WinXP Pro 2008 does not recognize my computer drivers & load the standard drivers 2001

Similar Questions

• I installed SP3 but WinXP Pro still does not recognize my 250 GB HARD drive. He returned to only 127 GB. Y at - it a patch or a patch that will fix this?

  It is a SEAGATE HDD.
  I have XP Pro with SP3.

  Hello AaronNoonan,

  1 have you checked the State of unity in disk management?

  2. have you checked if there is any disk not formatted or raw hard disk space?

  3 of internal drive or external drive are. what type you referring?

  I suggest you check if there is any formatted raw partition on disk management. You can check the link that will give you information on the management of records below:

  http://support.Microsoft.com/kb/309000

• Apple tv does not recognize my computer

  Hi all

  I have the latest version of the Apple TV software. On my Mac Pro, I run two OS 10.6.8 with iTunes 11.4 or OS 10.10.1 with iTunes 12.0.1. I have home sharing enabled in iTunes on both of these configs. But my computer does not recognize my Apple TV on the local WiFi network that I put in place. When I click on the "Computer" icon in Apple TV, he tells me to 'turn on home sharing. Someone at - it suggestions?

  Thank you.

  Dennis

  The following article can help you.

  Troubleshooting home sharing

  Problems of security software

  Troubleshooting connections and Wi - Fi networks

  Recommended Wi - Fi settings

  WiFi Diagnostic Software (for Mac users)

  You will also find help on this page, where I have collected some of the more unusual solutions for network problems.

  When you make adjustments to your network for better optimization, you can find some of the points mentioned on this page useful.

• Why my Bank does not recognize my computer whenever I connect, and this only happens when I connect with Firefox not other browsers

  I connect to Bank and firefox remembers my account #, but when the next screen appears the Bank does not recognize my computer. Each time to answer the correct security question, I check the box to remember as a personal computer, but he never does. This only happens when I use Firefox, not other browsers. Other browsers don't forget Acct and that it is a personal computer.

  Many issues of the site can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.
  Note: This will be you temporarily disconnect all sites, you're connected to.
  To clear the cache and cookies to do the following:

  1. Go to Firefox > history > clear recent history or (if no Firefox button is displayed) go to tools > clear recent history.
  2. Under "Time range to clear", select "all".
  3. Now, click the arrow next to details to toggle the active details list.
  4. In the list of details, see the Cache and Cookies and uncheck everything.
  5. Now click the clear now button.

  More information can be found in article to clear your cache, history, and other personal information in Firefox .

  We hope to hear from you soon.

  I wouldn't store any bank information on your computer for various security issues.

• the Bank does not recognize your computer

  Approximately a week before, when I log into my bank account, the background would be dim and a window shows indicating that (the Bank) does not recognize my computer and to please fill in the following information such as card number, ATM number, etc..  Of course, I didn't fall for it, but the same problem exists for other accounts such as Amazon, my gas utility account, my credit card accounts, etc...  What kind of virus is it called? And how to remove it, isolate it or quarantine it?

  Thank you

  I95Jim

  PML... It's a tactic that I didn't think to try... again.  Just before, I had a discussion with an expert/technician(at www.supportservices.microsoft.com/support/expert/Waldo).. .He took a while, but he eventually removed the spyware that was causing me grief (TDSSKiller, Norton I think) and he did a few other things... then I tested a variety of accounts several times successfully, the virus disappeared.  But, thank you for your suggestion and keep that account as a possible solution for similar incidents in the future.  Yes, there is a FUTURE...!

  Thank you

  I95Jim

• All-in-one printer, HP Photosmart 7510 does not recognize my computer as part of the network.

  Range of all-in-one printers, HP Photosmart 7510

  The function scan of my 7510 new does not recognize my computer as part of the network. (He said that the scanner can not find the computer)   It prints fine from the computer, however.  HP ran diagnostics and cannot find the problem in their system.  Suggested that I try to find a solution to the millisecond.  I was unable to find a solution yet.  Can anyone help?

  Hello

  I suggest try to connect your printer to the computer and check if the scanner works.

• Bridge does not recognize my camera more after the installation of El Capitan.  PLEASE FIX THIS!  I can't do my job!

  Bridge does not recognize my camera more after the installation of El Capitan.  PLEASE FIX THIS!  I can't do my job!

  If your Adobe program worked before installed El Capitan and does not work after you have installed El Capitan... How is problem from Adobe?

