D1460 - advice on the replacement of the bulk bin

Similar Questions

• Need your advice, choose the best update for first Pro CC

  Need your advice, choose the best upgrade.

  Because nobody can have a computer that runs all functions as quickly as desired, we have manage their it resources according to your needs, budget and for the money. Below is a fundamental issue related to Adobe Premiere Pro 2015 CC.

  Need for better visualization without jerky look of a stutter and overall better performance incease.

  Would I do better with? (Choose one please)

  1. Passing of an SSD to 2 SSD in RAID 0 configuration - cost about $350.
  2. Getting my video card NVIDIA GeForce GTX 560 Ti for a NVIDIA GeForce GTX 970 overclocked to 4 GB GDDR5 graphics card - $350.
  3. From Win 7 Pro 64-bit to win 10 Pro 64-bit.

  Please explain why you made your choice.

  
  

  Thanks in advance,

  Tom
  

  Tom,

  At this point, you're pretty much stuck to a GPU upgrade. You see, that the GTX 560 Ti is not is properly supported in first Pro CC 2015 when it comes to acceleration GPU of MPE. As such, you may experience random program crashes and/or repeated which are fixed only when you disable acceleration GPU of MPE and run first in software mode only MPE.

  The other improvements are out of the question: the i7 990 X CPU uses the chipset Intel X 58 now-seven-year-old, whose native Intel SATA ports are limited to SATA II (3 GB/s or 300 MB/s) flow. All support 3 SATA or USB 3.0 on motherboards that use such an old chipset comes entirely from complement third-party chipsets to companies such as NEC/Renesas and Marvell. And we know how slow the Marvell SATA 3.0 ports work are compared with native Intel SATA 3 implementation on newer chipsets. Unfortunately, a CPU upgrade would have exceeded the maximum budget $ 350 because both the CPU and motherboard (and probably RAM as well) should be replaced by such upgrade. And additional SSD upgrades are out of the question because newer SATA SSD would have been restricted by the sustainable maximum rate of 270 MB/s of SATA II.

  Therefore, the only feasible upgrade would be a new GPU for your system now five-years.

  Good luck in your quest to upgrade,

  Randall

• Advice on the use of the oracle.apps.aia.core.eh.i18n.EHCorrectiveActionRB

  Hello
  
  I'm trying to implement the AIA error handling and reading that AIA provides xpath functions to retrieve the error code messages and corrective action messages. the documentation says that you must use the oracle.apps.aia.core.eh.i18n.EHCorrectiveActionRB listresourcebundle class to do this.
  
  My questions are:
  
  1. this oracle.apps.aia.core.eh.i18n.EHCorrectiveActionRB of the class already exists within the AIA in order to add the new error etc... you just need to change?
  2. If the above is true then where can I find this class to add new messages?
  3 this Listresource bundle must be implemented in all composite samples of AIA? If yes how can I do this?
  3. does anyone have examples that I can use to implement the management of errors?
  4. all other general advice on the use of this list of resources group
  
  Thank you for your help in advance.
  
  Kind regards.
  Adrian

  1. this oracle.apps.aia.core.eh.i18n.EHCorrectiveActionRB of the class already exists within the AIA in order to add the new error etc... you just need to change?
  Yes, they exist oob with FP. In 10g, it will be under system/classes/bpel file.
  2. If the above is true then where can I find this class to add new messages?
  In 10g, it will be under system/classes/bpel file. 11 g, it will be under /soa/modules/oracle.soa.ext_11.1.1/classes folder.
  3 this Listresource bundle must be implemented in all composite samples of AIA? If yes how can I do this?
  No, the bundle is a single resource, and you can add your messages in the same class.
  3. does anyone have examples that I can use to implement the management of errors?
  Please see available in OTN download AIADemo. All composite materials have the error handling.
  4. all other general advice on the use of this list of resources group
  11 g class of resource bundles is replaced by a file of text properties.

