Daily schedule scans for Windows Defender.
I planned my Windows Defender ACCT to do daily, a full scan, at 05:00. However, I just got a notice that a comprehensive analysis was made for the last 5 days! Why is this happening? Thank you.
1. Click Start, type taskschd.msc and press to enter.
2. click on continue in the UAC prompt.
3. in the right pane, click view, and click Show hidden tasks to check it out. (See screenshot below step 7)
4. in the left pane, click the arrow on the Task Scheduler Library folder and the folder of Microsoft to develop.
5. click on the folder of Windows Defender.
6. in the middle pane, right-click on the MP scheduled Scan list and click Properties.
7. click on the settings tab.
8. check the 'run task as soon as possible after a regular departure is missed box."
NOTE: This will allow Windows Defender perform the scheduled scan the next time you have the computer if the scan is not respected because she is not able to run at the scheduled time.
9. click on the OK button.
10. Close Task Scheduler window.
For more information on "Use Windows Defender" check this help link on windows: http://windows.microsoft.com/en-US/windows-vista/Using-Windows-Defender
Syed
Answers from Microsoft supports the engineer.
Tags: Windows
Similar Questions
-
Hi, windows 7 Disk Defragmenter problems daily schedule set for all discs, never happens, it sometimes takes weeks. Have a disk busy on the farm that is used for the storage of video surveillance. When I realize the performance issues, I check and find tht 'daily' Setup for MS disk defragmentation is not in fact run every day. I am watching silent movies and waiting for a 500 GB drive to effectively defragment, pass it is on average 1 percent per minute (with any other IO goes on the disc and app collection closed).
There must be (I hope) a flag I can put to Disk Defragmenter to be more aggressive in its analysis.
It is Windows 7 64 bit running on AMD processors, disks are sATA plugged in, although there is also a matrix RAID PCI Promise, it's usually when I started Hello I/O on the Board of 2 TB or utilization of the 'C', I realize the lack of defragmentation. I recall, before the SP1 under WIN 7, he ran on a daily basis, in fact, rather than an API algorith "guess".
System is in place 24 x 7 (I turn off the monitor at the time of sunset), there is no "powersaver" feature used on this particular device. I edited my original question because after many years of support, I realized, by asking the initial question, that I was not providing information that I would be asked a customer, if I was still doing this job.
Kind regards
Lorin Boyack
Hello Lorin,
There are several reasons why the built-in Defragmenter may not work correctly:
Method 1: He is also a malware on the system. Solution: Run an anti-virus control and also a spyware check.
I suggest you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.
The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
Important: During the scan of the hard drive if bad sectors are found, the scanner tries to repair this sector, all available on which data may be lost.
Method 2: The disk is too full (you need at least 15% free space, sometimes 20%). Solution: Delete files unnecessary and programs until you have more than 20% free space.
Delete files using disk cleanup
http://Windows.Microsoft.com/en-us/Windows7/delete-files-using-disk-cleanup
Method 3: The disc is damaged and must be repaired. Solution:
a. open "Computer" and right-click on the drive that you want to disable frag.
b. Select 'Properties' and click on 'tools '.
c. Select "Check now" to check the drive for errors.
d. Select the two options and click on 'start '.
Check your hard drive for errors
http://Windows.Microsoft.com/en-us/Windows7/check-your-hard-disk-for-errors
Important: While running chkdsk (check disk) hard disk, if bad sectors are found on the hard drive when chkdsk attempts to repair this sector, the data available in this area may be lost, and it is not recoverable.
(This can take time and can restart the PC so that it can do the check at boot time. Be patient and let it complete).
Method 4: Disk Defragmenter may be corrupted, requiring a system restore to fix.
System restore
http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore
NOTE: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.
Method 5: There are other programs that are running this interruption, the built-in Defragmenter. Solution:
a. close all running programs.
b. If you think there may be some programs that run in the background.
c. press Ctrl + Alt + Delete and
d. Select "start Task Manager".
e. under the 'Applications' tab, you will find a list of all running applications - you can close these by selecting "end task."
Hope this information helps. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.
-
Shortcut on the desktop for Windows Defender
Hello. I have Windows 7 starter on my netbook and want to create a shortcut on the desktop for Windows Defender. However, it does not appear as a program in the start menu and the option to display the control panel more big or small icons is greyed out (i.e., not available in starter edition), I don't see the program on the control panel or the other. The only way I can get to it is to type in 'Defender' in the search field in the start menu or the search field on the control panel. Although one of these actions will locate Windows Defender, they do not provide me the ability to create a shortcut for the application. I tried searching in Program Files on the C drive and found him, but did not know which file right-click on the folder to create a shortcut file. If anyone can help me, I would appreciate it.
Second, Windows Defender is updated analysis scheduled around 02:00 every morning, but my computer isn't on then, I expect to do a scan automatically the next day when I turned the computer back on. He did not do that and always displays the last analysis as being the manual I did the day before. Is it possible to get auto-start if it misses its slot 02,00 regular?
Thank you very much.
Hello
Thank you both for responding: I did click right and do drag the thing like that seemed simpler and it worked: thank you. Are you able to let me know how to get the Defender to make an auto scan when I turn on the computer if it misses its slot 02,00?
Thank you.
-
Cannot run AVG scan after scan of Windows Defender.
