Cycle time

Similar Questions

• Help in the calculation of the Total Cycle time in days

  All,
  
  How to calculate the total duration in days... I have the start date, Date added, Date of the assignment and the Date of the seller
  
  Concerning

  number of days between the Start Date and Date added:

  TIMESTAMPDIFF (SQL_TSI_DAY, StartDate, AddedDate)

  The same model for others...

• Time Machine extremely slow after upgrade to El Cap

  Time Machine problem with upgrade to Yosemite to El Cap on a laptop MBPr 15 "mid-2012.

  Time Machine backup plan: by wifi or LAN cable for two different hard disks attached to a Mac Mini that is on the local network. Two USB mini drives would serve as a backup for a total of 4 Mac disks at home.

  Behavior of Time Machine in Yosemite: dead normal. Backups were fast (10 Mbit/s in wifi, 80 MB/s when I plugged the MBPr on my LAN using a bolt of lightning for the Ethernet card.) Restored backups (I test them sometimes) fine.

  I upgraded yesterday to El Capitan. Behavior of the time Machine now: excruciatingly slow. All the steps (preparation, backup, cleanup) takes hours. My laptop was connected to the wired LAN for 9 hours now and is only 1.26 GB thanks to a backup of 3.82 GB. Speed (from MenuMeters) is under 10 KB/sec - Yes, it is * kilogram * bytes/s.

  Speed of transfer of files between the two machines via drag & drop is very good, ~80MB/sec both on the LAN, about 12 MB/s in wifi. Laptop computer interacts with the web at normal speeds. It does not appear that Time Machine, which is watered, and only on my laptop of Capitaned newly-El. My other domestic machines (all on Yosemite still) back up normally.

  I tried:

  -power / reboot both machines.

  -power / restart the LAN together.

  -cycle Time Machine power switch in the Prefs system.

  -Remove the two drives as backup targets TM laptop, then re - specify with preferences TM;

  -other things that I found through the search for this problem.

  It is a common problem in judging by the many valuation model who met it. I searched a lot and found nothing that helped me.

  I can't work without a viable backup. For now, I use Carbon Copy Cloner to duplicate my SSD MBPr for an external hard drive. Not really satisfying.

  Did someone solved this problem? Can someone tell me or suggest a solution? Thank you very much!

  Please make a copy of test in the Finder of the source for the backup volume. Is it too slow? Delete the files copied from the backup volume after the test.

• NEITHER 6585 loop back and loop single temporal cycle.

  I use a NI 6585/SMU-7961 I am developing an application where I do the source syncrounsu communications.  At the moment I don't have the material which will issue for me.  I am trying to set up a situation where I can just make a loop back on myself and send a signal of a connector and receive it in another.  The issues I'm having, it's trying to simulate how the implementation will be once I get harddware real is that when I export a clock I can't use this clock on connector A connector B because she goes to the same line in connector where a clock is exported. Any way to change the line that the clock is exported on and then use this line as a clock signal?

  Secondly, when I use an external clock or internal with a loop of single cycle time is the beginning of each itteration of the loop on a rising clock edge?

  BCAT says:

  Any way to change the line that the clock is exported on and then use this line as a clock signal?

  No, this is no way to change the line that the clock is exported or imported. You will need two rooms in small groups if you want to do a loopback test as you said.

  http://sine.NI.com/NIPs/CDs/view/p/lang/en/NID/210386

  With two of these tips, you will be able to deliver the DDC CLOCK Out of one of the connectors SDC at the world clock of the other connector of CSD using some SMA cables.

  BCAT says:

  Secondly, when I use an external clock or internal with a loop of single cycle time is the beginning of each itteration of the loop on a rising clock edge?

  Yes.

• FPGA: Vs timed loop Timer?

  Hello

  I would like to create a FPGA loop that runs at a fixed rate. Whatever if I use a timed loop structure or a timer loop express VI into a regular while loop? Under what circumstances should I choose one over the other?

