Cut stacked titles

Similar Questions

• Impossible to apply the Animation of the title

  First Elements 8 don't apply animation title to a certain title.

  The same track contains a few other titles, to which I was able to apply the animation of the title without problem.

  I tried dragging the problematic title (in fact, problematic titles) to a separate track, but this does not solve the problem.

  Is there a solution/workaround?

  Is this a known issue?

  Where the problem comes not from?

  Two thoughts:

  (1.) you try to add a fade-in and an Animation of bland-out title to a title? If so, use Ctrl-K to cut your title into two pieces in the middle right. Add your choice of fade-in for the first, then your bland-out per second.

  2.) you have more than one line of text? Title Animations would apply ONLY to the line above. The way around this is to make a separate title for each line and place them above the other on different video tracks. Jose a limitation of entertainment title.

  Good luck

  Hunt

• Recovery & razor tool

  Adobe Premiere Pro 2015.3 cc 20 July 2016

  Today, I started first in the hope of quickly change a video for my little YouTube channel, when I came across a very frustrating and annoying problem. When I tried to use the razor tool to cut the title overlay on top of my video, it would not automatically end up at the edge of the video. I don't know if I changed some settings by accident or what. But any help would be appreciated. When I tried to superimpose a title on the video, he would meet with the edge of the video below. It's really frustrating because it means I have to zoom in to get the accurate meeting of the 2 right, and there's just too much time. Again, any help is appreciated.

  Thank you.

  Probably, you hit the S key by mistake - this is the shortcut to activate the hanging on and outside.  You can also use the magnet icon in the header of the timeline panel, just below the timecode display.

• How can I get fonts (TypeKit or other) to show Test film/browser?

  I work in 2015.2 on OS X 10.11.5 Animate.  I create a simple slide show with the canvas and the test of the Control Test Movie/In browser (Safari) film.

  Each slide has a title separate, created with TypeKit Web fonts I have installed on my machine.  The slides and titles all look great and well acted in Animate.  However, when I order Test Movie/In browser (Safari) that the slides view in the browser.  Titles do not appear.  How can I get the titles to show also the browser testing?

  When I did earlier with the same movie and police tests to run on another machine, I had no problem are to be displayed in the browser to Test Movie/In.  In fact, I'm just back to the old machine and it always shows the police in the Test Movie/In browser.  But the new machine with the same film and the police appear not all fonts in the browser to Test Movie/In.

  I even tried to use some system fonts instead of the fonts TypeKit and always the police will not display in the browser to Test Movie/In.  Also, when I bring the film Dreamweaver police also will not - display that slides.

  Any suggestions how to get fonts to display in the browser to Test Movie/In?

  I found the solution.  Just after the writing of the note above I realized that I had reduced the size of the stage - so cut the titles at the bottom of the scene.  Thus, it seems that it was a simple oversight.

  Thank you.

• Motion - Final Cut title - related text alignment

  I created a title Final Cut in Motion 5.

  Then I copied the text to a different layer and created an animation.

  The text of the first, is published, so I can customize later for Final Cut Pro X.

  So the second text corresponds to the text of the edited user, I've added a link to the text using the source: Object.Text, Object.Text destination.

  When I use it in Final Cut, the text is changed and I can even looking fonts, size etc.

  The problem is, that the second text alignment is left, I even specified that it is centered.

  How can solve this problem?

  I can link somehow the alignment of another text?

  Here's what it looks like in Motion 5:

  

  Here is the title in Final Cut Pro X, where the animated text left aligned instead of centered:

  

  Want to make a copy of the Clone of the text layer, not bind.

• The title of the video (text) - cut into reading

  Can someone tell me why all the videos show this glitch on the title? A pixel or two seems to be cut off.

  

  It isn't when read out of the Cp/swf. With the help of v5.5.l

  You will be very expensive if the video editor should go back and change the position of the text on all the video files.

  Thank you very much

  Christine

  Christine

  Hi Christine,

  When you say "it isn't there when seen outside the Cp/swf." Using v5.5.l", means that this problem occurs only in a specific output?

  Try this - go to preferences - SWF size and quality and under customer, uncheck Compression project advance, republish the course and check the results.

  Thank you

  Anjaneai

• The landmarks of crop for cutting of the centre to secure title?

  I recently picked up the Premiere Pro 5.5 after the fiasco of Final Cut Pro X together, and a feature that I liked and used all the time in Final Cut Pro 7 missing in Final Cut Pro X has been for the cup of the centre in the title safe markers crop. I often make the HD which are broadcast on Center cut 4:3 TV, to do all the graphics for the Center cut to SD card and then leave protected space for the HD version.

  I don't see what I see these brands in Premiere Pro 5.5. Is there a place for requests for features for Premiere Pro, if I can put in a request, because this is something that is really needed in our workflow.

  Well, the PrPro Titler has the center align for both vertical & horizontal, but for guides, etc., it is free.

  I use the tips in this ARTICLE to create alignment markers, according to my needs.

  I have been filing feature requests for years and have also asked for alignment element since PS functions

  Good luck

  Hunt

  PS - I also create custom guides/grids for PiP, where I need to match the position & scale for PiP images.