Original title: avg free and defender
When I click on my AVG program, that he will not give me an option of computer detection and he did earlier before I did a quick scan with windows defender.
Did somehow disable the AVG when I ran defender scan?
How can I find scan option in AVG again?
And how do I know that it really works? It shows nothing be picked up in the history.
Daughter to the game... Thanks for any help.
I suspect that this update (and many others) is unable to install due to a hijackware infection.
See my response to your subject in the Vista Security forum: http://social.answers.microsoft.com/Forums/en-US/vistasecurity/thread/0d907188-a441-4372-8ff0-323e4c7c4e5b/
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Cannot plan the virus scan in Windows Defender (Win8) in the settings tab / advanced. Please notify
Hello!
Please tell us how I can program a weekly virus scan in Windows Defender on my laptop of Win8. I can do in MSE on my Win7 laptop!Plan it in Task Scheduler. Hope this helps and if you need any additional aid station and we will be happy to help you
The above opinion is mine and mine nothing and does not necessarily reflect that of Microsoft, it's employees, or any other Member of the forum.
"When we try to take anything by itself, we find it hitched to everything else in the universe."-John Muir
-
Update for Windows Defender KB915597 definition
I have a laptop HP Vista 32 bit and I noticed KB915597 to stay herself sleep although I have update set to inform me and have me install myself install. 02/05 to 05/14 years, I have nineteen 19 automatic updates installed. My question is why is happening also whenever they are installed my computer slows down considerably.
I already told you why you all these listed KB915597 updates: they are all updated to sequential definition for Windows Defender, but these updates have nothing to do with your computer "[slow]."
Your problem with one, two or three of the following:
1. "remnants" of your previous install of Norton Internet Security and McAfee Security Center (the previous freebie from Comcast);
2. your Trend Micro subscription (or trial) have expired before installing Norton Internet Security; or...
3. a hijackware infection.
-Online NOTE: If the freebie from Comcast Norton Security Suite (which is only "powered by Norton 360 technologies" but not a free version of Norton 360) were installed & working properly, Windows Defender would be disabled and not up to date itself!
To solve the #1 (only), contact Norton/Comcast support via chat (http://www.norton.com/comcast_chat) or by "call 1-877-272-7149 to speak with a technician from Norton live."
To solve the #2, #3 or #1 and #2 and #3:
Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows. Please note that a repair installation (upgrade AKA on-site) will NOT fix it!
HOW to do a clean install of Vista: section "If you want to reinstall Windows Vista by running a new installation...". "of http://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista
Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:
4 steps to help protect your new computer before going online
http://www.Microsoft.com/security/pypc.aspxTip: After getting the computer fully patched, download/install KB971029 manually: http://support.microsoft.com/kb/971029
NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the appropriate removal tool before installing updates, Service Packs, Windows or the IE upgrades and before installing your new anti-virus application.
Norton Removal Tool
FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exeMcAfee Consumer product removal tool
http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exeIf you need help with the above, my colleagues in this forum can help you: http://social.answers.microsoft.com/Forums/en-US/vistarepair/threads
If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.
Good luck!
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Since I installed the updated definition for windows defender-KB915597(Definition 1.21.1279.0) 03/03/09, I was not able to install the new updates. I don't know why, but none of the updates I have been install, or at least try, are installation and saying "Success" next to them. I've used different methods to dispose of everything, if I have any, virus and still have not seen any progress. And unfortunately, I deleted all my restore points to keep the memory on my laptop. I have too many errors, report them all, but some of the things I did to check to ensure that I have no viruses do analyses of the complete system and remove a mysterious software they gave me an alert by (using McAfee Security). Any help will be considered. Help, please! :(
If you install the hidden recovery partition to do the cleaning, you will probably not the product key. Otherwise, use one on the sticker attached to the computer. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Error 80070670 installing KB915597 (definitions for Windows Defender)
Original title: Windows Defender
My windows was just trying to download an update to Windows Defender 80070670 KB915597 1.139.1240 definition. It is the first time that has happened. Is this serious.
Can I download the new update? How can I download this update?My operating system is Windows Vista HomePremium 32 Bit and my browser, IE9.
Thank you.
Jerry.
