Cisco router restarts randomly with Bus error

Similar Questions

• XP SP3 restarts randomly with no BSODS and no event registered.

  It happens once a day or every two days. Sometimes while I'm working. Sometimes, when the machine is idle in the middle of the night.
  No blue screen appears.
  I removed the checkbox control restart automatically to show the BSOD.
  No errors in the event log.
  I checked the memory and HARD drive.
  I did an extensive search of viruses with Microsoft Security Essentials and moy.
  All the recent critical updates are installed.
  I'm sure it's a software and not a hardware problem because I have Linux installed on another partition, and it never fails when running Linux.
  This machine works duo Intel. I have another machine AMD XP suffers exactly the same problem.
  Thank you very much for the help with this.

  The most common cause for a sudden and random reboot is overheating.  The fact that this does not happen with Linux can be because Linux can operate more efficiently and the CPU is not as hot when you do what you do on Linux compared to what you do in Windows.  To confirm this, download and run the program 'CoreTemp' freeware
  CoreTemp: <> http://www.alcpu.com/CoreTemp/ >
  who's going to show you how hot your CPU is running.  If shows temperature running near the hot limit, then consider opening your computer, check that all your fans are running and clean all the dust out of the CPU all about.

  HTH,
  JW

• Windows speech recognition stops randomly with the error: «the instruction at 0x6434c5e9 referenced memory at 0x0ef2ea80.» The memory could not write. »

  Original title: "the instruction at 0x6434c5e9 referenced memory at 0x0ef2ea80. The memory could not write. "And the instruction at 0x6434c5e9 referenced memory at 0x0ef2ea80. The memory could not be written.

  I have Windows Vista and I use speech recognition Windows, a lot of things. I have used it for years and have really learned to rely on it! Unfortunately, since a recent upgrade of windows installed, Windows speech recognition stops randomly in the middle of using it and it gives me the following error message: «the instruction at 0x6434c5e9 referenced memory at 0x0ef2ea80.» The memory could not write. "And then it stops. When I open it again, it seems to open normally and it will work for varying amounts of time before it does again and I get a different error message.

  I tried to restart and it did not help at all. Please, can someone help me? Please?

  Hi Alicia,.

  1 update you tried to install?

  Method 1:

  You can try to run a SFC scan and check.

  This problem may occur if a system file is missing or damaged.

  You can refer to the method-the System File Checker tool in the following article:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2:

  Step 1:

  Check the updates that are installed recently.

  You can view the following link to check the installed updates:

  See the Windows updates are installed

  Step 2:

  You can uninstall these updates and try to install the update one at a time and check for the issue.

  Remove an update

  Method 3:

  You can also try a system restore to a restore point before the updates were installed.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following link:

  System restore

  System Restore: frequently asked questions

  Hope this information is useful.

• MB Pro restarts randomly with the ethernet cable is plugged

  I recently bought a thunderbolt reduction - Ethernet [1] and it works very well. The problem is that when it is plugged in, my MacBook Pro (13', 2015, i5, 8 GB) gets very hot. This isn't a problem, but the next thing is really annoying.

  Whenever I'm not load, but the ethernet cable is connected, and MacBook goes into sleep mode, the system turns off instead. Thus, for example, when I don't have the power cable and if go for 5 minutes, the system automatically sets the mode 'sleep'. When I come back, it is turned off, and when I hit the power button, a black screen with the Apple logo and a text in several languages, saying that the system restarted because of a problem. After that, MacBook starts normally.

  The same phenomenon occurs:

  • When the power cable is not connected and I close the screen
  • When the power cable is not connected and I SLEEP manually the MacBook
  • When the screen is closed and I plug the power or the ethernet cable

  I use OS X 10.11.

  [1]: shot of lightning-Ethernet reduction ter http://www.apple.com/shop/product/MD463LL/A/thunderbolt-to-gigabit-ethernet-adap

  The SMC reset may help:

  https://support.Apple.com/en-us/HT201295

  Ciao.

• My 2011 iMac restart frequently with the error type Kernel trap problem 13

  Hi I have encountered this problem a lot these days. Today, I install a new version and it happened again. can someone help me solve this problem?

