Dashboard - not automatically runs the analysis

Similar Questions

• Windows could not automatically bind the Protocol IP on the network card stack.

  Hello

  I installed an Edimax EW-7718Un network adapter that does not connect to the internet. I installed the same device on my Windows Vista laptop and it works fine, this isn't a problem with the product or my BT Home Hub. I checked the Edimax website and this product is compatible with Windows 7, and I have the latest drivers for it. I did the following to try to resolve the problem:
  -I've already been on the adapter properties, and clicked on "update drivers", the system says that the network card is working properly and that the drivers are up to date. I also installed the latest drivers on the Edimax website but the issue is not resolved.

  When I solve the problem, he told me that "Windows could not automatically bind the IP protocol for the network card stack."

  Please note that the settings are correct as the TCP/IP and DNS are set on "automatically get an IPv6/4 address server / DNS automatically".

  Also of note is that in "Network connections" in the Control Panel, the device is listed as "Disabled", I click to activate it but it does nothing, the network connection is still disabled. When I click on "analyze what" the same message "Windows could not automatically bind the IP protocol stack to the adapter network." appears.

  I also have compeltely re-installed Windows 7 and use the system restore, neither worked.

  I hope you can solve this problem.
  Thank you
  Mickey

  Hi Mickey888,

  According to the information provided by the Edimax website this particular model supports up to Windows Vista only.

  http://www.Edimax.us/HTML/English/products/EW-7718Unspec.htm

  You can try to install the same in compatibility mode and see if that solves the problem. To run the troubleshoot compatibility utility follow the link below.

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Win7x64 with adapter DWA-160, "Windows could not automatically bind the IP protocol for the network card stack."

  As the title suggests, I am running Windows 7 family, 64 bit. This is a new installation, a few days ago and I have not installed anything on, or changed the settings.

  I installed a DWA-160 D-link Wireless adapter n with the current drivers, fix (before you ask to confirm, they come from Web site of D - link. I used initially the disk included in the box, however, this has generated the same question that I'll explain, so I uninstalled this software and has continued to use the Windows program to connect to the wireless network.

  I can connect to the network, of course; However, I get the message "Windows could not automatically bind the Protocol IP on the network card stack" when connecting each time.

  After searching for an answer, I tried to turn on the WLAN auto configuration service, however, it is enabled by default. If this isn't any help.

  Tried the netsh winsock / netsh int ip / netsh int ipv4 / netsh int ipv6 reset and restarted after each, no change, if this isn't any help.

  Made sure the problem wasn't with the wireless router, and it isn't because I can connect with my laptop.

  Tried to plug in the USB stick on another computer yet. I don't want to plug into my laptop just to test that possibility. So. Yes.

  I also don't know much about all the inner workings of one of these things, so it would be rad If everything was in one step by step. Thanks in advance.

  Try to run This Fix - It.

• Window can not automatically detects the network proxy settings

  Original title: window could not automatically detect the network proxy settings
   
  Windows network diagnostics says constantly "" window could not automatically detect the network proxy settings"" How can I fix it I have a Windows laptop, 8 and I can't use the internet, most of the time, but the internet bars are full and there is no yellow triangle with a! next to him.  Usind Ethernet instead of WIFI makes not much difference if you please, help.

  

  

  Hello Sarandeep Singh,

  Thanks for your reply Sarandeep. Now, this problem has been resolved. I that follows the steps of: https://support.microsoft.com/en-us/help/15287/windows-why-can-not-get-connected ( run Networking command after using the convenience store network )

  Thanks again.

• update date and time for 3.6 numbers does not show the time and does not automatically update the date

  The 'update date and time"for numbers of 3.6 does not show the time and does not automatically update the date.  What should I do?  Thank you.

  Hi david,

  where do you find ' update of the date and time.

