Dashboard reports a SMART with i100 32 GB error

Similar Questions

• IE8 and it just started with a lot of error reports and custom back to the home page

  Well for a reason my first thread is not here so Im start again, I have IE8 and it just started with a lot of error reports and custom back to the homepage it just on the same page of the article, I was reading and said that this tab was recovered, I end up having to close on restarting the program n also since I reloaded my xp cd my sound got rough n jumps, it was well before I did this if Im not sure what to do. Im not exactly smart pc and am afraid of doing something wrong then Im left to do very limited things, any help would be appreciated

  Hello mikegrimesWQ,

  Because it looks like you have reinstalled Windows XP, what happens when you turn on your computer?  Windows loads correctly and allow you to connect with success?  Have you completed all the updates of Windows since the relocation?  Do you get errors at any time?

  What version of Windows XP you are using and which service pack is currently installed?  I would say confirming all your drivers are recognized and updated.

  How to download updates that include drivers and hotfixes from the Windows Update Catalog

  Please let us know status.

  Thank you

  James

• How to export Excel dashboard reports in OBIEE 11.1.1.6.0?

  Hi Experts,
  
  How to export Excel dashboard reports in OBIEE 11.1.1.6.0?
  For example:
  Dashboard contains more than one report and add an export button for downloading these reports to Excel.
  
  Is it possible to implement this requirement? Thank you.

  There is no direct option, you can try the following workaround.

  Option-> Print-> page printable Html

  Then the file-> Save Page as

  Pharmasset Save as type as it is-> all files
  File name as Report.xls

  When you open the xls file, if you get a pop up saying problem during a load simply omit it and move forward.
  The report opens in excel.

  Or save the page as html /mht and open it with Excel, it works too.

  Note: I tested this in Mozilla

  Thank you
  Vino

• Dashboard report of the Commission, which gives a line empty?

  When you run a dashboard report, I don't want to see the report until I have something in the prompt. To do this, I tried the following steps, but it still works a blank report with a blank line.
  
  1. for my first guest I have to 'default' as a "Specific value" and gave a value that isn't in the database, in other words if I run the query on SQL Developer, it will give me no line.
  2. my dashboard has two sections, section 1 contains the guests. In Section 2, in properties, I have been guided Navigation and selected, 'Reference Source application' Yes. Request for source I am that it points to the location. See, I have chosen "If query returns lines."
  
  BUT this does not work, I still get a blank line. What I lack, or is there another way to address the issue. Thanks for the help.

  Add three columns, by using the IFNULL function on each column.

• Change the sequence of commands to generate two reports by USE with different names.

  I have a special situation for the model of batch processing.

  Each DUT consist of two distinct products that need to be tested as a single unit.

  I can run every USE and generate a test for each report.  -aka. The standard use case works very well.

  However, we would like the records using this method. So I need a copy with a different name for each series.

  The idea behind this is that we have a story running for each half of the UUT. Given that the two halves will probably never meet.

  I looked at the BatchModel.seq and read some of the documentation, but I'm having a hard time to understand what is happening.

  

  I guess the items highlighted above are where the object to measure reports are generated. However, I don't know the mechanism for giving them the names among the Options report-> report menu Pathname file or how to change between these two points in time. Also are there tricks to get the report in duplicate with a different path in this configuration.

  All links to the relevant information would be useful. Thank you

  Just copy these two steps and between them and the copies have another step that is just a statement.  There, you can change the path of the report by setting parameters. TestSocket.ReportFilePath the new path.

  Ideally what you would do, is that the client using a callback.  So, your code would look like this:

  Write the object to measure report

  Write the report of the object to be measured (on the fly)

  Define report path reminder (override in customer OR statement step)

  Write the object to measure report

  Write the report of the object to be measured (on the fly)

  Hope this helps,

• CanoScan 88ooF error report, "cannot communicate with scanner.

  When I try to use my scanner I get the error report, "cannot communicate with scanner, make sure it is plugged and truned on.» When I go into Windows Device Manager I can see it, and when I click on the buttonn properties, it says that the device is functioning properly. I downloaded the latest version of the software driver etc and I uninstalled and re installed again but I still get the same error report.

  I use Windows 7, 64-bit version.

  

  Above is I get the error message.

