Microsoft.com/en-us/Windows-Vista/see-pictures-as-a-slide-show

  Windows Vista-
  Choose a theme for your slide show
  http://Windows.Microsoft.com/en-us/Windows-Vista/choose-a-theme-for-your-slide-show

  Windows Vista-
  Use pictures as a screen saver
  http://Windows.Microsoft.com/en-us/Windows-Vista/use-pictures-as-your-screen-saver

  If you want to create a slide show, you can save and share with others
  Movie Maker, ay be worth a try:

  Windows Vista-
  Demo: Create a slide show with music in Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/demo-create-a-slide-show-with-music-in-Windows-Movie-Maker

  How to easily create and edit slide shows/videos
  Windows Movie Maker (Vista)
  http://www.YouTube.com/watch?v=0Lz046qcBk4

  In regards to your panoramas... free Photo Story 3 can a pan
  side to side... just set a start and an end point. However... Photo
  History cannot import videos... just photos.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  PhotoStory 3 for Windows
  http://www.Microsoft.com/download/en/details.aspx?ID=11132
  (works on XP, Vista and?) Win7?)

  This is not a full tutorial, but should be enough to help you started...

  First be sure that the photo is less than 7200 x 7200 pixels pixels.

  Import a panoramic photo in Photo Story 3 and move on
  the screen "tell your photos and customize the animation."
  (do not remove the black borders)

  On the left, click Custom animation...

  Check the box on the screen to customize the animation...... "specify
  Start and end Position of the movement "." Resize and reposition the
  Start management Position and final Position you prefer and
  on the left, click the Preview button to see the result.

  Also you can import multiple instances of a photo and
  Pan from point A to point B in the first instance,... then point B
  point c on the second instance and so on.

  When the effects of movement are completed you can add music if
  you want and go to the screen "Save Your Story."

  You can left click on the 'Settings' button for several choices of
  resolution... the profile of 1024 x 768 is perhaps a good choice.

  Also... Choose a backup location and a name for your video.

  To save the project as a. WMV video file... click Next
  last time.

  Then you can import that video as well as other photos and
  video clips in DVD Maker to create your DVD. If you have
  problems with the video clips you may need to convert to MP4
  paste them into WMV format before importing in creation of DVD.

  More info...

  Create a story from a single
  Another Photo with Photo Story 3

  http://Windows.Microsoft.com/en-us/Windows-XP/help/digitalphotography/create-story-from-still-photo

• How to use cut and paste to import photos

  How can I use cut and paste to import pictures from a SD card on Windows 7?  Windows 7 has no AutoPlay.

  It works in the same way as for any file:

  1. Use Windows Explorer to open the folder on the SD card where your photos reside.
  2. Mark the pictures you want to copy.
  3. Press Ctrl + X to cut (or right click / cut)
  4. Use Windows Explorer to open the folder on the hard drive where you keep your photos.
  5. Press Ctrl + V to paste (or right click / Paste)

• How to cut a picture on an image and then give him the normal air?

  I'm new to paintshop. I have a picture that I cut out a person, and I can do it, but after I cut the image how the image new normal appearance... For example in this picture I can cut one of the tennis people, but how do I put the net return ect...

  original image.

  cut the photo.

  The effect I'm looking for, it's that there are 2 tennis players playing a person on the other side. How do I add a layer or all I have to do to make it look real... Don't know how to fix the net. I can make the color of the ground and maybe add the white lines. I cut out person very fast just to show them. I would have taken some time to cut the person better, but it's just a picture of example for anyone.  Thanks for any info. I had a stroke a few years ago so my words are not great a few times. Thanks again for your time.

  Rather than simply cut the person, make a selection of the person and use Content Aware Fill (SHIFT - F5) to remove the person. Photoshop will do a good job of filling in the selection

  

  

• Time-out occurred before the event waited for SequenceRunner simple

  I'm unable to these tests. I always get Timeout occurred for my sequence in the testOnLogout test.

  Any ideas?