  Here are the details:

  Anonymous UUID: 53C8F40A-1638-DD34-1F16-54591B449BBA

  Game Mar 31 17:02:33 2016

  Panic report *.

  panic (cpu 0 0xffffff8028dd255a appellant): Kernel trap at 0xffffff80291331e4, type 13 = General protection, records:

  CR0: 0 X 0000000080010033, CR2: 0X000000010AA86000 CR3: 0X00000003FFF38081 CR4: 0X00000000000626E0

  RAX: 0XFFFFFF7FA9928206, RBX: 0X56415741E5894855 RCX: 0 X 0000000000000000, RDX: 0XFFFFFF805D225298

  RER: 0XFFFFFF9213A1B130, RBP: 0XFFFFFF9213A1B160, IHR: 0 X 0000000000000000, RDI: 0XFFFFFF805D225298

  R8: 0 X 0000000000000001, R9: 0XFFFFFF8060CD7960, R10: 0XFFFFFF9213A1B698 R11: 0XFFFFFF8060CDFC38

  R12: 0XFFFFFF805D225298, R13: 0 X 0000000000000001 R14: 0 X 0000000000000000, A15: 0 X 0000000000000002

  RFL: 0 X 0000000000010246, RIP: 0XFFFFFF80291331E4, CS: 0000000000000008, SS 0 X: 0 X 0000000000000010

  Lack of CR2: 0x000000010aa86000, error code: 0 x 0000000000000000, CPU error: 0x0, PL: 0

  Backtrace (CPU 0), frame: return address

  0xffffff81e7e26c50: 0xffffff8028cdf792

  0xffffff81e7e26cd0: 0xffffff8028dd255a

  0xffffff81e7e26eb0: 0xffffff8028df0233

  0xffffff81e7e26ed0: 0xffffff80291331e4

  0xffffff9213a1b160: 0xffffff802910431a

  0xffffff9213a1b210: 0xffffff802910294d

  0xffffff9213a1b260: 0xffffff8028f02e4a

  0xffffff9213a1b2e0: 0xffffff8028f02976

  0xffffff9213a1b320: 0xffffff8028f05f24

  0xffffff9213a1b350: 0xffffff8028f01a21

  0xffffff9213a1b3e0: 0xffffff8029103545

  0xffffff9213a1b510: 0xffffff8029112452

  0xffffff9213a1b6e0: 0xffffff8028ef661e

  0xffffff9213a1b7b0: 0xffffff8028ef5dc8

  0xffffff9213a1b8f0: 0xffffff8028f1d726

  0xffffff9213a1b9a0: 0xffffff8028f098d8

  0xffffff9213a1bbe0: 0xffffff8028f0a3f0

  0xffffff9213a1bf60: 0xffffff802922a731

  0xffffff9213a1bfb0: 0xffffff8028df0a36

  Corresponding to the current thread BSD process name: Finder

  Mac OS version:

  15 D 21

  Kernel version:

  15.3.0 Darwin kernel version: Thu Dec 10 18:40:58 PST 2015; root:XNU-3248.30.4~1/RELEASE_X86_64

  Kernel UUID: DECC9F02-27D7-31F0-9599-A9EF2873902C

  Slide kernel: 0x0000000028a00000

  Text of core base: 0xffffff8028c00000

  Text __HIB base: 0xffffff8028b00000

  Name of system model: iMac12, 1 (Mac-942B5BF58194151B)

  Availability of the system in nanoseconds: 1604043540975

  last load kext to 1230469000551: com.apple.driver.AppleXsanScheme 3 (addr 0xffffff7fabff9000 size 32768)

  Finally unloaded kext to 1305683739221: com.apple.driver.AppleXsanScheme 3 (addr 0xffffff7fabff9000 size 32768)

  kexts responsible:

  at.obdev.nke.LittleSnitch 4354

  com Apple.filesystems.smbfs 3.0.0

  com.apple.driver.AudioAUUC 1.70

  com.apple.driver.AppleHWSensor 1.9.5d0

  com.apple.driver.AppleBluetoothMultitouch 90.3

  com.apple.driver.AGPM 110.20.22

  com Apple.filesystems.autofs 3.0

  com.apple.driver.AppleOSXWatchdog 1

  com.apple.driver.AppleMikeyHIDDriver 124

  com.apple.driver.AppleMikeyDriver 272.51.3

  com.apple.driver.AppleHDA 272.51.3

  com Apple.Driver.pmtelemetry 1

  com.apple.iokit.IOUserEthernet 1.0.1

  com.apple.driver.AppleUpstreamUserClient 3.6.1

  com.apple.kext.AMDFramebuffer 1.4.0

  com.apple.iokit.IOBluetoothSerialManager 4.4.3f4

  com.apple.Dont_Steal_Mac_OS_X 7.0.0

  com.apple.AMDRadeonX3000 1.4.0

  com.apple.driver.AppleIntelHD3000Graphics 10.0.0

  com.apple.driver.AppleHV 1

  com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.4.3f4

  com.apple.driver.AppleSMCPDRC 1.0.0

  com.apple.kext.AMD6000Controller 1.4.0

  com.apple.driver.AppleBacklight 170.8.8

  com.apple.driver.AppleIntelSNBGraphicsFB 10.0.0

  com.apple.driver.AppleSMCLMU 208

  com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0

  com.apple.driver.AppleIntelSlowAdaptiveClocking 4.0.0

  com.apple.driver.AppleThunderboltIP 3.0.8

  com.apple.driver.AppleLPC 3.1

  com.apple.driver.AppleMCCSControl 1.2.13

  com.apple.iokit.SCSITaskUserClient 3.7.7

  com.apple.driver.AppleUSBCardReader 3.7.1

  com.apple.driver.AppleUSBStorageCoexistentDriver 3.7.1

  com.apple.driver.AppleIRController 327,5

  com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1

  com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0

  com.apple.BootCache 38

  2.8.5 com.apple.iokit.IOAHCIBlockStorage

  com.apple.driver.AirPort.Atheros40 700.74.5

  com.apple.driver.AppleFWOHCI 5.5.2

  com.apple.iokit.AppleBCM5701Ethernet 10.1.12

  com.apple.driver.usb.AppleUSBEHCIPCI 1.0.1

  com.apple.driver.AppleAHCIPort 3.1.8

  com.apple.driver.AppleACPIButtons 4.0

  com.apple.driver.AppleRTC 2.0

  com.apple.driver.AppleHPET 1.8

  com.apple.driver.AppleSMBIOS 2.1

  com.apple.driver.AppleACPIEC 4.0

  com.apple.driver.AppleAPIC 1.7

  com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0

  com Apple.NKE.applicationfirewall 163

  com Apple.Security.Quarantine 3

  com.apple.security.TMSafetyNet 8

  com.apple.driver.AppleIntelCPUPowerManagement 218.0.0

  com.apple.driver.AppleBluetoothHIDKeyboard 181

  com.apple.driver.AppleHIDKeyboard 181

  com.apple.driver.IOBluetoothHIDDriver 4.4.3f4

  com.apple.driver.AppleMultitouchDriver 304.10

  com.apple.driver.AppleHIDTransport 5

  com Apple.kext.Triggers 1.0

  com.apple.driver.DspFuncLib 272.51.3

  com.apple.kext.OSvKernDSPLib 525

  com.apple.iokit.IOSurface 108.0.1

  com.apple.iokit.IOSerialFamily 11

  com.apple.iokit.IOAcceleratorFamily2 205,1

  com.apple.driver.CoreCaptureResponder 1

  com.apple.iokit.IOFireWireIP 2.2.6

  com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.4.3f4

  com.apple.iokit.IOBluetoothFamily 4.4.3f4

  com.apple.driver.AppleHDAController 272.51.3

  com.apple.iokit.IOHDAFamily 272.51.3

  com.apple.iokit.IOAudioFamily 204.3

  com.apple.vecLib.kext 1.2.0

  com.apple.driver.AppleSMBusPCI 1.0.14d1

  com.apple.kext.AMDSupport 1.4.0

  com.apple.AppleGraphicsDeviceControl 3.12.6

  com.apple.driver.AppleBacklightExpert 1.1.0

  com.apple.iokit.IONDRVSupport 2.4.1

  com.apple.driver.IOPlatformPluginLegacy 1.0.0

  com.apple.iokit.IOSlowAdaptiveClockingFamily 1.0.0

  com.apple.driver.AppleThunderboltEDMSink 4.1.1

  com.apple.driver.IOPlatformPluginFamily 6.0.0d7