  After two days of fruitless efforts, I found my own solution. I downloaded and installed VueScan x 64 and it works a treat. I think that the problem I've been is due to the fact that the scanner driver is 64-bit and the programs that install are 32-bit, even if the scanner driver works perfectly fine 2 bit programs do not see.

• Choose report full slip with warning

  Dear all,
  
  When I try to choose the lines in standard SO, choose report full slip with warning.
  
  I tried the solutions existing in metalink, but not resolved.
  
  can someone help me solve this problem.

  Please see the rule, it must be some badly made configuration.

• How can I adapt the decision XML report that comes with a warning event?

  Through the web determinations warning events can be used.
  
  To make visible warning events in the response following XML must be added to the XML query:
  
  < typ:show - events > true < / typ:show - events >
  
  
  
  When a warning event is present in the XML response I also get a report of decision with report-style = 'basic attributes.
  
  When many warning events are present in the output XML file, this has a negative impact on performance.
  
  It's the reason I'm looking for a possibility to delete or configure the standard decision report that comes with a warning event.
  
  Is this possible?

  You can make smaller decision reports by setting the "silent" or "Invisible" option on attributes (see 'Hide information in a record of decision' in http://docs.oracle.com/html/E38269_01/toc.htm the political Oracle © modelling User Guide)

  It's really the only option to change the records of decision.

  See you soon
  Frank

• where can I report a problem with a virtual machine died, which I can't save now?

  It looks like a lot of places, but it is not clear where I should take this problem to.

  where can I report a problem with a virtual machine died, which I can't save now?

  He is buried in the VMware Community Infrastructure - here is the link to this forum - http://communities.vmware.com/community/vmtn/server/vi/esx3.5

• My dashboard can be shared with other users?

  Hi all
  
  The first page showed is "My dashboard" after logon BI web system, so I want to use "My dashboard" as the home page. But seems my dashboard cannot be shared with other users, or are there other methods to implement a common home page?
  
  Thank you
  Dan.

  Hi Dan,.

  Access my dashboard
  -> connection with Administartor-> dashboard-> settings-> Administration-> manage privileges-> catalog Personal Storage (my files and my dashboard)
  Add users to view my dashboard and finished

  My default dashboard

  Dashboard-> settings-> my account-> select dashboard as my dashboard under preferences

  See you soon,.
  Aravind

• Download option on the dashboard report

  Hello
  
  I have a report saved in OBIEE under dashboards. If I open the report in the responses, I have the option to download at the end of the screen, and I can upload it to Excel. When I opened the same dashboard report, I am not able to. Is it possible for me to download the report from dashboards.
  
  Thank you.

  Ah ok... Now I see where your problems.
  You encounter a link and a link you can not have the download option.
  The only way you can achieve it is:

  Remove the link.
  Drag the report rather than the link.
  Go to the properties of this report.
  Select the display of the results.
  Chosse is a link in the table of edge/link in a new window.
  Now, select the link for the report and select the download option. Save your dashboard and see the download now button.

• How to view the zero in the dashboard reports when there is no data in the database?

  I'm generation of trend analysis report
  
  in which I not show. so each month on a site web, I have all the data for a given month July (because there is no success during the previous month), report is generated with all months except JULY.
  
  Is their any way to view the zero with the name of the month when there is no data (unsuccessfully) in the database?
  
  ex.
  Jan 10
  20 February
  15 March
  Apr 4
  May 12
  June 16
  July 0 <---(display zero here)
  August 11
  9 sep
  .
  .
  Dec 8

  You owe us an outerjoin:

  http://obiee101.blogspot.com/search/label/outer%20JOIN

  concerning

  John
  http://obiee101.blogspot.com

• reporting on accounts with or without activities

  I need to create a report that contains the accounts with or without activities. The one that I chose in the reports only details ("activities") accounts section that contains some activities.
  
  I need the report not only with accounts that are already in contact, but also accounts which has not yet been contacted.
  
  Kind regards
  
  Dominik

  You must use the combined analysis.

• SMART short Self Test Failed - (error code: WHD16-8NR)

  Hi all

  I had my XPS L520X for 4 years and 2 months. I've never had a problem with its operation until last week. Randomly, it restarted and came with the PCI Realtek issue when it restarts.

  To cut a very long story short Fault find it which is going on, I reinstalled the entire operating system, including formatting of the hard drive.

  The problem of the laptop different freeze/crash and reboot with erros while doing normal tasks has not been resolved.

