DAQmxBaseCreateTask-> Bus error: 10

Similar Questions

• Safari came out abnormally: Bus error running under El Capitan

  Processor 1.6 GHz PowerPC G5 machine

  El Capitan of OS X 10.5.8

  Could not launch Safari, get the following message: ".com.apple.Safari [371]) came out abnormally: Bus error."

  Time Machine has never been setup (so I can't restore from time machine).

  Tried to re - install the OS X El Capitan: reboot 'Command & R' key does not work (just restart the computer as usual). Using the key Options on the re-start appear three icons in the middle is the OS X disk icon (by clicking on it or by double-clicking on it doesn't do a thing), below left is an icon reload (a semicircle arrow, re-load OS X a drive icon), below right a right arrow pointing to the right (this brings back you to the normal running user mode screen). Cannot get any menu to launch the reload of the OS X.

  No idea what I'm doing wrong?

  The El Capitan OS X can be loaded on a Flash DRIVE or a DVD from another machine and then loaded on the computer problem?

  Thanks for all the points or help you.

  Wait, 10.5.8 is not El Capitan, 10.5.8 Leopard & the hifgest that you can run on a G5.

  Usually the PPC Macs as G5s cannot start OSX USB, although there may be a work around Open Firmware.

  CMD + r only works in 10.7 & upwards.

  See if it works...

  Startup, (now shift key at startup), run disk utility in Applications > utilities, then highlight your reader, click on repair permissions, restart when done.

  (Secure boot can remain on the gray radian for a long time, let go, he tries to repair the hard drive & clear the caches)

• A fatal bus error was detected on the function of the peripheral bus component 0 7 0

  Hi all

  I'm trying to diagnose a hardware problem with my Dell PowerEdge R410. The problem occurred after a kernel patch and reboot linux security (I'm under Ubuntu 14.04 and I'm on Linux 3.13.0 - 100-generic). Initially, the machine would crash when starting in the BONE, but I managed to do always start too.

  I see the following errors:

  --------------------------------------------------

  Severity: critical
  Date and time: Saturday 22 Oct 05:50:30 2016
  Description: A fatal bus error was detected on the function of the peripheral bus component 0 7 0.

  Severity: critical
  Date and time: Saturday 22 Oct 05:50:30 2016
  Description: A fatal bus error was detected on an element at location 1.

  ----------------------------------------------------

  I'm having a hard time figuring what component, it exactly. Here is the result of lspci:

  ------------------------------------------------------------------------------------------------