  I understand that the timer loop approach can cause the code in the loop run twice before calendar is established (but this isn't a problem for me here). Are there other differences in the two approaches?

  Thanks in advance.

  JKSH wrote:

  But my question was about the differences between the use of "multi-cycle" Timed loops and VI express loop timer.

  In a targeted FPGA VI, all call loops are single cycle timed loops (SCTL).  This means that all the code in a SCTL must run in a clock cycle, so there are a few types of nodes cannot be used in such a loop.  In a used while loop with a timer, you can use a wider range of features, but the loop will generally run much more slowly.

  These documents may be useful to learn how to use loops clocked on FPGA:

  Using loops of Cycle time unique to optimize the FPGA VIs

  Optimization of your screws of LabVIEW FPGA: running in parallel and Pipelining

• Help with the calculations of time

  I tried several searches but can't seem to find what I need to do. I need to read a file with two columns, the first column is the time of an event. Then I need to calculate the time between each event (row). I know I have to use a loop to read the file but I cannot find any information on what the best way to calculate the time between each event so that I can get statistics such as average time per cycle, time since the last cycle, etc.. The only way that I can think is to read the file as a string and then parse time, but that doesn't seem like an effective way of doing things.

  example: data.csv

  08:00 10

  08:12 8

  10:00 2

  11:12 3

  Use '% <%H:%M> t' as format string instead. Capital T formats time as an absolute time, which according to your format is not what you are working with. The tiny t he reformatted as a relative timestamp and you should be able to calculate your time between events of.

  Hope this helps,

  Rob

• Movement of deviation average, allowed, &amp; stamp measure of time

  Hello

  I have this vi that measures data, findings, average cost, and suppose that to count the number of times wherever it exceeded the permitted deviation and the time stamp of every time a measure is greater than the threshold value of the running average. There is a problem in my algorithm, can someone please take a look?

  Known issue:

  -number of exceeds time should reset only when cycle time = time spent.

  I'll be happy to hear any suggestions you may have.

  Thank you

  You can go there. I think that's what you want.

• Why the execution time increases with a while loop, but not with "run continuously?

  Hi all

  I have a problem of severe weather that I don't know how to fix it because I don't know exactly where it comes from.

  I order two RF switches via a data acquisition card (NI USB-6008). One job at the same time can be selected on each switch. Basically, the VI created for this feature (by a colleague) resets all the outputs of acquisition data and active then those desired. It has three entrances, two chain simp0le controls and a cluster table, that contains the list of all the outputs and some practical information to know what is connected (specific to my application).

  I use this VI in a complex application, and I have some problems with the execution time, which increased whenever I said the VI, so I did a test VI (TimeTesting.vi) to determine where the problem came. In this special VI I record the execution time in a csv file to analyze then with excel.

  After several tries, I found that if I run this criterion VI with the while loop, execution on every cycle time increases, but if I remove the while loop and use the funtionnality "Continuous run", the execution time remains the same. In my high level application, I have while loops and events, and so the runtime increases too.

  I someone could explain to me why execution time increases and how can we avoid this? I have attached my VI test and the necessary subVIs, as well as an image of a graph that shows the execution time with a while loop and «run permanently»

  Thanks a lot for your help!

  Your SetReset_DO VI creates a channel whenever it is called.  And that you never delete a task.

  When running continuously, that it's as if it only runs once and LabVIEW has internal mechanisms to close references that will not be used again.  When a VI is used as a Subvi, LV does not know if she will be called again, and lacks these things until the first level VI stops. You have a memory leak.

  Just as you open and close your file outside the loop for, create your channel out of the loop.

  Lynn

• Why can't Norton Identity Safe compatibility be integrated into the latest versions of Firefox? IE seems not to have problems with it.

