'DAC reference ground connection' property causes the other channel to stop working

Similar Questions

• I can connect to my home network, but all the other networks do not work...

  I can connect to my home network, but all the other networks do not work... Error window says:

  Windows could not connect to the (X)? network name?

  [Link] Solve problems

  [Link] Learn more about Internet connection problems

  I gave security, uninstalled reinstalled wireless - uninstall security firewall reinstall and not go...

  Windows 7

  Hello

   
  1. What network are you trying to connect to?
  2. You are not able to connect to the Internet?
  3. Are you able to connect to the other network with wired network?
   
  Try the methods provided and check.
   
  Method 1:
  Check out the link and follow the steps.
  What is network discovery?
  http://Windows.Microsoft.com/en-us/Windows7/what-is-network-discovery
   
  Method 2:
  Check out the link and run the troubleshooter.
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows
   
  Method 3:
  Reset the TCP/IP and check. Check out the link and follow the steps.
  How to reset the Protocol Internet (TCP/IP)
  http://support.Microsoft.com/kb/299357
  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756/ ) how to back up and restore the registry in Windows
   
  Method 4:
  Check out the links and check out them.
  http://Windows.Microsoft.com/is-is/Windows7/cant-connect-to-a-network

  http://Windows.Microsoft.com/is-is/Windows7/view-and-connect-to-available-wireless-networks

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

• Wireless network connection is connected with the strong signal, but stops working at random times

  Original title: internet says is connected with the strong signal, but stops working at random times?

  Hello
  For the last few weeks, I had problems with my internet connection. Wireless connections say I am connected and have the strength of the excellent signal. I know that this is not an ISP problem because my other computer works fine. I will be reviewed fine and then all of a sudden, the site doesn't load any more, although I'm always connected to the internet. This happens on Firefox and Internet Explorer, this isn't a browser issue.

  I read other offered on the internet and tried all, but nothing has changed. I have checked proxies, disabled antivirus and installed new, checked firewall, ran a check for malware, etc..

  Any help will be much appreciated because it becomes very frustrating to have to keep reconnected my internet when he says he's working.

  Hello

  I suggest you follow the links below and check them with the question:

  Method 1:

  Step 1:

  Start your computer in safe mode with network and check the number: http://windows.microsoft.com/en-US/windows7/Advanced-startup-options-including-safe-mode

  Step 2:

  You need perform a clean boot to prevent any third party conflicting application from interfering with your computer.

  To put the computer in a clean boot State, you must follow the steps in the article mentioned below and check with the question.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: You must follow step 7 of the article mentioned above to recover your computer to a Normal startup after you complete all the steps.

  Method 2:

  Uninstall and reinstall the NIC drivers and check with the question.

  a. click on Start menu, in the Search tab type devmgmt.msc and press ENTER.

  b. right click on network adapters, and then click on uninstall and restart the computer.

  c. after rebooting, install network cards and check with the question.

  For reference:

  How can I troubleshoot network card? :

  http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

  I hope this helps.

• "Share" feature in the Finder (or other applications) has stopped working.

  Use OS X El Capitan on a Mac Book Pro, the function in the Finder (or other applications) has stopped working "share."  From the Finder, I select a file and to 'Share', select say "Mail", nothing happens. Even when selecting other sharing options such as 'Notes', etc.  He used to work.  Now it is not.  In system preferences > Extensions all the sharing options are regularly controlled.  The same problem occurs in other applications such as Photos.  Selection of a photo and trying to "share."  Nothing happens, the application crashes. Does anyone have a solution?

  The Share button shows 'No. Service' or missing menu items?

  https://support.Apple.com/en-us/HT203129

  If this does not help, backup the computer and reinstall OS X El Capitan of OS X Recovery.

  https://support.Apple.com/en-us/HT204904

• The program executable has stopped working

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with... of programs a SSC downloaded for smpt installation
  • Error messages. the program executable has stopped working... a problem caused blocking the program works correctly. Windows will close the program and notify you if a solution is available
  • Recent changes to your computer. None
  • What you have already tried to fix the problem.no I don't know what to do

  Confirmed that the program is compatible with your version of Vista and the hardware in your computer? http://www.microsoft.com/windows/compatibility/windows-vista/.

