DAC: tasks failed during the ETL for financial applications
I'm looking for my first ETL on OLIVIER 7.9.6.4
I use Oracle EBS 12.1.1 as source system.
the ETL full 200 + tasks successfully, but it fails for the rest of them
first task that fails is:
SDE_ORA_GL_AR_REV_LinkageInformation_Extract
Error message:
All the batch jobs
Lot of Informatica Session
------------------------------
INFORMATICA TASK: SDE_ORAR1211_Adaptor:SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full:1: (Source: COMPLETE target: FULL)
------------------------------
2013-09-03 14:57:14.627 acquisition of resources
2013-09-03 14:57:14.643 acquired resources
2013-09-03 14:57:14.658 INFORMATICA TASK: SDE_ORAR1211_Adaptor:SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full:1: (Source: COMPLETE target: FULL) began.
FAULT INFO: Error executing: INFORMATICA TASK: SDE_ORAR1211_Adaptor:SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full:1: (Source: COMPLETE target: FULL)
Message:
Fatal error
pmcmd startworkflow sv - infor_int d Domain_AMAZON-9C628AAE - u Linguiste2 Pei * f SDE_ORAR1211_Adaptor - paramfile C:\Informatica\server\infa_shared\SrcFiles\SDE_ORAR1211_Adaptor.SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full.ORA_R1211.txt SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full
Status / / Desc: failure
WorkFlowMessage:
Error message: unknown reason 36331 error code
Error code: 36331
EXCEPTION CLASS: com.siebel.analytics.etl.etltask.IrrecoverableException
com.siebel.analytics.etl.etltask.InformaticaTask.doExecute(InformaticaTask.java:254)
com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:477)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:372)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:253)
com.siebel.analytics.etl.etltask.GenericTaskImpl.run(GenericTaskImpl.java:655)
com.siebel.analytics.etl.taskmanager.XCallable.call(XCallable.java:63)
java.util.concurrent.FutureTask$ Sync.innerRun (unknown Source)
java.util.concurrent.FutureTask.run (unknown Source)
java.util.concurrent.Executors$ RunnableAdapter.call (unknown Source)
java.util.concurrent.FutureTask$ Sync.innerRun (unknown Source)
java.util.concurrent.FutureTask.run (unknown Source)
java.util.concurrent.ThreadPoolExecutor$ Worker.runTask (unknown Source)
java.util.concurrent.ThreadPoolExecutor$ Worker.run (unknown Source)
java.lang.Thread.run (unknown Source)
(Number of attempts: 1).
pmcmd startworkflow sv - infor_int d Domain_AMAZON-9C628AAE - u Linguiste2 Pei * f SDE_ORAR1211_Adaptor - paramfile C:\Informatica\server\infa_shared\SrcFiles\SDE_ORAR1211_Adaptor.SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full.ORA_R1211.txt SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full
2013-09-03 15:15:01.346 INFORMATICA TASK: SDE_ORAR1211_Adaptor:SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full:1: (Source: COMPLETE target: FULL) has finished running with the Failed state.
------------------------------
(Failed)
After that, many dependent tasks fail
log files of session at the "SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full_SESSIONS.log":
=====================================
STD OUTPUT
=====================================
Informatica (r) PMCMD, version [9.1.0 HotFix2], build [357.0903], 32-bit Windows
Copyright (c) Informatica Corporation 1994-2011
All rights reserved.
Called my Sep 03 15:14:24 2013
Connected to the Service of integration: [infor_int].
File: [SDE_ORAR1211_Adaptor]
Workflow: [SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full]
Instance: [SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full]
Mapping: [SDE_ORA_GL_AR_REV_LinkageInformation_Extract]
Session log file: [C:\Informatica\server\infa_shared\SessLogs\. SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full.ORA_R1211.log]
Success of the source lines: [0]
Source has no lines: [0]
Target lines of success: [0]
Target lines failed: [0]
Number of errors in transformation: [0]
First error code [4035]
First error message: [[error SQL RR_4035
ORA-00904: "XLA_EVENTS." "" UPG_BATCH_ID ": invalid identifier
Database driver error...
Function name: run
Stmt SQL: SELECT DISTINCT
DLINK. SOURCE_DISTRIBUTION_ID_NUM_1 DISTRIBUTION_ID,
DLINK. SOURCE_DISTRIBUTION_TYPE TABLE_SOURCE,
AELINE. ACCOUNTING_CLASS_CODE,
GLIMPREF. JE_HEADER_ID JE_HEADER_ID,
GLIMPREF. JE_LINE_NUM JE_LINE_NUM,
AELINE. AE_HEADER_ID AE_HEADER_ID,
AELINE. AE_LINE_NUM AE_LINE_NUM,
T.LEDGER_ID LEDGER_ID,
T.LEDGER_CATEGORY_CODE LEDGER_TYPE,
JBATCH.NAME BATCH_NAME,
JHEADER.NAME HOSTHEADERNAME,
BY. END_DATE,
AELINE. CODE_COMBINATI]
Task run status: [failure]
Integration service: [infor_int]
The integration of Service process: [infor_int]
Grid integration Service: [infor_int]
----------------------------
Name of node [node01_AMAZON-9C628AAE]
Fragment of preparation
Partition: #1 [Partition]
Instance of transformation: [SQ_XLA_AE_LINES]
Transformation: [SQ_XLA_AE_LINES]
Apply the lines: [0]
Number of rows affected: [0]
Rejected lines: [0]
Throughput(Rows/sec): [0]
Throughput(bytes/sec): [0]
Last [16004] error code, message [ERROR: prepare failed.: []]
ORA-00904: "XLA_EVENTS." "" UPG_BATCH_ID ": invalid identifier
Database driver error...
Function name: run
Stmt SQL: SELECT DISTINCT
DLINK. SOURCE_DISTRIBUTION_ID_NUM_1 DISTRIBUTION_ID,
DLINK. SOURCE_DISTRIBUTION_TYPE TABLE_SOURCE,
AELINE. ACCOUNTING_CLASS_CODE,
GLIMPREF. JE_HEADER_ID JE_HEADER_ID,
GLIMPREF. JE_LINE_NUM JE_LINE_NUM,
AELINE. AE_HEADER_ID AE_HEADER_ID,
AELINE. AE_LINE_NUM AE_LINE_NUM,
T.LEDGER_ID LEDGER_ID,
T.LEDGER_CATEGORY_CODE LEDGER_TYPE,
JBATCH.NAME BATCH_NAME,
JHEADER.NAME HOSTHEADERNAME,
BY. END_DATE,
AELINE. CODE_CO]
Departure time: [kills Sep 03 15:06:16 2013]
End time: [kills Sep 03 15:06:16 2013]
Partition: #1 [Partition]
Instance of transformation: [W_GL_LINKAGE_INFORMATION_GS]
Transformation: [W_GL_LINKAGE_INFORMATION_GS]
Apply the lines: [0]
Number of rows affected: [0]
Rejected lines: [0]
Throughput(Rows/sec): [0]
Throughput(bytes/sec): [0]
Last error code [0], message [no errors].
