DAQmx statements without DAQmx drivers loading on target PC cause fatal

Similar Questions

• 2010 DAQmx drivers remove 8.2 drivers

  I recently installed Labview 2010 and I just noticed that I have more DAQmx drivers to 8.2. I need support legacy applications in my environment of 8.2. I just need to reinstall the older DAQmx drivers? Experience tells me that it will hang by the most recent drivers.

  Hi Brian,.

  I am pleased to bring you this to - it seems that there are two potential product advice must be here:

  1. ADE DAQmx support for older versions of LabVIEW

  2. the ability to have multiple versions installed simultaneously DAQmx

  Nature of being both a hardware driver DAQmx API, #2 is probably a bit impractical.  I see #1 as a starting point for the discussion.  If you had the opportunity to update the kernel and API components for a compatibile with the latest LabVIEW version, but at the same time to keep the support of the API for older versions of LV not officially supported by the last DAQmx?

  I do not understand the situation you are facing, and I wish there was an easy solution.  For your whole particular of ADEs (LV LV 2010 8.2), you should be able to use DAQmx 9.1.5, but once LV 2011 spell (for example) you will have the same problem again.

  I encourage you to take the time to post a (or both) of the two suggestions above for the Exchange of ideas that I would be interested to continue any discussion.

  smercurio_fc wrote:

  Good thing NOR is followed pages they have where they display this information in the case, he would get real confusion.

  Speaking of confusing information, the two seemingly identical KnowledgeBase article a wrong shows that DAQmx 8.9 supports LV 2009 (8.9.5 was in fact the first version compatible with LV 2009).  Information will soon be corrected and the KBs will be grouped in one article.  I guess it never does hurt to check the readme file for this type of information for a particular version of DAQmx you are interested to be on the safe side.

  Best regards

• Could not load dll target ("C:\program files\backweb\backweb client\6.1.0.153\program\backweb.dll error code126)

  Original title: error code 126

  Could not load dll target ("C:\program files\backweb\backweb client\6.1.0.153\program\backweb.dll error code126)

  How can I fix it?

  Hello

  1. when exactly you get this error message?
  2. don't you make changes on the computer before this problem?

  Please answer these questions and tell us more about the issue. This could help us help you better.

  Check if the problem persists in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:

  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  1. click on start and then click Run.
  2. type msconfig and click OK.
  The System Configuration Utility dialog box appears.
  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

• Buy an iPhone Unlocked 7 in Apple stores in the United States without effective phone number and SSN?

  I am a foreign student in the United States, without SIM card and SSN, can I get an iPhone Unlocked 7 Apple store?

  If you pay full price, you may download the Verizon model at this time. That's assuming they have everything.

  If the store is close to go and ask them.

• WinXP Pro 2008 does not recognize my computer drivers & load the standard drivers 2001

  WinXP Pro 2008 does not recognize my computer drivers & load the drivers of standard system of 2001; Impossible to upgrade

  then load systemroot, I don't want systemroot, also charges 3.1 drivers, 95, 98. 2000 & winnt 3, 4, 5 &

  Sometimes it runs under DOS only & sometimes not

  I don't want to network & sharing, because there's someone attached to my system & load malware {pirate just deleted} & takes control so I'm at work & then interupts me online with flash & js causing anomalies onscreen, resumes also connection & homepage.

  Now my Norton is denied access (& other programs) & I can't use it

  Suffered disc & reworked several times, I tried the sharding & partitioning is not on all COMPUTERS

  This pirate has done this for 12 years, 7 computers & 5 operating systems.

  SOMETIMES HE TAKES CONTROL OF MOUSE & KEYBORD. YOU SHOULD SEE MY CDROM CONTROL CD ABNORMALLY.

  This is clearly abuse & I am at my wits end! Help me get rid of this danger, please

  but hidden.
  Try this, go to disk management (Control Panel, administrative tools, computer management).
  They appear here? If so, you may need to reassign a drive letter for them.

  If not, look in Device Manager, they appear in red/yellow or is there any "unknown devices"?

  Windows cannot have the drivers either, so you can download the drivers from the manufacturers Web site.

  1. start the computer.
  2. press F8 repeatedly to display the start menu.
  3. Select safe mode in the start menu.
  4. right - click on "my computer".
  5. Select Properties.
  6 select the Hardware tab.
  7. click on the button "Device Manager."
  8. click on the (+) plus sign next to CD/DVD players.
  9. right click on each component and select uninstall
  10. follow steps 9 to all components under this category.
  11. restart the computer.