  You can try to uninstall the program, download a clean copy (in case where the original has been altered) and re - install the new download and then see if the program works.  If this does not help, try right-clicking on the executable and click on run as administrator and see if that makes a difference.

  I hope this helps.  If this isn't the case, follow the advice implied by Malke response and contact technical support by the manufacturer of software for assistance.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• On Windows 8, some widgets, such as the menu near the upper right button, stop working after awhile, and restored by restarting the PC.

  I use the latest versions of Firefox as soon as they are available on a PC in Windows 8. Firefox works fine, usually a few hours before the annoying problems manifest. The problem, that I address here is some widgets, including some widgets Firefox and widgets (such as buttons and selectors menu drop down) isolated in some sites stop functioning. In Firefox, the Menu button (the icon of three dashes stacked) stops working. And the download arrow sometimes stops working too. Sometimes, sub-items as printed stop working. A pull-down, the high and arrow down keys could still work even if I might now be able to select with the mouse. Closing and re-opening Firefox usually restores some functionality. However, I usually have to restart the PC to restore all the functions that has stopped working. So I'm good for usually a few hours yet. Another inconvenience, which others have addressed, is the appearance of Chinese characters - to research on the tab toolbar labels at the top. Restart Firefox gets rid of these for the moment. Thanks for the study.

  Philipp,
  Thanks for the quick reply and for the advice that you have presented.
  I downloaded and installed the graphics driver that you recommended. The process went well. I have hardware acceleration disabled by an earlier recommendation to remove these Oriental characters.
  After two days of problem apparently having been fixed, I considered replying to report success. But before I could get around to doing so, abnormal behaviors reappeared. Thanks for confirming the source of these Oriental characters. Previous research indicates that the source was with McAfee or Firefox, a bit like a battle for "pointing the finger" in between.
  Best,
  JRSTOUDT

• Since the Firefox 27 update, close the tab cancel has stopped working.

  All the other features of restoration work as far as I can tell, and by disabling the only addon that should even remotely affect it (Tabmix Plus) does not solve the problem. I also tried to implement the correction suggested for this article (https://support.mozilla.org/en-US/questions/978286?esab=a & s = undo + close + tab + not + working & r = 0 & s = ACE) nothing works.

  No problem with https://addons.mozilla.org/en-US/firefox/addon/tab-mix-plus/versions/?page=1#version-0.4.1.3

  Maybe the problem is in the latest TabMixPlus

• I get the message "firefox has stopped working" after closing browser

  Hello.

  My problem is that when I close the FireFox browser, I get the message "FireFox has stopped working". It's pretty boring. I have read some other posts here that describes a similar problem and we tried some of the suggestions in them including:

  A clean install, a reset of the browser, running in safe mode, uncheck hardware acceleration, disabling Extensions and plugins one at a time, uninstall my antivirus (avast), backward to 23.01 and audit version run in compatibility mode that someone claims to be helped. None of this has been effective.

  It seems that after a reboot of the computer, the browser will be ok for 2-4 closures and then it will start by the message at each end. In addition, after uninstalling avast was good for 6 closures. Roll back also gave me approximately 6 free message closures. But then, the messages and does not stop.

  Is there anything else I can try? Thanks in advance for your suggestions.

  
  

• SyncUp software displays the message "SyncUp has stopped working".

  SyncUp software displays the message "SyncUp has stopped working" what can I do to fix this? Thank you

  Hello

  1. what operating system are you using on your computer?

  2. What is the brand and model of your computer?

  3. it worked very well on your system before? If Yes, you did it all software or hardware change before the show?

  Method 1

  I suggest to put the computer in a clean boot state and then try to open the program and check if it helps.

  Note When you perform a clean boot, you may temporarily lose some functionality. When you start the computer as usual, the function returns. However, you may receive the error message, or you can experience the original behavior.

  How to solve the problem by running the clean boot in Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: Once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

  Method 2

  Uninstall and reinstall the software SyncUp.

  Uninstall or change a program
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Note: Uninstalling the software will erase all the data associated with it. You must redo all favorite and set up anywhere after settings put it back.

  THIRD PARTY WARNING: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  See the following help link:

  http://en.community.Dell.com/support-forums/software-OS/f/3526/t/19391777.aspx

  It will be useful.

