Http 404 file-907 Invalid COD error

Similar Questions

• 907 invalid COD

  I am trying to install an application on the blacberry 8900 but I end up getting "907 invalid COD". I scoured the causes common to http://www.blackberry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800708/800646/Support... but none of them don't apply to me

  1. built using Netbeans which automatically updates all the attributes. Signed using a verisign code signing certificate.

  2A got the COD file that was signed using the Blackberry signature tool button.

  3 final file size of cod is 686 KB. There are 10 other files inside this parent COD cod.

  4 added the parent COD (686 KB) to the web server

  5. download the file by pointing Blackberry 8900 to the jad (I double/triple/quadraple verified I downloaded good jad)

  6. the jad download properly on the phone. Then I show a dialog by phone asking me to download the 686 K file. I click on the Download"" button.

  7. the blackberry handheld and then stop to think a bit... did something... I don't know what. Does not even start the progress bar indicator (However, I see a call to the Web server asking the parent jad only. No child COD file no is required app server logs).

  8. it is not any problem with the Web server mime types go because the Web server can serve other COD files to other phones (8330 for example) without problem.

  9. I do NOT use WAP browser to download. I use the regular BB browser.

  10. I also tried side loading via the USB cable. But I get the same error... However, with the sideloading, I get a little more information. Whereas the OTA just says "907 invalid COD". If I store the COD and jad on the SD card and try to load it from there, I get "907 invalid cod unable to import zip file. It was weird.

  11. then I try to unzip the parent COD, to take all 10 children COD files and put the 10 files with the file jad on the SD card. Then I try to install from SD card. Now I get "do not find the file 907 invalid cod.

  I'm confused as to what may cause this problem. What we can do to move apart from this problem? Any help would be appreciated. Everyone knows about similar problems? Is the size of the file, is the carrier, it is the phone, it's the browser... I'm lost.

  I was able to understand the reason. Have absolute URLS for RIM-COD-URL-xx instead of parent URLs seem to have solved the problem. For some reason any with the relative URL was causing a problem.

• Installation of the OTA for Storm: "907 invalid COD. "Error HTTP 404: not found.

  Installation of Storm OTA:

  -----------------------------------------------------------------------------------------------

  COD

  -----------------------------------------------------------------------------------------------

  My request 'abc' has a big .cod file and > 64 KB. I extracted and produced 6 .cod files.

  ABC. COD

  ABC - 1.cod

  ABC - 2.cod

  ABC - 3.cod

  ABC - 4.cod

  ABC - 5.cod > 64 K

  ABC - 5.cod is always larger than 64 KB

  -----------------------------------------------------------------------------------------------

  JAD

  -----------------------------------------------------------------------------------------------

  However abc.jad file has files of 7 cod enteries

  RIM-COD-URL-6: abc - 6.cod

  RIM-COD-URL-5: abc - 5.cod

  RIM-COD-URL-4: abc - 4.cod

  RIM-COD-URL-3: abc - 3.cod

  RIM-COD-URL-2: abc - 2.cod

  RIM-COD-URL-1: abc - 1.cod

  RIM-COD-URL: abc.cod

  When you download it gives me "907 invalid COD. "Error HTTP 404: not found" error.

  -----------------------------------------------------------------------------------------------

  I also tried deleting after 3 enteries of the .jad file.

  RIM-COD-URL-6:

  RIM-COD-SHA1-6:

  RIM-COD-size-6:

  But it still gives the same error.

  -----------------------------------------------------------------------------------------------

  Emergency assistance is required.

  Alhumdulillah

  Problem is solved

  Mistake I made was that I have not put the .zip file on the Web server that was originally the .cod > 64K file.

• Get error "Failed to Downlaod 907 invalid COD file not found"

  Hello

  So I created an app for Blackberry and it works 100% in the Simulator... But when I try to copy the application on my physical device and install it using the .jad file, I get the error 'failure of Downlaod 907 invalid COD file not found' every time that... It won't install. But when I use the Blackberry "Rock FIle Manager" app and use its functionality of COD Installer application installs fine... Also, when I use the 'Create-A-JAD' program to create a .jad file from the file and then .cod file replace the build with the Create-A-JAD a .jad file and then install the app, it works...

  I used the software 6 SDK and my physical device is a Blackberry 9300 which is runnin OS6. My application is signed... Here is a link to an image that demonstrates that the app is signed... http://www.freeimagehosting.NET/ytoge

  What could be the problem so that it does not install it?

  Thank you very much!

  you could try to unpack cod (its actually a zip file that contains the subsidiary COD), maybe it helps.