  PPS - I guess you have looked at the title & Action Safe brands, and they just don't do it for what you need.

• I built a website for desktop PC with muse. I then converted it to available to phone, but all my pages are black. It doesn't have the layout I want and some elements are stacked and cut. Is there a way for me to transfer desktop to mobile site and I just

  I built a Web site in a muse to adobe for the office and tried to convert to mobile but all of my pages are blank and I want to edit the pages, because the elements of the page are more running and some are even cutting and it's ugly. can I just change the site or what I need to build a whgole new Web site from scratch?

  Hi John,.

  Please refer to cannot do Tablet and desktop phone versions

  Kind regards

  Akshay

• How to speed up a title analysis without cutting the length of the clip?

  Like I always find help on this forum, I hope that now I can't find the answer to my problem.

  I am putting together photos and I need to add analysis to each of them. Let's say the text is the BEST FOOTBALLERS OF ALL TIME.

  Now, I want THE BEST FOOTBALLERS to appear first, and shortly after he text OF ALL TIME.

  I use Premiere Pro Cs6 Adobre and no matter how many times I changed the pre-roll advertising, ease-in, ease-out and post-roll numbers, the first analysis is still very slow and the other very quickly. I will not cut the clip, I want to just speed up the analysis. Is this possible in first CS6?

  Thank you!!!

  Change the length of the clip on the timeline is the way to make it faster or slower.

• Property inspector CS6 - cut menus field title & target

  I rebooted the Dreamweaver hoping to fix the display in the property. I found that I'm not the only one experiencing this problem, http://forums.adobe.com/message/5454456- Please refer to the pictures for my change.

  I am running Windows 7.

  Can you advise me. Thank you.

  Judging by your screenshots, it seems that you have changed the font size in Control Panel > display. Unfortunately, this truncates labels in the property inspector and other parts of the Dreamweaver UI. The solution is to use the default font size and change your screen resolution.

• When I cut my computer on it comes up telling me that the battery cannot be detected or displayed.

  original title: battery problem

  To all,

  When I cut my computer on it comes up telling me that the battery cannot be detected or displayed.

  I unplugged the battery taken power and put it back it, that did not work,

  The battery is fully charged and when I check the battery in the control panel for the strength of the battery, the system is telling me, it is fully charged and there is nothing wrong with my battery.

  Then I ask why I get this error when I start my computer.

  Can anyone help me on how can I do to fix it.

  Thank you

  Russell Froedge

  Hello

  Check with support from the manufacturer of their books online and the drivers and their forums system
  (as applicable) for known issues. Some manufacturer issued BIOS and other updates to help the battery
  problems.

  Control Panel control - plan change Options - power plans - power - advanced settings
  Parameters for the drainage and the use of parameters (this is how much to use and not how much or how)
  long to load).

  In fact, what causes a lot of wear on a battery empties it too low on several occasions. With today
  systems overload are not a problem.

  Here are some tips to help and troubleshoot battery issues.

  Old battery? Unplug the power to the computer - remove the battery and clean the contacts with a pencil
  eraser (do not use this, if your battery is fine slots - just clean up the edges of the knife which fit in)
  them and be careful). Batteries are old, or it could be a problem with the computer.
  Check with the support of the machine system, and many of them have on line forums.

  New Lithium-Ion type battery usually last longer if you do not unload then less than 30%
  However on a laptop that not extend their life a lot. Best is to use the a/c adapter
  When this is possible.

  I use the free version of BatteryBar to monitor my battery. Click on the green button on the
  Yellow box on the right side of the page to download the latest stable version.

  BatteryBar - free version available
  http://osirisdevelopment.com/BatteryBar/index.html

  Another good program

  Vista battery saver - free
  http://www.codeplex.com/vistabattery

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  You can also check with the manufacturer of system and forums that many use their own
  proprietary software to monitor the battery and they could be known problems with your battery.

  ============================================================

  Try this - to make a Restore Point

  How to create a Vista System Restore Point
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  Then Control Panel - Manager of devices - Batteries - Double click on each item - drivers - tab
  Update the drivers (which can do nothing) - then do a right click and UNINSTALL each.
  RESTART which will update the driver stacks.

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• How the clip markers can be promoted in chronological markers?  I cut a clip and rearranged the order of the pieces in the timeline panel, so now I want a set of benchmarks that reflect their position in the timeline panel.

  Clip markers have as their frame of reference of the timeline, they came.  If you create a new brand of element in a new timeline, the marker in time is measured from his original script, not the new timeline where he is.  Currently in CC 2015 organization there is no way to translate the clip marker references 'Local' in the 'World calendar"in which they now live.  I captured on video a 8mm film that is chronologically jumble of short scenes.  I placed the chronology of chapter for each scene markers, export the list of markers and finally understood the rearrangement of pieces of scenes he needed to put everything in chronological order.  Thank God for the ability to export the list of markers, just as I needed!  So the whole sequence has 85 chronological markers, dividing the sequence into 5 pieces and rearranging puts them all in chronological order.  Obviously, I don't want to have to restore the scene boundries 85 times, I did as a necessary step to solve the puzzle.  I think you might meet one day some of these problems:

  1. the most obvious thing is located in the calendar for a piece, lift it and 'paste insert' where it belongs on the timeline.  Problem: Lift or excerpt from don't lift or extract chronological markers with it, so when "Insert you a block", the piece inserted in the timeline has lost its bearings, they were left.