  Time-out occurred before eventTimeout expected occurred before the EXPECTED event
  Error: Timeout occurred before the EXPECTED event
  at org.flexunit.internals.runners.statements::ExpectAsync/handleAsyncTimeOut() [E:\hudson\job s\FlexUnit4-Flex4.1\workspace\FlexUnit4\src\org\flexunit\internals\runners\statements\Expe ctAsync.as:319]
  at flash.events::EventDispatcher/dispatchEventFunction()
  at flash.events::EventDispatcher/dispatchEvent()
  at org.flexunit.async::AsyncHandler/handleTimeout() [E:\hudson\jobs\FlexUnit4-Flex4.1\workspa ce\FlexUnit4\src\org\flexunit\async\AsyncHandler.as:169]
  at flash.events::EventDispatcher/dispatchEventFunction()
  at flash.events::EventDispatcher/dispatchEvent()

  package tests.view
  {
  
  Import flexunit.framework.Assert;
  
  Import mx.events.FlexEvent;

  
  Import org.flexunit.async.Async;
  Import org.fluint.sequence.SequenceRunner;
  Import org.fluint.sequence.SequenceSetter;
  Import org.fluint.sequence.SequenceWaiter;
  Import org.fluint.uiImpersonation.UIImpersonator;
  
  view of the import. LoginForm;
  
  public class TestLoginForm
  {
  
  private var view: LoginForm;

  [Before (async, ui)]
  public void setUp(): void
  {
  view = new LoginForm;
  Async.proceedOnEvent (this, opinion, FlexEvent.CREATION_COMPLETE, 600);
  UIImpersonator.addChild (view);
  }
  
  [After (async, ui)]
  public function teardown (): void
  {
  UIImpersonator.removeChild (view);
  view = null;
  }

  
  [Test (async, ui)]
  public function testOnLogout (): void {}
  var passThroughData:Object = new Object();
  
  passThroughData.username = "test";
  passThroughData.password = "test";
  passThroughData.selectedIndex = 0;

  var sequence: SequenceRunner = new SequenceRunner (this);
  sequence.addStep (new SequenceSetter (view.username, {text:passThroughData.username}));}))
  sequence.addStep (new SequenceWaiter (view.username, FlexEvent.VALUE_COMMIT, 400));
  
  sequence.addStep (new SequenceSetter (view.password, {text:passThroughData.password}));}))
  sequence.addStep (new SequenceWaiter (view.password, FlexEvent.VALUE_COMMIT, 400));
  sequence.addStep (new SequenceSetter (view.domain, {selectedIndex:passThroughData.selectedIndex}));}))
  sequence.addStep (new SequenceWaiter (view.domain, FlexEvent.VALUE_COMMIT, 400));
  
  view.onLogout ();
  
  sequence.addStep (new SequenceWaiter (view.username, FlexEvent.VALUE_COMMIT, 400));
  sequence.addStep (new SequenceWaiter (view.password, FlexEvent.VALUE_COMMIT, 400));
  sequence.addStep (new SequenceWaiter (view.domain, FlexEvent.VALUE_COMMIT, 400));
  
  sequence.addAssertHandler (handleOnLogout, passThroughData);
  
  Sequence.Run ();
  }

  
  protected function handleOnLogout (passThroughData:Object): void {}
  Assert.assertEquals)
  View.UserName.Text, passThroughData.UserName,
  View.Password.Text, passThroughData.Password,
  (view.domain.selectedIndex, passThroughData.selectedIndex);
  }
  
  }
  }

  So I take a guess here that you want is the call of onLogout() occur as part of the sequence. But it's not what your code. Sequences are defined, then run when you call the run() method.

  Here you call the method onLogout in the middle of set the sequence... then some time later (probably after the disconnection is made) your sequence starts waiting for things happen... and to expire because nothing happens.

  I think that what you want here is to use the SequenceCaller class to actually perform the onLogout as part of the sequence.

  Mike

• How to make Cut-Out with Clipping Path?

  Hello, help please?