  00:00.0 Host bridge: Intel Corporation 5500 IO Hub port ESI (rev 13)
  00:01.0 PCI bridge: Intel Corporation 5520/5500 / X 58 i/o Hub PCI Express Root Port 1 (rev 13)
  00:03.0 PCI bridge: Intel Corporation 5520/5500 / X 58 i/o Hub PCI Express Root Port 3 (rev 13)
  00:07.0 PCI bridge: Intel Corporation 5520/5500 / X 58 i/o Hub PCI Express Root Port 7 (rev 13)
  00:14.0 PIC: Intel Corporation 7500/5520/5500 / X 58 i/o Hub System Management records (rev 13)
  00:14.1 PIC: Intel Corporation 7500/5520/5500 / X 58 i/o Hub GPIO and Notepad records (rev 13)
  00:14.2 PIC: Intel Corporation 7500/5520/5500 / X 58 control status of e / Hub and RAS records (rev 13)
  00:1 a. 0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4
  00:1 a. 1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5
  00:1 a. 7 USB controller: Intel Corporation 82801JI (ICH10 family) USB2 EHCI Controller #2
  00:1d.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1
  00:1d.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2
  00:1d.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3
  00:1d.3 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6
  00:1d.7 USB controller: Intel Corporation 82801JI (ICH10 family) USB2 EHCI Controller #1
  00:1E.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90)
  00:1F.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller
  00:1F.2 IDE interface: Intel Corporation 82801JI port (ICH10 Family) SATA IDE Controller #1 4
  00:1F.5 IDE interface: Intel Corporation 82801JI port (ICH10 family) SATA IDE Controller #2 2
  01: 00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5716 Gigabit Ethernet (rev 20)
  01:00.1 Ethernet controller: Broadcom Corporation NetXtreme II BCM5716 Gigabit Ethernet (rev 20)
  Serial Attached SCSI 03:00.0 controller: LSI Logic / Symbios Logic SAS2008 PCI - Express Fusion - MPT SAS-2 [Falcon] (rev 03)
  04:03.0 VGA compatible controller: Matrox Electronics Systems Ltd. MGA G200eW WPCM450 (rev 0a)
  Fe: 00.0 Host bridge: Intel Corporation Xeon 5600 Series QuickPath Architecture generic Non-core records (rev 02)
  Fe: 00.1 Host bridge: Intel Corporation Xeon 5600 Series QuickPath Architecture system address Decoder (rev 02)
  Fe: 02,0 Host bridge: Intel Corporation Xeon 5600 Series QPI Link 0 (rev 02)
  Fe: 02.1 Host bridge: Intel Corporation Xeon 5600 Series physical QPI 0 (rev 02)
  Fe: 02.2 Host bridge: Intel Corporation Xeon 5600 Series Mirror Port link 0 (rev 02)
  Fe: 02.3 Host bridge: Intel Corporation Xeon 5600 Series mirror Port link 1 (rev 02)
  Fe: 02.4 Host bridge: Intel Corporation Xeon 5600 Series QPI Link 1 (rev 02)
  Fe: 02.5 Host bridge: Intel Corporation Xeon 5600 Series physical QPI 1 (rev 02)
  Fe: 03.0 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Registers (rev 02)
  Fe: 03.1 Host bridge: Intel Corporation Xeon 5600 Series Memory Controller target address decoder built-in (rev 02)
  Fe: 03.2 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller RAS Registers (rev 02)
  Fe: 03.4 Host bridge: Intel Corporation Xeon 5600 Series integrated Memory Controller Test Registers (rev 02)
  Fe: 04.0 Host bridge: Intel Corporation Xeon 5600 Series memory controller channel 0 control integrated (rev 02)
  Fe: 04.1 Host bridge: Intel Corporation Xeon 5600 Series integrated controller channel 0 address memory (rev 02)
  Fe: 04.2 Host bridge: Intel Corporation Xeon 5600 Series integrated memory controller 0 (rev 02) grade channel
  Fe: 04.3 Host bridge: Intel Corporation Xeon 5600 Series integrated memory controller channel 0 control thermal (rev 02)
  Fe: 05.0 Host bridge: Intel Corporation Xeon 5600 Series integrated controller channel 1 controls memory (rev 02)
  Fe: 05.1 Host bridge: Intel Corporation Xeon 5600 Series integrated controller channel 1 (rev 02) memory address
  Fe: 05.2 Host bridge: Intel Corporation Xeon 5600 Series integrated memory controller channel 1 row (rev 02)
  Fe: 05.3 Host bridge: Intel Corporation Xeon 5600 Series integrated memory controller channel 1 control thermal (rev 02)
  Fe: 06.0 Host bridge: Intel Corporation Xeon 5600 Series integrated controller channel 2 controls memory (rev 02)
  Fe: 06.1 Host bridge: Intel Corporation Xeon 5600 Series integrated controller channel 2 (rev 02) memory address
  Fe: 06.2 Host bridge: Intel Corporation Xeon 5600 Series integrated memory controller channel 2 rank (rev 02)
  Fe: 06.3 Host bridge: Intel Corporation Xeon 5600 Series integrated memory controller channel 2 controls thermal (rev 02)

  ------------------------------------------------------------------------------------------------

  So, one of the components seems to be "00:07.0 PCI bridge: Intel Corporation 5520/5500 / X 58 hub of e/s PCI Express Root Port 7 (rev 13)", but I'm not clear as to what this component is
  and what it connects too. Crack, "a fatal bus was detected on an element at location 1." seems too vague. What is slot 1 in this case?

  My questions are:

  What components apply to critical errors?