• I'm unable to use the button Delete even after following the advice of the FAQ. Reinstalled RESOLVED to backup

  Hello

         My Thunderbird Ver is 38.3.0 - Today my delete button stopped working and I went to the FAQ section on the Mozilla support and found the article and followed the instructions, deleting the directoryTree.json, panacea.dat and session.json I then went to the Mail folder and  I have listed POP.NTLWORLD.COM, pop.ntlworld-1.com, pop.ntlworld-2.com and so on to pop.ntlworld-7.com.
  

  I went in and deleted the files from the Recycle Bin and Trash.msf, close the window of opportunity of disorder and restart Thunderbird.
  The system their re created the trash folder and it replace 1329 files. So I went to the delete files in the Recycle Bin, they were then removed, still unable to suppress use at this time. SO I went again through the procedure as a whole. restart Thunderbird and always files 1329 all have been recreated. I therefore deleted their brand-new and went through the whole procedure again. Now, after the reboot, I have an empty basket but am unable to delete anything in the Inbox or the junk e-mail folder or the "sent" folder.
  I am now at a loss... Help please.

  Steve Bishop

  Hello

            I have taken the bull by the horns - so to speak - I deleted Thunderbird and restarted the computer. I have mozbackup and do regular backups so I installed the latest one and hey presto all is working again.
  

  I don't know what went wrong, but its maybe solved, a bit blunt, but I'm a happy Bunny now

  Steve Bishop

• Need some advice on the best way to do specialized source distribution

  I need to give a customer a labview block, they can use our material in their own labview code that will read the (encrypted) data net senor off the coast and the flow of data in a form usable output.  I built a vi that can be used in a loop, a bit similar to the block of canned labview data acquisition that can be used to acquire data from products OR.

  There are many sophisticated (and secret) algorithms going on in the background which make sense data and translate them into a usable data table, but also configure the hardware itself. Accordingly the only final vi I prepared to distribute the client makes use of Subvi about 20. Almost none of these subvis could be ideally be reconverted in plain code in main vi, nor what I want to do this.

  The rules of the game is the following: I want to give him the block I created to use its own code, without him to see what's happening inside the vi.  I can deny him access to the block diagram/s, no problem, but I don't want to give him access to the subvis, to use, or even to know their names - preference they would be hidden or otherwise pre-compiled. Preferably I would just give him the main block only, perhaps with some support files that would be entirely opaque to him.

  Looking for advice on the best way to go. There is an elegant solution to this problem? For example, it would be better to compile the block as a .dll file, and then write a wrapper vi any?

  Have you thought of creating a packed library? You can also password protect your code. You can delete the distributed code block diagrams. You can use a combination of the above as well.

• Is allowed to work on the computer while the bulk is scanning?

  Is allowed to work on the computer while the bulk is scanning? It slow it down or get him to Miss things because I continue to surf the net?

  Is allowed to work on the computer while the bulk is scanning? It slow it down or get him to Miss things because I continue to surf the net?

  I have no experience with MSE, but as a rule generally, you should NOT continue to surf the internet while doing a full scan of the system with any antivirus/antispyware utility.

• How do I find/recover a file deleted from a move/replace when the Recycle Bin is bypassed?

  Recently, I made a search for particular file template.  The Find dialog box, I selected all files returned by the search and trained in a backup folder.  Unfortunately, there were a few files with the same name and I selected by error "Replace" and the particular file I was interested has been moved or deleted.  I thought I was doing a copy, but the source files have been deleted.  I tried to run several file recovery programs, none of them found the files that have been deleted as a result of this move/replace operation (apparently the Recycle Bin is bypassed for this operation).  I know that the directory they are found, but the program is not all the deleted files in these directories.  Help!

  I recreated this scenario in Windows 7 with the same result.  How these files are deleted, and how to find them?

  Hi Jimstaff,

  Welcome to the Microsoft Answers site!