  Firefox constantly asks me to upgrade to the latest version, which is not a problem as long as the new generation is compatible with applications that I serve throughout and rely on every day. I use the 40.0.3 version and it wants me to update to 41.0.2. If the Norton Identity Safe toolbar work with my current version of Firefox, what is the compatibility issue with a newer version of Firefox? IE does not appear to have this problem of update... which makes me consider the switch back to IE as my default browser. I rely on the Identity Safe to take care of my connection problems, and there is no need to deal with problems of incompatibility. I know I'm not alone in finding this aggravation with updates. (I use Win7 Home Premium, 64-bit).

  Sorry, this is a change in the types of code Add - ons are allowed to include. It was supposed to change in Firefox 40, but at the request of vendors such as Symantec, it was postponed to 41 of Firefox. I don't think this change will flip over. Norton is working on a new version, but I understand that it takes longer than expected.

  Here's what I suggest for users who need Norton password security features:

  Instead of freezing your Firefox on a non secure version, consider using the Extended Support Release (ESR). It is designed for businesses that require a cycle time longer between changes to the features, but anyone can use it. ESR is currently based on Firefox 38. It will get updates of security over the coming months, but not to get new features, so changes in Firefox 41 concerning the compatibility of the add-on will not be out for a good time.

  Norton is likely to continue to support the ESR until the new toolbar update is finished, maybe next month. After that, I don't know what they will do because normally they don't take over a small range of versions.

  If you decide to try it, here's how I suggest to install:

  Clean reinstall it

  We use this name, but it isn't about deleting your settings, this is to ensure that the program, files are clean (not incompatible, corrupt or exotic code files). As described below, this process does not disrupt your existing settings. Don't uninstall NOT Firefox, that does not need.

  (A) download a fresh Installer for Firefox 38.3.0esr of https://www.mozilla.org/firefox/organizations/all/ in an ideal location. (Scroll down your preferred language).

  (B) the release of Firefox (if any).

  (C) simply rename the program folder, either:

  (Windows 64-bit folder names)

  C:\Program Files (x86)\Mozilla Firefox
  

  TO

  C:\Program Files (x86)\Fx41
  

  (Windows 32-bit folder names)

  C:\Program Files\Mozilla Firefox
  

  TO

  C:\Program Files\Fx41
  

  (D) run the installer downloaded to (A). It should automatically connect to your existing settings.

  Success?

  Note: Some plugins can only exist in the old folder. If it is missing something essential, present in these files:

  • \Fx41\Plugins
  • \Fx41\browser\plugins

• where can I find firefox for Windows 10 who support the JavaScript and Norton

  I had problems all this Sunday can not enter in the emails. bankAccounts or facebook because allways firefox41 tell me I need to install and activate JavaScript. I have Windows installed 10. My laptop is 1 year old HP. I also prefer to use Norton. What can I do? Can Andy I find an older version of Firefox in Norwegian?
  Thanks for listening.
  Michele your

  Firefox's JavaScript should be enabled by default. Can you provide more information about the messages that you have found on this subject?

  At the same time, to examine the question of Norton and your language:

  Norton has been a big topic of communication of updates for Firefox via LiveUpdate a few days before each new version of Firefox is available. But that changed with Firefox 41. Due to the change in Firefox (which was originally going to be in 40 Firefox but was delayed at the request of Norton and maybe a few other companies), the toolbar needs major changes and they are still not available yet. Norton issued a statement on this subject: https://support.norton.com/sp/en/us/home/current/solutions/v115161915_EndUserProfile_en_us

  If you want to use an updated version of Firefox that allows to run the current Norton Toolbar, there are another option. You might consider a different variant of Firefox called the Extended Support Release (ESR) for the moment. ESR is designed for businesses that require a cycle time longer between changes to the features, but anyone can run it.

  ESR is currently based on Firefox 38. It will get updates of security over the coming months, but not to get new features, so changes in Firefox 41 concerning the compatibility of the add-on will not be out for a good time.

  Norton is likely to continue to support the ESR until the new update of toolbar. After that, I don't know what they will do because normally they don't take over a small range of versions.