Departure time: [kills Sep 03 15:06:20 2013]
End time: [kills Sep 03 15:06:20 2013]
Disconnection of Service integration
Finished my Sep 03 15:14:59 2013
=====================================
ERROR OUTPUT
=====================================
the next task of fault is:
SDE_ORA_APTransactionFact_Payment_Full
Error log:
java.lang.Thread.run (unknown Source)
305 SEVERE kills Sep 03 11:19:43 GMT 2013 ask to start a workflow: "SDE_ORAR1211_Adaptor:SDE_ORA_APTransactionFact_Payment_Full with the name of the instance SDE_ORA_APTransactionFact_Payment_Full" finished with the error code 0
306 SEVERE kills Sep 03 11:20:16 GMT 2013 ask to start a workflow: "SDE_ORAR1211_Adaptor:SDE_ORA_APTransactionFact_PaymentSchedule_Full with the name of the instance SDE_ORA_APTransactionFact_PaymentSchedule_Full" finished with the error code 0
307 SEVERE kills Sep 03 11:20:18 GMT 2013 ask to start a workflow: "SDE_ORAR1211_Adaptor:SDE_ORA_APTransactionFact_Distributions_Full with the name of the instance SDE_ORA_APTransactionFact_Distributions_Full" finished with the error code 0
308 SEVERE kills Sep 03 11:20:24 GMT 2013 ask to start a workflow: "SDE_ORAR1211_Adaptor:SDE_ORA_Stage_ValueSetHier_Flatten with the name of the instance SDE_ORA_Stage_ValueSetHier_Flatten" finished with the error code 0
311 SEVERE kills Sep 03 11:22:14 GMT 2013 MESSAGE: no value for @DAC_SOURCE_PRUNED_REFRESH_TIMESTAMP available!
I searched online but can't find useful information about errors
could someone help, please?
Another question: can I continue the ETL when it fails? without starting from the beginning?
Hi Mate,
Simply delete the duplicate value, it is not a problem
Finally give the validation in your PB, make waiting in line and raise your execution plan...
I'm sure that this task is now complete.
It will be a great help on your side, if you share did you read me the article. and give me the number?
I am also looking for a validation script now.
Thank you
Guylain
mkashu.blogspot.com
Tags: Business Intelligence
Similar Questions
-
DAC: task failed during the ETL for financial applications
I'm looking for my first ETL on OLIVIER 7.9.6.4
I use Oracle EBS 12.1.1 as source system.
the ETL full 314 tasks successfully, but it fails at the task named:
'SDE_ORA_GL_AR_REV_LinkageInformation_Extract '.
DAC error log:
=====================================
STD OUTPUT
=====================================
Informatica (r) PMCMD, version [9.1.0 HotFix2], build [357.0903], 32-bit Windows
Copyright (c) Informatica Corporation 1994-2011
All rights reserved.
Called Wed Sep 18 09:46:41 2013
Connected to the Service of integration: [infor_int].
File: [SDE_ORAR1211_Adaptor]
Workflow: [SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full]
Instance: [SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full]
Mapping: [SDE_ORA_GL_AR_REV_LinkageInformation_Extract]
Session log file: [C:\Informatica\server\infa_shared\SessLogs\. SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full.ORA_R1211.log]
Success of the source lines: [0]
Source has no lines: [0]
Target lines of success: [0]
Target lines failed: [0]
Number of errors in transformation: [0]
First error code [4035]
First error message: [[error SQL RR_4035
ORA-00904: "XLA_EVENTS." "" UPG_BATCH_ID ": invalid identifier
Database driver error...
Function name: run
Stmt SQL: SELECT DISTINCT
DLINK. SOURCE_DISTRIBUTION_ID_NUM_1 DISTRIBUTION_ID,
DLINK. SOURCE_DISTRIBUTION_TYPE TABLE_SOURCE,
AELINE. ACCOUNTING_CLASS_CODE,
GLIMPREF. JE_HEADER_ID JE_HEADER_ID,
GLIMPREF. JE_LINE_NUM JE_LINE_NUM,
AELINE. AE_HEADER_ID AE_HEADER_ID,
AELINE. AE_LINE_NUM AE_LINE_NUM,
T.LEDGER_ID LEDGER_ID,
T.LEDGER_CATEGORY_CODE LEDGER_TYPE,
JBATCH.NAME BATCH_NAME,
JHEADER.NAME HOSTHEADERNAME,
BY. END_DATE,
AELINE. CODE_COMBINATI]
Task run status: [failure]
Integration service: [infor_int]
The integration of Service process: [infor_int]
Grid integration Service: [infor_int]
----------------------------
Name of node [node01_AMAZON-9C628AAE]
Fragment of preparation
Partition: #1 [Partition]
Instance of transformation: [SQ_XLA_AE_LINES]
Transformation: [SQ_XLA_AE_LINES]
Apply the lines: [0]
Number of rows affected: [0]
Rejected lines: [0]
Throughput(Rows/sec): [0]
Throughput(bytes/sec): [0]
Last [16004] error code, message [ERROR: prepare failed.: []]
ORA-00904: "XLA_EVENTS." "" UPG_BATCH_ID ": invalid identifier
Database driver error...
Function name: run
Stmt SQL: SELECT DISTINCT
DLINK. SOURCE_DISTRIBUTION_ID_NUM_1 DISTRIBUTION_ID,
DLINK. SOURCE_DISTRIBUTION_TYPE TABLE_SOURCE,
AELINE. ACCOUNTING_CLASS_CODE,
GLIMPREF. JE_HEADER_ID JE_HEADER_ID,
GLIMPREF. JE_LINE_NUM JE_LINE_NUM,
AELINE. AE_HEADER_ID AE_HEADER_ID,
AELINE. AE_LINE_NUM AE_LINE_NUM,
T.LEDGER_ID LEDGER_ID,
T.LEDGER_CATEGORY_CODE LEDGER_TYPE,
JBATCH.NAME BATCH_NAME,
JHEADER.NAME HOSTHEADERNAME,
BY. END_DATE,
AELINE. CODE_CO]
Departure time: [Sat Oct 18 09:46:13 2013]
End time: [Sat Oct 18 09:46:13 2013]
Partition: #1 [Partition]
Instance of transformation: [W_GL_LINKAGE_INFORMATION_GS]
Transformation: [W_GL_LINKAGE_INFORMATION_GS]
Apply the lines: [0]
Number of rows affected: [0]
Rejected lines: [0]
Throughput(Rows/sec): [0]
Throughput(bytes/sec): [0]
Last error code [0], message [no errors].
Departure time: [Sat Oct 18 09:46:14 2013]
End time: [Sat Oct 18 09:46:14 2013]
Disconnection of Service integration
Completed at Wed Sep 18 09:46:41 2013
-----------------------------------------------------------------------------------------------------
Informatica session log files:
DIRECTOR > VAR_27028 use override the value [DataWarehouse] session parameter: [$DBConnection_OLAP].
DIRECTOR > VAR_27028 use override the value [ORA_R1211] for the session parameter: [$DBConnection_OLTP].
DIRECTOR > VAR_27028 use override the value [.] SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full.ORA_R1211.log] for the session parameter: [$PMSessionLogFile].
DIRECTOR > VAR_27028 use override the [26] value for parameter mapping: [$DATASOURCE_NUM_ID].
DIRECTOR > VAR_27028 use override the value [' n '] parameter mapping: [$FILTER_BY_LEDGER_ID].
DIRECTOR > VAR_27028 use override the value [' n '] parameter mapping: [$FILTER_BY_LEDGER_TYPE].
DIRECTOR > VAR_27028 use override value for the parameter mapping]: [$$ Hint1].
DIRECTOR > override VAR_27028 use value [01/01/1970] parameter mapping: [$INITIAL_EXTRACT_DATE].
DIRECTOR > override VAR_27028 use value [01/01/1990] parameter mapping: [$LAST_EXTRACT_DATE].
DIRECTOR > VAR_27028 use override value [1] to parameter mapping: [$LEDGER_ID_LIST].
DIRECTOR > VAR_27028 use override the value ["NONE"] parameter mapping: [$LEDGER_TYPE_LIST].
DIRECTOR > session initialization of TM_6014 [SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full] at [Sat Oct 18 09:46:13 2013].
DIRECTOR > name of the repository TM_6683: [infor_rep]
DIRECTOR > TM_6684 server name: [infor_int]
DIRECTOR > TM_6686 folder: [SDE_ORAR1211_Adaptor]
DIRECTOR > Workflow TM_6685: [SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full] running Instance name: Id series []: [2130]
DIRECTOR > mapping TM_6101 name: SDE_ORA_GL_AR_REV_LinkageInformation_Extract [version 1].
