data 0x80070000D invalid code error

Similar Questions

• Http 404 file-907 Invalid COD error

  When I try to download the app OTA thr I am error gettting (error Http 404 invalid cod file-907), which only happens in the device of 4.6, but when I'm able to download thr OTA in 5.0 device and run it successfully.

  For compatibility, my App extends the JAR file, that has been compiled with OS 4.6 and it was Preverified and use in the application. The application opens on the version 5.0 device,

  If I test it in the 4.6 Simulator 9000 unit, it loads successfully, but in the 8520 device I get above described error, how can I find out the error?

  Concerning

  Rakesh Shankar.P

  Hi Mark,

  I found the nature of the error, there is no generation question not related, there is someproblem to the server, in which I write, so it's been the question, if I can access the build even after some time, it has installed successfully.

  Thank you

  Rakesh Shankar.P

• Get error "Failed to Downlaod 907 invalid COD file not found"

  Hello

  So I created an app for Blackberry and it works 100% in the Simulator... But when I try to copy the application on my physical device and install it using the .jad file, I get the error 'failure of Downlaod 907 invalid COD file not found' every time that... It won't install. But when I use the Blackberry "Rock FIle Manager" app and use its functionality of COD Installer application installs fine... Also, when I use the 'Create-A-JAD' program to create a .jad file from the file and then .cod file replace the build with the Create-A-JAD a .jad file and then install the app, it works...

  I used the software 6 SDK and my physical device is a Blackberry 9300 which is runnin OS6. My application is signed... Here is a link to an image that demonstrates that the app is signed... http://www.freeimagehosting.NET/ytoge

  What could be the problem so that it does not install it?

  Thank you very much!

  you could try to unpack cod (its actually a zip file that contains the subsidiary COD), maybe it helps.

• Nout of COD 404 invalid found error

  Hello. Deploying a project to a subdirectory / on a server, so the path to the files is www.myservername.com/downloads/ have 1 project downloads very well from there so seems mime types have been ok (text/vnd.sun.j2me.app-descriptor .jad / .cod application/vnd.rim.cod). but the other bombs 907 Invalid COD Http 404 not found error. It seems as if its going to work, in fact the apppears to do the download and then fails at the end... I don't know why the JAD file has references to other files of cod - I guess that the main cod file contains other somehow? The COD file is about 600 k not sure if it's a question of size? Is what I downloaded the JAD, JAR and COD file, all in the same directory. You can see in the file of what could be the problem? Tried by specifying the full path on the server and made no difference. These files have been removed and recompiled, so this isn't a previous question or the other problem. Do I need to split other these COD files? Is it still possible?