  If you decide to try it, here's how I suggest to install:

  Clean reinstall it

  We use this name, but it isn't about deleting your settings, this is to ensure that the program, files are clean (not incompatible, corrupt or exotic code files). As described below, this process does not disrupt your existing settings. Don't uninstall NOT Firefox, that does not need.

  (A) download a fresh Installer for Firefox 38.3.0esr of https://www.mozilla.org/firefox/organizations/all/ in an ideal location. (Scroll down your preferred language).

  (B) the release of Firefox (if any).

  (C) to rename the program folder, either:

  (Windows 64-bit folder names)

  C:\Program Files (x86)\Mozilla Firefox
  

  TO

  C:\Program Files (x86)\Fx41
  

  (Windows 32-bit folder names)

  C:\Program Files\Mozilla Firefox
  

  TO

  C:\Program Files\Fx41
  

  (D) run the installer downloaded to (A). It should automatically connect to your existing settings.

  Success?

  Note: Some plugins can only exist in the old folder. If it is missing something essential, present in these files:

  • \Fx41\Plugins
  • \Fx41\browser\plugins

• No Adobe tag seems to be pulled with DTM switch installed

  Hello

  Debugging a Web site in order to validate the Adobe using DTM switch tags (i.e. DTM installed), he seems to have no shot at all tags while the same are being fired in other browsers.

  Thank you and best regards,
  Aastha Chaudhri

  This extension uses the module 'widget', which no longer exists in Firefox 40. The extension must be updated. You can contact the author to see if an update is planned (if they know the problem): http://www.searchdiscovery.com/contact/

  In the meantime, if you can't do what you need to do without this extension, you can switch to another variant of Firefox called the Extended Support Release (ESR) (temporarily?). This is designed for businesses that require a cycle time longer between changes to the features and is currently based on Firefox 38. It will get updates of security over the coming months, but not to get new features, so changes related to the compatibility of the add-on will not be out for a good time.

  If you decide to try it, here's how I suggest to install:

  Clean reinstall it

  We use this name, but it isn't about deleting your settings, this is to ensure that the program, files are clean (not incompatible, corrupt or exotic code files). As described below, this process does not disrupt your existing settings. Don't uninstall NOT Firefox, that does not need.

  (A) download a fresh Installer for Firefox 38.2.1esr of https://www.mozilla.org/firefox/organizations/all/ in an ideal location. (Scroll down your preferred language).

  (B) the release of Firefox (if any).

  (C) to rename the program folder, either:

  (Windows 64-bit folder names)

  C:\Program Files (x86)\Mozilla Firefox
  

  TO

  C:\Program Files (x86)\Fx40
  

  (Windows 32-bit folder names)

  C:\Program Files\Mozilla Firefox
  

  TO

  C:\Program Files\Fx40
  

  (D) run the installer downloaded to (A). It should automatically connect to your existing settings.

  Success?

  Note: Some plugins can only exist in the old folder. If it is missing something essential, present in these files:

  • \Fx40\Plugins
  • \Fx40\browser\plugins

• Tecra A8-104 (PTA83E) - overheating

  Hello everyone!

  I have a problem with the laptop of my father. If I try to use it to its maximum performance, that it overheats and acceleration down the processor. I would use this laptop as a folding (folding@home) station. However this will make hot processor. If I test the notehbook with Intel Thermal Analysis Tool (http://www.techpowerup.com/downloads/392/mirrors.php), and less then 5 minutes he spent 65 95-100 ° C (normal temperature) and the handle to the bottom of its cores. Folding @ home spirits so the processor about the same as Intel Thermal Analysis Tool.

  My question: I have a defective laptop or incorrect design this type of laptop is not working 100% for more than 2 minutes, the processing power?

  When you reach the temperature 95 C the fan will start working more hard, but despite this it is not enough to lower its temperature is lower than the control temperature.