  It must reload the drivers for the CD/DVD drive.
  or

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00619385&LC=en&cc=us

  check on this site how to connect dvd cd players

  I tried the following to help resolve the problem:
  1 attached Mouse, provided power but does not recognize the device. Assistant add hardware does not yet come upward.
  2. 3 readers USB flash, in every port and they were not recognized or attached.
  3 uninstall all devices of USB root hub and rebooted. No change.
  4 uninstalled all the USB controllers and restarted. No change.
  5 install a logitech mouse driver that is the same as the mouse installed. The mouse has not always recognized.
  6 re-flashed the BIOS. No change
  7. utility of diagnosis of Dell Ran and no problem found with the controllers or the USB ports

• I understand that the watch ntbtlog.txt file drivers loaded during the startup process. I'm worried when it shows driver loaded, but it is not a list.

  I understand that the watch ntbtlog.txt file drivers loaded during the startup process. I'm worried when it shows driver loaded, but it is not a list. Why is this?

  Hello

  Yes, it can be in hidden files that may cause by the virus.

  I also suggest you to see link and check.

  Show hidden files

  http://Windows.Microsoft.com/en-us/Windows7/show-hidden-files

• Can I send a request for 'Built' to someone with new material and operate without having to load any software? It is application DAQmx.

  I've finished, work application LabVIEW 7.1.  It is built as an executable file.  If I have a long distance user buy the necessary materials, my exe file will recognize the front end and work?

  Ron

  You should be able to create an installer that automatically includes all the needed to run your application.

  MAX configuration exported

  LabVIEW Run-Time

  DAQmx Run-Time

  MAX

• where the daqmx on real-time target files are stored?

  Hello

  I'm working on an application that is embedded in a desktop RT target.  To make the system easier to maintain in the future, I would like to be able to generate a DAQmx task programmatically to the *.ini file exported from MAX.  In this way, users don't know what my code does to recalibrate the sensors or manage new material; they only know how to use MAX and where to store the files in config on the target.

  Where are the task daqmx, channel, and scale information stored on an RT target?  I have been through the files on the target you are looking for something that contains my task data but have found nothing, while dropping a node of system property in a VI running on the target will give a correct list of the tasks that I set up.  (The project that contains the aforementioned VI has no tasks in it IE: I do not import into the project.)

  Is there a utility that runs on the RT target that can generate a task at the time of the *.ini files exported?

  Thank you

  Exahustive keyword search led me to an answer on the forums.  I'll post here a brief summary in case someone else uses the same key words I.

  1 export the MAX configuration file

  2. write a VI that uses tools in the system palette to load the configuration on the target in real time.

  3 profit.

  In my case, the VI I wrote to download the config DAQmx also generates the configuration files for the screw on the side host and target, so everyone knows what is called tasks.

• Is there a way to store the State of the vi loaded dynamically without resorting to tricks Subvi?

  I have a VI to open a UDP connection, data recovery, and then close the connection:

  

  Set the State to 1 opens a UDP connection.

  

  Definition of State 2 retrieves a UDP packet. Most of the boxes above is for the manipulation of data.

  

  Placed at 3 farm the UDP connection.

  Now, calling this vi as a sub - VI works fine:

  

  But calling the vi dynamically only:

  

  The second call inside the while loop will raise an error. Apparently, bibliographic are not valid from one call to the other when you call a vi loaded dynamically. What I need to know is, is there a convenient way to get around this?

  Hello

  The call dynamically a VI within a while loop can be pretty bad in terms of performance and I'm not sure it's a good idea.

  But if you really want to do this, using the function "Call by reference node" would be more appropriate in your case (you can find some examples easily).

  Best,

  J.

• Having problems with maintaining device drivers loaded on Windows 7 audit mode

  Trouble in paradise. I'm working on new images of Windows 7 and we're having problems that new pilots appear after the computer has been deployed. I extend to the computer in audit mode and either use an answer file to add drivers or add them manually using pnputil. I add drivers for 5 different Dell Optiplex computers. When you use the answer file the computer back mode audit on this computer, and drivers have been installed. After checking the Device Manager, everything is in place. I also checked the Driverstore folder to make sure they have been installed, they. But when I finished the process sysprep, the image on your computer and place it on another computer, it does not see the new drivers. I still have to add them manually. I did it on five computers with the same result so I know that the pilots were initially loaded correctly. For some reason any after sysprep, it seems to lose track of the path to the drivers when the computer starts in windows setup mode. Once installation is complete, the same missing drivers in Device Manager are still missing. Even if they were there to audit mode. If I send the device missing in Device Manager the driverstore in research, he finds the driver without problem. Here's what I use for sysprep:

  C:\Windows\System32\Sysprep\sysprep /audit /reboot /unattend:C:\Windows\System32\Sysprep\imagetest.xml

  And then run the oobe and generalize the windows sysprep interface options to stop out of audit mode

  I hope that I do just something wrong, it's simple.