  RIM-COD-SHA1-4: d6 8 c f3 ec 1e a5 09 43 7B 3d c8 6 d 72 49 6 d 92 ab f2 07 90
  RIM-COD-SHA1-3: 6 f9 d 62 87 45 80 51 70 86 18 09 20 1 f0 b7 d8 92 12 b2 03 d
  RIM-COD-SHA1-2: 92 27 2 c d3 b8 ab b5 42 f4 c9 d0 c7 85 cf a9 bd 73 e7 38 db
  RIM-COD-URL-11: SecureLocate1gen - 11.cod
  RIM-COD-SHA1-1: f0 2d 44 5th 72 e1 0a f9 e7 62 a2 11 5 27 01 92 1e c7 72 5 c
  RIM-COD-URL-10: SecureLocate1gen - 10.cod
  RIM-MIDlet-flags-1: 1
  MIDlet-Jar-Size: 1154972
  MIDlet-name: SecureLocate1gen
  MIDlet-Jar-URL: SecureLocate1gen.jar
  Microedition-Configuration: CLDC-1. 1
  MIDlet-Description: assets of groups of Olive tracking application
  RIM-COD-URL-9: SecureLocate1gen - 9.cod
  RIM-COD-URL-8: SecureLocate1gen - 8.cod
  RIM-COD-URL-7: SecureLocate1gen - 7.cod
  RIM-MIDlet-Position-1: 1
  RIM-COD-Module-dependencies: net_rim_cldc, net_rim_bbapi_phone, net_rim_bbapi_invoke, net_rim_locationapi, net_rim_ui_extension, net_rim_os
  RIM-COD-URL-6: SecureLocate1gen - 6.cod
  RIM-COD-URL-5: SecureLocate1gen - 5.cod
  RIM-COD-URL-4: SecureLocate1gen - 4.cod
  RIM-COD-URL-3: SecureLocate1gen - 3.cod
  RIM-COD-URL-2: SecureLocate1gen - 2.cod
  RIM-COD-URL-1: SecureLocate1gen - 1.cod
  RIM-COD-size-9: 46564
  RIM-COD-size-8: 36152
  RIM-COD-size-7: 40224
  RIM-COD-size-6: 56824
  RIM-COD-size-5: 43568
  RIM-COD-size-4: 56608
  RIM-COD-size-3: 40196
  RIM-COD-Module-name: SecureLocate1gen
  RIM-COD-size-2: 51572
  RIM-COD-size-1: 66084
  RIM-COD-SHA1: 78 5b d3 be 29 70 77 78 00 34 67 1f 5f 07 19 22 e5 9f df 9f
  RIM-COD-size: 65052
  Microedition-profile: MIDP-2. 0
  RIM-COD-size-11: 45148
  RIM-COD-size-10: 49932
  MIDlet-vendor: Group of Olive
  MIDlet-1: SecureLocate,img/icons/default.png
  RIM-COD-URL: SecureLocate1gen.cod
  RIM-COD-SHA1-11: ff dd 9 a 35 92 and 92 0c d7 a8 bb c7 1A 0f 49 72 54 BC 7 b5 51
  RIM-COD-SHA1-10: ac 4 d 02 f3 a9 2f 16 55 11 0c 77 5th bb 8th c8 a2 a0 ba 12 59
  Manifest-Version: 1.0
  MIDlet-Version: 1.0.0
  RIM-COD-SHA1-9: d4 99 97 06 cf f6 22 24 72 af 45 ea 97 5b f8 d9 65 ba bf 3 c
  RIM-COD-SHA1-8: f1 d0 6a 8 c d1 fe 37 1 a 2 a 39 08 and 0 a 7 d 16 89 62 a7 c7 e4 of
  RIM-COD-SHA1-7: 17 bc 98 a7 44 74 e3 2d 86 b2 c9 07 b5 3d 52 2nd f1 8 d 8 c fd
  RIM-COD-SHA1-6: 0 6 b c c0 be 29 3B e9 db 99 77 43 91 36 02 fa e4 20 96 0e bc
  RIM-COD-creation-Time: 1311059905
  RIM-COD-SHA1-5: 8 c 04 b8 6th 3d 31 6 has 8 90 c c0 a4 c7 0f 3f 2f c1 fa 77 ac fc

  Do not deploy the original cod file, only those that you extracted.  The name of the first file extract you is the same as the original file that you check out of.  This means that you replaced any of the files with something invalid.

• Blackberry error: 907 invalid COD closed stream

  Hi I am trying to download the Blackberry application

  But when downloading after a certain time, it gives the error 907 invalid COD closed stream.

  What is the problem with this and the solution for it.

  I cleaned my browser cache and it worked for me.

• JVM 102 error: invalid code in filesystem

  Hello!

  I use BlackBerry JDE 4.6, when I'm trying to start the emulator, the emulator has successfully launched, but after awhile, I got the following description on the emulator screen, please help me...

  JVM 102 error

  Invalid code in filesystem

  Please help me-

  Thanks in advance...

  clean.bat run once, then restart.

• Error 907 invalid cod when the OTA

  Hello

  I have a problem with OTA Download on
  v4.1.0.268 (Platform 2.2.0.112).  BB 7250 on cdma network.
  It says Error 907 invalid cod

  the jar/jad/cod are created with JDE 4.6

  However, I can do OTA using BB 9000 download emulator with the same files / same url.

  I followed the diagnosis mentioned in
  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800708/800646/support...

  all sizes are correct in the jad file. I so should something specific to older devices BB when I deploy the applications of OTA?

  Here are the jad:

  Manifest-Version: 1.0
  RIM-COD-Module-name: TestSpeed
  RIM-COD-Module-dependencies: net_rim_cldc
  MIDlet-Jar-Size: 30100
  MIDlet-1:.
  RIM-COD-creation-Time: 1224023296
  MIDlet-Jar-URL: TestSpeed.jar
  RIM-COD-URL: TestSpeed.cod
  RIM-COD-SHA1: ef 3 b 05 31 and 21 a5 a7 9 d 3 c 4 c 6 c ed 6 d a6 bf 1B d3 a8 3f e0
  RIM-COD-size: 26200
  Microedition-Configuration: CLDC-1. 1
  MIDlet-Version: 0.0
  MIDlet-name: TestSpeed
  MIDlet-vendor:
  Microedition-profile: MIDP-2. 0
  RIM-MIDlet-flags-1: 0

  It's okay that APIs are used (the cod itself file format has changed along the way).  Please visit the following link.