  com.apple.driver.AppleSMC 3.1.9

  com.apple.driver.AppleSMBusController 1.0.14d1

  com.apple.iokit.IOGraphicsFamily 2.4.1

  com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.7.7

  com.apple.iokit.IOBDStorageFamily 1.8

  com.apple.iokit.IODVDStorageFamily 1.8

  com.apple.iokit.IOCDStorageFamily 1.8

  com.apple.iokit.IOAHCISerialATAPI 2.6.2

  com.apple.iokit.IOSCSIBlockCommandsDevice 3.7.7

  com.apple.iokit.IOUSBMassStorageClass 4.0.2

  com.apple.iokit.IOUSBMassStorageDriver 1.0.0

  com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.7

  com.apple.iokit.IOUSBHIDDriver 900.4.1

  com.apple.driver.usb.AppleUSBHostCompositeDevice 1.0.1

  com.apple.driver.usb.AppleUSBHub 1.0.1

  com.apple.driver.AppleThunderboltDPInAdapter 4.1.3

  com.apple.driver.AppleThunderboltDPOutAdapter 4.1.3

  com.apple.driver.AppleThunderboltDPAdapterFamily 4.1.3

  com.apple.driver.AppleThunderboltPCIDownAdapter 2.0.2

  com.apple.driver.AppleThunderboltNHI 4.0.4

  com.apple.iokit.IOThunderboltFamily 5.1.0

  com.apple.iokit.IO80211Family 1110.26

  com Apple.Driver.corecapture 1.0.4

  4.5.8 com.apple.iokit.IOFireWireFamily

  com.apple.iokit.IOEthernetAVBController 1.0.3b3

  com.apple.driver.mDNSOffloadUserClient 1.0.1b8

  com.apple.iokit.IONetworkingFamily 3.2

  com.apple.driver.usb.AppleUSBEHCI 1.0.1

  com.apple.iokit.IOAHCIFamily 2.8.1

  com.apple.iokit.IOUSBFamily 900.4.1

  com.apple.iokit.IOUSBHostFamily 1.0.1

  com.apple.driver.AppleUSBHostMergeProperties 1.0.1

  com.apple.driver.AppleEFINVRAM 2.0

  com.apple.driver.AppleEFIRuntime 2.0

  com.apple.iokit.IOHIDFamily 2.0.0

  com.apple.iokit.IOSMBusFamily 1.1

  com Apple.Security.sandbox 300.0

  com.apple.kext.AppleMatch 1.0.0d1

  com.apple.driver.AppleKeyStore 2

  com.apple.driver.AppleMobileFileIntegrity 1.0.5

  com.apple.driver.AppleCredentialManager 1.0

  com.apple.driver.DiskImages 417.2

  com.apple.iokit.IOStorageFamily 2.1

  com.apple.iokit.IOReportFamily 31

  com.apple.driver.AppleFDEKeyStore 28.30

  com.apple.driver.AppleACPIPlatform 4.0

  com.apple.iokit.IOPCIFamily 2.9

  com.apple.iokit.IOACPIFamily 1.4

  com.apple.kec.Libm 1

  com Apple.KEC.pthread 1

  com Apple.KEC.corecrypto 1.0

  Model: iMac12, 1, IM121.0047.B23 of BootROM, 4 processors, Intel Core i5, 2.5 GHz, 16 GB, MSC 1.71f25

  Graphics card: AMD Radeon HD 6750 M, AMD Radeon HD 6750 M, PCIe, 512 MB

  Memory module: DIMM0/0 BANK, 4 GB DDR3, 1333 MHz, 0x029E, 0x434D534F344758334D314131333333433920

  Memory module: DIMM0/1 BANK, 4 GB DDR3, 1333 MHz, 0x029E, 0x434D534F344758334D314131333333433920

  Memory module: 0/DIMM1 BANK, 4 GB DDR3, 1333 MHz, 0x029E, 0x434D534F344758334D314131333333433920

  Memory module: 1/DIMM1 BANK, 4 GB DDR3, 1333 MHz, 0x029E, 0x434D534F344758334D314131333333433920

  Airport: spairport_wireless_card_type_airport_extreme (0x168C, 0x9A), Atheros 9380: 4.0.74.0 - P2P

  Bluetooth: Version 4.4.3f4 16616, 3 services, 27 aircraft, 1 incoming serial ports

  Service network: Ethernet, Ethernet, en0

  Network service: Wi - Fi, AirPort, en1

  Serial ATA Device: ST3500418AS, 500,11 GB

  Serial ATA Device: OPTIARC DVD RW AD - 5690H

  USB device: USB 2.0 Bus

  USB device: FaceTime HD camera (built-in)

  USB device: Hub

  USB device: My passport 0820

  USB device: Hub BRCM2046

  USB Device: USB Bluetooth host controller

  USB device: USB 2.0 Bus

  USB device: Hub

  USB Device: IR receiver

  USB Device: Card reader

  Bus crush: iMac, Apple Inc., 25.1

  According to the developers, uninstall Little Snitch.