  Quinn

• MS Money 2005 - I rebooted the software, but it does not automatically download the update needed to read my existing data files

  Due to a hard drive crash, I had to reformat my hard drive,
  therefore lost my copy previous update of MS Money.
  I reloaded the software from the CD, but it does not automatically download the update needed to read my existing data files.
  Can someone help me read my old data files?

  Microsoft or anyone have made available as a patch to download?

  Hi Derek,.

  Since the problem is related to Microsoft Money, I suggest you post your question on the Forums of money from Microsoft.

  Microsoft Money Forum

• Windows could not automatically detects the network proxy settings

  Recently, I noticed a triangle appearing little attention with my network icon in the taskbar. When I right click and solve problems, it comes with this message. Windows could not automatically detect the network proxy settings. My internet has been really slow lately, but I wonder if there is a problem with my network? or is - something that my ISP has set?

  (This message is intended for all problem reports)

  Check the Internet Options (Internet Explorer tools or configuration panel / /Connections Options tab / LAN Settings and make sure that Proxy Server is not checked even if you use Firefox.)  Check the settings in Firefox Tools / Advanced connections / settings (should be use system proxy settings or no proxy).

  Search for malware, especially using malwarebytes.

  Try these commands in this order in an elevated command prompt.  Not the first first, then reboot and try.  If still bad, try the second.

  netsh winsock reset
  netsh int ipv4 reset

  If they do not help, please after the output of a command ipconfig/all-order

• When you try to export data into a program that we use, it does not automatically recognize the file as .xml format. Anyone know what I can do to fix this?

  I tried to uninstall version 3.6 and reinstall. Also, I provided in the workstation image, but it still does not work. The OS is Windows 7 32 bit. This process runs automatically on a XP workstation. In fact, the machine that I've reconfigured was a XP box, but it did not work on this particular machine. Therefore, the reason for the new image.

  See:

  • http://KB.mozillazine.org/File_types_and_download_actions

• Is it possible to set up the video so that it does not automatically change the slide master?

  Hello everyone. Is it possible to not have the video of Captivate automatically running but to manually edit slides, better with buttons? I could not find how do. This is because I would like to use interactions and if the video works as ususal, when the time of the slide is expired are therefore possible to click on the buttons of interactions and, on the contrary, if we want to ignore the slide before that time that is expired, they must click on the next button, and then the play button too complicated! So the best way would be to have an installer of the manula transition. Could you help me with this? Thank you very much. Maurizio

  No, it seems to me it's OK

• NB500-108 does not automatically select the boot device

  Hello

  When I start the computer (NB500-108), it gets as far as the "Toshiba Leading Innovation" screen and stops. It will allow me to select F2 and F12, but I have to do it EVERY time I start the computer. It seems that it will automatically select the HDD/SSD drive and I can't find in the start menu anyway to fix this problem.

  I tried running repair of the boot from the Windows 7 repair disc and even if it is said that there is no problem, I would consider it a problem.

  Any help would be greatly appreciated.

  Thank you

  I have same NB520 and I ve never done in this situation.
  Try it please to the value of the default BIOS and check if the problem persists.

• TMS Provisioning, does not automatically synchronize the AD user

  Hi all

  I have a problem with a repertoire of Provisioning TMS which are synchronized with the directory of the AD.

  If I manually start sync, that works very well.

  I see in the Info that will be the next time you start 04:00, but it is not synchronized with the ad automatically, only works manually.

  Does anyone have an idea where I can find the log that records this synchronization.

  I also know that this time is not editable, it is perhaps possible in the NMR netx 13.2 with extension 2.0 Provisioning?