DIRECTOR > TM_6963 pre 85 Timestamp compatibility is enabled
DIRECTOR > the TM_6964 Date of the Session format is [HH24:MI:SS DD/MM/YYYY]
DIRECTOR > TM_6827 [C:\Informatica\server\infa_shared\Storage] will be used as the storage of session directory [SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full].
DIRECTOR > cache CMN_1805 recovery is removed when running in normal mode.
DIRECTOR > CMN_1802 Session recovery cache initialization is complete.
DIRECTOR > configuration using [DisableDB2BulkMode, Yes] TM_6708 property
DIRECTOR > configuration using [OraDateToTimestamp, Yes] TM_6708 property
DIRECTOR > configuration using [overrideMpltVarWithMapVar Yes] TM_6708 property
DIRECTOR > TM_6708 using the configuration property [SiebelUnicodeDB, [APPS] @[54.225.65.108:1521:VIS] [DWH_REP2]@[AMAZON-9C628AAE:1521:obiaDW1]]
DIRECTOR > TM_6703 Session [SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full] is headed by [node01_AMAZON-9C628AAE], version [9.1.0 HotFix2] 32-bit integration Service, build [0903].
MANAGER > PETL_24058 Running score of the Group [1].
MANAGER > initialization of engine PETL_24000 of parallel Pipeline.
MANAGER > PETL_24001 parallel Pipeline engine running.
MANAGER > session initialization PETL_24003 running.
MAPPING > CMN_1569 Server Mode: [ASCII]
MAPPING > code page of the server CMN_1570: [MS Windows Latin 1 (ANSI), superset of Latin1]
MAPPING > TM_6151 the session to the sort order is [binary].
MAPPING > treatment of low accuracy using TM_6156.
MAPPING > retry TM_6180 blocking logic will not apply.
MAPPING > TM_6187 Session focused on the target validation interval is [10000].
MAPPING > TM_6307 DTM error log disabled.
MAPPING > TE_7022 TShmWriter: initialized
MAPPING > Transformation TE_7004 Parse WARNING [IIF (EVENT_TYPE_CODE = 'RECP_REVERSE',
IIF (UPG_BATCH_ID > 0,
SOURCE_TABLE | '~' || DISTRIBUTION_ID,
SOURCE_TABLE | ' ~ RECEIPTREVERSE ~' | DISTRIBUTION_ID),
SOURCE_TABLE | '~' || DISTRIBUTION_ID)
]; transformation continues...
MAPPING > TE_7004 processing Parse WARNING [< < PM Parse WARNING > > [|]: operand is converted to a string.
... IIF (EVENT_TYPE_CODE = 'RECP_REVERSE',
IIF (UPG_BATCH_ID > 0,
SOURCE_TABLE | '~' || > > > > DISTRIBUTION_ID < < < <.
SOURCE_TABLE | ' ~ RECEIPTREVERSE ~' | DISTRIBUTION_ID),
SOURCE_TABLE | '~' || DISTRIBUTION_ID)
< < WARNING PM Parse > > [|]: operand is converted to a string
... IIF (EVENT_TYPE_CODE = 'RECP_REVERSE',
IIF (UPG_BATCH_ID > 0,
SOURCE_TABLE | '~' || DISTRIBUTION_ID,
SOURCE_TABLE | ' ~ RECEIPTREVERSE ~' | (> > > > DISTRIBUTION_ID < < < <).
SOURCE_TABLE | '~' || DISTRIBUTION_ID)
< < WARNING PM Parse > > [|]: operand is converted to a string
... IIF (EVENT_TYPE_CODE = 'RECP_REVERSE',
IIF (UPG_BATCH_ID > 0,
SOURCE_TABLE | '~' || DISTRIBUTION_ID,
SOURCE_TABLE | ' ~ RECEIPTREVERSE ~' | DISTRIBUTION_ID),
SOURCE_TABLE | '~' || (> > > > DISTRIBUTION_ID < < < <)
]; transformation continues...
MAPPING > Transformation TE_7004 Parse WARNING [JE_HEADER_ID |] '~' || JE_LINE_NUM]; transformation continues...
MAPPING > TE_7004 processing Parse WARNING [< < PM Parse WARNING > > [|]: operand is converted to a string.
... > > > > JE_HEADER_ID < < < < | '~' || JE_LINE_NUM < < PM Parse WARNING > > [JE_LINE_NUM]: operand is converted to a string
... JE_HEADER_ID | '~' || [> > > > JE_LINE_NUM < < < <]; transformation continues...
MAPPING > Transformation TE_7004 Parse WARNING [AE_HEADER_ID |] '~' || AE_LINE_NUM]; transformation continues...
MAPPING > TE_7004 processing Parse WARNING [< < PM Parse WARNING > > [|]: operand is converted to a string.
... > > > > AE_HEADER_ID < < < < | '~' || AE_LINE_NUM < < PM Parse WARNING > > [AE_LINE_NUM]: operand is converted to a string
... AE_HEADER_ID | '~' || [> > > > AE_LINE_NUM < < < <]; transformation continues...
MAPPING > TM_6007 DTM initialized successfully for the session [SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full]
DIRECTOR > PETL_24033 all the DTM connection information: [< NO >].
MANAGER > PETL_24004 from the tasks before the session. : (My Sep 18 09:46:13 2013)
MANAGER > task PETL_24027 before the session completed successfully. : (My Sep 18 09:46:13 2013)
DIRECTOR > PETL_24006 from data movement.
MAPPING > Total TM_6660 Buffer Pool size is 12582912 bytes and block size is 128000 bytes.
READER_1_1_1 > DBG_21438 Reader: Source is [54.225.65.108:1521/VIS], [APPS] users
READER_1_1_1 > BLKR_16003 initialization completed successfully.
WRITER_1_ * _1 > WRT_8146 author: target is the database [AMAZON - 9C628AAE:1521 / obiaDW1], [DWH_REP2], loose [on] mode users
WRITER_1_ * _1 > WRT_8106 WARNING! Session Mode Bulk - recovery is not guaranteed.
WRITER_1_ * _1 > target WRT_8124 W_GL_LINKAGE_INFORMATION_GS of Table: SQL INSERT statement:
INSERT INTO W_GL_LINKAGE_INFORMATION_GS(SOURCE_DISTRIBUTION_ID,JOURNAL_LINE_INTEGRATION_ID,LEDGER_ID,LEDGER_TYPE,DISTRIBUTION_SOURCE,JE_BATCH_NAME,JE_HEADER_NAME,JE_LINE_NUM,POSTED_ON_DT,GL_ACCOUNT_ID,SLA_TRX_INTEGRATION_ID,DATASOURCE_NUM_ID) VALUES ( ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?)
WRITER_1_ * _1 > connection WRT_8270 #1 target group consists of target (s) [W_GL_LINKAGE_INFORMATION_GS]
WRITER_1_ * _1 > WRT_8003 writer initialization complete.
READER_1_1_1 > BLKR_16007 player run began.