  I have run the Dell support center software and it shows the auto SMART test failed with the following code (error code: WHD16-8NR).

  Event log:

  Dell Support Center log file
  March 17, 2016 16:53:55
  Overall result: failed

  -------------------------------------------------------------------------------------------------------------------------------------------
  ST9750420AS [ATA:0:0\\?\ide#diskst9750420as___0005dem1#4&34e0611c&0&0.0.0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b]}
  -------------------------------------------------------------------------------------------------------------------------------------------

  Seller: Seagate
  Model number: ST9750420AS
  Serial number: 6WS100EG
  Firmware revision: 0005DEM1
  Size: 698,6 GB
  Rotation speed: 7200 RPM
  Cache size: 16 MB
  Temperature: 43 c
  Physical sector size: 4 KB
  Logical sector size: 512 B
  Count of logical sector: 1465149168
  Supported standards: ATA8-ACS, ATA/ATAPI-7, ATA/ATAPI-6, ATA/ATAPI-5
  Specification Version: Rev ATA8-ACS 4

  ----------------------------
  OS - C: [PARTITION:C\\.\C:\]
  ----------------------------

  File system: NTFS
  Volume serial number: 5087-8802
  Volume capacity: 679.00 GB
  Amount of free space: 568,63 GB
  Volume space used: 110,37 GB

  Test of the SMART State

  Test started - 17/03/2016 16:43:57
        
  Finished test:-17/03/2016 16:43:59
  Past

  Test of SMART thresholds

  Test started - 17/03/2016 16:43:59
        
  Finished test:-17/03/2016 16:44:01
  Past

  Targeted reading test

  Test started - 17/03/2016 16:44:01
        
  Finished test:-17/03/2016 16:44:05
  Past

  Try to search randomly

  Test started - 17/03/2016 16:44:05
        
  Finished test:-17/03/2016 16:44:54
  Past

  Funnel Seek Test

  Test started - 17/03/2016 16:44:54
        
  Finished test:-17/03/2016 16:46:14
  Past

  Short what SMART self-test

  Test started - 17/03/2016 16:46:14
        
  Error message:-17/03/2016 16:46:24
  The unit has reported the following State: the previous self-test completed having the read element of the test failed.
  Error message:-17/03/2016 16:46:25
  The first default LBA value is 121243744 and the failure occurred after that the device was working since 8792 hours under tension.
  Finished test:-17/03/2016 16:46:26
        Failed (error code: WHD16-8NR)

  Surface Scan Test

  Test started - 17/03/2016 16:46:26
        
  Finished test:-17/03/2016 16:47:25
  Past

  Surface Scan Test - 2

  Test started - 17/03/2016 16:47:25
        
  Finished test:-17/03/2016 16:48:58
  Past

  I also went in the BIOS BOOT MENU by pressing F12 at startup and ran diagnostics that seemed to have said everything going, however I saw a mistake, faliure in its process that was too fast for me to write the error.

  In a nutshell, my thought is that my hard drive has failed / is corrupted or is about to fail.

  My simple question is, do I need a new hard drive with the information I've provided?

  Thank you very much!

  To all those who read this topic:

  I rang Dell directly and they confirmed my hard drive needs to be replaced.

  8792 power over time, I think that its actually me good.

  Bravo and thanks for the reply ejn63

• error reported from the transport layer and the error description was impossible to extract

  Hi, can someone please explain how to get rid of the pop-up message when the computer starts up:
  error reported from the transport layer and the error description could not be found! the message has been lost
  Windows XP Virgin internet net gear wireless. I searched on the internet - nothing except suggestions, this is the internet
  connections but is not working okay I tried microsoft fix
  Thank you john

  Hi, I just started to use the hard drive that had the problem, it's still there. The problem is with the raid card. (no problem on other drives) In system config, starting there are two enteries: SATARAIDS and silcfg. I checked the SATARAIDS, rebooted

  missing message. I deleted all the files SATARAIDS and silcfg. my computer, properties, hardware - deleted. deleted the folder in program files. did a scan to remove any files or file fragments on the raid drivers. I did not know I had lefe the cd in the drive for the raid drivers I have in yesterday. I rebooted.
  after reboot, there not says found new hardware "raid card" perhaps because the disc was in the drive and it automatticly installed drivers. FIXED
  NO MORE ANNOYING MESSAGE