Time-out occurred before the event waited for SequenceRunner simple

Similar Questions

• Automated Webinar reminders an hour before the event

  Hello

  We do not use the typical WebEx or Adobe Acrobat Connect Pro for our Webinars so I need some suggestions on the establishment of an automated reminder email out an hour before the event. I tried several ways to set up in rural areas, but I'm stumped. The requirements and conditions that I have are:

  • The time change event and there is no reason to set
  • Guests can attend more than once these events and can be filed for several events at the same time
  • We can use custom Contact fields to accommodate data and imported it via CSV, or the same information is available in the maps of data/object custom
  • Registration information is not submitted by Eloqua, it is entered into our system and sync'd with Eloqua
  • We would like to do this so it is set and forget

  The challenge I have is that I am not being able to constantly evaluate the same people within Eloqua and time of the communication. Do I need to use programs for this? We have no experience with programs yet so if there is the guide who can guide me through this it would be great, thanks!

  Gary

  The best way to proceed would be in the program generator, you can configure a feeder that evaluated permanently and allow members to reinstate the program several times. I don't think there is a guide that would walk you by it, but your basic program flow would look like this:

  Step 1) no passthrough-action stage, with a charger. Your criteria for fattening would be like "Contacts where the value 'Webinar time field' is in the next 2 hours. This feeder constantly evaluates.

  Step 2) waiting stage for 30 minutes, in order to take account of the delays in the program generator, so that you get as close as 1 hour before the event possible.

  Step 3) send your message using the package step send.

  You can then make any desired treatment, or remove contacts from the program right here.

  You can do more complicated if you want, but using field blends in the email to fill out all the info of the webinar, it's pretty "set it and forget it".

  He is also a very good documentation on available on central client program generator, and I think that here on Topliners as well under the button at the top right, the Product Documentation by searching.

• What is the cause of the message "Waiting for Service ' Console CVD activity

  I have two related questions.

  basis, I just started centralizing 200 computers ish, all except 2 appears fine, 2 questions, one below and another with VSS errors.  This message is just for the question "in waiting for the Service.

  1. What is the cause of the message "Waiting for Service ' Console CVD activity and is there anywhere that documents these meanings of status.
  2. No idea where I should start troubleshooting the message "Waiting for Service ' I get to the computer below.

  I have a computer with this status which comes to have installed the client and will not be to centralize.  Other computers seem to work properly (centralized).

  The computer is to ping requests, but appears as disconnected in the console.

  I deleted the CVD and restarted the centralization CVD using a different policy on a different volume without change.

  Journal of the history of CVD below

  Description of the Type of weather

  31/01/2014-08:52:32 AUDIT_EVENT assign device, device: PC30866 (1995), cardiovascular disease: 11614, political CVD: don't Default - every 4hrs - no drive D (1.1)

  02/05/2014-13:53:58 politics AUDIT_EVENT assign CVD, CVD: PC30866 (11614), CVD policy: Migration Post-quotidien (1.0)

  31/01/2014 General Office EVENT 20:44:46 service error

  31/01/2014 General Office service EVENT 17:39:04 error

  31/01/2014 14:44:34 EVENT has not finished downloading, internal error, exception attached

  31/01/2014 General error from the EVENT 13:05:15 service office

  31/01/2014-12:30:37 TRANSACTION_START PC30866 - centralize endpoint

  the transaction log has an inscription mentioning a failure (not sure if it is the server or PC related) disc.

  Diseases cardiovascular diseases cardiovascular name Type State layer size (MB) data transferred (MB) branch reflector savings start time end time transfer (MB)

  Of the endpoint PC30866 centralize 11614 reading disc failed 169648 1531 0 31/01/2014 12:30:37 05 d 04:16:52

  The next event is in the application event log and the Mirage event log for the failed computer. (there were not all other errors in the paper since the deployment of mirage customer and there is no errors in the system event log)