  Try to face a return of the folder that contains the files now and then try to restore to a previous version.

  Whenever a system restore point is created for your computer, an older version of each file is created. You can try to right click on this particular and select restore to the previous version. You may get different dates, which you can restore back.

  Try this if you have restore points created for folders. If this isn't the case, then there is no way how you can recover these files.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Do a clean install of Windows Vista 32 8.1; advice on the new partition formats.

  Hi, I'm going to do my clean install of Windows Vista 32 8.1 today.

  Need advice on the size for my new partition (s).

  Currently defined as the partitions:

  Total: free:

  OS (c                          99.7G          11.9G

  Data (D G 111, 14.5 G)

  HP_Recovery (E 12.0 G 1.97 G)

  I am running:

  Laptop HP Pavilion DV9700 Entertainment

  32 Vista Home Premium, SP1

  Basically I want a suitable partition for the new Windows OS 8.1 (more room for restore points).

  And the rest of the data area, I guess, as if I had originally.

  Does anyone have any other ideas, because I start from scratch.

  Hi davisj-oaktree.

  To remove the Vista partition, I included the following two links http://bit.ly/1dWZLLn, and http://cnet.co/1dWZQii. Please check the information on each of these websites.

  Good luck!

• You want advice in the sale of 4.5 years old Alienware Aurora Alx

  Hi all

  Just for starters I don't have much experience with computers, computer hardware, etc. I intend to do a lot of research before I make any final decision on my desktop but my plan is to sell and look for a laptop. I appreciate all the advice.

  I have an Alienware Aurora Alx desktop computer (late 2011) with an Intel core i7 cpu 920 @ 267 GHz, 6 GB of RAM installed. I have 2 GPU AMD Radeon HD 5670 connected with AMD crossfire.

  I run a ton of different games on this issue at the highest graphics settings without any problem, Civ 5, LoL, cities: horizons, CS, Dota 2, Arma 2 and rocket League to name a few.

  I'm looking for just to get advice on the price range, where to sell, how to find buyers, etc. Any help is welcome and appreciated. Thank you for taking the time.

  You can compare your requirements with those of eBay. It is generally a good way to find a range of prices.

• Guard application launch at the start of the appliance, also need advice for the implementation of network methods

  Hi all

  I'm new to the development of Blackberry and I'm writing a relatively simple application to run on 7.1.

  So far the development was interesting, I managed to create my user interface using resources online (mainly this forum), but today I tried to implement some of the network classes that I need and now I just met constant problems.

  I use Eclipse SDK 3.7.2 (the one that comes with the plugin RIM)

  First question:

  I'm not sure what I changed, but today I noticed that whenever I start the Simulator (by sim 9360) my application is started during the initial startup process. I don't think he did this before, but to be honest, I wasn't paying much attention. I think it starts at the start of the device is because I put a breakpoint in the constructor for my class from the main screen, which is hit before the Simulator happens even to the point where it is ready for user interaction. In addition, once it is ready, if I press the BB button, I see my registered application.

  I don't have it set to automatic start in .xml descriptior enforcement.

  I started this application on the HelloBlackBerry sample, here is my main method for the entry of the application:

  public static void main( String[] args ) {
          appSettings = AppSettings.fetch();
          // Create a new instance of the application and make the currently
          // running thread the application's event dispatch thread.
          HelloBlackBerry theApp = new HelloBlackBerry();
          theApp.enterEventDispatcher();
          //openConnection();
  
      }
  
  
  

  As far as I know, this is the only entry point for the application.

  More code

      public HelloBlackBerry() {
          // Push a screen onto the UI stack for rendering.
          mainScreen = new ScreenHelloBlackBerry();
          pushScreen( mainScreen );
      }
  

  Here is the method of. my class AppSettings fetch()

      // Retrieves a copy of the effective properties set from storage.
      public static AppSettings fetch()
      {
          AppSettings savedSettings = (AppSettings) _store.getContents();
          return new AppSettings(savedSettings);
      }
  

  Some of this code that I wrote myself, the persistence store cause the launch of my car?