READER_1_1_1 > RR_4029 SQ [SQ_XLA_AE_LINES] User Instance specified SQL query [SELECT DISTINCT
DLINK. SOURCE_DISTRIBUTION_ID_NUM_1 DISTRIBUTION_ID,
DLINK. SOURCE_DISTRIBUTION_TYPE TABLE_SOURCE,
AELINE. ACCOUNTING_CLASS_CODE,
GLIMPREF. JE_HEADER_ID JE_HEADER_ID,
GLIMPREF. JE_LINE_NUM JE_LINE_NUM,
AELINE. AE_HEADER_ID AE_HEADER_ID,
AELINE. AE_LINE_NUM AE_LINE_NUM,
T.LEDGER_ID LEDGER_ID,
T.LEDGER_CATEGORY_CODE LEDGER_TYPE,
JBATCH.NAME BATCH_NAME,
JHEADER.NAME HOSTHEADERNAME,
BY. END_DATE,
AELINE. CODE_COMBINATION_ID,
AEHEADER. EVENT_TYPE_CODE,
NVL (XLA_EVENTS. UPG_BATCH_ID, 0) UPG_BATCH_ID
DLINK XLA_DISTRIBUTION_LINKS
GL_IMPORT_REFERENCES GLIMPREF
XLA_AE_LINES AELINE
GL_JE_HEADERS JHEADER
GL_JE_BATCHES JBATCH
, GL_LEDGERS T
, GL_PERIODS BY
WHERE DLINK. SOURCE_DISTRIBUTION_TYPE IN
("AR_DISTRIBUTIONS_ALL"
"RA_CUST_TRX_LINE_GL_DIST_ALL")
AND DLINK. APPLICATION_ID = 222
AND AELINE. APPLICATION_ID = 222
AND AELINE.GL_SL_LINK_TABLE = GLIMPREF.GL_SL_LINK_TABLE
AND AELINE.GL_SL_LINK_ID = GLIMPREF.GL_SL_LINK_ID
AND AELINE. AE_HEADER_ID = DLINK. AE_HEADER_ID
AND AELINE. AE_LINE_NUM = DLINK. AE_LINE_NUM
AND GLIMPREF. JE_HEADER_ID = JHEADER. JE_HEADER_ID
AND JHEADER. JE_BATCH_ID = JBATCH. JE_BATCH_ID
AND JHEADER. LEDGER_ID = T.LEDGER_ID
AND JHEADER. STATUS = 'P'
AND T.PERIOD_SET_NAME = BY. PERIOD_SET_NAME
AND JHEADER. PERIOD_NAME = PER. PERIOD_NAME
AND JHEADER. CREATION_DATE > =.
TO_DATE (JANUARY 1, 1970 00:00:00 ')
"MM/DD/YYYY HH24:MI:SS")
AND DECODE (', 'Y', T.LEDGER_ID, 1) (1)
[AND DECODE (', 'Y', T.LEDGER_CATEGORY_CODE, 'NONE') ("NO")]
READER_1_1_1 > RR_4049 SQL query sent to the database: (Wed Sep 18 09:46:13 2013)
WRITER_1_ * _1 > WRT_8005 writer run began.
WRITER_1_ * _1 > WRT_8158
START SUPPORT SESSION *.
Startup load time: Fri Sep 18 09:46:13 2013
Target table:
W_GL_LINKAGE_INFORMATION_GS
READER_1_1_1 > CMN_1761 Timestamp event: [Thu Sep 18 09:46:13 2013]
READER_1_1_1 > RR_4035 SQL Error]
ORA-00904: "XLA_EVENTS." "" UPG_BATCH_ID ": invalid identifier
Database driver error...
Function name: run
Stmt SQL: SELECT DISTINCT
DLINK. SOURCE_DISTRIBUTION_ID_NUM_1 DISTRIBUTION_ID,
DLINK. SOURCE_DISTRIBUTION_TYPE TABLE_SOURCE,
AELINE. ACCOUNTING_CLASS_CODE,
GLIMPREF. JE_HEADER_ID JE_HEADER_ID,
GLIMPREF. JE_LINE_NUM JE_LINE_NUM,
AELINE. AE_HEADER_ID AE_HEADER_ID,
AELINE. AE_LINE_NUM AE_LINE_NUM,
T.LEDGER_ID LEDGER_ID,
T.LEDGER_CATEGORY_CODE LEDGER_TYPE,
JBATCH.NAME BATCH_NAME,
JHEADER.NAME HOSTHEADERNAME,
BY. END_DATE,
AELINE. CODE_COMBINATION_ID,
AEHEADER. EVENT_TYPE_CODE,
NVL (XLA_EVENTS. UPG_BATCH_ID, 0) UPG_BATCH_ID
DLINK XLA_DISTRIBUTION_LINKS
GL_IMPORT_REFERENCES GLIMPREF
XLA_AE_LINES AELINE
GL_JE_HEADERS JHEADER
GL_JE_BATCHES JBATCH
, GL_LEDGERS T
, GL_PERIODS BY
WHERE DLINK. SOURCE_DISTRIBUTION_TYPE IN
("AR_DISTRIBUTIONS_ALL"
"RA_CUST_TRX_LINE_GL_DIST_ALL")
AND DLINK. APPLICATION_ID = 222
AND AELINE. APPLICATION_ID = 222
AND AELINE.GL_SL_LINK_TABLE = GLIMPREF.GL_SL_LINK_TABLE
AND AELINE.GL_SL_LINK_ID = GLIMPREF.GL_SL_LINK_ID
AND AELINE. AE_HEADER_ID = DLINK. AE_HEADER_ID
AND AELINE. AE_LINE_NUM = DLINK. AE_LINE_NUM
AND GLIMPREF. JE_HEADER_ID = JHEADER. JE_HEADER_ID
AND JHEADER. JE_BATCH_ID = JBATCH. JE_BATCH_ID
AND JHEADER. LEDGER_ID = T.LEDGER_ID
AND JHEADER. STATUS = 'P'
AND T.PERIOD_SET_NAME = BY. PERIOD_SET_NAME
AND JHEADER. PERIOD_NAME = PER. PERIOD_NAME
AND JHEADER. CREATION_DATE > =.
TO_DATE (JANUARY 1, 1970 00:00:00 ')
"MM/DD/YYYY HH24:MI:SS")
AND DECODE (', 'Y', T.LEDGER_ID, 1) (1)
AND DECODE (', 'Y', T.LEDGER_CATEGORY_CODE, 'NONE') ('NONE')
Fatal error Oracle
Database driver error...
Function name: run
Stmt SQL: SELECT DISTINCT
DLINK. SOURCE_DISTRIBUTION_ID_NUM_1 DISTRIBUTION_ID,
DLINK. SOURCE_DISTRIBUTION_TYPE TABLE_SOURCE,
AELINE. ACCOUNTING_CLASS_CODE,
GLIMPREF. JE_HEADER_ID JE_HEADER_ID,
GLIMPREF. JE_LINE_NUM JE_LINE_NUM,
AELINE. AE_HEADER_ID AE_HEADER_ID,
AELINE. AE_LINE_NUM AE_LINE_NUM,
T.LEDGER_ID LEDGER_ID,
T.LEDGER_CATEGORY_CODE LEDGER_TYPE,
JBATCH.NAME BATCH_NAME,
JHEADER.NAME HOSTHEADERNAME,
BY. END_DATE,
AELINE. CODE_COMBINATION_ID,
AEHEADER. EVENT_TYPE_CODE,
NVL (XLA_EVENTS. UPG_BATCH_ID, 0) UPG_BATCH_ID
DLINK XLA_DISTRIBUTION_LINKS
GL_IMPORT_REFERENCES GLIMPREF
XLA_AE_LINES AELINE
GL_JE_HEADERS JHEADER
GL_JE_BATCHES JBATCH
, GL_LEDGERS T
, GL_PERIODS BY
WHERE DLINK. SOURCE_DISTRIBUTION_TYPE IN
("AR_DISTRIBUTIONS_ALL"
"RA_CUST_TRX_LINE_GL_DIST_ALL")
AND DLINK. APPLICATION_ID = 222
AND AELINE. APPLICATION_ID = 222
AND AELINE.GL_SL_LINK_TABLE = GLIMPREF.GL_SL_LINK_TABLE
AND AELINE.GL_SL_LINK_ID = GLIMPREF.GL_SL_LINK_ID
AND AELINE. AE_HEADER_ID = DLINK. AE_HEADER_ID
AND AELINE. AE_LINE_NUM = DLINK. AE_LINE_NUM
AND GLIMPREF. JE_HEADER_ID = JHEADER. JE_HEADER_ID
AND JHEADER. JE_BATCH_ID = JBATCH. JE_BATCH_ID
AND JHEADER. LEDGER_ID = T.LEDGER_ID
AND JHEADER. STATUS = 'P'
AND T.PERIOD_SET_NAME = BY. PERIOD_SET_NAME
AND JHEADER. PERIOD_NAME = PER. PERIOD_NAME
AND JHEADER. CREATION_DATE > =.