HI Milton,
Thank you for writing to Microsoft Communities. From your problem description, I understand that you would like to know if it is safe to download Windows Defender updates. Please correct me that I misunderstood.Do you have any other antivirus on your computer?Yes, it's absolutely perfect, if you download and install the latest updates for Windows Defender. Updates to Windows that are available to you are intended to improve the performance of the operating system, add new features and keep the computer up to date.If you use Windows Defender on the computer as a security software, it is recommended to keep it updated as this will improve the performance of Windows Defender to secure the operating system against viruses and Trojans.Method 1:Run the patch from the following link and check the status of the question...The problem with Microsoft Windows Update is not workingMethod 2:
You can download and install the update for Windows Defender definition through Windows updates, or else you can manually download and install the same using the link below.How to manually download the latest definitions for Windows Defender updates
http://support.Microsoft.com/kb/923159Description of the Windows Defender definition updates
http://support.Microsoft.com/kb/915597As you mentioned that you receive error 80070670 when installing the definitions for Windows Defender, I suggest to try the steps in the following link and check if it helps.How to troubleshoot Windows Defender definition updatehttp://support.Microsoft.com/kb/918355
Note: You may have to disable the antivirus installed on the computer software. (Any third-party antivirus software)Antivirus warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.Please follow the advice given and navigate the sites mentioned and let us know the result. We will be happy to help you. -
When I scan for Windows Vista Service Pack update (published 4/2009) comes in,
I redid my computer a few months ago restore to factory settings and restore my files from a backup disk. Everything seemed to work properly. A few weeks ago a full scan found a worm & some virus which I removed. Now, I have a problem with the updates. When I scan for Windows Vista Service Pack update (published 4/2009) arrives. When I click to install it, it is saying it is correctly installed (in 30 seconds) and yet he continues to come when I'm scanning for updates. Should I restore settings again? After looking for info on the forums of windows, I did the System File Checker to check corrupt files. Several corrupted files appear in the details of the SFC. But their fixation is "over my head". I glued the SFC details below. Any help would be appreciated. Thank you
2012-09-04 11:51:44, info CSI 00000006 [SR] components check 100 (0 x 00000064)
2012-09-04 11:51:44, transaction Info CSI 00000007 [SR] beginning verify and repair
2012-09-04 11:51:47, info CSI 00000009 [SR] full audit
2012-09-04 11:51:48, CSI of information 0000000 components [SR] a check 100 (0 x 00000064)
2012-09-04 11:51:48, CSI Info 0000000b transaction [SR] beginning verify and repair
2012-09-04 11:51:53, CSI to 0000000 d [SR] full audit information
2012-09-04 11:51:53, CSI 0000000e Info [SR] components check 100 (0 x 00000064)
2012-09-04 11:51:53, CSI Info 0000000f transaction [SR] beginning verify and repair
2012-09-04 11:51:55, info CSI 00000011 [SR] full audit
2012-09-04 11:51:56, info CSI 00000012 [SR] components check 100 (0 x 00000064)
2012-09-04 11:51:56, transaction Info CSI 00000013 [SR] beginning verify and repair
2012-09-04 11:51:57, info CSI 00000015 [SR] full audit
2012-09-04 11:51:57, info CSI 00000016 [SR] components check 100 (0 x 00000064)
2012-09-04 11:51:57, Info CSI 00000017 [SR] beginning verify and repair
2012-09-04 11:51:59, info CSI 00000019 [SR] full audit
2012-09-04 11:51:59, CSI Info 0000001 components [SR] a check 100 (0 x 00000064)
2012-09-04 11:51:59, CSI Info 0000001 b transaction [SR] beginning verify and repair
2012-09-04 11:52:01, CSI Info 0000001 d [SR] full audit
2012-09-04 11:52:01, 0000001e Info [SR] CSI components check 100 (0 x 00000064)
2012-09-04 11:52:01, CSI Info 0000001f transaction [SR] beginning verify and repair
2012-09-04 11:52:03, info CSI 00000021 [SR] full audit
2012-09-04 11:52:03, info CSI 00000022 [SR] components check 100 (0 x 00000064)
2012-09-04 11:52:03, transaction Info CSI 00000023 [SR] beginning verify and repair
2012-09-04 11:52:04, info CSI 00000025 [SR] full audit
2012-09-04 11:52:05, info CSI 00000026 [SR] components check 100 (0 x 00000064)
2012-09-04 11:52:05, the transaction Info CSI 00000027 [SR] beginning verify and repair
2012-09-04 11:52:06, info CSI 00000029 [SR] full audit
2012-09-04 11:52:07, CSI Info 0000002 components [SR] a check 100 (0 x 00000064)
2012-09-04 11:52:07, CSI Info 0000002b transaction [SR] beginning verify and repair
2012-09-04 11:52:09, info CSI 0000002d [SR] full audit
2012-09-04 11:52:09, CSI [SR] 0000002e Info components check 100 (0 x 00000064)