• Error 907 invalid cod when the OTA

  Hello

  I have a problem with OTA Download on
  v4.1.0.268 (Platform 2.2.0.112).  BB 7250 on cdma network.
  It says Error 907 invalid cod

  the jar/jad/cod are created with JDE 4.6

  However, I can do OTA using BB 9000 download emulator with the same files / same url.

  I followed the diagnosis mentioned in
  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800708/800646/support...

  all sizes are correct in the jad file. I so should something specific to older devices BB when I deploy the applications of OTA?

  Here are the jad:

  Manifest-Version: 1.0
  RIM-COD-Module-name: TestSpeed
  RIM-COD-Module-dependencies: net_rim_cldc
  MIDlet-Jar-Size: 30100
  MIDlet-1:.
  RIM-COD-creation-Time: 1224023296
  MIDlet-Jar-URL: TestSpeed.jar
  RIM-COD-URL: TestSpeed.cod
  RIM-COD-SHA1: ef 3 b 05 31 and 21 a5 a7 9 d 3 c 4 c 6 c ed 6 d a6 bf 1B d3 a8 3f e0
  RIM-COD-size: 26200
  Microedition-Configuration: CLDC-1. 1
  MIDlet-Version: 0.0
  MIDlet-name: TestSpeed
  MIDlet-vendor:
  Microedition-profile: MIDP-2. 0
  RIM-MIDlet-flags-1: 0

  It's okay that APIs are used (the cod itself file format has changed along the way).  Please visit the following link.

  What is - an appropriate version of the BlackBerry JDE
  Article number: DB-00537

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800901/What_Is_-_Appr...

• found 907 invalid cod file

  Hi all

  my application running in a simulator... but when I copy the .jad file and. file map media of cod and click file jad then following to come... 907 invalid cod not found file error message...

  Please give me the solution

  Thank you

  Hello

  The jad and cod are in the same directory?

  Looking for file jad if the url of your code file is correct.

  Cali

• Blackberry error: 907 invalid COD closed stream

  Hi I am trying to download the Blackberry application

  But when downloading after a certain time, it gives the error 907 invalid COD closed stream.

  What is the problem with this and the solution for it.

  I cleaned my browser cache and it worked for me.

• BlackBerry smartphones can not update AppWorld 907 invalid COD

  Hi guys. I bought my Torch 9800 (v6.0.0.570) in 2011 and so far the problem is still not resolved. Everytime I open the AppWorld

  -A message appears: "To continue to use Blackberry App World, you must upgrade your current version."

  - Then I download the update.

  Whenever the 99% achieved download bar, suddenly a message appears "907 invalid COD".

  I can't even delete my BB AppWorld. There is no option "Delete" in "Application Management" or "Modules".

  Hi Firdaus92

  In this case, it is advisable to upgrade the version of your operating system to the v6.0.0.756

  Search and download your OS and everything above applies

  By sdgardne 

   

  However, here's what I propose...

  The easiest way is, on a PC (you can not do on MAC):

  (1) make sure you have a current backup and your BB complete... you can find complete instructions via the link in my sig auto below. (It's probably debatable given the errors you have... it is likely that your data are already parts of your device, which means that you must now rely on a backup you took before that happened.)

  2) uninstall all the BB OS packages from your PC,

  (3) make sure you have the BB Desktop Software already installed

  • http://us.BlackBerry.com/software/desktop.html

  (4) download and install on your computer, the BB OS package you want:

  • http://us.BlackBerry.com/support/downloads/download_sites.jsp
  • If all you want are the levels of BONE, it is first sorted by carrier - the carrier supports, your search will be fast. However, some carriers are much slower than others to release updates. To really get the package up-to-date OS for your BB, you need to dig through and find all businesses that support your specific model BB and then compare the BONE levels they support.

  5) remove all copies of the SELLER on your PC. XML... There will be at least one and maybe 2, and they will be located in the same way or to (it changes based on your version of Windows) these files:

  • C:\Program Files (x 86) \Common Files\Research In Motion\AppLoader
  • C:\Users\(your Windows username) \AppData\Roaming\Research In Motion\BlackBerry\Loader XML

  6 (a) to change your level of BB OS installed (at level or lower), you can run the Desktop software and connect your BB... the software should offer the operating system package you have installed on your PC.

  6 (b) or, for recharging your BB OS level installed as well to change, work around the Desktop software and use the CHARGER. EXE directly, through step 2 in this process:

  • http://supportforums.BlackBerry.com/T5/BlackBerry-device-software/how-to-reload-your-operating-syste...
  • Note Although written to "recharge" and the storm, it can be used to upgrade, downgrade or recharge any BB device model - depends on the operating system package you download and install on your PC.

  If, during the process of 6a or 6 b, your BB has an error '507', simply unplug the USB of the BB cord and reinsert it. do nothing else... This should allow the installation to continue.