  I need to provide a photo of an object that has been described as a 'Cut Out' and a Clipping Path must be included. Now I know this is not a rare condition, but I've never been asked before.  I tried to fill out the application, but unfortunately I was unsuccessful so far.

  OK... so with CS5. I cut the object using the feather (background selected then removed). I saved the way like a 'selection '. But what I ache to understand is this.

  The need is a jpeg file. And I know that if I flatten the file, then save in jpeg format, I'll lose the bottom of transparency and the article will be on white background. So if I send this file how the recipient find the clipping path - which I presume is the path that I saved in the paths tab?  Because when I flattened, I won't lose channels or paths. The captain that they will be an object of the required dimensions, they claimed, but it will be on a white background, therefore, he will not be able to simply 'fit' as a single item in any work they need to.

  Other elements were provided by other people and their file is a jpeg file, and he says he understands a clipping path.  So, I understand that this is possible, but I just can't get out!

  Sometimes I feel so dumb!

  Any help will be much appreciated

  Thanks in advance

  Mark

  I don't think that you can incorporate a clipping path into a jpg file, but you can send a png image

  with transparency based on web or low range of printing. (not recommended).

  The usual method is .psd or .tiff with transparency or the clipping integrated.

• On my iMac OSX El Capitan v 10.11.3 when editing of photos and work between them the screen takes over and moves the picture on the next picture before Ive had the chance to edit, I then fold the photo required to try again. This can hap

  On my iMac OSX El Capitan v 10.11.3 when editing of photos and work between them the screen takes over and moves the picture on the next picture before Ive had the chance to edit, I then fold the photo required to try again. This can happen several times and its so frustrating.

  Similar thing TI also occurs when you are working on other programs on the mac, but not nearly as much.

  Guessing here, but try to disable drag between pages on the tab more than movements in the system preferences > mouse. or a Trackpad. Depending on whether you are using.

• Same pictures were imported on my iMac but have different information in iPhoto

  I have pictures I imported on my iMac and I read from each photo info panel in iPhoto.  I have the same picture taken to precisely at the same time, but it is just labelled iPad air 2 and another labeled iPad air 2 then under iPad 2 camera back to air. Could this have appeared that I did an album on my iPad to roll photo stream or camera & it has imported twice? Or is this new labelling in iPhoto and maybe they have been imported into different versions of iPhoto? The second photo is smaller i.e. KB, not MB.  I tried to work on everything first, how I had reached almost cela double upward and secondly that one to remove.  Guess I should remove the smaller version for lack of quality. REA

  They are different pictures, really different files. We know because:

  The second photo is smaller i.e. KB, not MB.

  So, Yes, delete the smaller file.

  As to how you get both, I would ask the Forum iPad

• Since the installation of El Capitan, my streaming to my Audioengine DAC D2 cut after 12 minutes (the default duration of sleep). It will restart by pressing the space bar. When I change the duration of sleep, the cut outs are becoming more frequent and i

  Since the installation of El Capitan, my streaming to my Audioengine DAC D2 cut after 12 minutes (the default duration of sleep). It will restart by pressing the space bar. When I change the duration of sleep, the cut outs are becoming more frequent and intermittent. Help?

  I checked the wifi and changed frequency (new modem, frequency change made no difference). The Board battery seems fine - all updates well. My computer is an iMac (2011), 3.1 GHz Intel Core i5, 8 GB 1333 MHz DDR3, with a new AMD Radeon graphics card. I recently installed a State strong 1 TB SATA drive and fitted with a LaCie Porsche 4 to USB for backup and a 4TB disk storage RAID LaCie drive.

  I'm frustrated, having to come in my computer since my living room every 12 minutes to continue to listen to Spotify on my stereo system.

  My guess is there a bug in the software of sleep in El Capitan, which disrupts his (I've tried different USB ports connect the Audioengine sender and same thing).

  Should I go back to Yosemite?

  Turiteaguy

  First of all, 10.11.3 OSX just came out. Try this.