2012-09-04 11:52:09, CSI Info 0000002f transaction [SR] beginning verify and repair
2012-09-04 11:52:11, info CSI 00000031 [SR] full audit
2012-09-04 11:52:12, info CSI 00000032 [SR] components check 100 (0 x 00000064)
2012-09-04 11:52:12, transaction Info CSI 00000033 [SR] beginning verify and repair
2012-09-04 11:52:13, info CSI 00000035 [SR] full audit
2012-09-04 11:52:14, info CSI 00000036 [SR] components check 100 (0 x 00000064)
2012-09-04 11:52:14, transaction Info CSI 00000037 [SR] beginning verify and repair
2012-09-04 11:52:15, Info CSI 00000039 [SR] check complete
2012-09-04 11:52:16, CSI Info 0000003 components [SR] a check 100 (0 x 00000064)
2012-09-04 11:52:16, CSI Info 0000003b transaction [SR] beginning verify and repair
2012-09-04 11:52:19, info CSI 0000003d [SR] full audit
2012-09-04 11:52:19, CSI 0000003e [SR] Info components check 100 (0 x 00000064)
2012-09-04 11:52:19, CSI Info 0000003f transaction [SR] beginning verify and repair
2012-09-04 11:52:24, info CSI 00000041 [SR] full audit
2012-09-04 11:52:24, info CSI 00000042 [SR] components check 100 (0 x 00000064)
2012-09-04 11:52:24, transaction Info CSI 00000043 [SR] beginning verify and repair
2012-09-04 11:52:29, info CSI 00000046 [SR] full audit
2012-09-04 11:52:29, info CSI 00000047 [SR] components check 100 (0 x 00000064)
2012-09-04 11:52:29, transaction Info CSI 00000048 [SR] beginning verify and repair
2012-09-04 11:52:33, CSI Info 0000004a Verify [SR] full
2012-09-04 11:52:34, CSI Info 0000004 components [SR] b check 100 (0 x 00000064)
2012-09-04 11:52:34, CSI Info 0000004 c [SR] beginning verify and repair operation
2012-09-04 11:52:37, CSI 0000004f [SR] Verify Info full
2012-09-04 11:52:38, info CSI 00000050 [SR] components check 100 (0 x 00000064)
2012-09-04 11:52:38, Info CSI 00000051 [SR] beginning verify and repair
2012-09-04 11:52:43, info CSI 00000053 [SR] full audit
2012-09-04 11:52:43, info CSI 00000054 [SR] components check 100 (0 x 00000064)
2012-09-04 11:52:43, transaction Info CSI 00000055 [SR] beginning verify and repair
2012-09-04 11:52:51, CSI 0000005f [SR] Verify Info full
2012-09-04 11:52:51, info CSI 00000060 [SR] components check 100 (0 x 00000064)
2012-09-04 11:52:51, transaction Info CSI 00000061 [SR] beginning verify and repair
2012-09-04 11:52:55, info CSI 00000063 [SR] full audit
2012-09-04 11:52:56, info CSI 00000064 [SR] components check 100 (0 x 00000064)
2012-09-04 11:52:56, transaction Info CSI 00000065 [SR] beginning verify and repair
2012-09-04 11:53, info CSI 00000067 [SR] full audit
2012-09-04 11:53, info CSI 00000068 [SR] components check 100 (0 x 00000064)
2012-09-04 11:53, transaction Info CSI 00000069 [SR] beginning verify and repair
2012-09-04 11:53:05, CSI Info 0000006b Verify [SR] full
2012-09-04 11:53:06, components of CSI Info 0000006 c [SR] 100 audit (0 x 00000064)
2012-09-04 11:53:06, CSI Info 0000006 d [SR] beginning verify and repair transaction
2012-09-04 11:53:14, CSI Info 0000006f Verify [SR] full
2012-09-04 11:53:15, info CSI 00000070 [SR] components check 100 (0 x 00000064)
2012-09-04 11:53:15, transaction Info CSI 00000071 [SR] beginning verify and repair
2012-09-04 11:53:24, Info CSI 00000075 [SR] check complete
2012-09-04 11:53:24, info CSI 00000076 [SR] components check 100 (0 x 00000064)
2012-09-04 11:53:24, transaction Info CSI 00000077 [SR] beginning verify and repair
2012-09-04 11:53:38, info CSI 00000079 [SR] full audit
2012-09-04 11:53:38, CSI Info 0000007 components [SR] a check 100 (0 x 00000064)
2012-09-04 11:53:38, CSI Info 0000007 b transaction [SR] beginning verify and repair
2012-09-04 11:53:52, CSI Info 0000007 d [SR] full audit
2012-09-04 11:53:52, CSI 0000007e Info [SR] components check 100 (0 x 00000064)
2012-09-04 11:53:52, CSI Info 0000007f transaction [SR] beginning verify and repair
2012-09-04 11:53:55, info CSI 00000081 [SR] full audit
2012-09-04 11:53:55, info CSI 00000082 [SR] components check 100 (0 x 00000064)
2012-09-04 11:53:55, transaction Info CSI 00000083 [SR] beginning verify and repair
2012-09-04 11:53:57, info CSI 00000085 [SR] full audit
2012-09-04 11:53:57, info CSI 00000086 [SR] components check 100 (0 x 00000064)
2012-09-04 11:53:57, Info CSI 00000087 [SR] beginning verify and repair
2012-09-04 11:53:59, info CSI 00000089 [SR] full audit
2012-09-04 11:53:59, CSI Info 0000008 components [SR] a check 100 (0 x 00000064)
2012-09-04 11:53:59, CSI Info 0000008b transaction [SR] beginning verify and repair
2012-09-04 11:54:09, 000000 a 9 CSI Info [SR] verification complete
2012-09-04 11:54:10, 000000aa CSI Info [SR] components check 100 (0 x 00000064)
2012-09-04 11:54:10, CSI Info 000000ab transaction [SR] beginning verify and repair
2012-09-04 11:54:11, 000000ad CSI Info [SR] verification complete
2012-09-04 11:54:11, 000000ae CSI Info [SR] components check 100 (0 x 00000064)
2012-09-04 11:54:11, 000000af CSI Info transaction [SR] beginning verify and repair
2012-09-04 11:54:14, 000000 b 1 CSI Info [SR] verification complete