  Event type: error
  Event source: VMware Horizon Mirage customer
  Event category: no
  Event ID: 0
  Date: 31/01/2014
  Time: 20:44:46
  User: n/a
  Computer: PC30866
  Description:
  Error general service office
  Unexpected exception taken (sender Name:Wanova.Desktop.Service.exe
  There is no policy context.
  , the object exception System.OutOfMemoryException: Exception of type 'System.OutOfMemoryException' was thrown.
  System.Collections.Generic.List to ' 1.set_Capacity (Int32 value)
  System.Collections.Generic.List to ' 1.EnsureCapacity (Int32 min)
  to System.Collections.Generic.List' 1. Add (T item)
  at Wanova.Net.DataTransfer.TransferStreams.SignatureResponseStream.ProcessChunk (ChunkInfo chunkInfo)
  at Wanova.Net.DataTransfer.TransferStreams.ChunkInfoDecodingStream.BeginWrite (Byte [] buffer, TransferStreamWriteCallback onWriteComplete)
  at Wanova.Net.DataTransfer.DataHandler.ExecuteDataStreamTask (DataHandlerExecutionTask task, MarkCompletionCallback markCompletionCallback)
  at Wanova.Net.DataTransfer.DataHandler.ExecuteTask (IExecutionTask task, MarkCompletionCallback markCompletionCallback)
  Wanova.Net.DataTransfer.ExecutionController.QueueListener (Group IExecutionTask)
  to Wanova.Common.ThreadUtils.ParamaterizedWorkItem'1.Run (object fakeParam)
  at System.Threading.QueueUserWorkItemCallback.WaitCallback_Context (Object state)
  at System.Threading.ExecutionContext.Run (ExecutionContext executionContext, ContextCallback callback, Object state, Boolean ignoreSyncCtx)
  at System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem)
  at System.Threading.ThreadPoolWorkQueue.Dispatch)
  at System.Threading._ThreadPoolWaitCallback.PerformWaitCallback (), ends at True)

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  It turns out that this computer seems to have hard drive errors, so not a matter of mirage.

• I have an iPod hooked up to a Pioneer AVH-X4700BS 160, and nine times out of ten the iPod reads OK TO DISCONNECT.

  I have an iPod hooked up to a Pioneer AVH-X4700BS 160, and nine times out of ten the iPod reads OK TO DISCONNECT.

  It seems normal. What happen?

• User profile service, you have been logged with the default for the system profile, please see the the event log for more information or contact your administrator.

  User profile service... Help... I'm stuck and going nowhere.

  Hello

  Whenever my user try to connect this MSG poping up to the top of any solution please.

  User profile service

  you have been logged on with the default for the system profile, please see the the event log for more information or contact your administrator.

  Click on this URL and follow the instructions 100% your problem has been resolved http: //support.microsoft.com/kb/947215

  Try it.

• Cannot start Windows Virtual PC host process. Check the log of the events system for more details

  Hello

  I am running Win 7 Home Premium 64 and seek to install Windows XP Mode Virtual PC.

  I followed the instructions at: http://www.microsoft.com/windows/virtual-pc/download.aspx and receive the following:

  "Windows Virtual PC. Cannot start Windows Virtual PC host process. Check the log of the events system for more details".

  He does not point me to the "system event log", but he leaves me here. Any advice?

  Thank you

  Hello

  Ideally, this error message indicates that your processor does not support the against hepatitis a (hardware support for virtualization)function.

  Cause:

  Windows Virtual PC and Windows XP Mode are supported only on computers whose CPUs are the HAV feature is enabled. Therefore, if your processor does not support the functionality of HAV or if this feature is disabled, you cannot start the virtual machines in Windows Virtual PC.

  To resolve this problem, follow the steps mentioned in the link below

  Error message about Virtualization-aided material for Windows XP Mode in Windows Virtual PC on a computer that is running Windows 7

  http://support.Microsoft.com/kb/977206

• Windows could not connect to the System Event Notification service. As an administrator, you can view the log of the events system for more details

  Original title:

  Office blocked in the classic theme.

  This morning when I started my computer, I noticed that it displays the following error message:

  "Windows cannot connect to the System Event Notification Service service. This problem prevents limited users to logon to the system. As long as administrator, you can review the system the event log for more details on the reasons, the service has not responded. »

  I went through the event log and found three errors:

  Name of the error: Service Control Manager
  Event ID: 7022

  "The Windows Audio service hung on starting."

  Name of the error: Application Popup

  Event ID: 875

  "Pilot atksgt.sys has been blocked by a load."

  Name of the error: Service Control Manager

  Event ID: 7000

  "Atksgt service failed to start due to the following error:
  This driver has been blocked by a load.