  GOOSE

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• I would like to down load 6 CC lightroom, but I received only 4 cubes revolve around a long time, without sign down load. I have windows 7, my name and my password

  I would charge him lightroom 6CC. I had only 4 cubes around in circles for a long time without any sign of low load.i have my name and my password... my computer is windows7

  If you had purchased subscription, you can download via Adobe Creative Cloud app:

  Click on the link below and download the creative Cloud configuration file and use it to install the creative Cloud Desktop application.

  https://ccmdls.adobe.com/AdobeProducts/KCCC/1/Win32/CreativeCloudSet-up.exe

  Note:

  About 4 cubes, clear cookies n browser cache and try again or try using a different browser.

• Load control target

  Hello
  
  Target load if you place your order is not used (because we do not have the etl for business license), what happens if I load A table data in table B, then the same operator table B in table C?
  
  Can I be sure that table B is always loaded first?
  
  Kind regards
  Carsten.

  If you create a queue table a-> B-> table C table, you can be sure that B is completed before the data are transferred to C, even if you are not Enterprise ETL.

  If you create a mapping table A-> table B and table A-> table C then it is not so easy to identify, which table is filled first table A or table C. as far as I know, OWB uses the sequence in which the operators table where slipped into mapping as a default load order. "Random" approach cannot be used, like PL/SQL doesn't support any random execution in a package...

• Generator of forms/States without WebLogic 11g

  Hello
  is it possible to install forms/States 11 G developer/Builder, without having to install the Weblogic Server.
  We only use the generator! No moment of execution, without debugging, etc.
  With 10G we do not use local OC4J, so why do we need to install a "full" ApplicationServer just to create the FMAS and the generation FMXs.
  
  Thanks for the replies

  No, you must install WLS as well. So I guess you want to only create FMB files and then compile it and deploy it to a remote server?
  9368548 is an enhancement request to follow it. If you let me know some details of why you do not want to install WLS I can add your comments to the request.
  Concerning
  Grant

• The analysis of a sql statement without executing it

  Hello everyone,
  
  I would like to know a way of parsing sql statements to validate them, so I would get the error messages in advance without executing them.
  
  Here we have the difficult task to analyze several sql scripts and send corrections to the development team and thirty third companies before applying them in our production databases. I am ready to create a program web/pl sql, making this difficult task, at least one program to identify errors such as lack of owner of the table, nonexistent tables, syntax errors and so on...
  
  Any information will be a great help!
  
  Thanks in advance.

  Hi and welcome to the forum.

  Tip1:
  http://asktom.Oracle.com/pls/asktom/f?p=100:11:0:P11_QUESTION_ID:3648254441315

  Tip2:
  to bookmark this forum (SQL and PL/SQL)
  Bookmark http://tahiti.oracle.com (The Oracle Documentation)
  Bookmark http://asktom.oracle.com

  Tip3:
  On all the sites mentioned, you can do a quick search on key words of your interest and you will get the examples and explanations returned.

• Add more than 2 lines for a select statement without inserting rows in the base table

  Hi all
  
  I have a below a simple select statement that is querying a table.
  
  Select * from STUDY_SCHED_INTERVAL_TEMP
  where STUDY_KEY = 1063;
  
  but here's the situation. As you can see its return 7 ranks. But I must add
  2 rows more... with everything else, default or what exist... except the adding more than 2 lines.
  I can't insert in the base table. I want my results to end incrementing by 2 days in
  measurement_date_Taken on 01-APR-09... so big measurement_date_taken expected to
  end at study_end_Date...
  
  
  
  IS IT STILL POSSIBLE WITHOUT INSERT ROWS IN THE TABLE AND PLAYIHY ALL AROUND WITH
  THE SELECT STATEMENT?
  