  I have to do things in the following order:

  -Unplug the power cord and hold it for 20 seconds
  -Firmware updates
  -Try reinstalling components
  -Replace parts

  PS. I'm no longer under warranty

  Thank you

  Dave

  Hello

  Location 1 must reference slot PCie 1. It is very likely the slot in which the PERC controller is. Your order of troubleshooting is correct. If it's the only occurrence, resettlement and the firmware update are probably enough.

• Latest installer called "17au your" crashes with a bus error.

  Hey, the most recent Flash Installer immediately crashes with a bus error when I try to launch it. I don't know how to solve this problem outside waiting for the automatic update and see if that fixes the problem. Does anyone have an idea how to solve this problem, or how report a bug?

  Thanks, I tried the installer suggested your link who worked offline and appears as 17.0.0.188 in system preferences.

  I had the installer on this machine with 10.6, but I never downloaded this manually from Adobe. An Adobe apeared pop up when I was using the browser to view flash content (television network), telling me that a new version is available. I put in place of Flash preferences to enable automatic updates, but it seems to somehow always suggest me to do with this pop-up window instead.

  I think remember that the automatic update is delayed by a few days, so I usually go for the install on the pop-up button.

• PXI-8512/2 XNET CAN stops when bus errors occur on Spadina

  Hello, I use the PXI-8512/2 in a noisy electrical environment so I often get errors on the CAN bus. I noticed that often 8512 stops communicate. In my dual port 8512/2, 4, # LED that flashes normally will eventually turn off. However, I have other devices listening on the same bus; report errors, they continue to stay alive. Is there anyway that I can get the 8512 continue to work in the presence of errors? I use the custom device XNET for VeriStand 2009 and do not see the error handling options. In fact, I don't get any notification of errors at all. I just noticed that my incoming CAN stop signals and my leavers have no effect. Thank you.

  Hello

  You shouldn't have to remove from your devices.  Just update the configuration and engine llbs and restart the Explorer system, save your configuration and redeployment.  Let me know if you see problems.

  (There are new files also copied into the directory of device custom if you want to use the bus monitor function... so you can replace the entire record of the NOR-XNET if it's easier).

• Cisco router restarts randomly with Bus error

  Cisco router restarts randomly with the following error:

  System has been restarted by error of bus to PC 0x4183614C, speech 0 x 95848 at 09:30:28 UTC Tuesday, April 23, 2013

  I've pasted below see the chimneys and release the version.

  view the stacks

  
  

  Minimum factory chimneys:

  Format name / free

  5396/6000 inspect Init Msg

  Subsystem SPAN 5368/6000

  58920/60000 EEM Auto record Proc

  Automatic start of 4772/6000 upgrade process

  DIB 5164/6000 error message

  HAND OF SASL 5396/6000

  4968/6000 LICENSE DEFAULT AGENT

  5368/12000 Init

  4216/6000 update prst

  4384/6000 VPN_HW_MIB_CREATION

  5188/6000 RADIUS INITCONFIG

  Update process random rom 2128/3000

  8356/12000 SSH process

  Stats URPF 5316/6000

  Interruption of battery level:

  Level named format / unused

  Network interfaces 1 1484828 6284/9000

  2 3264990 8548/9000 DMA/Timer Interrupt

  3 1 8388/9000 PA Int management Manager

  Console 4 115 8612/9000 Uart

  External interrupt 5 0 9000/9000

  NMI 7 223352 8564/9000 interrupt handler

  Spurious interrupts: 11

  System has been restarted by error of bus to PC 0x4183614C, speech 0 x 95848 at 09:30:28 UTC Tuesday, April 23, 2013

  Software of 2800 (C2800NM-ADVSECURITYK9-M), Version 12.4 (24) T, RELEASE SOFTWARE (fc1)

  Technical support: http://www.cisco.com/techsupport

  Updated Thursday 25 February 09 17:55 by prod_rel_team

  Image text-base: 0 x 40011240, database: 0x42B41940

  The failure of the system stack trace:

  FP: 0X472252B8, RA: 0X4183614C

  FP: 0 X 47225310, RA: 0X418312F8

  FP: 0 X 47225348, RA: 0X41647DC0

  FP: 0X472253A8, RA: 0X4164A8F4

  FP: 0 X 47225428, RA: 0X4164B248

  See the version

  
  

  Cisco IOS software, 2800 Software (C2800NM-ADVSECURITYK9-M), Version 12.4 (24) T, RELEASE SOFTWARE (fc1)

  Technical support: http://www.cisco.com/techsupport

  Copyright (c) 1986-2009 by Cisco Systems, Inc.