  Here are the technical specifications:

  Number of processors 1
  Number of cores 2 per processor
  Number of threads per processor 2
  Name Intel Mobile Core 2 Duo T7200
  Code-named Merom
  Specification Intel (r) Core (TM) 2 CPU T7200 @ 2.00 GHz
  The Socket 479 mPGA package
  Model family, not to not 6.F.6
  Family expanded/model 6.F
  Core Stepping B2
  65 nm technology
  Basic speed 1995,0 MHz
  Multiplier x Bus 12.0 x 166,3 MHz speed
  665,0 MHz rated Bus speed
  Stock frequency 2000 MHz
  MMX, SSE, SSE2, SSE3, SSSE3, EM64T instruction sets
  Data L1 cache (per processor) 2 x 32 KB, size 8-way line set associative, 64 bytes
  L1 instruction cache 2 x 32 KB (per processor), size 8-way set associative line, 64 bytes
  4096 kilobytes (per processor) L2 cache, size 16-way set associative line, 64 bytes
  Memory & Chipset
  Northbridge Intel i945GM Rev 03
  Southbridge Intel 82801GHM (ICH7-M/U) Rev B0
  Memory type DDR2
  Memory size 4096 MB
  Frequency memory 332,5 MHz (1:2)
  Latency CASE clocks # (tCL) 5.0
  RAS # for CASE # (tRCD) 5 clocks
  RAS # Precharge (tRP) 5 clocks
  Cycle Time (tRAS) 15 clocks
  21 (tRC) Bank Cycle time clocks
  System
  The TOSHIBA system manufacturer
  System name TECRA A8
  S/N 27156797H system
  Mother TOSHIBA card provider
  Portable mother PC card model
  The TOSHIBA BIOS Editor
  Version of the BIOS Version 3.30
  Date 14/02/2007 BIOS
  Memory SPD
  Module 1 DDR2, PC2-5300 (333 MHz), 2048 MB, Kingston
  Module 2 DDR2, PC2-5300 (333 MHz), 2048 MB, Kingston
  Software
  Windows Version Microsoft Windows Vista (6.0) Business Edition Service Pack 1 (Build 6001)
  Version of DirectX 10.0

  Hello

  Dust and debris could be the main reason why the laptop overheats.

  Usually, the cleaning of the dust is not part of the service guarantee but I strongly recommend to contact the technicians of laptop for a cleaning of the dust.
  Usually, the dust can be removed easily using the jet of compressed air. These aerosols can be purchased from most computer resellers.
  They offer for most cleaning sets.

  But once again; If you have any experience with these procedures and you warranty is still valid, then a technician should clean your fans to avoid a cancellation of the guarantee.

• Tecra A8 Normal CPU temperature question

  Hi all...
  Can someone let me know what is the value of the ideal temperature for the laptop above?
  Processor (s)

  Number of processors 1
  Number of cores 2 per processor
  Number of threads per processor 2
  Name Intel Mobile Core 2 Duo T5500
  Code-named Merom
  Specification provided® Corea? ¢ 2 CPU T5500 @ 1.66 GHz
  The Socket 479 mPGA package
  Model family, not to not 6.F.2
  Family expanded/model 6.F
  Core Stepping L2
  65 nm technology
  Basic speed 1662,5 MHz
  Multiplier x Bus 10,0 x 166.2 MHz speed
  665,0 MHz rated Bus speed
  Stock frequency 1666 MHz
  MMX, SSE, SSE2, SSE3, SSSE3, EM64T instruction sets
  Data L1 cache (per processor) 2 x 32 KB, size 8-way line set associative, 64 bytes
  L1 instruction cache 2 x 32 KB (per processor), size 8-way set associative line, 64 bytes
  Cache (per processor) L2 2048 kilobytes, size 8-way line set associative, 64 bytes