  FAQ on the Mac 10-11 https://forums.adobe.com/thread/1979303

  He has problems with Mac 10.11 El Capitan... which is perhaps one of them

  -Java https://helpx.adobe.com/dreamweaver/kb/dreamweaver-java-se-6-runtime.html

  -See answer #5 in https://forums.adobe.com/thread/1965850 for several solution links

• Adobe does not recognize my password by installing the flash player, on the adobe site, I have no problem connecting

  Adobe does not recognize my password by installing the flash player, on the adobe site, I have no problem connecting

  https://forums.Adobe.com/thread/1619850

• Satellite Pro 6100 does not recognize the single battery external power

  Whenever I have start Satellite Pro 6100 Win XP Pro with standard battery mounted and connected to the power supply computer laptop does not recognize the ext battery supply single supply and during 'start-up' goes into hibernation.

  By pressing the power on button laptops "wake up" and indicate that the battery is empty or may not even decide when completely loaded, then says connect the station even if still connected, looking under Toshiba console when it runs shows running on battery when still in the power of the ext?

  I have two batteries and both give the above symptoms even when I remove ext of laptop power always runs with power supply by battery but no light orange or green for battery.
  Any ideas?
  Concerning
  Phil

  Hello

  Is your AC adapter malfunctions or there is something wrong with the power supply to electronic s laptop.
  In the first case you could purchase a new compatible AC adapter and could check if the laptop can run successfully.
  The second possibility is a serious hardware problem, but in this case, the laptop must be checked by an authorized technician.

• New installation of XP PRO sp3 does not recognize the 500 GB HD

  OK, here are the details:

  System: Computer PORTABLE of Acer Aspire 1700 Pent4, 2 GB of RAM, 80GB (3.5 "full-size, trainee) IDE HD [this is the original HD on this laptop of size important which is designed to use disks 3.5" hard].

  Initial situation: Windows XP Pro (SP3 integrated) installed on HDD of 80 GB and works without poblems. BIOS does NOT show the ability of the intern HD in the BIOS screen. BIOS reports only the model and the serial number of the HD, and there is no options to specify the HD type/format (e.g., MLA, etc.)

  Available: Win XP Pro bootable CD slipstreamed with SP3; It is tested and verified work well to install PC or laptop!

  When running XP Pro on a partition internal 80 GB HD, and when I join a brand new WD 500 GB IDE HD via USB, HD is recognized correctly. I can partition and copy data on the HD 500 GB with no problems!

  When I replaced the old 80 GB HD with the new HD 500 GB HD interning on the laptop, I have the following problems:

  1. I can NOT boot into Windows XP Pro (SP3) which was Ghost on the HD 500 GB of the old 80 GB portable HD it recharges, and if I try the console recovery or secure boot, then the laptop restarts also.
  1B. I have Ghost xp partition to 80 GB HD to a piece of spare HD (40 GB) and replaced the 80 GB with the 40 GB HD and was able to start the laptop without problem. So the problem is NOT related ghost!

  2. I can't perform a clean install of Windows XP Pro (SP3 integrated) because Windows XP Setup recognizes the HD 500 GB GB 131 HD. Therefore, the remaining capacity is not recognized.

  3. I can NOT perform the installation of Windows XP pro (SP3 integrated), even if I have previously partition new HD 500 GB by attaching it to a free desktop PC and use Partition Magic, partitioner of Paragon Disk or other partitioning tools. After partitioning prior, when the 500 GB HD is installed on the laptop (as a trainee HD), then win xp installation lists quality HD of GB 131 and lists the existing partitions as corrupt!

  4. Curiously, if I use Knoppix, Debian, Ubuntu or linux boot CD Mint and start the laptop computer with one of these linux distributions, then the linux installer recognize the HD properly during the phase of recognition of material and later during the phase partitioning HD, the linux system to report a full capacity of 500 GB available for partitioning. In addition, when there are partitions, partitioning linux program then lists these partitions properly as well!

  Considering the 4 points and especially MS Windows XP PRO (integrated with SP3, which should recognize HD with sizes exceeding 137 GB limit - from MS says you must be at least XP SP1 to overcome the size 137 GB limit - and that the different distributions of linux can see the full-size HD 500 GB with no problems) which is exactly the problem with Win XP? Why it does not recognize the full capacity? And how to win xp recognizes a 500 GB capacity, if the new HD is attached to the laptop via USB as an external drive when running XP PRO (SP3) of the 80 GB internal HD?

  so... Can anyone sheds light on the issue with Win XP Pro installation on HD 500 GB IDE?

  Nicely,

  LO

  Hi Palcouk and Doc,

  I think that's the final answer!

  Although, there is a mixture of simple to complex responses to the problem at hand, what it all comes down is that there is a significant difference between the installation of Windows XP and Linux installer program. The XP installation program needs help from the BIOS to deal with HD, and if the BIOS does not support, XP not has no facility to remedy the situation. OTOH, most of Linux new kernels rely on the BIOS for a limited number of extended, but communicate directly with the hardware, in this case, with the HD and therefore manages the material accordingly.