  You can also study the use of BBSAK (bbsak.org) to perform the wipe what he is capable.

  You can also try the "skeleton OS Reload procedure" in an attempt to circumscribe the precise causal element:

  1. Load your OS "bare bones"... If everything is optional, do not install it.
  2. If the behavior is immediately, then try another OS with step 1
  3. If the behavior does not immediately, then run for as long as necessary to make you to be sure that the behavior will not occur.
  4. Add one more thing - no matter how tempting, one.
  5. If the behavior does not immediately present, and then runs for long enough to be sure he won't have the same problem
  6. Repeat steps 4 and 5 until all things are responsible or the behavior presents

  When the behavior shows up, you know the culprit... the last thing you have loaded.

  If the behavior doesn't re-present, then you know that step 1 or 2 cured it.

  If the behavior has anything, then you have probably a problem of material level for which no amount of OS or software can heal.

  You may also use these tips:

  • KB10144 How to force detect the BlackBerry smartphone using the Application Loader
  • KB27956 How to recover a BlackBerry smartphone from any State
  • http://CrackBerry.com/BlackBerry-101-lecture-12-how-reload-operating-system-nuked-BlackBerry

  If you are on a MAC, you are limited to only your sanctioned carriers OS packages... but can still use any level they currently have to sanction. See this procedure:

  • KB19915 How to perform a clean reload of the smartphone BlackBerry using BlackBerry Desktop Software application software

  Good luck and let us know!

• 907 invalid cod exceeded the limit of the number of OS 5 bytes

  Hello

  I do face-down issue with jad installation from a Web server. I put all my files of cod with a jad file in our weserver. and appealed to the jad file. After a few seconds, the message as below. The same thing works with phone OS 6 version, but not with the OS 5

  907 invalid cod exceeded the limit of the number of bytes

  Thank you

  RAM

  If you are testing on simulators on the same PC running the same MDS Simulator, the article on connection limits may apply.

  Sorry beat me to it, I've never had the OS 5.0 browser throw up his hands on a download I created it, that the OS 6.0 browser was fine with.  The size of your files is not huge.

  If you really want to count the MDS Simulator out run, start the WiFi on the 5.0 OS simulator (manage connections--> set up the Wi - Fi network, you follow the nose, and then start the WiFi on the device), then change the configuration of the default browser (--> Advanced--> browser Options) in the Hotspot browser.  Stop the MDS Simulator and see if you can still browse.  Then, try the download again.

• 907 invalid COD: HTTP 404 error: not found

  Argh.  I've been messing around with some .wav files, including in my application and I got 907 errors.  Now, I have removed the .wav files and returned to what I had working perfectly last week... and I get this error message.  Can anyone spot the problem... This _was_ work:

  Manifest-Version: 1.0
  RIM-COD-Module-Name: Tracker
  RIM-MIDlet-Position-1: 1
  RIM-COD-Module-Dependencies: net_rim_cldc,net_rim_locationapi,net_rim_bbapi_invoke
  MIDlet-Jar-Size: 23776
  MIDlet-1: ,,
  RIM-COD-Creation-Time: 1217855394
  MIDlet-Jar-URL: Tracker.jar
  RIM-COD-URL: Tracker.cod
  RIM-COD-SHA1: c3 bd fb 96 5d a3 f5 1e 8d 84 5e 70 40 fd fc 4f 72 7c 15 d9
  RIM-COD-Size: 27104
  MicroEdition-Configuration: CLDC-1.1
  MIDlet-Version: 1.0.0
  MIDlet-Name: Tracker
  MIDlet-Vendor: AVendorName
  MicroEdition-Profile: MIDP-2.0
  RIM-MIDlet-Flags-1: 0
  

  We their normally just bundle the application as a file included.  You can add them to the project as a file in the jde will right clicking the project and selecting Add the file to the project.  If you use alternative building method, you can do so by including them in your jar of entry for CAP.  You can then access their call of .getResourceAsStream (resourcePath); on any class to search for a file.  There is an article in the knowledge base on it.

  If this causes problems of size of module, you may need to create some kind of resource downloader that saves your files to disc using JSR - 175 or storage of content after downloading the application successfully.

• OTA download fails to halfway through, Error 907 invalid cod

  Hey all, trying to get my application configured via the site, I downloaded cod of the child and the jad file and try to upload. Download pushing me, I say Yes and it starts but then it gets an error at a random in the download time as if maybe the cod that a child is not valid? Sometimes, the error immediately, sometimes after almost finished, thanks for any info or advice.

  To remove a possible cause of this error, remove your app from the target phone before installing.

  There is usually a button detail associated with this error - what does say?

  Have you looked through the many 907 threads on the forum of ideas?