  Updated Thursday 25 February 09 17:55 by prod_rel_team

  ROM: System Bootstrap, Version 12.4 (1r) [hqluong 1r], RELEASE SOFTWARE (fc1)

  availability of Cisco is 28 minutes

  System returned to ROM by bus to the 0x4183614C PC error, address 0 x 95848 at 09:30:28 UTC Tuesday, April 23, 2013

  System image file is "flash: c2800nm-advsecurityk9 - mz.124 - 24.T.bin".

  This product contains cryptographic features and is under the United States

  States and local laws governing the import, export, transfer and

  use. Delivery of Cisco cryptographic products does not imply

  third party approval to import, export, distribute or use encryption.

  Importers, exporters, distributors and users are responsible for

  compliance with U.S. laws and local countries. By using this product you

  agree to comply with the regulations and laws in force. If you are unable

  to satisfy the United States and local laws, return the product.

  A summary of U.S. laws governing Cisco cryptographic products to:

  http://www.Cisco.com/WWL/export/crypto/tool/stqrg.html

  If you need assistance please contact us by mail at

  [email protected] / * /.

  Cisco 2821 (revision 53.51) with 1036288K / 12288K bytes of memory.

  Card processor ID FCZ1017732F

  2 gigabit Ethernet interfaces

  2 modules of virtual private network (VPN)

  Configuration of DRAM is wide with parity 64-bit capable.

  239K bytes of non-volatile configuration memory.

  250880K bytes of ATA CompactFlash (read/write)

  Configuration register is 0 x 2102

  You want to use the tool interpreter of output for this work:

  http://www.Cisco.com/pcgi-bin/support/OutputInterpreter/home.p

  For more information about the resolution of crashes, see this article:

  http://www.Cisco.com/en/us/products/HW/IAD/ps397/products_tech_note09186a00800b4447.shtml

  In this case, it looks like CSCsy09250, described here:

  http://www.Cisco.com/en/us/products/CSA/Cisco-SA-20100324-SCCP.html

  You should contact Cisco for the software updated by following the instructions of this bulletin.

  That crash possibly caused by part of sone intentionally sends out packets malformed to your device, so if you have reason to believe that someone in your community could run metasploit or similar "Penetration Testing" tools, you can look into that as well.

• PCIe Bus error warning

  Hello need help with this error...

  You can find the error image to attach file... it's only happen when chart pantented is connected, it's all new alienware leptop 17 r3...

  This is normal when the amp is connected. There is nothing to worry.

• Huawei mobile connect-Device Enumerate Bus error

  Dear Sir.

  I cannot connect dongle for laptop, as shown in Device Manager alet and cannot instrall on drivers also. Pls help to slove this problem.

  

  my laptop product number-B3K23PA #ABG

  Hardware ID

  PCI\VEN_14E4 & DEV_4727 & SUBSYS_1795103C & REV_01
  PCI\VEN_14E4 & DEV_4727 & SUBSYS_1795103C
  PCI\VEN_14E4 & DEV_4727 & CC_028000
  PCI\VEN_14E4 & DEV_4727 & CC_0280

  Thank you

  ERVs.

  Hello

  Your images have been approved so I still don't see them. Admin & Moderators have to watch all images first before approval to avoid the display of the images that are inappropriate on this forum people.

  Kind regards.

• Remove old objects SnapshotUtilsEx * results by Bus error

  Hello

  We develop a PlugIn for CS6 that maintains multiple snapshots and are faced with the following problem. At times, we need free memory previously allocated by an object of SnapshotUtilsEx (by calling the destructor via del), which translates into a fall of InDesing. Strange thing is that if you remove the object immediately after its use (as can be found in the sdksamples) everything is going well, while deleting an old instant results in an accident.