  It seems among users of dual-booting (win/linux) using old PCs, it is a matter of very pretty. What they end up doing is using the first 137 GB that is seen by the BIOS without problem for XP (either as a single partition or divided into several partitions), and the rest of the space is used for Linux because linux has no problem.

  I guess that it really nails the problem with my laptop to a BIOS NON-lba-48-bit!

  Then close this thread as answered or matter who has more to say about this?

  LO

  P.S.: It was very nice meeting you fellows and appreciate all the help and tech expertise.

• Computer does not recognize SD card inserted in the printer

  I just bought an Officejet pro 8600.  When I insert an SD card or Memory stick into the printer, my computer does not recognize it so I can't transfer my photos.  This new printer allows is no longer this action?

  Good to know, message back me when you are ready and I will do everything I can to help you out!

  Have a great day and a wonderful weekend!

  -Spencer

• HP Officejet Pro 8610: HP Officejet Pro 8610 does not recognize ink cartridges

  My printer has ceased to recognize its ink cartridges. In a first stage, the problem happened occasionally and could be fixed by installing and reinstalling the cartridges or just wait a few days, but now it is continuous.

  When I turn on the printer, it immediately gives me an error (without code), saying that it cannot find the cartridges. All four are marked on the screen as not found. I followed the instructions of troubleshooting here: http://support.hp.com/us-en/document/c04090902

  The cartridges are genuine, they are the ones that came with the printer. I removed the, checked the contacts of the four. They look damaged or dirty, but used a cloth to clean all anyway. Put back them, did not help. Checked the latch, it was in the correct position. I even tried the restart without result.

  I tried to replace the cartridge with a new one (again, product HP genuine), but does not replace the printer either. And because all cartridges have failed at the same time, I can hardly belive the problem lies in them.

  I come from Finland, and I've not found a phone number, I could ask for help. Does one exist even for my country?

  Hey @Leathert,

  Welcome to the Forums of HP Support! I hope you enjoy your stay here.

  I see that your Officejet Pro 8610 e-all-in-one printer does not recognize the cartridges. I could help you with that, but it seems that you have already found the HP document that will guide you in troubleshooting. Instead, you can contact HP (in Finland) support by clicking this link.

  I hope you get your sorted question and I hope you have a great weekend!

  If this solves your problem then please help others to find this post by clicking on accept as Solution on my post.
  
  If you appreciate my help so please let others know by clicking on the icon below my post thumbs up.

• HP support site does not recognize my computer.

  I bought a HP Pavilion model p6347c at Costco which is now out of warranty. I am told that I need to update the chipset drivers, because the computer does not recognize my SD card reader. However, every time I try to access the support site and type in my template information, I get a message that it cannot find any reference to this model.

  My computer is a HP Pavilion model p6347c, Nr AY614AA-ABA. Operating system is Microsoft Windows 7 Premium family. Why HP claims that he knows nothing about the PC?

  Hello:

  Here is the link to the support page and drivers for your PC.

  http://h10025.www1.HP.com/ewfrf/WC/product?product=4120616&CC=US&DLC=en&LC=en&Query=AY614AA&Tool=

  Paul

• Windows 7 does not recognize external hard drive after the reboot

  I just bought a WD external hard drive.  I plugged in the USB port and automatically loaded everthing.  I even registered the product.  Then I was told that there was an update to the external hard drive.  I went ahead and put to day and when my computer restarted to him alone is no longer recognizes WD external hard drive.  I had another hard drive that I used where Windows 7 does not recognize it either?  Is it some sort of security setting, I need to adjust on Windows 7 64 bit?  Please notify.

  Check if the hard drive is assigned to a drive letter in disk management.

  Click Start, right click on computer

  Click on management of

  Expand disk management

  Select your external hard drive if its posted here

  Make a right click paths and change drive letter

  Restart your computer, open the computer in the start menu and see if it shows then.

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Site Web de Toshiba does not recognize my serial number of the Satellite A215-S7428

  Irregular deadlines. Site Web de Toshiba does not recognize my serial number. Someone at - he met who? I guess the alphabetic characters are uppercase. Serial number is 9 characters long with alpha characters at the two ends of the chain.
  Weird.
  Has anyone had problems to register their laptops?

  Wait a minute my friend. On website of Toshiba, you try to do this? I hope that you do not save the model of portable non-European on European support page.

  Am I mistaken or you're really trying to do? As far as I know, you have a model of cell phone US.