  Memory & Chipset

  Northbridge Intel i945GM Rev 03
  Southbridge Intel 82801GHM (ICH7-M/U) Rev B0
  Memory type DDR2
  Memory size 2048 MB
  Frequency memory 332,5 MHz (1:2)
  Latency CASE clocks # (tCL) 5.0
  RAS # for CASE # (tRCD) 5 clocks
  RAS # Precharge (tRP) 5 clocks
  Cycle Time (tRAS) 15 clocks
  21 (tRC) Bank Cycle time clocks

  System

  The TOSHIBA system manufacturer
  System name TECRA A8
  S/N 37058649H system
  Mother TOSHIBA card provider
  Portable mother PC card model
  The TOSHIBA BIOS Editor
  Version 3.40 BIOS version
  Date of the BIOS 03/12/2007

  Memory SPD

  Module 1 DDR2, PC2-5300 (333 MHz), 1024 MB, Kingston
  Module 2 DDR2, PC2-5300 (333 MHz), 1024 MB, Kingston

  Software

  Windows Version Microsoft Windows XP Professional Service Pack 3 (Build 2600)
  DirectX version 9 .0c

  Here are the specs. Can someone tell me which is the normal temperature of the CPU of the laptop above?

  Hello

  The CPU temperature depends on the use of the laptop and so it s not easy to say what would be the value of the ideal temperature.

  According to this site of specification Intel CPU T5500 CPU temperature could affect up to 100 ° C
  http://processorfinder.Intel.com/details.aspx?sSpec=SL9SQ

  But of course the internal CPU for laptop is much lower.
  Running common applications temperature could increase to 50-60 ° C

  Good bye

• Satellite L500-22R - memory problem

  I tried to upgrade my Toshiba L500-22R memory up to 8 GB. I bought 2 x 4 GB Kingston SODIMM 12800 PC3L, the operating system does not start, I did a check of memory and it fails too. I tried with a Samsung 4 GB 12800 and it fails too.

  The original memory works well.

  Any ideas?

  TXT of CPU - Z report:
  CPU - Z version 1.72.0.x64

  Information for processors
  -
  Processor 1 ID = 0
  Number of cores 2 (max 8)
  Number of threads 4 (max. 16)
  Name Intel Core i5 430M
  Code-named Arrandale
  Specification Intel (r) Core i5 CPU M 430 2.27 GHz
  Package (platform ID) Socket 989 rPGA (0x4)
  CPUID 6.5.2
  CPUID long 6.25
  Core Stepping C2
  The 32nm process technology
  TDP limit 25.0 Watts
  Basic speed 1187,2 MHz
  Multiplier x Bus 9.0 x 131.9 MHz speed
  2374,3 MHz rated Bus speed
  Stock frequency 2266 MHz
  Instructions sets MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, EM64T
  Data L1 cache 2 x 32 KB, size 8-way line set associative, 64 bytes
  L1 instruction cache 2 x 32 KB, size 4-way set associative line, 64 bytes
  L2 cache 2 x 256 KB, size 8-way line set associative, 64 bytes
  Cache 3 MB L3, size 12 channels line set associative, 64 bytes
  FID/VID control Yes

  Chipset
  -
  Northbridge Intel Havendale/Clarkdale Host Bridge Rev 02
  Southbridge Intel HM55 Rev. 05
  Graphics interface PCI-Express
  Width link PCI-E x 16
  PCI-E Max Link width x 16
  Type of DDR3 memory
  Memory size 4 GB
  Double channels (symmetrical)
  Memory frequency 527,6 MHz (04:16)
  Latency CASE # (CL) 7.0
  RAS # for CASE # delay (tRCD) 7
  RAS # Precharge (tRP) 7
  Cycle Time (tRAS) 20
  Time to Row Refresh Cycle (tRFC) 60
  Control rate (CR) 1 t
  Base address e/s MCHBAR 0x0FED10000
  E/s MCHBAR size 4096