  What is - an appropriate version of the BlackBerry JDE
  Article number: DB-00537

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800901/What_Is_-_Appr...

• Installation of the OTA for Storm: "907 invalid COD. "Error HTTP 404: not found.

  Installation of Storm OTA:

  -----------------------------------------------------------------------------------------------

  COD

  -----------------------------------------------------------------------------------------------

  My request 'abc' has a big .cod file and > 64 KB. I extracted and produced 6 .cod files.

  ABC. COD

  ABC - 1.cod

  ABC - 2.cod

  ABC - 3.cod

  ABC - 4.cod

  ABC - 5.cod > 64 K

  ABC - 5.cod is always larger than 64 KB

  -----------------------------------------------------------------------------------------------

  JAD

  -----------------------------------------------------------------------------------------------

  However abc.jad file has files of 7 cod enteries

  RIM-COD-URL-6: abc - 6.cod

  RIM-COD-URL-5: abc - 5.cod

  RIM-COD-URL-4: abc - 4.cod

  RIM-COD-URL-3: abc - 3.cod

  RIM-COD-URL-2: abc - 2.cod

  RIM-COD-URL-1: abc - 1.cod

  RIM-COD-URL: abc.cod

  When you download it gives me "907 invalid COD. "Error HTTP 404: not found" error.

  -----------------------------------------------------------------------------------------------

  I also tried deleting after 3 enteries of the .jad file.

  RIM-COD-URL-6:

  RIM-COD-SHA1-6:

  RIM-COD-size-6:

  But it still gives the same error.

  -----------------------------------------------------------------------------------------------

  Emergency assistance is required.

  Alhumdulillah

  Problem is solved

  Mistake I made was that I have not put the .zip file on the Web server that was originally the .cod > 64K file.

• AutoConfig error: ORA-12705: cannot access NLS data or invalid environment specified files

  Hi, experts:

  When it is run on the database layer, obtained adautocfg.sh

  ====

  ....

  Executable: /ap10/immted/db/tech_st/11.2.0.3/bin/sqlplus

  SQL * more: Production of liberation 11.2.0.3.0 Sat Jun 28 23:30:17 2014

  Copyright (c) 1982, 2011, Oracle.  All rights reserved.

  Enter the value 1: enter the value 2: enter the value 3: ERROR:

  ORA-12705: cannot access files of NLS data or invalid environment specified

  =====

  We have 12.1.3, 11.2.03 and Linux. I've issued $unset NLS_LANG, set ORA_NLS10 = "' in the .env file." What should I check?

  In the $ORACLE_HOME/appsutil/contextfile.xml the following:

  "s_db_oranls" = "unix" OSD > /ap10/immted/db/tech_st/11.2.0.3/nls/data/9idata < / ORA_NLS >

  Thanks and greetings

  Now, I got the same error when doing $sqlplus / as sysdba. $sqlplus/nolog is fine.

  Hello

  AutoConfig was successful before?

  Are there any recent book.

  If you're upgrading from 11.2.0.3 or recently updgraded to 11.2.0.3 database, then course do perofmed you listed in article - 7 for creating data 9i of the below TechNote MOS.

  Interoperability note Oracle EBS R12 with Oracle Database 11 g 2 (11.2.0.3) (Doc ID 1585578.1)

  See also below the TechNote if is not for 11.2.0.3 but his relevant:

  Upgrade 9i to 10 g 2 fails with ORA-12709: error loading creates characters of the base set (Doc ID 732861.1)

  Thank you

  A H E E R X

• Fatal Setup error code1327 E invalid drive error

  Hi, I uninstall the printer from my computer, everytime I needed to print a shhet of the document it was printing different 34 of something else I've had enough of him. Now try to install the software I have uninstall it in the first place. It promt "fatal error facility code error: 1327 invalid drive E then it showes me web site for me to research, 'fatal error' and"MSI '." selfinstallingportmonitor.  No idea what this means and can not find the problem. Please help thanks

  Hello

  Try the steps below and check if the problem persists.