TO_DATE (JANUARY 1, 1970 00:00:00 ')
"MM/DD/YYYY HH24:MI:SS")
AND DECODE (', 'Y', T.LEDGER_ID, 1) (1)
AND DECODE (', 'Y', T.LEDGER_CATEGORY_CODE, 'NONE') ('NONE')
[Error fatal Oracle].
READER_1_1_1 > CMN_1761 Timestamp event: [Thu Sep 18 09:46:13 2013]
READER_1_1_1 > BLKR_16004 ERROR: prepare failed.
WRITER_1_ * _1 > WRT_8333 roll back all the targets due to the fatal error of session.
WRITER_1_ * _1 > rollback WRT_8325 Final, executed for the target [W_GL_LINKAGE_INFORMATION_GS] at end of load
WRITER_1_ * _1 > time full load WRT_8035: Sun Sep 18 09:46:13 2013
SUMMARY OF THE LOAD
============
WRT_8036 target: W_GL_LINKAGE_INFORMATION_GS (Instance name: [W_GL_LINKAGE_INFORMATION_GS])
WRT_8044 responsible for this target data no.
WRITER_1_ * _1 > WRT_8043 * END LOAD SESSION *.
MANAGER > PETL_24031
PERFORMANCE INFORMATION FOR TGT SUPPORT ORDER [1] GROUP, SIMULTANEOUS GAME [1] *.
Thread [READER_1_1_1] created [stage play] point score [SQ_XLA_AE_LINES] is complete. Running time total was enough for significant statistics.
[TRANSF_1_1_1] thread created for [the scene of transformation] partition has made to the point [SQ_XLA_AE_LINES]. Running time total was enough for significant statistics.
Thread [WRITER_1_ * _1] created for [the scene of writing] partition has made to the point [W_GL_LINKAGE_INFORMATION_GS]. Running time total was enough for significant statistics.
MANAGER > PETL_24005 from tasks after the session. : (My Sep 18 09:46:14 2013)
MANAGER > task of PETL_24029 after the session completed successfully. : (My Sep 18 09:46:14 2013)
MAPPING > TM_6018 the session completed with errors of processing row [0].
MANAGER > parallel PETL_24002 engine Pipeline completed.
DIRECTOR > Session PETL_24013 run duly filled with failure.
DIRECTOR > TM_6022
PLENARY OF THE LOAD
================================================
DIRECTOR > TM_6252 Source load summary.
DIRECTOR > Table CMN_1740: [SQ_XLA_AE_LINES] (name of the Instance: [SQ_XLA_AE_LINES])
Output [0] lines, affected lines [0], applied [0] lines, rejected lines [0]
DIRECTOR > TM_6253 Target Load summary.
DIRECTOR > Table CMN_1740: [W_GL_LINKAGE_INFORMATION_GS] (name of the Instance: [W_GL_LINKAGE_INFORMATION_GS])
Output [0] lines, affected lines [0], applied [0] lines, rejected lines [0]
DIRECTOR > TM_6023
===================================================
DIRECTOR > TM_6020 Session [SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full] to [Sat Oct 18 09:46:14 2013].
------------------------------------------------------------------------------------------------------------------------------------------------------------------
* I made a few requests in my source (Vision) database, table "XLA_EVENTS" exists, column "UPG_BATCH_ID" exists also
* I added 'XLA_EVENTS' to the FROM clause and he ran in SQL Developer
* in the SELECT clause, I see a column named 'AEHEADER. EVENT_TYPE_CODE ".but there is no table named 'AEHEADER' in the FROM clause
so I added it manually, it is without doubt makes reference to 'XLA_AE_HEADERS '.
The final request looks like this:
SELECT DISTINCT
DLINK. SOURCE_DISTRIBUTION_ID_NUM_1 DISTRIBUTION_ID,
DLINK. SOURCE_DISTRIBUTION_TYPE TABLE_SOURCE,
AELINE. ACCOUNTING_CLASS_CODE,
GLIMPREF. JE_HEADER_ID JE_HEADER_ID,
GLIMPREF. JE_LINE_NUM JE_LINE_NUM,
AELINE. AE_HEADER_ID AE_HEADER_ID,
AELINE. AE_LINE_NUM AE_LINE_NUM,
T.LEDGER_ID LEDGER_ID,
T.LEDGER_CATEGORY_CODE LEDGER_TYPE,
JBATCH.NAME BATCH_NAME,
JHEADER.NAME HOSTHEADERNAME,
BY. END_DATE,
AELINE. CODE_COMBINATION_ID,
AEHEADER. EVENT_TYPE_CODE,
NVL (XLA_EVENTS. UPG_BATCH_ID, 0) UPG_BATCH_ID
DLINK XLA_DISTRIBUTION_LINKS
GL_IMPORT_REFERENCES GLIMPREF
XLA_AE_LINES AELINE
GL_JE_HEADERS JHEADER
GL_JE_BATCHES JBATCH
, GL_LEDGERS T
, GL_PERIODS BY
XLA_AE_HEADERS AEHEADER
XLA_EVENTS
WHERE DLINK. SOURCE_DISTRIBUTION_TYPE IN
("AR_DISTRIBUTIONS_ALL"
"RA_CUST_TRX_LINE_GL_DIST_ALL")
AND DLINK. APPLICATION_ID = 222
AND AELINE. APPLICATION_ID = 222
AND AELINE.GL_SL_LINK_TABLE = GLIMPREF.GL_SL_LINK_TABLE
AND AELINE.GL_SL_LINK_ID = GLIMPREF.GL_SL_LINK_ID
AND AELINE. AE_HEADER_ID = DLINK. AE_HEADER_ID
AND AELINE. AE_LINE_NUM = DLINK. AE_LINE_NUM
AND GLIMPREF. JE_HEADER_ID = JHEADER. JE_HEADER_ID
AND JHEADER. JE_BATCH_ID = JBATCH. JE_BATCH_ID
AND JHEADER. LEDGER_ID = T.LEDGER_ID
AND JHEADER. STATUS = 'P'
AND T.PERIOD_SET_NAME = BY. PERIOD_SET_NAME
AND JHEADER. PERIOD_NAME = PER. PERIOD_NAME
AND JHEADER. CREATION_DATE > =.
TO_DATE (JANUARY 1, 1970 00:00:00 ')
"MM/DD/YYYY HH24:MI:SS")
AND DECODE (', 'Y', T.LEDGER_ID, 1) (1)
AND DECODE (', 'Y', T.LEDGER_CATEGORY_CODE, 'NONE') ('NONE')
* When I run this query, it takes a lot of run time without return no result (it took 4 hours to cancel it, I got the last time)
my questions are:
-What is the problem with this query?-How can I change the query in the workflow?
could someone please help?
Check if the session is reusable or non-reusable. If his re-usable, so you may need to modify the sql query in the window of the tasks
-
DAC Task detailed and the workflow does not... But the task completed DAC
Team
Need help on this issue... I ran an incremental ETL today and the other of the "Sub" task failed in the DAC but the task is marked duly filled and DAC Plan completed successfully. When I check the level of the task details, it shows that a task fails... and also the corresponding workflow failed in Workflow Monitor... For the side safer, I deleted the task of the DAC and recreated, re assembled the area in question and re build the plan of the... but still the same issue.
Please guide me where to look for the problem of communication between the TASK of the DAC and DAC 'TASK DETAILS.