  There is no new hardware or installed software, virus/malware analyses provided no results. The only effect I can see is that the office is stuck in classic mode and options for the Aero themes are disabled.

  Any help is appreciated.

  I would like to use system restore to set up Windows in a few days.

• Exception occurred during the event dispatching: java.lang.NoSuchMethodError

  Hello
  
  We have upgraded to the latest Oracle Application Server version 10.1.2.3.0 and webutil version 1.0.6.
  
  But we are facing the following error while accessing the web link. Message captured from the Java Console.
  Please suggest if you have a solution/idea about this error. Thank you!
  
  Oracle JInitiator: Version 1.3.1.22
  Using JRE version 1.3.1.22- internal Java hotspot Client VM
  Maximum size: 50 MB
  Compression level: 0 -.
  c: clear console window
  f: finalize objects on the finalization queue
  g: garbage collection
  h: display this help message
  l: dump classloader list
  m: print memory usage
  q: Hide console
  S: dump system properties
  t: dump thread list
  x: delete the cache of class loaders
  0-5: set the level of trace to < n >
  ----------------------------------------------------
  Download http://si02938.in.irt.com:7778/forms/java/frmall_jinit.jar to JAR cacheDownloading http://si02938.in.irt.com:7778/forms/java/frmwebutil.jar to JAR cacheDownloading http://si02938.in.irt.com:7778/forms/java/jacob.jar to JAR cacheDownloading http://si02938.in.irt.com:7778/forms/java/FileInformation.jar to JAR cacheDownloading cacheproxyHost = nullproxyPort = 0connectMode = HTTP, native.
  Version forms cmdlet is: 10.1.2.3
  Exception occurred during the event dispatching: java.lang.NoSuchMethodError at oracle.forms.webutil.common.VBeanCommon.init(VBeanCommon.java:281) at oracle.forms.handler.UICommon.instantiate (Unknown Source) at oracle.forms.handler.UICommon.onCreate (Unknown Source) at oracle.forms.handler.JavaContainer.onCreate (Unknown Source) at oracle.forms.engine.Runform.onCreateHandler (Unknown Source) at oracle.forms.engine.Runform.processMessage(Unknown Source) at oracle.forms.engine.Runform.processSet(Unknown Source) at oracle.forms.engine.Runform.onMessageReal(Unknown Source) at oracle.forms.engine.Runform.onMessage(Unknown Source) at oracle.forms.engine.Runform.processEventEnd(Unknown Source) at oracle.ewt.lwAWT.LWComponent.redispatchEvent(Unknown Source) at oracle.ewt.lwAWT.LWComponent.processEvent(Unknown Source) at java.awt.Component.dispatchEventImpl (unknown Source) at java.awt.Container.dispatchEventImpl (unknown Source) at java.awt.Component.dispatchEvent (unknown Source) at the java.awt.EventQueue.dispatchEvent (Unknown Source) at java.awt.EventDispatchThread.pumpOneEventForHierarchy (unknown Source) at the java.awt.EventDispatchThread.pumpEventsForHierarchy (Unknown Source) at java.awt.EventDispatchThread.pumpEvents (unknown Source) at java.awt.EventDispatchThread.run (Unknown Source)
  
  Published by: user12233243 on November 16, 2009 22:28
  
  Published by: user12233243 on November 16, 2009 22:29

  Hello

  Your welcome, but you need to mark it as correct or relatively useful because other users will be able to solve their problems.

  Sarah

• get the structure of the event inside the while loop to wait for event occurs before the execution

  Hello

  I have a small problem, when I raise an event using a value change button, which works very well.  The problem is that the VI does not wait for me raise an event and instead runs the same event again, even if I have not pressed the button to start again.  The mechanical action of the button switch is released is.

  I was wondering how you get the structure of the event to wait for a user event, after that he executed the first time.

  James.Morris wrote:

  There is no reason that the event should be raised twice as much that the only way that it fires in your code is by the user by clicking on 'Hall measure only'.

  Oh yes, there is, and I deserve a kudo for this one.  Mechanical action on the button is set on the switch until published, so click to generate an event, on the bottom and on the square, attached is an example.

  My boy has my students hate this question, and to be honest, I hated it.  When never would you do that intentionally?  Honestly?  Anyway to change the button back to normal (as default latch when released) and move the terminal button in the structure of the event where it is managed and it will work as usual.