• Help with Bus 7204VXR error

  Hello

  I got this router crash a few times a couple of days, but has collapsed since. Here is the HS worm showing the bus error:

  Cisco IOS Software, software 7200 (C7200-JK9S-M), Version 12.4 (3) VERSION of the SOFTWARE (fc2)
  Technical, support httpwww.cisco.comtechsupport
  Copyright (c) 1986-2005 by Cisco Systems, Inc.
  Updated Saturday, July 22 05 0911 by hqluong

  ROM system Bootstrap, Version 12.1 (20000710044039) [nlaw-121E_npeb 117], SOFTWARE DEVELOPMENT
  Software BOOTLDR of 7200 (C7200-KBOOT-M), Version 12.3 (26), VERSION of the SOFTWARE (fc2)

  7200vxr1 operating time is 2 days, 2 hours, 17 minutes
  System returned to ROM by bus to the 0x6084C0E4 PC error, address 0xFFF0 213620UTC MON Sep 12 2016
  Reboot system 213830 UTC MON Sep 12 2016
  System image file is disk0c7200-jk9s - mz.124 - 3.bin

  And here is the result of stacks of show:

  Minimum factory chimneys
  Name FreeSize
  DHCPD 1128012000 receive
  background charger 5913660000 script
  23123000 booklet allegro init
  41846000 update prst
  Error message 43086000 DIB
  Init 322012000
  51526000 RADIUS INITCONFIG
  22683000 rom randomly update
  TCP 3484436000 command
  Exec virtual 630812000
  5702460000 AFW_application_process

  Interrupt level piles
  Level gave the name of UnusedSize
  1 1044914134 74689000 network interfaces
  2 111040 85729000 DMATimer interruption
  3 0 90009000 PA Int management Manager
  4 736 86449000 console Uart
  5 0 90009000 OIRError interruption
  7 45261558 85729000 NMI interrupt handler

  System has been restarted by bus to the 0x6084C0E4 PC error, address 0xFFF0 213620 UTC MON Sep 12 2016
  7200 (C7200-JK9S-M) software, Version 12.4 (3) VERSION of the SOFTWARE (fc2)
  Technical, support httpwww.cisco.comtechsupport
  Updated Saturday, July 22 05 0911 by hqluong
  Image text-base 0x6000905C, database 0x62AB2000

  The failure of the system stack trace
  FP 0X65F31FA8, RA 0X6084C0E4
  FP 0X65F31FF0, RA 0X61F9AE00
  FP 0X65F32008, RA 0X61F8EA0C
  FP 0X65F32038, RA 0X61FD9F48
  FP 0X65F320A0, RA 0X61FD9A3C
  FP 0X65F320B8, RA 0X61FDC0E8
  FP 0X65F320D8, RA 0X61FBF4D4
  FP 0X65F32100, RA 0X61FC43D8

  I'm not sure if this is pointing to a hardware failure or if it's a bug in the iOS which caused the accident. Advice to get me in the right direction would be useful.

  Thank you

  Disclaimer

  The author of this announcement offers the information in this publication without compensation and with the understanding of the reader that there is no implicit or explicit adequacy or adaptation to any purpose. Information provided is for information purposes only and should not be interpreted as making the professional advice of any kind. Use information from this announcement is only at risk of the reader.

  RESPONSIBILITY

  Any author will be responsible for any wha2tsoever of damage and interest (including, without limitation, damages for loss of use, data or profits) arising out of the use or inability to use the information in the view even if author has been advised of the possibility of such damages.

  Poster

  Assuming that it's a software problem, and given your IOS version is early in the 12.4 train, you could just upgrade to a later version of 12.4.

• Firefox, playing videos with Adobe Flash Player restarts the computer without error.

  Try to play a video from any website with flash video restarts my computer with no error and no data in the event log. I disabled automatic restart in case of system error and got BSOD with the following data:

  Stop: 0x0000008E (0xC0000005, 0 x 00000000, 0 x 00000000, 0xAA3AB93C)

  Cannot find the error in Google.
  My version is more recent Firefox Nightly Build 27.0a1.
  Specifications of the computer:
  AMD Athlon 2700 +.
  ATI Radeon 4670HD
  C - Media CMI9738 (integrated mobo)
  1.5 GB OF RAM

  Flash player 11.9 r900

  Taking de.462, this old.