  2. How about you make a sous-suite of the segment to move?  Yes, it carries all the tracks, but not the chronological markers whence he came.

  3. ok, I'll export the calendar together with chronological markers and reimport - ah, Yes, success, the chronology of the markers are now item, marks on the imported clip (the entire chronology).  That's great, because the clip markers are sticky with the clip, I can it chop, rearrange to put markers in chronological order without returning any info title marker.  Feeling beat with the reorganization completed five segments of the original timeline, everything is in order, nothing was reinstated, the timeline with its clip of chapter markers is ready to export to still make the DVD!  Yes, you guessed it, element chapter marks are not exported in yet.  The chronology of imports still with a marker, Chapter 1, at the beginning.

  4. There must be a way, stacked the timeline with the time markers on it on the icon for "New"... ', it is the same as #3 above, but simpler.  Historical markers are now the clip markers that don't export in yet.

  From my experiences, it is therefore impossible to solve my problem without completely restoring scene boundries and type chapter titles.  There are two repositories coordinated, clip) 1 local and 2) global chronology; and there is no way to go from one to the other 'mass'.   There is the glove, I'm sure someone has a way to do this without returning the title of chapter 85 markers.

  I have not found an automatic way to do this, but here is an efficient manual method that requires no titles of chapters Overtype.

  Either drop your timeline that has mounted the icon "Create New" brands, or export the timeline and import it back.  You now have a new timeline and markers are now on the video clip.  Now, chop and reorganize this video clip, it is in the best new order, and the clip markers stick with the sections of the clamp.  Now this procedure migrates the markers of the clips to the timeline (promotion):

  Start at the beginning of the timeline, select the video clip. (The video clip must be selected for M to open the marker editing window)

  1. type change M to find the first element brand, type M to open the editing window of clip marker, select the marker title and copy (control-C), hit Cancel

  2 hit the icon of reference in the program monitor pane, which puts a green marker on the timeline at the same time as the brand of element,

  3. double-click on the Green marker, paste the title of marker by control V, select the radio button of chapter markers, click OK.

  Repeat steps 1-3 to promote all the markers of clip of historical markers with the same marker titles.  Since we cut the timeline to reorganize, there are several video clips.  As you progress, make sure that the clip that you are working on is selected, otherwise M will not open the editing window, instead, it will place a chronological marker.  In short, follow this procedure exactly, it works.  It's a stupid job, but it does the job with without having to retype marker titles.  The chronology chapter titles now think time on the new timeline and they will export in yet.  Hope someone finds it useful at some point in the future.

  Perhaps team first see the usefulness of this and add a command 'Promote the clip for mounting marks markers' and "retrograde chronological markers for the clip markers" (conservation type, title and comments).  It would be a powerful addition.

• Titles of lower thirds on transparent background in After Effects will not export with Alpha channel

  I created titles of lower thirds in After Effects CS6 on an iMac Yosemite 10.10.5 running with a transparent background.  I want to make this file to be used as overlay on a video editing with Final Cut Pro.  I chose RGB + Alpha in the rendering stack, but it does not work to preserve transparency, and titles are degraded as well.  Is there a solution for this?  I also tried the CS6 Adobe Media Encoder, with no better luck.  Please notify.

  Use your ProRes 4444 codecs.  PNG, or Animation.  No other file QT supports alpha channels.

• Titles do not update

  When I place a title on the timeline in Final Cut Pro X and then I make a change to this title, say expand the police, that he does not play with the change.  If I then enter the title and move it a bit on the timeline, it updates correctly and plays.  This happens often.  I tried to use the menu "selected render' but it does not fix it.  In any case, why are my titles not updated when I adjust them?  This isn't simply by changing the size, it could be the color or anything like that.

  Try holding Option + command like FCP X starts.

  You can reset the preferences.

  What is the specific title or is this all of them?

  Al

• The fence, restore down and minimize buttons cut with any theme I use on Windows 10.

  Hello

  A little history: I've always been a user of Chrome and thought I'd give Firefox a test desktop because mobile is so much faster than Chrome on mobile.

  Now to the question. I have 10 windows, and I use the latest version of Firefox. Now, every time I install a theme from the Firefox store, the close 'X' and restore buttons get cut and reduce the button is completely invisible. This is aa a few screenshots of different themes:

  http://imgur.com/qltW96u
  http://imgur.com/NqFENd3
  http://imgur.com/xqIuePc

  I read some posts similar to mine, but they related to Windows 7, and the suggestions he had to change the theme of Windows to the default. I did that as well, with no luck.

  Everyone knows these issues? Does anyone know how to fix this?

  Try setting browser.tabs.drawInTitlebar to false on the topic: config page to disable the display of the tabs in the title bar.

  You can open the topic: config page via the address bar.
  You can accept the warning and click on "I'll be careful" to continue.

  • http://KB.mozillazine.org/about:config