• smart camera of the trigger of the time-out value of the error - VBAI 3.6

  Hello that tal?, el tema are that I have a problem with the Smart camera're tengo una fotocelula conectada has the patilla of trigger and (2), el u Trigger-(12) masa in las patillas del conector DB15 of the smart camera para as cuando PASE una pieza realice the fotografia. The cuestion are el solo time-out error me already poner 60000 ms, y for example, so una pieza soon en pasar 60000 ms en el paso of the closing of imagen mas me pone time-out error, y sigue por el diagrama of blocking como if would Fall the imagen. In principio imported me that salga el time-out error, pero me gustaria that esperase has the following pieza sin avanzar por el diagrama of blocking, not so to me explico very well.

  If alguien tiene alguna idea como el problama delivery could be lo agradeceria mucho.

  Cordially, is muchas gracias of photos. David.

  Hey David,

  entonces Perfecto. If the respond you vale marcala como tal in el foro o con UN kudo en knew defecto para as other users themselves can the answer is beneficiar.

  Duro con ello!

  Jesus.

• How to freeze the application waits for a response from anti-pop

  Well I was developed a custom pop filter and I want to know how to stop my request until the anti-pop filter return a response something like Dialog.Ask () anyone have an idea how I can start to do, thank you for your time.

  Ivan

  After some time to read the documentation, I find the solution instead of pushScreen() user to user pushModalScreen(). This method does not return until you call popScreen (Screen). You must call this method on the event thread thank you for your time.

• The event handlers for multiple displays involving data SUBMIT and GET

  Hello

  We have a requirement as below:

  Note: cannot share the details accurate screen customer etc. because of the limitations of data security

  For example

  (1) 1 screen.

  Please enter the employee ID you want to recover data for

  (2) 2nd screen-

  Now, based on input that the user gives on the first screen that EMP_ID, we want to retrieve the details of a DB(not to worry as the DB connection part is taken care of) Native and display on-screen in the respective attributes.

  After that the user sees the correct details on the 2nd screen, they can go ahead and edit the details and which must be submitted to the DB.

  Queries:

  (1) we tried to use different managers and - OnSessionCreatedEventHandler, OnSubmitDataEventHandler - but what happens is the OnSessionCreatedEventHandler not get entry into the 1st screen, because it (i.e. OnSessionCreatedEventHandler) is triggered immediately after the loading of the 1st screen.

  The handleEvent() for the OnSessionCreatedEventHandler method has a piece of hibernate code base that requires the EMP_ID as input to run the query. So when the 1st screen itself is loaded, the event handler fails to get the emp_id entered by the user, because it is not yet approved in the session, finally throw an exception to put into hibernation.

  (2) is it possible, we could use an EventHandler or combination of these, to capture the data entered on the 1st screen and commit in the session, so that the 2nd screen can take this value from the session and then extract the DB.

  Any help would be much appreciated.

  The real scenario involves a lot of complex business rules and hibernate activity as well, but now those who have been supported.

  Hello

  You can implement an OnBeforeSubmitData handler that does something like the following:

  Look in the data presented for the user name attribute and if necessary

  Call your Hibernate utility to search for additional data

  Add additional data to the data sent

  During your 1st screen send the related data will be submitted with it.

  An alternative would be to have the user enter their Id in a Java screen, maybe a kind of servlet filter to make a pseudo login and then add user for query parameters identification and redirect to the URL standard OWD. You can write a plugin Manager OnRequest to retrieve the id of the user, looking for seeds and additional data before the session thanks to this data.

  Maybe there are also other possibilities, and it would be a shame not to use the OPA to manage maintenance and business rules.

  Concerning

  Ian

• Error time-out connection at the launch of the jdev (p9879989_R12_GENERIC) R12.1.3

  Hi all

  When I try to run a tutorial PAGE or entire application PG, my jdev not starts the application in IE (or any browser itself). Please view the below error stack trace and let me know what to do.