  I tried to reset the Simulator to the factory settings, no change.

  All applications initialized during the startup of the device and then closed shortly after?

  Part 2: Need advice for the implementation of functions of network in the application

  I need to implement some methods that will retrieve data from a web service, and I also need to send data to this service. What I've read, the ConnectionFactory is the way to go. I want my application to make a request when the application is open and can check on a set interval. I didn't know exactly how to go about adding another thread for networking, I understand that network connections should not be created on the thread main event, so I tried to do this:

  The constructor of my class that implements screen (ScreenHelloBlackBerry), I use the following to create a modal dialog box to prompt the user for a username, I also try networking wire in the same segment of spawning:

          public ScreenHelloBlackBerry(){...initialize fields and managers, add it all together...then near the end
  
  //This will open the confirm dialog when the application is launched
          UiApplication.getUiApplication().invokeLater(new Runnable() {
                public void run() {
                    openConfirmDialog();
                  //start connection - Possibly broken
                    ConnectionThread ct = new ConnectionThread();
                    ct.start();
                }
          });
  

  I don't know if it's somehow OK to do, but it seems to work for what I need. I want a user who launches the application at the prompt, and if a user switch applications, when they come back they wondered again (unless they close the app and reopen it).

  Here is my ConnectionThread:

  public class ConnectionThread extends Thread
  {
  
      public void run()
      {
  
            ConnectionFactory connFact = new ConnectionFactory();
            ConnectionDescriptor connDesc;
            connDesc = connFact.getConnection("http://www.google.com");
            if (connDesc != null)
            {
                HttpConnection httpConn;
                httpConn = (HttpConnection)connDesc.getConnection();
                try
                {
                    final int iResponseCode = httpConn.getResponseCode();
                    UiApplication.getUiApplication().invokeLater(new Runnable()
                    {
                        public void run()
                        {
                            Dialog.alert("Response code: " +
                                          Integer.toString(iResponseCode));
  
                        }
                     });
                    httpConn.close();
  
                 }
                 catch (IOException e)
                 {
                   System.err.println("Caught IOException: "
                        + e.getMessage());
                 }
            }
      }
  }
  

  At the moment it has basically unmodified code from a sample that I found, I'll be retooling to meet my needs whenever I can make it work. I HAD this work to the point where, after the closed user confirm this dialog, a few moments later a an alert dialog appears with the 302 response code. I don't know what changed, but now it doesn't work at all, and if I try to scroll with the debugger, I can't past the httpCon.getResponseCode (). I've seen some mistakes earlier on "no record of service was set up", and I also had once a timeout exception.

  I'm sure I'm doing this wrong, but at the same time as I said WAS working, and now it is not. If someone has done this far, thank you very much for your time and advice are much appreciated.

  Also, should I try to start the thread of the network of the UIApplication class instead of the screen? There is currently very little happening in the class that extends UIApplication, do I spend most of my business logic out of the class of the screen and in the UIApplication class?

  Thanks in advance!

  Hi all

  Just to conclude this topic for those who are interested, I found an excellent guide to the implementation of networks in applications of BB, click here for a link.

  About my application being started at the start of the simulator of the device, I found that on a device real this behavior is not complied with, and in addition, the behaviour seems to have stopped after uninstallation and reinstallation of my Simulator.

  See you soon,.

• Session at which was the bulk operations (DML) during the period determined in the Source database?

  Hi all

  
  

  How to find which session was in bulk (DML) operations on a particular period in the Source database?

  
  

  The source database: SRCDB - version: 11.2.0.3 (2 node RAC on RHEL OS)

  Target database: TGTDB - version: 11.2.0.3 (Non-RAC)

  Source-> target (United directional Replicat use of Goldengate)

  
  

  In our (source) database, I have observed that some inserts in bulk / updates which happened and because of this corresponding Replicat, database was a delay to apply updates/insert and there was a lag (treatment gap) happened in the target database.