  Sorry if this is confusing... I'm on 10.2.0.3
  
  Published by: S2K on August 13, 2009 14:19

  Well, I don't know if this request is as beautiful as my lawn, but seems to work even when ;)
  I used the "simplified" version, but the principle should work for your table, S2K.
  As Frank has already pointed out (and I fell on it while clunging): simply select your already existing lines and union them with the 'missing documents', you calculate the number of days that you are "missing" based on the study_end_date:

  MHO%xe> alter session set nls_date_language='AMERICAN';
  
  Sessie is gewijzigd.
  
  Verstreken: 00:00:00.01
  MHO%xe> with t as ( -- generating your data here, simplified by me due to cat and lawn
    2  select 1063 study_key
    3  ,      to_date('01-MAR-09', 'dd-mon-rr') phase_start_date
    4  ,      to_date('02-MAR-09', 'dd-mon-rr') measurement_date_taken
    5  ,      to_date('01-APR-09', 'dd-mon-rr') study_end_date
    6  from dual union all
    7  select 1063, to_date('03-MAR-09', 'dd-mon-rr') , to_date('04-MAR-09', 'dd-mon-rr') , to_date('01-APR-09', 'dd-mon-rr') from dual union all
    8  select 1063, to_date('03-MAR-09', 'dd-mon-rr') , to_date('09-MAR-09', 'dd-mon-rr') , to_date('01-APR-09', 'dd-mon-rr') from dual union all
    9  select 1063, to_date('03-MAR-09', 'dd-mon-rr') , to_date('14-MAR-09', 'dd-mon-rr') , to_date('01-APR-09', 'dd-mon-rr') from dual union all
   10  select 1063, to_date('03-MAR-09', 'dd-mon-rr') , to_date('19-MAR-09', 'dd-mon-rr') , to_date('01-APR-09', 'dd-mon-rr') from dual union all
   11  select 1063, to_date('22-MAR-09', 'dd-mon-rr') , to_date('23-MAR-09', 'dd-mon-rr') , to_date('01-APR-09', 'dd-mon-rr') from dual union all
   12  select 1063, to_date('22-MAR-09', 'dd-mon-rr') , to_date('30-MAR-09', 'dd-mon-rr') , to_date('01-APR-09', 'dd-mon-rr') from dual
   13  ) -- actual query:
   14  select study_key
   15  ,      phase_start_date
   16  ,      measurement_date_taken
   17  ,      study_end_date
   18  from   t
   19  union all
   20  select study_key
   21  ,      phase_start_date
   22  ,      measurement_date_taken + level -- or rownum
   23  ,      study_end_date
   24  from ( select study_key
   25         ,      phase_start_date
   26         ,      measurement_date_taken
   27         ,      study_end_date
   28         ,      add_up
   29         from (
   30                select study_key
   31                ,      phase_start_date
   32                ,      measurement_date_taken
   33                ,      study_end_date
   34                ,      study_end_date - max(measurement_date_taken) over (partition by study_key
   35                                                                          order by measurement_date_taken ) add_up
   36                ,      lead(measurement_date_taken) over (partition by study_key
   37                                                          order by measurement_date_taken ) last_rec
   38                from   t
   39              )
   40         where last_rec is null
   41       )
   42  where rownum <= add_up
   43  connect by level <= add_up;
  
   STUDY_KEY PHASE_START_DATE    MEASUREMENT_DATE_TA STUDY_END_DATE
  ---------- ------------------- ------------------- -------------------
        1063 01-03-2009 00:00:00 02-03-2009 00:00:00 01-04-2009 00:00:00
        1063 03-03-2009 00:00:00 04-03-2009 00:00:00 01-04-2009 00:00:00
        1063 03-03-2009 00:00:00 09-03-2009 00:00:00 01-04-2009 00:00:00
        1063 03-03-2009 00:00:00 14-03-2009 00:00:00 01-04-2009 00:00:00
        1063 03-03-2009 00:00:00 19-03-2009 00:00:00 01-04-2009 00:00:00
        1063 22-03-2009 00:00:00 23-03-2009 00:00:00 01-04-2009 00:00:00
        1063 22-03-2009 00:00:00 30-03-2009 00:00:00 01-04-2009 00:00:00
        1063 22-03-2009 00:00:00 31-03-2009 00:00:00 01-04-2009 00:00:00
        1063 22-03-2009 00:00:00 01-04-2009 00:00:00 01-04-2009 00:00:00
  
  9 rijen zijn geselecteerd.
  

  Is there a simpler way (in SQL), I hope that others join, and share their ideas/example/thoughts.
  I feel that it is using more resources there.
  But I have to cut the daisies before now, they interfere my 'grass-green-ess";)