  =========

  [Departure OC4J uses the following ports: HTTP = 8988, RMI = 23891, JMS = 9227]

  C:\jdevhome\jdev\system\oracle. J2EE.10.1.3.41.57\embedded-oc4j\config >

  C:\jdevbin\jdk\bin\javaw.exe-hotspot - classpath C:\jdevbin\j2ee\home\oc4j.jar; C:\jdevbin\jdev\lib\jdev-OC4J-embedded.jar-DFND_JDBC_STMT_CACHE_SIZE = 200 - DCACHENODBINIT = true - DRUN_FROM_JDEV = true - mx256m - XX: MaxPermSize = 256M - Xverify: none - DcheckForUpdates = adminClientOnly - Doracle.application.environment = development - Doracle.j2ee.dont.use.memory.archive = true - Doracle.j2ee.http.socket.timeout = 500 - Doc4j.jms.usePersistenceLockFiles = false oracle.oc4j.loader.boot.BootStrap - config C:\jdevhome\jdev\system\oracle.j2ee.10.1.3.41.57\embedded-oc4j\config\server.xml

  [waiting for the server to complete its initialization...]

  Journal of com.evermind.server.jms.JMSMessages may 3, 2014 20:30:50

  INFO: JMSServer []: Server OC4J JMS recovery of transactions (commit 0) (0 rollback) (prepared 0).

  Journal of com.evermind.server.jms.JMSMessages may 3, 2014 20:30:50

  INFO: JMSServer []: Server OC4J JMS recovering local transactions queue [jms/Oc4jJmsExceptionQueue].

  WARNING: C:\jdevbin\jdev\appslibrt\xml.jar source Code (< draws > in C:/jdevhome/jdev/system/oracle.j2ee.10.1.3.41.57/embedded-oc4j/config/application.xml) has the same filename, but is not identical to the /C:/jdevbin/lib/xml.jar (< source code > (ignore obvious Class-Path) in META-INF/boot.xml to C:\jdevbin\j2ee\home\oc4j.jar). If it contains different versions of the same classes, it will be hidden because it is already visible in the search path for the default.root:0.0.0 charger.

  WARNING: C:\jdevbin\jdev\appslibrt\jazn.jar source Code (< draws > in C:/jdevhome/jdev/system/oracle.j2ee.10.1.3.41.57/embedded-oc4j/config/application.xml) has the same filename, but is not identical to the /C:/jdevbin/j2ee/home/jazn.jar (< source code > in META-INF/boot.xml to C:\jdevbin\j2ee\home\oc4j.jar). If it contains different versions of the same classes, it will be hidden because it is already visible in the search path for the default.root:0.0.0 charger.

  WARNING: Source-Code C:\jdevbin\jdev\appslibrt\jazncore.jar (from manifesto of C:/jdevbin/jdev/appslibrt/jazn.jar) has the same filename, but is not identical to the /C:/jdevbin/j2ee/home/jazncore.jar (< source code > in META-INF/boot.xml to C:\jdevbin\j2ee\home\oc4j.jar). If it contains different versions of the same classes, it will be hidden because it is already visible in the search path for the default.root:0.0.0 charger.

  WARNING: Source-Code C:\jdevhome\jdev\system\oracle.j2ee.10.1.3.41.57\embedded-oc4j\applications\datatags\webapp\WEB-INF\lib\uix2.jar (from WEB-INF/lib/directory in C:\jdevhome\jdev\system\oracle.j2ee.10.1.3.41.57\embedded-oc4j\applications\datatags\webapp\WEB-INF\lib) has the same filename, but is not identical to /C:/jdevbin/jdev/appslibrt/uix2.jar (< draws > in C:/jdevhome/jdev/system/oracle.j2ee.10.1.3.41.57/embedded-oc4j/config/application.xml). If it contains different versions of the same classes, it will be hidden because it is already visible in the search path for the datatags.web.webapp:0.0.0 charger.

  14/05/03 20:31:13 java.net.ConnectException: Connection timed out: connect

  14/05/03 20:31:13 at java.net.PlainSocketImpl.socketConnect (Native Method)

  14/05/03 20:31:13 at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)

  14/05/03 20:31:13 at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)

  14/05/03 20:31:13 at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)

  14/05/03 20:31:13-java.net.SocksSocketImpl.connect(SocksSocketImpl.java:364)

  14/05/03 20:31:13-java.net.Socket.connect(Socket.java:507)

  14/05/03 20:31:13-java.net.Socket.connect(Socket.java:457)

  14/05/03 20:31:13 at java.net.Socket. < init > (Socket.java:365)

  14/05/03 20:31:13 at java.net.Socket. < init > (Socket.java:207)