  We hunted the problem to the bottom for a minimal example (see excerpt below), but were not able to find a solution, and we found no similar problems in the forum.

  Any help appreciated, we are happy to share more information if necessary.

  class bird: public CControlView

  {

  (…)

  private:

  (…)

  SnapshotUtilsEx * i_store_the_current_snapshot;

  SnapshotUtilsEx * i_store_the_previous_snapshot;

  };

  (…)

  MyView::MyView (IPMUnknown * boss)

  : CControlView (boss)

  {

  i_store_the_current_snapshot = NULL;

  i_store_the_previous_snapshot = NULL;

  }

  (…)

  This version works (but does not match our needs)

  void CMMCS6UIPanelWTFView::Draw (IViewPort window, SysRgn updateRgn)

  {

  (…)

  i_store_the_current_snapshot = new SnapshotUtilsEx (spreadUIDRef);

  i_store_the_current_snapshot-> Draw (IShape::kPreviewMode, kTrue);

  __DrawSnapshot (gPort, 0, 0, 200, i_store_the_current_snapshot);

  using SnapshotUtilsEx::CreateAGMImageAccessor() and IGraphicsPort::image (.)

  delete i_store_the_current_snapshot;

  (…)

  }

  This wok version IS NOT

  void CMMCS6UIPanelWTFView::NotWorkingDraw (IViewPort window, SysRgn updateRgn)

  {

  (…)

  i_store_the_previous_snapshot = i_store_the_current_snapshot;

  i_store_the_current_snapshot = new SnapshotUtilsEx (spreadUIDRef);

  i_store_the_current_snapshot-> Draw (IShape::kPreviewMode, kTrue);

  __DrawSnapshot (gPort, 0, 0, 200, i_store_the_current_snapshot);

  using SnapshotUtilsEx::CreateAGMImageAccessor() and IGraphicsPort::image (.)

  If (i_store_the_previous_snapshot! = NULL)

  {

  delete i_store_the_pre_previous_snapshot;

  }

  (…)

  }

  Hey Toke,

  don't know if useful for your purpose, but that's what we were doing to solve our problem.

  As said, we maintain several snapshots during the lifetime of our plugin. In the end, we did not store instances of the SnapshotUtilsEx class directly, but only of the "instance" of the _t_AGMImageRecord (defined in GraphicsExternal.h) struct. Retrieve an AGMImageRecord once you have a snapshot can is simply (screenshot-> CreateAGMImageAccessor())-> GetAGMImageRecord().

  What is a little tricky is to allocate memory for empty * baseAddr ('Member' of _t_AGMImageRecord), however, help came from the example of the SDK software PanelTreeView (PnlTrvCustomView.cpp, ~ lines 301-316, Ref. CS6 InDesign SDK).

  I am happy to lear more about this part of the API, so would be happy if share you something 'new', you have learned about it.

  Best regards

  Ferdinand

• Bus SCSI soft CX4-120 error

  Hello

  Everything began to receive these warnings (about 10) our CX4-120

  Soft code error event of SCSI Bus 0 x 801 all for the same drive.

  I was wondering if there is anything I can check if there is a problem with this particular car?

  Thank you

  Hello doyleja2,

  Yes because you have a spare drive on your CX4-120 if you have a drive down it would be the move & replace the defective drive.  Like eating Dev said that you can get a soft scsi bus due to a bad sector error.  So what if all you get is just the SCSI Bus error & not getting is not recommended as disk replacement then the drive should be good.  But you'll want to keep an eye on it to see if in the future, you might get a recommended disc replacement if soft scsi bus errors start to come more often on the same drive.

  Please let us know if you have any other questions.