2012-09-04 11:54:15, 000000 b 2 CSI Info [SR] components check 100 (0 x 00000064)
2012-09-04 11:54:15, 000000 b 3 CSI Info transaction [SR] beginning verify and repair
2012-09-04 11:54:19, 000000 b 5 CSI Info [SR] verification complete
2012-09-04 11:54:19, 000000 b 6 CSI Info [SR] components check 100 (0 x 00000064)
2012-09-04 11:54:19, 000000 b 7 CSI Info transaction [SR] beginning verify and repair
2012-09-04 11:54:26, 000000 b 9 CSI Info [SR] verification complete
2012-09-04 11:54:27, 000000ba CSI Info [SR] components check 100 (0 x 00000064)
2012-09-04 11:54:27, 000000bb CSI Info transaction [SR] beginning verify and repair
2012-09-04 11:54:32, 000000bd CSI Info [SR] verification complete
2012-09-04 11:54:32, 000000be CSI Info [SR] components check 100 (0 x 00000064)
2012-09-04 11:54:32, CSI Info 000000bf transaction [SR] beginning verify and repair
2012-09-04 11:54:38, CSI Info 000000 c 1 [SR] full check
2012-09-04 11:54:38, CSI Info 000000 c 2 [SR] components check 100 (0 x 00000064)
2012-09-04 11:54:38, CSI Info 000000 c 3 [SR] beginning operation check and repair
2012-09-04 11:54:42, CSI Info 000000 c 5 [SR] full check
2012-09-04 11:54:42, CSI 000000C6 [SR] components Info check 100 (0 x 00000064)
2012-09-04 11:54:42, CSI Info 000000 c 7 [SR] beginning operation check and repair
2012-09-04 11:54:46, CSI Info 000000 c 9 [SR] full check
2012-09-04 11:54:47, 000000 CSI Info [SR] this component check 100 (0 x 00000064)
2012-09-04 11:54:47, CSI Info 000000cb transaction [SR] beginning verify and repair
2012-09-04 11:54:57, CSI Info 000000dc Verify [SR] full
2012-09-04 11:54:57, Info CSI [SR] 000000dd components check 100 (0 x 00000064)
2012-09-04 11:54:57, CSI Info 000000de transaction [SR] beginning verify and repair
2012-09-04 11:55:08, 000000f4 CSI Info [SR] verification complete
2012-09-04 11:55:09, 000000f5 CSI Info [SR] components check 100 (0 x 00000064)
2012-09-04 11:55:09, CSI Info 000000f6 transaction [SR] beginning verify and repair
2012-09-04 11:55:30, 000000f8 CSI Info [SR] verification complete
2012-09-04 11:55:31, 000000f9 CSI Info [SR] components check 100 (0 x 00000064)
2012-09-04 11:55:31, 000000fa CSI Info transaction [SR] beginning verify and repair
2012-09-04 11:55:42, CSI Info 000000 fc [SR] full audit
2012-09-04 11:55:42, 000000fd CSI Info [SR] components check 100 (0 x 00000064)
2012-09-04 11:55:42, CSI Info 000000fe transaction [SR] beginning verify and repair
2012-09-04 11:55:55, info CSI 00000100 [SR] full audit
2012-09-04 11:55:55, info CSI 00000101 [SR] components check 100 (0 x 00000064)
2012-09-04 11:55:55, transaction Info CSI 00000102 [SR] beginning verify and repair
2012-09-04 11:55:57, info CSI 00000104 [SR] cannot repair the military record [l:20 {10}] "tcpmon.ini" Microsoft-Windows-printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6000.16386, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
2012-09-04 11:56:01, info CSI 00000106 [SR] cannot repair the military record [l:20 {10}] "tcpmon.ini" Microsoft-Windows-printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6000.16386, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
2012-09-04 11:56:01, info CSI 00000107 [SR] this element is referenced by [ml:38 {19}, l:36 {18}] "Windows Foundation.
2012-09-04 11:56:01, CSI Info 0000010a [SR] could not reproject corrupted file [ml:520 {260}, l:46 {23}] '------? \C:\Windows\System32"\[l:20{10}]"TCPMon.ini '; source file in the store is also corrupted
2012-09-04 11:56:01, CSI Info 0000010 c [SR] full audit
2012-09-04 11:56:01, components of CSI Info 0000010 d [SR] 100 audit (0 x 00000064)
2012-09-04 11:56:01, Info CSI 0000010e transaction [SR] beginning verify and repair
2012-09-04 11:56:06, info CSI 00000110 [SR] full audit
2012-09-04 11:56:06, info CSI 00000111 [SR] components check 100 (0 x 00000064)
2012-09-04 11:56:06, transaction Info CSI 00000112 [SR] beginning verify and repair
2012-09-04 11:56:11, info CSI 00000115 [SR] full audit
2012-09-04 11:56:11, info CSI 00000116 [SR] components check 100 (0 x 00000064)
2012-09-04 11:56:11, transaction Info CSI 00000117 [SR] beginning verify and repair
2012-09-04 11:56:24, Info CSI 00000119 [SR] check complete
2012-09-04 11:56:24, CSI Info 0000011 components [SR] a check 100 (0 x 00000064)
2012-09-04 11:56:24, CSI Info 0000011b transaction [SR] beginning verify and repair
2012-09-04 11:56:31, CSI Info 0000011 d [SR] full audit
2012-09-04 11:56:31, CSI 0000011e [SR] Info components check 100 (0 x 00000064)
2012-09-04 11:56:31, CSI Info 0000011f transaction [SR] beginning verify and repair
2012-09-04 11:56:38, info CSI 00000121 [SR] full audit
2012-09-04 11:56:39, 00000122 CSI info [SR] components check 100 (0 x 00000064)
2012-09-04 11:56:39, transaction Info CSI 00000123 [SR] beginning verify and repair
2012-09-04 11:56:45, info CSI 00000125 [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6000.16615, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