  (a) click Start

  (b) select run

  (c) type Regedit

  (d) find the following registry key

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\ Explorer\User Shell Folders

  e) in the pane right - see if there are any entries which has a F or any other correspondence in addition C (your OS folder) change the data of C:\

  Note:
  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

• BlackBerry smartphones can not update AppWorld 907 invalid COD

  Hi guys. I bought my Torch 9800 (v6.0.0.570) in 2011 and so far the problem is still not resolved. Everytime I open the AppWorld

  -A message appears: "To continue to use Blackberry App World, you must upgrade your current version."

  - Then I download the update.

  Whenever the 99% achieved download bar, suddenly a message appears "907 invalid COD".

  I can't even delete my BB AppWorld. There is no option "Delete" in "Application Management" or "Modules".

  Hi Firdaus92

  In this case, it is advisable to upgrade the version of your operating system to the v6.0.0.756

  Search and download your OS and everything above applies

  By sdgardne 

   

  However, here's what I propose...

  The easiest way is, on a PC (you can not do on MAC):

  (1) make sure you have a current backup and your BB complete... you can find complete instructions via the link in my sig auto below. (It's probably debatable given the errors you have... it is likely that your data are already parts of your device, which means that you must now rely on a backup you took before that happened.)

  2) uninstall all the BB OS packages from your PC,

  (3) make sure you have the BB Desktop Software already installed

  • http://us.BlackBerry.com/software/desktop.html

  (4) download and install on your computer, the BB OS package you want:

  • http://us.BlackBerry.com/support/downloads/download_sites.jsp
  • If all you want are the levels of BONE, it is first sorted by carrier - the carrier supports, your search will be fast. However, some carriers are much slower than others to release updates. To really get the package up-to-date OS for your BB, you need to dig through and find all businesses that support your specific model BB and then compare the BONE levels they support.

  5) remove all copies of the SELLER on your PC. XML... There will be at least one and maybe 2, and they will be located in the same way or to (it changes based on your version of Windows) these files:

  • C:\Program Files (x 86) \Common Files\Research In Motion\AppLoader
  • C:\Users\(your Windows username) \AppData\Roaming\Research In Motion\BlackBerry\Loader XML

  6 (a) to change your level of BB OS installed (at level or lower), you can run the Desktop software and connect your BB... the software should offer the operating system package you have installed on your PC.

  6 (b) or, for recharging your BB OS level installed as well to change, work around the Desktop software and use the CHARGER. EXE directly, through step 2 in this process:

  • http://supportforums.BlackBerry.com/T5/BlackBerry-device-software/how-to-reload-your-operating-syste...
  • Note Although written to "recharge" and the storm, it can be used to upgrade, downgrade or recharge any BB device model - depends on the operating system package you download and install on your PC.

  If, during the process of 6a or 6 b, your BB has an error '507', simply unplug the USB of the BB cord and reinsert it. do nothing else... This should allow the installation to continue.

  You can also study the use of BBSAK (bbsak.org) to perform the wipe what he is capable.

  You can also try the "skeleton OS Reload procedure" in an attempt to circumscribe the precise causal element:

  1. Load your OS "bare bones"... If everything is optional, do not install it.
  2. If the behavior is immediately, then try another OS with step 1
  3. If the behavior does not immediately, then run for as long as necessary to make you to be sure that the behavior will not occur.
  4. Add one more thing - no matter how tempting, one.
  5. If the behavior does not immediately present, and then runs for long enough to be sure he won't have the same problem
  6. Repeat steps 4 and 5 until all things are responsible or the behavior presents

  When the behavior shows up, you know the culprit... the last thing you have loaded.

  If the behavior doesn't re-present, then you know that step 1 or 2 cured it.

  If the behavior has anything, then you have probably a problem of material level for which no amount of OS or software can heal.

  You may also use these tips:

  • KB10144 How to force detect the BlackBerry smartphone using the Application Loader
  • KB27956 How to recover a BlackBerry smartphone from any State
  • http://CrackBerry.com/BlackBerry-101-lecture-12-how-reload-operating-system-nuked-BlackBerry

  If you are on a MAC, you are limited to only your sanctioned carriers OS packages... but can still use any level they currently have to sanction. See this procedure:

  • KB19915 How to perform a clean reload of the smartphone BlackBerry using BlackBerry Desktop Software application software

  Good luck and let us know!