  Thanks for any input

  Best regards

  Georg

  Hi Georg

  Try this:

  USE TMSNG

  SET IDENTITY_INSERT [dbo]. [SchedulerEvent] WE

  INSERT INTO [dbo]. [SchedulerEvent] ([Id], [EventServiceName], [EventServiceDLL], [PrimaryServerId], [start], [CancelTime], [ExpireTime], [status], [SchedulerRuntimeStatus_Id], [priority], [progress], [EventDescription], [Settings], [EventLog], [ReoccurenceRule], [RestartTime], [AllowGUIDelete], [ExternalEventId], [RejectList], [Owner_aclUser_Id], [SendSuccessEvent], [SendFailureEvent], [LastEventLogEntry]) VALUES (12, is Tandberg. TMS. Service.TMSAgent.TMSAgentUserImportEventHandler', N ", N", ' 26-06-2009 04:00 ', ' 2009-06-26 16:00 ', ' 2109-06-26 04:00 ', N 'Log_All_Pending', 1, 1, 0, not Log_ScheduleUserImportEventHandler_Description |', N ", not 2009-06-26 09:05:52 | Log_Settings_Created', N 'EVERY1DAY', ' 2009-06-27 04:00 ', 0, NULL, NULL, 1, 0, 0, N ");

  SET IDENTITY_INSERT [dbo]. [SchedulerEvent] OFF

  This should trigger it to start automatically.

  And no, you cannot set the time in the new model of commissioning.

  / Magnus

• NOT BETWEEN in the analysis filters?

  Hi all

  My requirement is to create a business where the filter is NOT BETWEEN two dates. Any ideas how? I use OBIEE 10 g.

  Thanks in advance.

  Kind regards

  Enric

  Enric salvation,

  There might be an easy way to do it, but I had developed similar sort of solution in the past, I'm trying to explain it further. Please try it and let me know if it works.

  There will be 4 different catalog objects in this solution.

  1. dashboard invites
  2 answers - Dates Temp
  3 answers - second series of report INTERSECT
  4 answers - first series of report INTERSECT

  1. guests dashboard: create this prompt like Dates BETWEEN
  2 dates of temp: take the same DATE column used in the dashboard quickly twice in the report. Filter columns 2 and the value "is requested. Get MIN Column1 date (START DATE) and MAX date of Column2 (END DATE).
  3 report of second Set of INTERSECTION: create this report with all the columns and filters which are necessary and add an advanced filter "Filter based on the results of another application" to date columns to add the solution of Christian Berg that is use X <(=) date1(start="" date)="" or="" x="">(=) Date2 (END DATE).
  4 first report of the value of INTERSECTION: create this report with all the columns and filters which are requrted and add an advanced filter 'Filter based on the results of another application' to filter KEY columns using the above created results report (step 3). Don't forget the Date in the report filter is just "is invited".

  It will be useful.

  Kind regards

  Kalyan Chukkapalli

  http://123obi.com

• vCenter service starts do not automatically after the server restarts

  Hello

  We use vCenter Server 5.5.0 build 1476327 installed by using Installation Mode on Windows Server 2008 R2 with SQL 2008 R2. All SSO, inventory service, vcenter, customer web etc, are on the same server.

  VCenter server service is set to automatic (startup type), Local System (connect as). However at the restarting windows server vCenter, vcenter service does not automatically start and it gives error in the vpxd.log below. But if we manually start the services vcenter, it works very well.

  2014 02-12 T 17: 38:49.186 + 05:30 [03016 info 'utilvpxdVdb'] [VpxdVdb::SetDBType] connect to DSN: VC55DB with username vpxuser

  2014 02-12 T 17: 38:55.750 + 05:30 [03016 info 'Default'] [VdbSchemaLoader::LookupSchemaFromDB] loaded schema information and DB index

  2014 02-12 T 17: 38:59.586 + 05:30 [02036 WARNING opID "VpxProfiler" SWI-6058ed8 =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12094

  2014 02-12 T 17: 39:12.034 + 05:30 [02040 WARNING opID "VpxProfiler" SWI-56f32f43 =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12448

  2014 02-12 T 17: 39:24.094 + 05:30 [02036 WARNING opID "VpxProfiler" SWI-31169898 =] VpxUtil_InvokeWithOpId [TotalTime] took 12059 ms