• What caused my DVD burner, to stop working

  OK, my main hard drive is SATA, if it is relevant to anyone who can help me that I don't know, but I'd rather just give too much information than not enough. I had to go and change my diet because he could not support my new DVD of LG Super Multi burner. Once I replaced it, it worked fine, I then a day later added a HDD IDE to put in shape, it did not work, I realized I should enable in my bios. I did, none of my devices would start and the computer would not go past the initial splash screen. I unplugged my hard drive and the computer starts correctly. now the hard drive does not work, I could care less because it's not as important to me as my NEW DVD burner. Also no power at all not going through my burner. I have plug into my diet and nothing happens. I fear he may have been fried somehow, but I don't know. I even tried other IDE cables on my power supply to power. nothing works! Please help me to find out why the * he decided to stop working completely. Thank you and excuse my language ^_^ didn't need to make the drive master/slave, like I said I don't like hard disk, he won. but the DVD burner is now completely insensitive. This is my problem, why she will not receive any power. It is a question, I want to do light, so keep in mind that I don't like hard disk, just my DVD ROM not working

  Hello

  I suggest you try to execute this fixit and see if it helps:
  http://support.Microsoft.com/kb/982116

  Also check out this link:
  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  It will be useful.

• I am trying to install a PC game. When the DVD and I click on install I get the message, setupexe has stopped working

  original title: setupexe has stopped working

  I am trying to install a PC game. When the DVD and I click on install I get the message, setupexe has stopped working, windows will find a response and advise. Nothing happens. What should I do to install the soul?

  Hello

  ·         The game you are trying to install?

  ·         You are able to install other programs?

  ·         The specification of the computer meets the requirements for the installation of this game?

  Step 1: Check if the game is compatible with Windows Vista.

  Windows Vista Compatibility Center: http://www.microsoft.com/windows/compatibility/windows-vista/default.aspx

  Step 2: Try to copy the contents of the DVD on the desktop. Then install the game.

• "CatalystControlCentre: the host application has stopped working".

  I get this message when I boot: ' CatalystControlCentre: the host application has stopped working. . Caused A problem blocking the program works correctly. Windows will close the program and notify you if a solution is available. " This happened after I got malware and have since sent to quarantine. A / the result is that the wallpaper is gone replaced by a black screen. Some of the icons on the screen and the line along the bottom disappeared. How can I fix it? What I have to find and pay a professional to do it, or can I fix it myself?

  Hi Eagle-B

  
  Did you put the virus in quarantine?

   

  It seems that you still have the virus or malware present on the computer. I suggest you to contact the team of experts on the issue. Also, you can visit the Microsoft security essentials forum for assistance for the number and check if that helps.

  http://social.answers.Microsoft.com/forums/en-us/msescan/threads?filter=answered

   

  I hope this helps.

• How to solve the questviewer.exe has stopped working windows 7

  How to solve the questviewer.exe has stopped working windows 7

  using the analysis

  http://www.Malwarebytes.org/

  Make sure your system is clean first. use ccleaner to get rid of junkfiles http://www.piriform.com/ccleaner/download

  Also look for viruses either using avast and spyware using superantispyware

  go to msconfig (type in the search box in startmenu or run in xp, and then press enter) then prepare your computer to clean boot by disabling all startup items and any of the services of windows, and then restart your computer. See if it makes a difference? If it did then you know who caused the problem.

  you will also need to know is that "questviewer.exe"? It belongs to a program? If the answer is Yes try to update or reinstall the program, but before that make sure that the program is not hamful to your pc.

• The brightness keys have stopped working

  the brightness keys have stopped working, with or without pressing the FN key

  Can you please tell us which model of laptop and operating system do you use? I assume you are using Win8 or Win8.1 right?

• The touchpad button LED stopped working on the satellite P series

  I run the ccleaner 2.17 in the logarithmic function has stopped working and led to the play, stop, rewind... "keys, between the two speakers.
  Can someone help me?

  Seems that the CCLeaner clean up some registry entries or values which are responsible for the functionality of the button Toshiba

  As Akuma says that you can reinstall the VAP to get this problem solved, but you can also set the operating system to the point of time at the beginning using the Windows System Restore tool.

  I think it would be a faster solution