  When I checked the source database, I was unable to find that the session/SQL caused the bulk INSERT/UPDATE/DELETE (batch), since the transaction has already finished.

  1. is as possible to get the story SQL_ID or generated Session operations more Redo/DML

  for example: the current time is 11:00 and I need to get the session/caused sql operations dml in bulk between 09:00 and 11:00?

  2. when I checked the history of SQL (dba_hist_sqlstat) time-based CPU, I found some instructions update. But I was unable to find the update caused SQL more updates to a table.

  For example: -.

  Update t1 set attribut1 = 'XX' where SHIPMENT_GID =': p1' / * it has updated 100 rows * /.

  Update t1 set attribut1 = 'XX' attribut1 = "YY" where SHIPMENT_GID =': p2' / * it has updated 5000 lines * /.

  Please provide relevant SQL to identify in above cases...

  Kind regards

  Veera

  column MODULE format a15

  column BEGIN_INTERVAL_TIME format a25

  column END_INTERVAL_TIME format a25

  Select distinct from a.*

  (

  Select sql.snap_id, sql.module, sql.sql_id, decode(t.command_type,2,'INSERT',6,'UPDATE',7,'DELETE') cmd_type,

  s. BEGIN_INTERVAL_TIME, s. END_INTERVAL_TIME, sql. EXECUTIONS_TOTAL, sql. ROWS_PROCESSED_TOTAL,

  SQL. ELAPSED_TIME_TOTAL/1000000 "elapsed time (in seconds).

  of dba_hist_sqlstat sql, dba_hist_snapshot s, dba_hist_sqltext t where s.snap_id = sql.snap_id and sql.sql_id = t.sql_id

  and s.begin_interval_time BETWEEN to_date ('03 - Apr - 2013 16:00 "," dd-mon-yyyy hh24:mi:ss')

  AND to_date ('03 - Apr - 2013 17:00 "," dd-mon-yyyy hh24:mi:ss')

  and sql.sql_id

  IN

  (

  SELECT distinct stat.sql_id

  Of dba_hist_sqlstat stat

  JOIN dba_hist_sqltext txt ON (stat.sql_id = txt.sql_id)

  JOIN dba_hist_snapshot snap ON (stat.snap_id = snap.snap_id)

  WHERE the snap.begin_interval_time between to_date ('03 - Apr - 2013 16:00 "," dd-mon-yyyy hh24:mi:ss')

  AND to_date ('03 - Apr - 2013 17:00 "," dd-mon-yyyy hh24:mi:ss')

  AND txt.command_type in (2,6,7)

  )

  ) a.snap_id asc order

  ;

  I hope that this sql help.

  Kind regards

  Harman

• Can you please give some advice on the ToolTip used in the new packaged applications

  Hello
  I use apex 4.1 theme 23.
  I would use the ToolTip used in the new packaged app.
  Can you please give some advice or the "Details" on ToolTip, used in the new packaged applications. for example: go live checklist request.
  Once we fly over "Check list items" region. We get the tootip.
  
  1. how to find the class "detailedStatusList".
  2. how to find "detailedStatusListToolTip();" JavaScript function used in "execute when Page Loads.
  3. is there a tool to generate the source in the region to "check list items.
  
  I don't know if there are more, I need to know...
  
  * the tooltip plugin isn't solid...
  
  Kind regards
  Water

  Good morning, water,

  My goal is to use it in IR for the column notes. I can't show all the notes on the report. so I use RPAD to show only the first words. and the rest should be available by using the ToolTip.

  Fact :D

  You need to use SUBSTR to restrict the notes to a few words, not RPAD.

• I changed the IR query as follows...

  select
  Deptno,
  Dname,
  Loc,
  substr(notes,1,25) || '<div class="long-notes" style="display:none;">'||notes||'