  So I just reinstalled again windows xp and the problem magically disappeared. Now, I have two activated accelerations and no reboot, no lag. THE POWER OF WINDOWS

• I keep having a problem with this error message. Firefox is already running but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system. I've tried everything.

  I keep having a problem with this error message. Firefox is already running but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system. I tried everything the internet suggested but it continues to wreak havoc... Help, please... John.I cannot give other details that it has become very annoying

  See "hang out":

  • http://KB.mozillazine.org/Firefox_hangs
  • Firefox crashes or does not - how to fix

• My iPad has completely turned off and cannot be restarted connect to iTunes on my Mac. He comes up with an error 3014 overtime and so can't do anything. Any ideas on what it takes then please.

  My iPad has completely turned off and cannot be restarted connect to iTunes on my Mac. He comes up with an error 3014 overtime and so can't do anything. Any ideas on what it takes then please.

  Looks like you have jailbroken your iPad.

  You must restore like new with another computer.

• Controller of domain and DNS behind RRAS without VPN connected directly to the internet with a Cisco router

  I hava a ME Cisco 3400 with physical single port available for a cable connection.

  The ISP give me an IP address interface = 89.120.29.89 to act as a gateway to the IP Address of the host, which is provided for in the order 89.120.29.90.

  The host computer is a dual Xeon computer with two NICs for LAN and WAN.

  Fields of application: to install a windows 2008 R2 between public and private network server.

  Even though I know it's not recomanded, I put the DNS role and directories Active Directory roles installed on the same computer, the computer above, (I do not have enough computer for roles different place on different computers)

  The desired configuration:

  To have installed with his roles behind a WS2008R2 has RRAS. without a VPN.

  b with VPN

  and for WAN access for the client computers of the private LAN Windows 7 OS. (The basin of LAN address 192.168.0.1 - 255).

  First step : to have internet access in the browser (I use Google chrome) (without taking into account the DNS and AD)

  Network configuration:

  Map NETWORK WAN, at the top of the stack of liaison in the Control Panel/network connections and sharing:

  Host IP: 89.120.29.90

  Mask: 255.255.255.252

  Gateway: 89.120.29.89

  DNS: 193.231.100.130 my ISP name server address.

  OK, I can browse the internet.

  Second stage. (Consider DNS and Active Directories)

  DNS instaled role for this computer.

  AD installed as a global catalog.

  NETWORK WAN server that is directly connected to the Cisco router:

  Conection area 3

  Properties:

  Client for Microsoft Netwaork: not verified

  Network Load Balancing: not verified

  File and shared printer: not verified

  QoSPacketScheduler: not verified;

  Microsoft Network Monitor 3 pilot: not verified

  IPv4                                                     ;  checked

  Pilot a Link Layer Topology Mapper i/o: checked

  Link layer Discover responder: checked

  IPv4 tab

  Host IP: 89.120.29.90

  Mask: 255.255.255.252

  Gateway: 89.120.29.89

  DNS: 193.231.100.130 my ISP name server address.

  under the tab advanced

  IP settings : even that, tab IPV4 with automatic metric check;

  DNS tab :

  Add primary and connection suffixes DNS specific: not verified

  Add suffixes primary DNS suffixes parents: not verified

  Add this DNS suffixes: no

  Registry deals with this connection in DNS: not verified;

  Use this connection DNS suffix in DNS registration: not verified;

  WINS tab : enable search LMHOST: not verified

  Enable NetBios over TCP IP: don't check;

  Disable NetBios on TCP IP: checked;

  Connection to the local network 2

  Properties :

  Client for Microsoft Netwaork: checked

  Network Load Balancing: no

  File and shared printer: checked

  QoS Packet Scheduler: not verified;

  Microsoft Network Monitor 3 pilot: not verified

  IPv4 checked

  Pilot a Link Layer Topology Mapper i/o: checked

  Link layer Discover responder: checked

  IPv4 tab

  NETWORK LAN CARD: 192.168.0.101

  Mask: 255.255.255.0

  Gateway: 192.168.0.1

  under Advanced tab:

  IP settings : even that, tab IPV4 with automatic metric check;

  DNS tab :

  Add primary and connection suffixes DNS specific: checked

  Add suffixes primary DNS suffixes parents: not verified

  Add this DNS suffixes: no

  Registry deals with this connection in DNS: checked;

  Use this connection DNS suffix in DNS registration: checked;

  WINS tab : enable search LMHOST: not verified

  Enable NetBios over TCP IP: check;

  Disable NetBios on TCP IP: not verified;

  Install RRAS as NAT (NAT) under any condition imposed by DHCP(not installed) in ideea that RRAS will generate the private IP address of the DHCP allocator.