  Memory SPD
  -
  DIMM # 1
  SMBus address 0 x 50
  Type of DDR3 memory
  Format of SO-DIMM
  Manufacturer (ID) Samsung (CE000000000000000000)
  Size 2048 MB
  Bandwidth Max PC3-8500F (533 MHz)
  M471B5673FH0-CF8 part number
  Serial number 62B15B6F
  Date 12/year, 10 weeks of manufacturing
  Number of banks 8
  Nominal voltage 1.50 Volts
  EPP no
  XMP no
  AMP no

  DIMM # 2
  SMBus address 0 x 52
  Type of DDR3 memory
  Format of SO-DIMM
  Manufacturer (ID) Samsung (CE000000000000000000)
  Size 2048 MB
  Bandwidth Max PC3-8500F (533 MHz)
  M471B5673FH0-CF8 part number
  Serial number 62B15B87
  Date 12/year, 10 weeks of manufacturing
  Number of banks 8
  Nominal voltage 1.50 Volts
  EPP no
  XMP no
  AMP no

  Model of card mother NSWAA (0x0000017A - 0 x 00035690)

  DMI
  -

  DMI BIOS
  seller TOSHIBA
  version 2.10
  day 05/17/11
  ROM size 2048 KB

  System DMI information
  Manufacturer TOSHIBA
  product Satellite L500
  version PSLS9E-02Q01TCE
  series 3A747581K
  UUID {9ED22C15-2032-DF11-B751-705AB6880D1F}

  DMI Baseboard
  seller TOSHIBA
  model NSWAA
  Revision 1.00
  series 123456789AB

  Of course, you bought not compatible modules.
  PC3 12800 1600 Mhz isn't listed as a module support.

  Satellite L500 can scale up to 8 GB of RAM and you can use two modules MHz (PC3-8500) 4 GB DDR3 SO-DIMM 1066.

• HP Pavilion 15-p054su (J8D22EA) driver for USB 3.0

  Hello!

  I recently bought the Pavilion 15 - p054su and I installed win 7 64 bit, everything works ok except my usb 3.0 ports.

  I tried to install several drivers but nothing helped. Last I tried is the expandable controller from intel, but when I try to install I get a message "your computer is unresponsive to the minimum requirements of the system.

  CPU:
  Intel Silvermont
  Hearts 4
  Son 4
  Name Intel Silvermont
  Codename Silvermont
  The Socket 1380 BGA package
  The 22nm technology
  Specification Intel Pentium CPU N3530 2.16 GHz
  Family 6
  Extended family 6
  Model 7
  Model expanded to 37
  Not to not 8
  Instructions, MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, Intel 64, NX, VMX
  Virtualization made supported, disabled
  Taken hyperthreading supported, disabled
  83.3 MHz bus speed
  Base speed 2166 MHz stock
  Stock of 83 MHz Bus speed

  Memory:
  Type DDR3
  MB size 3992
  DRAM 666,7 MHz frequency
  CASE # latency (CL) 9 clocks
  # For CASE # Delay (tRCD) RAS 7 clocks
  RAS # Precharge (tRP) 7 clocks
  Clocks of cycle Time (tRAS) 14

  Motherboard:
  Manufacturer Hewlett-Packard
  Model 227 b (CPU 1)
  Version 097C100000005F10000600080
  Intel chipset provider
  Model of chipset Host Bridge Trail Bay
  Chipset revision 0E
  Southbridge Intel supplier
  Southbridge model Bay Trail LPC Bridge
  Southbridge 0E review

  Graphics card:

  VGA Standard of Intel graphics card
  Intel manufacturer
  Standard VGA Graphics model adapt
  8086-0F31 device ID
  Revision F
  Subprovider HP (103C)
  Level of current Performance 0
  Version 6.1.7600.16385 driver

  http://WWW8.HP.com/BG/BG/products/laptops/product-detail.html?OID=7273524&JumpID=reg_r1002_bgbg_c-00...

  Someone please help and thank you!

  Hello:

  You need this driver USB 3...

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=23789