• Help with Bus 7204VXR error

  Hello

  I got this router crash a few times a couple of days, but has collapsed since. Here is the HS worm showing the bus error:

  Cisco IOS Software, software 7200 (C7200-JK9S-M), Version 12.4 (3) VERSION of the SOFTWARE (fc2)
  Technical, support httpwww.cisco.comtechsupport
  Copyright (c) 1986-2005 by Cisco Systems, Inc.
  Updated Saturday, July 22 05 0911 by hqluong

  ROM system Bootstrap, Version 12.1 (20000710044039) [nlaw-121E_npeb 117], SOFTWARE DEVELOPMENT
  Software BOOTLDR of 7200 (C7200-KBOOT-M), Version 12.3 (26), VERSION of the SOFTWARE (fc2)

  7200vxr1 operating time is 2 days, 2 hours, 17 minutes
  System returned to ROM by bus to the 0x6084C0E4 PC error, address 0xFFF0 213620UTC MON Sep 12 2016
  Reboot system 213830 UTC MON Sep 12 2016
  System image file is disk0c7200-jk9s - mz.124 - 3.bin

  And here is the result of stacks of show:

  Minimum factory chimneys
  Name FreeSize
  DHCPD 1128012000 receive
  background charger 5913660000 script
  23123000 booklet allegro init
  41846000 update prst
  Error message 43086000 DIB
  Init 322012000
  51526000 RADIUS INITCONFIG
  22683000 rom randomly update
  TCP 3484436000 command
  Exec virtual 630812000
  5702460000 AFW_application_process

  Interrupt level piles
  Level gave the name of UnusedSize
  1 1044914134 74689000 network interfaces
  2 111040 85729000 DMATimer interruption
  3 0 90009000 PA Int management Manager
  4 736 86449000 console Uart
  5 0 90009000 OIRError interruption
  7 45261558 85729000 NMI interrupt handler

  System has been restarted by bus to the 0x6084C0E4 PC error, address 0xFFF0 213620 UTC MON Sep 12 2016
  7200 (C7200-JK9S-M) software, Version 12.4 (3) VERSION of the SOFTWARE (fc2)
  Technical, support httpwww.cisco.comtechsupport
  Updated Saturday, July 22 05 0911 by hqluong
  Image text-base 0x6000905C, database 0x62AB2000

  The failure of the system stack trace
  FP 0X65F31FA8, RA 0X6084C0E4
  FP 0X65F31FF0, RA 0X61F9AE00
  FP 0X65F32008, RA 0X61F8EA0C
  FP 0X65F32038, RA 0X61FD9F48
  FP 0X65F320A0, RA 0X61FD9A3C
  FP 0X65F320B8, RA 0X61FDC0E8
  FP 0X65F320D8, RA 0X61FBF4D4
  FP 0X65F32100, RA 0X61FC43D8

  I'm not sure if this is pointing to a hardware failure or if it's a bug in the iOS which caused the accident. Advice to get me in the right direction would be useful.

  Thank you

  Disclaimer

  The author of this announcement offers the information in this publication without compensation and with the understanding of the reader that there is no implicit or explicit adequacy or adaptation to any purpose. Information provided is for information purposes only and should not be interpreted as making the professional advice of any kind. Use information from this announcement is only at risk of the reader.

  RESPONSIBILITY

  Any author will be responsible for any wha2tsoever of damage and interest (including, without limitation, damages for loss of use, data or profits) arising out of the use or inability to use the information in the view even if author has been advised of the possibility of such damages.

  Poster

  Assuming that it's a software problem, and given your IOS version is early in the 12.4 train, you could just upgrade to a later version of 12.4.

• R510 A bus fatal error location 3

  R510 Description: a fatal bus error has been detected on a component to slot 3, which is housing 3?

  The server is a non hot swap Bay 4 with 3 drives in RAID5 on a PERC S300, the 4th channel has a SSD 1 TB on this subject. I updated the records of 500 GB to 1 TB and installed Server 2012 R2 SP2. I had 2 of these errors in the last 2 days and need to know what to address.

  I think that slot 3 is the PCI express bus, maybe PCI3 ASM1062 Serial ATA Controller can anyone confirm and suggest what to do?

  Clindell,

  Slot 3 on the R510 is the slot PCIe background on extension of the expansion. (see below)

  

  What I would say is to remove and reinstall the expansion cards, editing maps and then all the cables running to one. Then try feeding the server upwards. If the error persists, I suggest to delete anything in the Groove 3 and then on to see if it clears.  If yes the card is probably the issue.