2012-09-04 11:56:49, info CSI 00000127 [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6000.16615, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
2012-09-04 11:56:49, info CSI 00000128 [SR] this element is referenced by [l:160 {80}] "' Package_37_for_KB943411 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.5.943411 - 110_RTM_neutral_GDR" "
2012-09-04 11:56:49, CSI Info 0000012b [SR] could not reproject corrupted file [ml:520 {260}, l:72 {36}] '------? "\C:\Program Files\Windows Sidebar"------[l:24 {12}] "settings.ini"; source file in the store is also corrupted
2012-09-04 11:56:50, info CSI 0000012d [SR] full audit
2012-09-04 11:56:50, CSI 0000012e [SR] Info components check 100 (0 x 00000064)
2012-09-04 11:56:50, CSI Info 0000012f transaction [SR] beginning verify and repair
2012-09-04 11:56:56, info CSI 00000131 [SR] full audit
2012-09-04 11:56:56, info CSI 00000132 [SR] components check 100 (0 x 00000064)
2012-09-04 11:56:56, transaction Info CSI 00000133 [SR] beginning verify and repair
2012-09-04 11:57:05, info CSI 00000135 [SR] full audit
2012-09-04 11:57:06, info CSI 00000136 [SR] components check 100 (0 x 00000064)
2012-09-04 11:57:06, transaction Info CSI 00000137 [SR] beginning verify and repair
2012-09-04 11:57:18, CSI Info 0000013a Verify [SR] full
2012-09-04 11:57:18, CSI Info 0000013 components [SR] b check 100 (0 x 00000064)
2012-09-04 11:57:18, CSI Info 0000013 c [SR] beginning verify and repair operation
2012-09-04 11:57:22, Info CSI 0000013e [SR] full Verify
2012-09-04 11:57:23, CSI 0000013f [SR] components Info check 100 (0 x 00000064)
2012-09-04 11:57:23, transaction Info 00000140 CSI [SR] beginning verify and repair
2012-09-04 11:57:29, info CSI 00000142 [SR] full audit
2012-09-04 11:57:29, info CSI 00000143 [SR] components check 100 (0 x 00000064)
2012-09-04 11:57:29, transaction Info CSI 00000144 [SR] beginning verify and repair
2012-09-04 11:57:34, Info CSI 00000146 [SR] full check
2012-09-04 11:57:34, Info CSI 00000147 [SR] components check 100 (0 x 00000064)
2012-09-04 11:57:34, transaction Info CSI 00000148 [SR] beginning verify and repair
2012-09-04 11:57:42, CSI Info 0000014a Verify [SR] full
2012-09-04 11:57:42, CSI Info 0000014 components [SR] b check 100 (0 x 00000064)
2012-09-04 11:57:42, CSI Info 0000014 c [SR] beginning verify and repair operation
2012-09-04 11:57:51, Info CSI 0000014e [SR] full Verify
2012-09-04 11:57:51, CSI 0000014f [SR] components Info check 100 (0 x 00000064)
2012-09-04 11:57:51, transaction Info CSI 00000150 [SR] beginning verify and repair
2012-09-04 11:57:55, info CSI 00000152 [SR] full audit
2012-09-04 11:57:55, info CSI 00000153 [SR] components check 100 (0 x 00000064)
2012-09-04 11:57:55, transaction Info CSI 00000154 [SR] beginning verify and repair
2012-09-04 11:58, info CSI 00000156 [SR] full audit
2012-09-04 11:58:01, info CSI 00000157 [SR] components check 100 (0 x 00000064)
2012-09-04 11:58:01, Info CSI 00000158 [SR] beginning verify and repair
2012-09-04 11:58:05, CSI Info 0000015a Verify [SR] full
2012-09-04 11:58:05, CSI Info 0000015 components [SR] b check 100 (0 x 00000064)
2012-09-04 11:58:05, CSI Info 0000015 c [SR] beginning verify and repair operation
2012-09-04 11:58:10, Info CSI 0000015e [SR] full Verify
2012-09-04 11:58:11, CSI 0000015f [SR] components Info check 100 (0 x 00000064)
2012-09-04 11:58:11, transaction Info CSI 00000160 [SR] beginning verify and repair
2012-09-04 11:58:16, Info CSI 00000162 [SR] check complete
2012-09-04 11:58:17, info CSI 00000163 [SR] components check 100 (0 x 00000064)
2012-09-04 11:58:17, transaction Info CSI 00000164 [SR] beginning verify and repair
2012-09-04 11:58:20, Info CSI 00000166 [SR] check complete
2012-09-04 11:58:20, 00000167 CSI info [SR] components check 100 (0 x 00000064)
2012-09-04 11:58:20, transaction Info CSI 00000168 [SR] beginning verify and repair
2012-09-04 11:58:24, CSI Info 0000016a Verify [SR] full
2012-09-04 11:58:25, CSI Info 0000016b [SR] audit 92 (0x0000005c) components
2012-09-04 11:58:25, CSI Info 0000016 c [SR] beginning verify and repair operation
2012-09-04 11:58:31, Info CSI 0000016e [SR] full Verify
2012-09-04 11:58:31, CSI 0000016f [SR] repair 2 Info components
2012-09-04 11:58:31, transaction Info CSI 00000170 [SR] beginning verify and repair
2012-09-04 11:58:31, info CSI 00000172 [SR] cannot repair the military record [l:20 {10}] "tcpmon.ini" Microsoft-Windows-printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6000.16386, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
2012-09-04 11:58:31, info CSI 00000174 [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6000.16615, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
2012-09-04 11:58:31, info CSI 00000176 [SR] cannot repair the military record [l:20 {10}] "tcpmon.ini" Microsoft-Windows-printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6000.16386, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
2012-09-04 11:58:31, Info CSI 00000177 [SR] this element is referenced by [ml:38 {19}, l:36 {18}] "Windows Foundation.