Thank youHello
We had the same problem. The parameters--> System DAC 'Tests' properties field must be "False".
I hope this helps.
Thank you
S -
Hello
first of all, thank you for providing tools such as vCenter Converter for free.
I tried to convert a physical machine to Windows 7 using the current vCenter Converter Standalone (version = 4.3.0 build = build-292238). The target of the conversion is an external USB disk. I am to convert the entire machine, including a disc of about 280 GB in size.
The conversion takes more than 24 hours, but seems to work quite well. Right after training is converted (to about 98% of the whole process), the conversion fails during the reconfiguration with the following error message:
Unexpected exception: converter.fault.FileCreationFault
-ERROR - convert: converter.fault.FileCreationFault
{(converter.fault.FileCreationFault)
dynamicType = < unset >
faultCause = (vmodl. NULL in MethodFault),
file ="
.\vstor2-mntapi10-shared-468030AD0004C435020000000A000000\Windows\$reconfig$ «»MSG = ""
}
There is no other message log of the recent in the converter - server.log. The converter - worker.log says:
from reconfiguring the system...
using temp dir C:\Windows\TEMP\vmware-temp\vmware-SYSTEM\sysReconfig
ReconfigurationTransaction: cached reviews system volume
LocalPathToGuestSystemFolder:
.\vstor2-mntapi10-shared-468030AD0004C435020000000A000000\Windows\LocalUndoFolder:
.\vstor2-mntapi10-shared-468030AD0004C435020000000A000000\Windows\$reconfig$Cleaning up the C:\Windows\TEMP\vmware-temp\vmware-SYSTEM\sysReconfig temp directory...
TaskImpl failed with MethodFault::Exception: converter.fault.FileCreationFault
Scheduled timer cancelled, succeeds StopKeepAlive
InternalTask2VmomiTaskAdapter updates, States: 4, percentage: 0, xfer rate (Bps): < unknown >
BaseParserImpl::Parse Config info is not cached
F:\VM\wartberg\wartberg.vmx analysis
NIC has no info support, unable to determine connectionType
NIC has no info support, unable to determine connectionType
NIC has no info support, unable to determine connectionType
NIC has no info support, unable to determine connectionType
NIC has no info support, unable to determine connectionType
NIC has no info support, unable to determine connectionType
Registry hive
. \vstor2-mntapi10-shared-468030AD0004C435020000000C000000
Boot\BCD is responsible under the name mntApi397493888030118019Error 13 read the value of the element of key mntApi397493888030118019\Objects\ {9dea862c-5cdd-4e70-acc1-f32b344d4795} \Elements\24000001
MntApi397493888030118019 hive unloaded
Registry hive
.\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SOFTWARE is charged under the name mntApi3984454896301180192 error reading value CSDVersion key mntApi398445489630118019\Microsoft\Windows NT\CurrentVersion
2 error reading information SP
CurrentType key is multiprocessor free
2 error reading CurrentType mntApi398445489630118019\Wow6432Node\Microsoft\Windows NT\CurrentVersion key value
2 error reading 64 bits of information, probably not a 64-bit system
the product name is Windows 7 Home Premium
Registry hive
.\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SYSTEM is charged under the name mntApi404763500730118019Error reading the mntApi404763500730118019\ControlSet001\Services\vmxnet - 2.
Error 2 vmxnet information, assuming that vmxnet is not installed
MntApi404763500730118019 hive unloaded
MntApi398445489630118019 hive unloaded
Registry hive
.\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SYSTEM is charged under the name mntApi406994304730118019MntApi406994304730118019 hive unloaded
Registry hive
.\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SOFTWARE is charged under the name mntApi4192247261301180192 error reading value CSDVersion key mntApi419224726130118019\Microsoft\Windows NT\CurrentVersion
2 error reading information SP
CurrentType key is multiprocessor free
2 error reading CurrentType mntApi419224726130118019\Wow6432Node\Microsoft\Windows NT\CurrentVersion key value
2 error reading 64 bits of information, probably not a 64-bit system
the product name is Windows 7 Home Premium
Registry hive
.\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SYSTEM is charged under the name mntApi425417937030118019Error reading the mntApi425417937030118019\ControlSet001\Services\vmxnet - 2.
Error 2 vmxnet information, assuming that vmxnet is not installed
MntApi425417937030118019 hive unloaded
MntApi419224726130118019 hive unloaded
Registry hive
.\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SYSTEM is charged under the name mntApi427773541230118019MntApi427773541230118019 hive unloaded
Failed to get the volume mount points 640 (03 = * 00 > 7000000000000: 4146 (type = 2, code = 259))
VMOUNT library: 1450 error communication error with the pilot while
Error 1016 (hive to load error: unknown error 1016 (0x3f8) (1016)) temporary hive loading
.\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SOFTWARE under the name of the mntApi367215230118020 key.Unable to load the registry hive
.\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SOFTWARE, error 0x3f8.Error 16258 when you open the software hive
Failed to get the volume mount points 640 (03 = * 5320000000:00404, 16258 (type = 2, code = 1016))
MNTAPI Info OS: Microsoft Windows 7 Home Premium edition: root of home: Windows Service Pack: worm 0: 6.1
OS resides on the disk partition 2 F:\VM\wartberg\wartberg.vmdk path
BaseComputerImpl::Open configuration file: F:\VM\wartberg\wartberg.vmx
WorkerConvertTask: production bundle task agent for task with id = 'task 3 '.
bundle of newspaper http://Converter.Agent.DiagnosticManagerImpl[task-3] Generating task.
http://Converter.agent.DiagnosticManagerImpl creation bundle of newspaper "task-3 - qfyxaphl.zip ' and size '11155" CRC "1600250029."
http://Converter.agent.DiagnosticManagerImpl adjusted bundle of newspaper "task-3 - qfyxaphl.zip ' and size '11155" CRC "1600250029."
WorkerConvertTask: recovery agent special newspaper bundle to "C:\Windows\TEMP\vmware-temp\vmware-SYSTEM\agentTask-task-3-geckipbm.zip".
http://Converter.agent.DiagnosticManagerImpl recovery bundle of newspaper with key ' task-3 - qfyxaphl.zip "at offset = '0' and max size ="11155.
WorkerConvertTask: Bundle successfully retrieved from "C:\Windows\TEMP\vmware-temp\vmware-SYSTEM\agentTask-task-3-geckipbm.zip"
Scheduled timer cancelled, succeeds StopKeepAlive
bundle of newspaper http://Converter.Worker.DiagnosticManagerImpl[task 1] Generating task.
As the conversion took more than 24 hours, I would be happy to learn how to avoid this problem or even how to save the VM already created (I don't know if this is possible, but at least the virtual machine appears to be underway, but then crashes saying that a required device is not present).
Any help is appreciated!
Thank you
nepper
OK - I'll upload versions changed in maybe 15 minutes
muss weg kurz
_________________________
VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual
-
Photoshop elements 12 fails during the installation of the shared technologies.
I have the same problem as all these people. Yes, I tried all these things, yes I followed all the links and scoured the internet:
http://forums.Adobe.com/message/5914286
http://forums.Adobe.com/message/5909390#5909390
http://forums.Adobe.com/message/5904696#5904696
Elements of 12 install fails during the installation of Adobe Organizer. No indication of problems in the newspapers, just fails and rolls back. Near as I can tell that people at adobe don't know what is the real problem, they have only a long series of very complicated and obscure tricks that _might_ "solve" the problem. I tried all in all imaginable combinations and still can not get 12 items to install. I installed win7 vanilla stock, plain, applied patches, tried to install it and it always fails.
I repeat. This facility has failed me in the same way on a box own win7.
Any software that still requires one of these measures of hack to install must be sent to the shop for more tests. I mentioned to try all these things and more!