  In any case, for the beginning, I have a fix IP, do not get IP automatically.

  At this point, it gets the configuration simple posible for RRAS follows:

  3, LAN connection that corespond to the WAN interface IP:

  "NAT configured for the following Internet interface: Local Area Connection 3.
  The clients on the local network will assign the IP addresses of the following range:

  network address: 192.168.0.0. netmask 255.255.0.0.

  After Windows RRAS are open:

  The Network Interfaces tab:

  NICs are enabled and connected;

  UAL remotely & policies:

  Launch NPS,

  on the NPS server tab:

  Allow access to successful Active Directory directories:

  Properties: authentication: port 1812,1645

  kept port 1813,1646;

  on the accounting tab: nothing;

  under NPS policies:

  Grant permission for the RRAS server under builin\Administrator of the accounts;

  On strategy and the type of server unspecified (NAT do not exist as an entry in the drop-down list server dwn)

  under the static road: nothing;

  under the IPv4 tab or both are there(there IP) and are up

  under NAT

  Connection to the local network 3: public interface connected to the internet

  enable NAT on this interface:

  under the address pool: ISP addresses public;(two addresses)

  under the terms of service and the ports: Web server: http 80.

  (I have I have a static IP address for the client computer in mind, I set up a single customer).

  At the client computer :

  configured as domain customer and added to the users AD and computer AD

  logon to the domain:

  Local Area Connection

  Properties:

  Client for Microsoft Netwaork: checked

  Network Load Balancing: not verified

  File sharing and printer: checked

  QoS Packet Scheduler: checked;

  Microsoft Network Monitor 3 pilot: not verified

  IPv4                                                     ;  checked

  Pilot a Link Layer Topology Mapper i/o: checked

  Link layer Discover responder: checked

  IPv4 tab

  Host IP: 192.168.0.101

  Mask: 255.255.0.0

  Gateway: 192.168.0.1

  DNS: (auto-add the same to the local machine).

  under the tab advanced

  IP settings : even that, tab IPV4 with automatic metric check;

  DNS tab :

  Add primary and connection suffixes DNS specific: checked

  Add suffixes primary DNS suffixes parents: not verified

  Add this DNS suffixes: no

  Registry deals with this connection in DNS: checked;

  Use this connection DNS suffix in DNS registration: checked;

  WINS tab : enable search LMHOST: not verified

  Enable NetBios over TCP IP: checked;

  Disable NetBios on TCP IP: not verified;

  right now the 192.168.0.101 client cannot connect to internet through RRAS.

  ;

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Attempt to connect wi fi on my Dell computer, running windows XP? Have DSL but not Ethernet. Faced with problems. Checked with CISCO router but not help there. CANY anyone help

  I have a problem connecting to a Cisco E100 router to my computer. My count (office) does not have a wireless. I have DSL from. Cisco tells me to plug a router using Ethernet cable to connect. I don't have an Ethernet connection on my computer. At present I have USB connect the computer to the Westell modem.  Can anyone help? I hope this is enough information. Basically what I'm hoping to do is to install the WiFi so I can use a tablet now and maybe a laptop this last on.

  Thank you

  On the routers only house you can use USB connections are those provided by some ISPs.  An Ethernet connection between the router and the computer is far more preferred.

  Your router a Cisco E1000 or is it really E100 (I thought that Cisco makes a model with this designation not)?

  It is quite surprising that you don't have an Ethernet connection that is built into your computer.  What is the complete model number (or, preferably, the Number of Service Dell)?

  Open the Device Manager (start > run > devmgmt.msc > OK).  Expand the "Network card" category by clicking on the + next to him.  What devices are listed in this category.

  If you don't really have an Ethernet or an adapter wireless built into your computer, you can add one, using a PCI internal (if you have a desktop/Tower computer) or external (PC card for laptops) or USB to laptops or desktop/towers.