2012-09-04 11:58:31, CSI Info 0000017a [SR] could not reproject corrupted file [ml:520 {260}, l:46 {23}] '------? \C:\Windows\System32"\[l:20{10}]"TCPMon.ini '; source file in the store is also corrupted
2012-09-04 11:58:31, CSI Info 0000017 c [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6000.16615, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
2012-09-04 11:58:31, CSI Info 0000017 d [SR] this element is referenced by [l:160 {80}] "' Package_37_for_KB943411 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.5.943411 - 110_RTM_neutral_GDR" "
2012-09-04 11:58:31, info CSI 00000180 [SR] could not reproject corrupted file [ml:520 {260}, l:72 {36}] '------? "\C:\Program Files\Windows Sidebar"------[l:24 {12}] "settings.ini"; source file in the store is also corrupted
2012-09-04 11:58:32, info CSI 00000182 [SR] full repair
2012-09-04 11:58:32, info CSI 00000183 [SR] validation of transaction
2012-09-04 11:58:32, info CSI 00000187 [SR] check and complete repair operation. All of the files and registry keys listed in this operation were repaired successfullyHi Mzvern,
· If she invites only to install Vista Service Pack?
That Factory Restore is the last step in resolving this issue.
Follow these steps to see what Windows Update is originally the question or any error message/code:
a. click Start, type Update in the start search box.
b. in the list of results, click Windows Update.
(c) in the left pane, click view update history.
In the meantime, follow the suggestions below for a possible solution:
Method 1: I suggest you follow the article and then check if it solves the problem.
Windows Update or Microsoft Update repeatedly offers the same update
http://support.Microsoft.com/kb/910339
Registry warning
To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft article:
Back up the registry
http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
Important: During the scan of the hard drive if bad sectors are found, the scanner tries to repair this sector, all available on which data may be lost.
Method 2: For cause of CFS, it wasn't able to repair files of Member, you can follow these steps.
If the System File Checker tool cannot repair a file, follow these steps:1.At a command prompt, type the following command and press ENTER:
takeown /f Path_And_File_Name
For example, type takeown /f E:\windows\system32\jscript.dll.
2. type the following command and press ENTER to grant administrators full access to the file:
ICACLS Path_And_File_Name/grant ADMINISTRATORS: F
For example, type icacls E:\windows\system32\jscript.dll/grant administrators: F.
3. type the following command to replace the file with a known good copy of the file:
Copy Path_And_File_Name_Of_Source_File Path_And_File_Name_Of_Destination
For example, type copy E:\temp\jscript.dll E:\windows\system32\jscript.dll.
For more information, see the following articles:
How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista
http://support.Microsoft.com/kb/928228
Problems with installing updates
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
Let us know the results.
-
Windows Fax and Scan for Windows Vista does not appear under all programs
Windows Fax and Scan for Windows Vista does not appear on my computer under all programs - where he might or he is still in charge?
If you have Vista Home Basic and Vista Home Premium, they do not come with Fax software included.
You will need software 3rd party Fax:
http://www.SnapFiles.com/reviews/Snappy_Fax_2000/snappyfax.html
Snappy Fax 2000 allows you to send and receive faxes from your computer. You can use your scanner to scan documents and then sent a fax to any fax machine, or use the print command other applications to use the virtual fax printer, allowing you to send faxes directly from most Windows applications. In addition, the program also supports faxes sending via the internet, filtering of unwanted faxes and transfer incoming faxes to other fax or e-mail addresses. Additional features include import address book, faxes by email (with zip for images support), OCR, spell checking and much more.
See you soon. Mick Murphy - Microsoft partner
-
Win 7: still can't find "Fax and Scan for Windows.
I tried and tried to locate the utility Win 7 embedded 'Fax and Scan for Windows' using the links given to me by your Anshul Arora a few days ago... and still does not activate/download... whatever, this utility application.
For example:
1. http://windows.microsoft.com/en-IN/windows7/products/features/windows-fax-and-scan does not help.
2 ""scan a doc or a picture with Win Fax and Scan " page says " click on the Start button, click on "all programs, then click on Windows and digitization." "" I don't see an "Windows Fax and Scan" when I do that.
3. I haven't installed scanning programs and had Win 7 look for a Setup program; can't.
Offhand, I would say that my version of Win 7 doesn't have this built-in utility!
I don't want to use the installation of Canon. I used Windows Fax and Scan "" hundreds of times and I like it better.
Help!
Mike Bragassa
June 10, 2014 00:44 UTC
It works; Thank you!
Mike Bragassa
You're welcome Mike. Don't forget to mark this thread as answered for the benefit of future users looking for answers to the same question
Thanks for your comments.
-
"Fax and scanning for Windows" for Win 7: where?
Where can I find a download for "Fax and Scan for Windows. I used on another machine and he prefers on my new software to printers. I've looked everywhere, it seems, and nothing... In my research, I see the phrase "Fax and Scan for Windows" but never a download... I only need analysis and printing functions.