Copy the installer to the root of c:
Delete this folder or what
Make a new admin account and install with
Edit the registry
Disable services in msconfig
Install in safe mode
What would be more useful for me now would be either 1) a patch to correct this error of critical installation or 2) explicit explanation from Adobe on what the real problem is so I can fix it myself.
I'm a little upset, sorry for the tone. It is the worst single installation experience that I have ever met.
Hi Jeff,
To follow up, I got an adobeconnect session today with a very competent and friendly adobe technology. It seems that we have solved the problem. There was some kind of problem with air and/or bridge do not store their files updated, not 100% on the part so don't quote me, he said. He said the challenge is to completely uninstall anything adobe and start from scratch. The other option is a bit of hackers, but it works for me and saves me the trouble to completely redo the installation. To track here are the steps to achieve this work, ymmv:
-Go through the Adobe Premiere elements 12 install the process up to the point where the shared components installation crashes. Do not click OK.
-To start the task (ctrl + alt + delete) Manager
-Go to the pane and kill msiexec.exe * 32 process, the adobe Installer must die.
-Remove the Adobe Premiere elements 12 link that is created on the desktop. Do not use this link, it points to the Welcome screen and crashes.
-Also delete C:\Program Files\Adobe\Adobe first Elements, Premiere Elements 12\Adobe 12.exe, for the same reason as above.
-L'exe that works is in this same directory called "Adobe first Elements.exe", he does not attend the Welcome screen and it doesn't seem to work.
-Now it takes Adobe Application Manager to run, and we just killed the installer, so go to catch it:
http://www.Adobe.com/appsmanager
-You don't even have to actually run, just download and install and you're good (if you are not running it she updates to Adobe Creative cloud that is unknown to the consequences).
-Now start Adobe first Elements.exe and connect your adobe ID
-ftw, should be good to go.
I tried this on 3 different machines. The installer beat identical overall and this procedure has got it to work. NB - Organizer apparently still is not installed, but that doesn't bother me. Don't know if this will have an impact long term operations.
Thanks for your help, this doesn't seem to work for me now.
-isaac
-
Qosmio G20 failed during the installation of SP3, now bluescreens on startup!
Qosmio G20 failed during the installation of SP3, now bluescreens on startup!
Any suggestions?
I can't restore to a date prior to the node without danger, he keeps failing?
Please help me...Hello
Have you tried booting with the CD of Microsoft WXP facilities and try to fix it?
Sorry, but I don't see any other solution.A few months ago, I got a blue screen after installing the new software. I tried to do the same with the safe mode and system restore, but it has not t worked for me.
At the end I backed up all my important data and installed new WXP. -
New installation fails during the expansion of the files Windows 7 Pro
Recently, I built a new computer after my old man died. I installed Windows 7 Pro, I had on the old system. Everything worked well for about a month. Then I started having various errors, some suggesting a memory error. I ran several times using the most comprehensive parameters of memtest and no problem not found. Further inspection, I discovered that a critical system update was applied just before that the problems started. I decided to roll back the change. It does not solve the problem. I tried to do a system repair. That did not work. She only had basic as IE11 and Skype applications. I had also installed the utilities for the motherboard and graphics card. So, I decided to do a clean install. Each time, it fails during the expansion of the files. The error message is, "Windows cannot install required files. The file may be corrupted or missing. Make sure all files required for installation are available, and restart the installation. "Error code: 0 x 80070570." He gets up to 30% each time. I tried to install for a V300 Kingston SSD (120GB). I also tried another SATA II HDD (750 GB) with the same problems. I downloaded a new ISO and tried to install from that. Yet once, it is not at the same point. I noticed that whenever it creates a partition system reserved 100 MB which is almost full. At one point, I got a message saying that there are about 8 000 MB of free space. (I think that was all trying to manually unzip the files by a tip I found online). I found several suggestions for similar problems, but the solutions proposed did not help. I'm sure it will be a simple solution, but I'm out of ideas. Any help would be appreciated.
Motherboard: MSI MPower MaxCPU: Intel i7 - 4770 K 3.5 GHz (not overclocked)RAM: Crucial Ballistix Sport 16G (2x8G) DDR3 - 1600 MHzSSD: Kingston SSDNow V300 Series 120 GB (no special driver needed)HARD drive: Seagate 750 G 7200 RPM SATA IIVideo: EVGA GeForce GT 2 640 GBCase: Corsair 400RPower supply: Corsair TX650MCPU cooler: H80iDVD: HP, BluRay BD R/W driveOS: Windows 7 Professional 64-bit upgrade (the old computer was an XP update)CPU Temp is around 42 C.If Memtest86 fails then you need to get into the BIOS and set the RAM timing. Memtest86 + displays the calendar then use the value displayed and compare to the real specs for your memory. Also, you may need to increase the voltage to the RAM (in BIOS) place a small amount.
As regards the function of Intel EIST, let her enabled for now. Then enable it after installing Windows successfully.
=============================================================
It's the set of test utilities that I use on every new system that I'm building.
Note: If you are OverClocking or use an automatic overclocking or BIOS power saving features, start by disabling: Intel EIST, Turbo Mode, Cool and pretty and fall back to the speed of stock as a starting point.
Disconnect any other (additional) internal hard drives and external USB devices.
Look for any loose hard drive power or cables SATA, graphics card or other power cables.First run Memtest86 +:
It runs from a floppy disk or CD and should eliminate or confirm if one or more of your memory
sticks are bad or the values of the SPD in the BIOS are correct.
Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), so no errors at that time then your ram is OK.
http://www.memtest.org/
Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
http://www.overclockers.com/forums/showthread.php?t=409152Hard drive test:
If you do not know your readers of the brand and model, try "Speccy",.
It provides information from the computer/system in detail:
OS, CPU, RAM, motherboard, graphics, Hard Drive, optical, Audio, peripherals, network.
Note: Option RAM indicates number of slots, DRAM Timing.
Works your memory speed (frequency). The nominal frequency of your memory.
http://www.Piriform.com/SpeccyTest your player - create a Bootable CD:
Ranging from 5 to 25% (depending on the make and model) new hard disks are defective.
Note: Reliability of HDD sank medium over the past 18 months.Test your drive with the car manufacture utility.
If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools
(bootable CD) and check bad sectors.
SeaTools for information: http://www.seagate.com/support/downloads/seatools/
SeaTools for Windows download: http://www.seagate.com/support/internal-hard-drives/enterprise-hard-drives/saturn/seatools-win-master/
SeaTools for DOS download:
http://www.Seagate.com/support/internal-hard-drives/consumer-electronics/LD25-series/SeaTools-DOS-master/For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en
Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htmHitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
Diagnostic tool available for use by customers who believe that having a brand Toshiba Fujitsu hard drive:
http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilitiesNotice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/
Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic============================ SSD Test Software =============================
Intel® drive SSD Toolbox
https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=18455Life of the SSD: http://ssd-life.com/
OCZ Toolbox: http://ocz.com/consumer/download/firmware
SanDisk SSD Toolkit: http://kb.sandisk.com/app/answers/detail/a_id/9328/
= Once Windows installed =.
Device drivers: have you installed latest drivers from device of the manufacture of the motherboard?
Check their support site for the latest drivers as the CD that came with the computer
or motherboard may be older and less stable drivers.Visit the download of the manufacture of the graphics card:
Download and install the most recent Windows 7 or 8 drivers for your card.
ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
NVIDIA: http://www.nvidia.com/Download/index.aspx?lang=en-usSee also the test of 'Smoke box' Nvidia or other demos: http://www.nvidia.com/object/cool_stuff.html#/demos
or equivalent ATI.Prime 95:
http://www.Mersenne.org/freesoft/
It's a stand alone .exe file contained in an archive .zip.
Simply choose to run the 'stress test' option for 8 hours or more.
If your PC can pass this test, your memory and CPU
are very good (close the housing cover in order to maintain adequate ventilation)Core Temp:
The temperature of each core of the processor.