  Also, the normal configuration is to connect your DSL modem to the router and then the router to the computer.  If your Westell modem has an Ethernet connection, you must use your new router in a non-standard configuration.  Even if the Westell modem has an Ethernet port, you may need to do some reconfiguration for her as well.  What is the complete model of the Westell modem number?

• So that the supply of machinery of vCenter.  Fails on the customization of operating system prompted with the error "windows could not complete the system configuration to try to resume the computer restart configuration.

  Sysprep from Windows fails with the error while the supply of machinery of vCenter. "windows can not finish the system configuration to try to resume the computer restart configuration.

  I use vmware vcenter spec customization here,

  I'd say it's because of incorrect permissions or corrupted registry entry or registry that exceeds 8 KB.

  Please visit https://social.technet.microsoft.com/Forums/windows/en-US/658528ce-6eb5-403b-ae41-458147c2c044/sysprep-failling-after-reboot-into-oobe

  Also change to vmxnet3 NIC and install vmware tools and try cloning.

  "

  ) More than 8 k

  (b) set incorrect permissions

  (c) corrupted somehow

  For me, the problem was intermittent (same registry key would sometimes cause the issue and sometimes not - must be corrupted sometimes) so it was impossible to tell what program it was.  Fortunately, there is a newspaper, you can watch that will tell you exactly what registry key is slightest mistake out.  Here are the steps to get the newspaper, you must see:

  When you see the error message, follow these steps:

  1.) press SHIFT + F10 to get to a command prompt

  2.) stand C:\windows\Panther

  3.) find the Setup.etl file and find a way to copy this file out of the system (I copied it to the partition D:\ and Ghost used to collect this partition and down the file)

  4.) copy the file to another computer that has Windows 7 setup.etl corrupt system.  Place it at the root of C:\ for easier access.

  5.) open a prompt on the Windows 7 computer.

  6.) navigate to the root of C:\ (or anywhere where you saved the file)

  7.) type "tracerpt setup.etl o logfile.csv.

  8.) close command prompt and open logfile.csv in your text editor of choice.

  9.), look in the log file (near the end, probably) for messages that say "Failed to key"reg"process or one of its descendants" to me, the exact eror looked like this: "failed to process the"reg"key or one of its descendants: [profile \REGISTRY\MACHINE\SOFTWARE\ESET\ESET Security\CurrentVersion\Plugins\01000200\Profiles\@My] ' If you search for"«key reg"' or «failed in the process»»» You should find the failure.

  10.) remove this software from your image, or how to get the registry key that does not work properly.

  After that, you should be able to correctly identify any key problem and the elimination/workaround on your image.

  "

• All of a sudden my 5.7 LR on win10 64-bit start fails with the error message something like "error reading from the cache of the preview... Please restart." reboot, repair, reinstall, or rename SLCache helps to repair.

  All of a sudden my 5.7 LR on win10 64-bit start fails with the error message something like "error reading from the cache of the preview... Please restart." reboot, repair, reinstall, or rename SLCache helps to repair.

  

  Hello

  Greetings!

  Close to Lightroom.
  Navigate to the location where the catalog is present (default value is within the pictures folder lightroom file)

  And delete the file previews.lrdata.

  Note: do not delete the catalog with the extension .lrcat file.

  Concerning

  Jitendra

• Cloud to adobe InDesign download fails with shoing error it can not extract the files in the temporary file.  I tried several times and restarted does not.  What can I do about it?

  Cloud to adobe InDesign download fails with shoing error it can not extract the files in the temporary file.  I tried several times and restarted does not.  What can I do about it?

  To refer to EX11 some:

  Creative cloud (WIP) error codes | Error postal codes of Mylenium

  Mylenium

• Latest installer called "17au your" crashes with a bus error.

  Hey, the most recent Flash Installer immediately crashes with a bus error when I try to launch it. I don't know how to solve this problem outside waiting for the automatic update and see if that fixes the problem. Does anyone have an idea how to solve this problem, or how report a bug?

  Thanks, I tried the installer suggested your link who worked offline and appears as 17.0.0.188 in system preferences.

  I had the installer on this machine with 10.6, but I never downloaded this manually from Adobe. An Adobe apeared pop up when I was using the browser to view flash content (television network), telling me that a new version is available. I put in place of Flash preferences to enable automatic updates, but it seems to somehow always suggest me to do with this pop-up window instead.

  I think remember that the automatic update is delayed by a few days, so I usually go for the install on the pop-up button.