Hello Mike,.
Thanks for posting your query on the Microsoft Community. We are happy to help you.
I wish to inform you that Windows Fax and Scan is built in utility, which ships with Windows 7. You can try going through the videos provided in the links provided below.
Fax and scan Windows
http://Windows.Microsoft.com/en-in/Windows7/products/features/Windows-fax-and-scan
Scan a document or photo with Windows Fax and Scan
http://Windows.Microsoft.com/en-us/Windows7/scan-a-document-or-photo-with-Windows-fax-and-scan
Install a printer
http://Windows.Microsoft.com/en-us/Windows/install-printer#install-printer=Windows-7
Hope this information helps. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.
Thank you.
-
I want to keep only a single copy of a System Restore Point that I created mine so I know when I did and why I did it.
With Windows Defender, I noticed that a new restore point is created whenever there is an update of Windows definitions, if I use the method of automatic or manual update. I found that when I opened the system restore and found a new copy with description: "Installation: Windows Update. In the history of Windows Defender, I noticed that the time corresponded to when the update the definitions file.
I unchecked the box under Windows Defender does not create a restore point before a scan of the system. I tried the Google search to find answers and can't seem to find someone mentioning this. Also MS sites does not seem to explain on the restores automatic system during the update of the definitions.
I'm also curious whether Windows Essentials will have the same problem that I am planning to use Essentials instead of Defender and thus get rid of Avast.
Hi Dudeus,
Yes, it is not possible to disable your system being created before windows updates restore.
Bindu S - Microsoft Support
-
Only update definitions for Windows Defender
need help!
* original title - why my computer will not update the definitions of WD? He goes to the window to update, but the green bar does not move... any solution? *
Hello
Read this information about windows defender
· If you use microsoft security essentials avg avira mcafee norton etc they disable the vista version of windows defender by default
the basics of Microsoft security has its own version of windows defender
and other anti-virus programs use their own particular type of application to scan for spyware and malware
It of nothing to worry and is the default action, which is designed for them to do
If the above does not apply to your machine to read the information on the below link on how to disable the windows defender service in vista or make an autostart to enable
and here is the method to remove it from startup in vista
http://www.groovypost.com/HOWTO/Microsoft/Vista/remove-Windows-Defender-from-Vista-system-startup/
and this is how you would normally activate or disable windows defender in vista from within defenders of own and options tools
http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-for-Microsoft-Vista/
and read this information to microsoft:
Error message when you run Windows Defender: «Error 0x800106ba»
http://support.Microsoft.com/kb/931849
Windows Update
or repost in the correct windows update forum
http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all
-
Information system: Intel Core Duo CPU E6750 @ 2.66 GHz, 4 GB Ram
2 HDD to 500 GB to 1.5 (1.0 + 500 GB) to empty, 32-bit of Windows Vista untimate
...............................................................................................................................
Windows Defender has been scanning hard drives for more than 29 hours, verification of objects a little less of 2 mio. It is not yet ready with the scan. Is this normal? How can I speed up the pocess? No other CPU intense application were aired at the same time. Said passerby-supported CPU is 0 to 5% and Ram-occupation is 65%
Windows Defender adds security in combination with Zone Alarm Extreme Security, or do I stop using Defender?
Thanks for any helpful input
Can I Defender takes MUCH too long - this is not normal in any way. I would cancel the scan, reboot and then try again. Try to do a HARD drive at a time and I would like to disable ZoneAlarm in the analysis to ensure that the delay is not a type of conflict between programs (maybe the other was a scan at the same time).
If the same thing happens again, try a boot minimum http://support.microsoft.com/kb/929135. If the problem goes away then it's just a matter of tracking down the culprit at the origin of the problem. Follow the procedures described in the article. Once found, remove, delete, disable or uninstall. Once remember to put Vista in normal status, as described in the procedures. If the problem occurs in clean mode then just restore the system to normal and reboot - this solution will not work.
Zone Alarm according to literature what do advocate; As he did not disable Defender during installation, however, there is no reason to disable Defender yourself. It will provide an extra layer of protection.
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
Maybe you are looking for
-
Search Google right click on the active tab
How google search right click and open in the current tab?
-
S52060f Pavilion Slim Line: how create a set of recovery disks is service pack 1 burn on the disc
Hello No problems with one of my desktop windows 7 but have some questions and concerns. Outside my thin line, I have 2 other computers hp windows 7. They are p6510T CTO Desk Top clubhouse and Pavilion HPE H8m Desk Top. I created my own set of r
-
TravelMate 240 replace HDD - what good ability?
Hello old TravelMate 240 needs new HARD drive. [Not my main pc!] Keep it operational for various reasons - old gadgets, history, affection, etc. [I also, my ZX Spectrum 48 k] I know that XP does support up to some HARD drive capability, but what I d
-
Windows Media Player does not appear in the window when selected
When you select Windows Media Player window does not appear, however, the 'media player logo' appears in the taskbar, including the thumbnail with my videos shown. When I click on the "logo media player" in the taskbar in the main window just flashes
-
Im trying to connect my Xbox 360 to my r4 m17x. the image works fine, the problem is that I can't get the audio to work. I tried to set the hdmi in default in the sound mixer, but this option does not yet appear. Please help I'm stumped.