Note: For the overclockers using stock radiator and cooling fan Intel/AMD you can expect
a range of 35 to 40 at idle and 60 to 65 C max temperature when running Prime95.
http://www.alcpu.com/CoreTemp/CPU-ID (CPUZ): http://www.cpuid.com/cpuz.php
Watch the clock speed of the CPU under various conditions of loading
(when using speed step technology Intel EIST).
#1 Note:
CPU - ID has two tabs - tab 'Memory' that shows the actual speed of the memory
and the "SPD" tab shows the nominal speeds for each memory location that is filled.
#2 Note:
COMPARE the two values, the actual speed of the memory must not exceed the rated speed of your memory.CPUID HWMonitor: Hardware program that reads the sensors of health main PC monitoring systems.
voltages, temperatures, fans speed.
http://www.CPUID.com/HWMonitor.phpTest of Stress of FurMark GPU (graphics card):
http://www.oZone3D.NET/benchmarks/fur/Pass marks burn in test: http://www.passmark.com/
Burnin test, and their test bench at the same time give a good workout from all the major parts of Windows.HD Tune:
Provides information of the car and has an option (tab scan error) to test your drive.
http://www.hdtune.com/CrystalDiskInfo:
http://CrystalMark.info/software/index-e.html
User Manual: http://crystalmark.info/software/CrystalDiskInfo/manual-en/
Monitoring the State of health and the temperature. Solid State Drives brackets (value of the software).SpeedFan:
Monitors internal temperatures and has a function of analysis health online (SMART tab) for hard disks drive.
It displays your drives model number and compares your drive with other discs of the same brand and model.
Note: Unfortunately now includes a lot of bloatware, be very careful when installing remove bloatware.
http://www.almico.com/SpeedFan.phpGPU - Z:
A utility light, designed for you give information about your video card and GPU.
http://www.techpowerup.com/GPUZ/PC WIZARD:
A powerful utility designed especially for detection of hardware, also analyses more.
He is able to identify a large scale of system components and supports the latest technologies
and standards.
http://www.CPUID.com/pcwizard.phpJ W Stuart: http://www.pagestart.com
-
Original title: Windows 7 system restore always fail.
I get error code 0 x 80070005 that reads "system restore failed during the restoration of the registry since the restore point. I don't have Norton AntiVirus.
If anyone can help solve me this problem I would be very grateful.
Thank you for your response. I forgot to mention in my first post, I tried both methods without success. However, I finally understand how to solve the problem that led me to want to do a restore of the system in the first place. for now, I am therefore able to avoid a system restore.
Thanks again.
-
Satellite A300 power suddenly goes out during the race for hours
Dear users of the Forum,
I am facing a strange problem in operation.
My laptop Satellite A300 is suddenly down power during the race for hours.
It is auto off not exactly. Not the way windows stop, is rather like strength to off (as when I press on & power button to stop force).This happens automatically, starting again, the screen saying "windows does not stop properly, start windows normally" is apperanig.
I suspected virus infection, I tried full scan with nod 32, essential microsoft, kaspesky - 1 by 1 (previous uninstall and install the new), but all the antivirus intremediately scan stopped due to this power off.
Watch movie also stopped in the Middle, attempted to convert the movie file format also was arrested several times because of this problem of automatic disconnection.
I tried to run only on the power (remove battery) and got the same result.
can anyone identify the problem? can you please give me the solution?
smarjit1
Hello
I put t think it is s virus.
En me it looks like overheating. Eventually the high internal temperature requires the laptop to close. This is done automatically to prevent the equipment from damage
I'm not quite sure what could cause this exactly, but in most cases the dust inside the fans affects cooling performance and lead to a temperature higher than m.Higher temperatures could affect the RAM modules too, and perhaps that is the reason why some applications don't work properly.
What to say; try to clean the cooling fans using a jet of compressed air and check out how the laptop would proceed
-
* Original title: 513 CAPI2 event
Hello. We receive an error in the Event Viewer indicating event 513, CAPI2 that contains:
Cryptographic services failed during the processing of the OnIdentity() call in the System Writer object.Details:
TraverseDir: Impossible to push the subdirectory.System error:
Unspecified errorHere are the details:
-
-
513
0
2
0
0
0 x 80000000000000
1039076
Application
KFI - SBS.kfi.local
-
Details: TraverseDir: impossible to push the subdirectory. System error: unspecified error
We did most of the procedures here as well as the patch that has not worked since our server is a Windows Server 2008 SP2. What else can be done so that we can solve the problem of System Writer. Thank you.
Hello
Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
See you soon.
-
ODI-1228: SrcSet0 (load) task fails on the target of ORACLE EBS_ connection
Hello
I'm integrating bulk data from one database to another DB, when I run the data in another DB all the success, but I am unable to see the result in another DB.so I checked in the operation tab I can see some belligerents message here.
warnning:
ODI-1228: SrcSet0 (load) task fails on the connection target ORACLE EBS_Customers.
Caused by: java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
someone please you suggest on this.
Kind regards
AnilHello
There is really little detail, but if you work on eBS I suspect you're pointing the synonymous or something similar.
Go to step "Create table of work." What do you see? Get the name and try will refuse this table exists
Let us know
-
Test installation of the elements fails during the installation of shared technology
Have tried to install the trial of 10 items on a XP Pro and a Win7 Pro PC and have the same problem.
Test installation fails during the installation of shared Technologies, and then restores the installation of the elements Organizer.
Someone at - he seen this before? Any ideas?
This Adobe document lists installation troubleshooting steps, including the 'Shared Technologies' error:
http://kb2.Adobe.com/CPS/858/cpsid_85843.html
Ken
-
If I have the first generation iWatch I'll be able to get the update for new applications and look at faces? I know that I couldn't display or the waterproof function to the water.
Hello
The next operating system update, watch OS 3, will be available for all Apple Watch models, including the first generation watches.
We should go out on 13 September, after which it can be installed by following the steps detailed here:
More information:
-
priority of the Internet for each application
priority of the Internet/network for each application as between ie8, firefox and a download manager like utorrent, igetter, orbit downloader
Hi, Thibaut,.
There are some non-Microsoft programs, you can download from the Internet and use them to set the priority for each application.
Note: Using non-Microsoft program is at your own risk.
For more information on the definition of priority network, see the following article:
See How to change the binding order of the network in Windows XP cardsVisit our Microsoft answers feedback Forum and let us know what you think.
-
Modify the .pro for my application
Hello
I would like to modify the .pro for my application, so the links to different libraries depending on whether it's a simulator, device, release or debug build. How do I do that? I can't find any docs.
Thank you.
not my area of expertise, but a quick glance in my .pro file provides:
key word/Device Simulator to discern, then CONFIG (release) for example to check the build.
source of my file:
simulator { CONFIG(release, debug|release) { DESTDIR = o } CONFIG(debug, debug|release) { DESTDIR = o-g } }
Maybe you are looking for
-
Hello I've had this printer for years & were able to print my envelopes in Word without problem. Today, I tried to print an envelope without result. The printer keeps giving me (type and paper size is incorrect). I have not won the printer & reinstal
-
How can you make records open or preview when plane of the mouse on them?
I would like to find a way to create a folder, in particular on the desktop, that would popup or show somehow its content just with the mouse hover to say a second or something. Something similar to how the start menu can transform files to the righ
-
Hello I am new to Cisco ASA (7.2) that we use also as a FIREWALL/NAT. We have following netwrok (see attached diagram). We have just added new dmz with 10.x.x.35/24. We have our comprosie of internal network with an IP public IP & some private (10.x.
-
Symbol of the Smartphone App World blackBerry home screen
I have an App World Day symbol showing on my blackberry but when I check in my App World there is no update. How can I get rid of the symbol?
-
Does anyone know how to set the background image on a Web site for does not scroll with the page?