  You can update the BIOS and iDrac as soon as well.

  Let me know what you see.

• bus using 10.2.0.4 error client on Mac OS 10.5.5 (client)

  Hello
  does anyone have this working? It should work on the Mac intel with 10.5. The only thing I get is a bus error 10.5.5. I already tried the customer without success of restoring links.
  
  This happens with both the instant client as with the full client.
  
  Best regards
  Ronald
  http://homepage.Mac.com/ik_zelf/Oracle

  I had the same problem with my new MacBook Pro with preinstalled Mac OS X 10.5.5

  Doing some research I found that "bus error" was caused by the usr/lib/libSystem.B.dylib library. And the interesting part is that this library file was different from that of the same file on my other Mac with Mac OS X, upgrade to 10.5.5. When I copied this file from another Mac library on my MacBook Pro then sqlplus started working but I got error of buses in other programs. This suggests that there is something wrong with preinstalled 10.5.5 system libraries.

  But now I also upgraded to Mac OS X 10.5.6 and /usr/lib/libSystem.B.dylib is upgraded to a newer version, thus and therefore sqlplus started working.

• Tecra A7 PTA71E: Bus of serial controller resource conflict PCI on motherboard

  Hello

  Sorry for my English.

  I have a problem with this laptop Tecra A7 PTA71E 00D00DSP. One of my clients transported this laptop with the next serial number.
  When you turn on the laptop, before windows login, seems that three consecutive messages:

  Conflict of resources - Bus serial PCI controller on the motherboard.
  BUS ERROR: 07 device: function, 06:01
  Resource conflict - PCI on the motherboard mass storage controller.
  BUS ERROR: 07 device: function: 06, 02
  Conflict of resources - Bus serial PCI controller on the motherboard.
  BUS ERROR: 07 device: function, 06:03

  I changed the RAM, hd, eating, with the same result.
  If you come in the bios and save the changes with the best configuration or default installation, the result is the same. I read in the forums that this error is tipycal in some toshiba models and the only solution is to change the motherboard. I hope it 'sn' t true and you, the experts of the toshiba, might help me find or tell an alternative, because I think my client won't like the motherboard, because it is usually too expensive.

  Who is King
  Mikel Pastor

  Hello

  > I read in the forums that this error is tipycal in some toshiba models and the only solution is to change the motherboard.
  I doubt s typical error for Toshiba laptop.
  According to this error message, there is something wrong with PCI devices on the motherboard, and this error may happen to any laptops from different manufacturers it typical error of s which is related to the question of the motherboard.

  According to me, there is no much to do you'll need a new motherboard.

• Satellite A210-1AH - USB conflict pci bus controllers resource at startup

  Hello

  I have a Toshiba Satellite A210-1AH
  model without PSAFGE-05X01GDU

  When I start the laptop after the toshiba logo. The laptop gives the following error:

  Bus ERROR USB controller resources conflict pci on the motherboard
  Bus: 14, device: 06, function: 00

  Bus ERROR USB controller resources conflict pci on the motherboard
  Bus: 14, device: 06, function: 01

  Bus ERROR USB controller resources conflict pci on the motherboard
  Bus: 14, device: 06, function: 02

  Bus ERROR USB controller resources conflict pci on the motherboard
  Bus: 14, device: 06, function: 03

  Bus ERROR USB controller resources conflict pci on the motherboard
  Bus: 14, device: 06, function: 04

  Press F1 to load the default values, F2 for Setup

  I tried:
  -load the default values
  -disconnect the dvd player, hard disks, memory
  -disable the hardware in the bios

  Can someone help me?

  PS. I can't find this model on the driver here, to download a bios update.
  This model is not longer supported?

  Ronald

  Hello

  You can enter the BIOS settings? If you can do this by using F2 to start together to check and default settings if the same thing will happen again. You can try to put the bootable disc in ODD and try to check if you have access to the HARD drive.

  If the same thing will happen again and again I'm afraid the motherboard is a failure of m.