  2014 02-12 T 17: 39:36.549 + 05:30 [00928 WARNING opID "VpxProfiler" SWI-6a5d128c =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12451

  2014 02-12 T 17: 39:48.618 + 05:30 [02036 WARNING opID "VpxProfiler" SWI-6d7d4b3 =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12045

  2014 02-12 T 17: 40:00.625 + 05:30 [00928 WARNING opID "VpxProfiler" SWI-55e83917 =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12007

  2014 02-12 T 17: 40:12.994 + 05:30 [02040 WARNING opID "VpxProfiler" SWI - 3113 c 398 =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12251

  2014 02-12 T 17: 40:25.196 + 05:30 [02036 WARNING opID "VpxProfiler" SWI-35702e2f =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12001

  2014 02-12 T 17: 40:37.852 + 05:30 [00928 WARNING opID "VpxProfiler" SWI-4b63962d =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12646

  2014 02-12 T 17: 40:49.875 + 05:30 [02036 WARNING opID "VpxProfiler" SWI-6c4f3258 =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12019

  2014 02-12 T 17: 40:56.287 + 05:30 [03016 info 'Default'] judgment of VMware VirtualCenter forcing now

  Check connectivity ODBC (SQL authentication), looks very good. Don't know what are these VpxProfiler warnings in the newspaper, after which the VirtualCenter is forced to stop.

  Please advise on this.

  Thanks in advance!

  Try to set the vcenter service in Automatic (delayed start mode) leave the sql first service started. to the Webcomic.

  hope it will settle your error. same problem I faced and fixed in this way.

  Thank you.

• Dual boot MacBook running Win as host, not to run the Mac partition as a virtual machine?

  Sorry if this has been requested a lot of times before, it was difficult to try to sift through responses to this particular configuration through research.

  I have a MacBook which double - start by training camp.  I generally run Windows but do have occasional need to pop in Mac.

  Is there a way to get my Mac running as a virtual machine in Windows partition?  I've seen a lot of discussion of the scenario opposed using Mac and Fusion, but not found on my installation.

  Thanks in advance for any help, especially if it's the ten thousandth time it was requested.

  Within the limits of your question, it is not supported by VMware.  That means that the only product from VMware that supports the legal vitualization of legally virtualisables versions of Mac OS X is VMware Fusion when run under Mac OS X on a Mac to processor Intel.

  In addition, if it's not Mac OS X Server 10.5, 10.6. 10.7 or Client Mac OS X 10.7, so he is not allowed by the Apple ALS and cannot therefore be discussed in these forums without violating the terms of use of the VMware community.

• Pavilion E017DX: Keyboard Pavilion E017DX will not automatically detaches the Instructions in the manual will not work

  (It is not relevant to OS)

  I have very very alert followed the instructions in the manual 'for laptop HP Pavilion 17"downloaded from the HP website.

  There was no ambiguity on the two screws to remove to release the keyboard.

  However, after releasing their (and, of course, carefully following all prior instructions as well), the keyboard will not loosen, it remains as tight as a tick and is not even remotely let go.    All that happens when I "insert a thin tool into the output port of the keyboard and press the back of the keyboard" as indicated in the manual is that the "." key (period) comes off!

  There is also a hole size of finger under the WLAN (not mentioned in the manual) that is labeled clearly communicated keyboard (engraved on the metal).    Pushing hit as firmly as possible without risk of breaking the computer accomplishes absolutely nothing.    The keyboard still not loosen.

  Something seriously missing in the instructions and/or the design of this computer is seriously insufficient.   My next computer will not be a HP.

  PS: I got a lot of experience in the repair of laptops of all kinds.  Lack of familiarity with the technology of the laptop is not the problem remotely.

  Usually, you will have to lift the loose keyboard around the edges while pushing from the rear. I hope that this video will help: Remove keyboard

  If you found my answer helpful please say thank you by clicking on the icon cursor.

  If my answer has solved your problem please mark as the "acceptable Solution". Thank you!