  14/05/03 20:31:13-oracle.jdevimpl.runner.oc4j.Oc4jNotifier.sendMessage(Oc4jNotifier.java:98)

  14/05/03 20:31:13-oracle.jdevimpl.runner.oc4j.Oc4jNotifier.postInitApplicationServer(Oc4jNotifier.java:55)

  14/05/03 20:31:13-com.evermind.server.ApplicationServer.serverExtensionPostInit(ApplicationServer.java:1202)

  14/05/03 20:31:13-com.evermind.server.ApplicationServer.setConfig(ApplicationServer.java:1049)

  14/05/03 20:31:13-com.evermind.server.ApplicationServerLauncher.run(ApplicationServerLauncher.java:131)

  14/05/03 20:31:13 at java.lang.Thread.run(Thread.java:595)

  14/05/03 20:31:13 containers for J2EE 10 g (10.1.3.3.0) initialized Oracle

  =========

  His critics and pls help me with your thoughts. Thank you

  Concerning

  $oorya

  java.net.ConnectException: Connection timed out: connect

• Why read the session waits for the command of logfile (checkpoint incomplete)?

  Hello
  
  I session which States only, or better to say, I think he reads alone (I think the waiting list of events). There is full expectation of events for this session. I do not understand why this session expected to wait to log file switch (checkpoint incomplete) event. Can someone explain it to me?
  

  {noformat}
  EVENT                                  TIME_WAITED
  db file sequential read                    441014
  db file scattered read                     261929
  SQL*Net message from client                194635
  log file switch (checkpoint incomplete)    173310
  SQL*Net more data to client                 58938
  log file switch completion                 17146
  direct path read                             2267
  log buffer space                              373
  SQL*Net message to client                     311
  log file sync                                   114
  events in waitclass Other                      46
  latch: shared pool                             21
  SQL*Net more data from client                  20
  SQL*Net break/reset to client                   6
  buffer busy waits                               0
  undo segment extension                          0
  latch: cache buffers chains                     0
  {noformat}

  Thank you
  
  Jakub.

  Blocks of database entries are by DBWR, not dedicated server process: so if a session database issues some write actions that they cannot be declared with corresponding wait events in the user database session, but you will see waiting for associated events to make journal entries because database session must either wait to VALIDATE the execution returns (redo written log is made by LGWR and not by dedicated server process) or the order of log file (also made by LGWR).

  You can see sort in http://download.oracle.com/docs/cd/E11882_01/server.112/e16508/process.htm#BABHJDHD
  and in the complete picture and great http://landingpad.oracle.com/webapps/dialogue/ns/dlgwelcome.jsp?p_ext=Y&p_dlg_id=9575302&src=7027600&Act=54.

  Edited by: P. Forstmann on 19 Jan. 2011 17:36

• Time out function on the timeline...

  Hi all!

  can someone help me with script for a time-out on my calendar feature?

  I have some tasks in my scenario where I want a timeout to happen after 5 seconds the user click anywhere or do anything.

  I am familiar with mouse functions listener... but they only use them for something that I would do the time-out after a predetermined time already...

  Thanks for any help.

  Pat

  imports must be placed at the top of your codes. Sorry also forgot to tell you that you must activate the timer by calling the setUserActivityTimeout function whenever you intend to start checking for the activity of the user. Then, each mouse click resets the timer. If no more clicks are detected after the last click (in 5 sec), it calls onUserInactivity, which will remove the _root.onMouseDown Manager so that the timer is not recalled when clicked. But you can re - activate the timer by setting his manager with setUserActivityTimeout.

  Import mx.utils. Delegate; Should be at the top of the code

  var nTimeoutId:Number;

  var nTimeTolerance:Number = 5000; timeout of 5 seconds

  _root. OnMouseDown = Delegate.create (this, setUserActivityTimeout);

  setUserActivityTimeout ( ); Activate the timer

  function setUserActivityTimeout(): Void

  {

  clearTimeout() (nTimeoutId);

  nTimeoutId = setTimeout (delegate.create (this, onUserInactivity), nTimeTolerance);

  }

  function stopTimer(): Void

  {

  clearTimeout() (nTimeoutId);

  }

  function onUserInactivity(): Void

  {

  Delete, and then redefine it again if you want to activate again

  delete _root.onMouseDown;

  gotoAndStop ("exit_no");

  }