• Webloc changed Safari icons: code error-10823

  This morning when I turned on my Mac, I noticed that all my Safari webloc icons turned into another (basically @ sign and HTTP in the icon). When I right click the icon's default implementation "Simulator.app (9.2). By tradition, Simulator.app is part of Xcode. However, I've updated or use Xcode or any application that is part of Xcode in the past 2 weeks (approximately).

  Yes, ok, let's change the default application associated with "webloc" icons for Safari. Right-click. Default app for Safari. I get the error shows: "the element is locked or damaged, or in a folder you have not allowed to edit (code error-10823)."

  After removal of the dialog box, I get another dialog stating: " ""the operation cannot be completed. An unexpected error has occurred (code error-10823). »

  I have restart mode without failure. Same question. I can't find something on the code of error-10823 and on why a land I would get this message that the element is locked or damaged.

  Any ideas? Thank you.

  Mac mini end of 2012

  El Crap 10.11.3

  Although the problem is not the same, please follow the instructions in this article to support to reset the launch Services database. Instead of typing the shell command in the article, I suggest that you copy and paste the web page in the Terminal window. Make sure you only select the entire line. One way to do that is triple - click anywhere in the line.

  If you do not already have a current backup, back up all data before proceeding. You should perhaps log out or restart to see a change.

• Code error 8024002D

  My operating system is Windows 7 Professional 32-bit; an upgrade to Windows XP Edition family.  In addition to office 2007 Windows Update Office Genuine Advantage important Notifications (KB949810) update, installation failed repeatedly, Windows Update is up-to-date.  My anti-virus program is F-Prot for Windows and signature files are up-to-date.

  When installing a dialogue will appear asking:
  'Insert the disk "Notice 2.0.0048.0 OGA" and click OK' I don't have this drive.  When this dialogue is canceled the Windows Update poster window installation failed with error code 8024002D.

  A Google search on the code error 8024002D and a search of this forum led to perform an installation of this update.  I can't find the update in the MS Download Center to allow an attempt a manual installation.

  I would appreciate any advice on the steps needed to overcome this failure.

  Malcolm Walker

  Malcolm Walker

  Error code: 0x8024002D
  means - a full-file patch has failed because the source was necessary

  Why not see if place for Office installation media in the drive corrects the situation.

  TaurArian [MVP] 2005-2010 - Update Services

  TaurArian,

  Thank you for responding.  Good idea, but unfortunately without success.  The Windows Update Setup program could not find the file, and with a manual search OGSNotifier.msi does not seem to be on my Office 2007 installation disc.

  On the MS Website I found the OGAControl.cab file but could not work on how to install the INF file it contains.  However, from the Download Center, I reached the area of validation of the Genuine Advantage pages and facilities of my Windows 7 and Office 2007 validated successfully.

  So I hid the KB949810 update in the hope that it will be the end of this problem.

  Malcolm Walker

• I just bought a key code to update from microsoft for windows xp. When I enter the code is says I have an invalid code? can someone help me?

  I JUST BOUGHT a key code to update from microsoft for windows xp. When I enter the code is says I have an invalid code? can someone help me?

  Hello

  1. what exactly are you referring?
  2. Enter the code to upgrade the main code of the Office application or operating system?

  Follow the steps in this article.

  You receive an error message after you enter the product key when you try to install Windows XP
  http://support.Microsoft.com/kb/310637

• My Outlook Express XP does not open. "Cannot open the OE message store. Code error = 0x800703e6, 998

  It is now my Outlook Express to open. "Outlook Express could not be started. Could not open the OEMessage store. Code error = 0x800703e6, 998, Please HELP!

  Thank you

  In

  Hello, in

  This can be caused if the Outlook Express message store file is corrupted. I suggest that you rename the file and restart the computer to re-create the file.

  a. Click Start, go to my computer.

  b. navigate through locations

  C:\Windows\Application Data\Outlook Express\ {GUID}

  Or

  C:\Documents and Settings\Settings\Application Data\Identities\ {GUID} \Microsoft\Outlook Express

  c. right-click on the Folders.dbx file and then click Rename (copy and save this file to another location, in case of failure, you need to replace the original file.)

  d. type folders.old.

  e. launch Outlook Express. This creates a new Folders.dbx file.

  Thank you

  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.