• BlackBerry Smartphones 907 invalid COD

  Can someone tell me what this error message?  I try to download the Sirius/XM app and get this message.

  Your download source has been removed or deleted the cod files required for installation.

  In other words, not good... will not work.

• data 0x80070000D invalid code error

  I bought my computer HP Pavilion Elite 91801 at Future Shop - they set up the system and installed Vista.  I also got the news to
  ask for free update to Windows 7 Vista.  I received the disks in the mail from Windows 7 Upgrade program in Louiseville, Kentucky and installed
  It me when received.  I can't remember the exact date, but it was a day early2011.  Suddenly, the last week of June 1, 2013, I'm
  the windows do not enable error and the 0x80070000D - data is not a valid error code.  I have absolutely no idea why this message is received at this late date.  Looking for my programs, I see there was an automatic update - I wonder if this is what could be
  the origin of the problem.  Regardless, it's makes me crazy, because I feel that I continue to do all this than suggested and I keep going in circles.  Can someone help me please?  Thank you!

  Hi Weezie,

  Thanks for the reply and happy to know that the problem has been resolved.

  If you have problems with Windows in the future, please do not hesitate to post in the Microsoft Community Forums and we will be happy to help you.

• Nout of COD 404 invalid found error

  Hello. Deploying a project to a subdirectory / on a server, so the path to the files is www.myservername.com/downloads/ have 1 project downloads very well from there so seems mime types have been ok (text/vnd.sun.j2me.app-descriptor .jad / .cod application/vnd.rim.cod). but the other bombs 907 Invalid COD Http 404 not found error. It seems as if its going to work, in fact the apppears to do the download and then fails at the end... I don't know why the JAD file has references to other files of cod - I guess that the main cod file contains other somehow? The COD file is about 600 k not sure if it's a question of size? Is what I downloaded the JAD, JAR and COD file, all in the same directory. You can see in the file of what could be the problem? Tried by specifying the full path on the server and made no difference. These files have been removed and recompiled, so this isn't a previous question or the other problem. Do I need to split other these COD files? Is it still possible?

  RIM-COD-SHA1-4: d6 8 c f3 ec 1e a5 09 43 7B 3d c8 6 d 72 49 6 d 92 ab f2 07 90
  RIM-COD-SHA1-3: 6 f9 d 62 87 45 80 51 70 86 18 09 20 1 f0 b7 d8 92 12 b2 03 d
  RIM-COD-SHA1-2: 92 27 2 c d3 b8 ab b5 42 f4 c9 d0 c7 85 cf a9 bd 73 e7 38 db
  RIM-COD-URL-11: SecureLocate1gen - 11.cod
  RIM-COD-SHA1-1: f0 2d 44 5th 72 e1 0a f9 e7 62 a2 11 5 27 01 92 1e c7 72 5 c
  RIM-COD-URL-10: SecureLocate1gen - 10.cod
  RIM-MIDlet-flags-1: 1
  MIDlet-Jar-Size: 1154972
  MIDlet-name: SecureLocate1gen
  MIDlet-Jar-URL: SecureLocate1gen.jar
  Microedition-Configuration: CLDC-1. 1
  MIDlet-Description: assets of groups of Olive tracking application
  RIM-COD-URL-9: SecureLocate1gen - 9.cod
  RIM-COD-URL-8: SecureLocate1gen - 8.cod
  RIM-COD-URL-7: SecureLocate1gen - 7.cod
  RIM-MIDlet-Position-1: 1
  RIM-COD-Module-dependencies: net_rim_cldc, net_rim_bbapi_phone, net_rim_bbapi_invoke, net_rim_locationapi, net_rim_ui_extension, net_rim_os
  RIM-COD-URL-6: SecureLocate1gen - 6.cod
  RIM-COD-URL-5: SecureLocate1gen - 5.cod
  RIM-COD-URL-4: SecureLocate1gen - 4.cod
  RIM-COD-URL-3: SecureLocate1gen - 3.cod
  RIM-COD-URL-2: SecureLocate1gen - 2.cod
  RIM-COD-URL-1: SecureLocate1gen - 1.cod
  RIM-COD-size-9: 46564
  RIM-COD-size-8: 36152
  RIM-COD-size-7: 40224
  RIM-COD-size-6: 56824
  RIM-COD-size-5: 43568
  RIM-COD-size-4: 56608
  RIM-COD-size-3: 40196
  RIM-COD-Module-name: SecureLocate1gen
  RIM-COD-size-2: 51572
  RIM-COD-size-1: 66084
  RIM-COD-SHA1: 78 5b d3 be 29 70 77 78 00 34 67 1f 5f 07 19 22 e5 9f df 9f
  RIM-COD-size: 65052
  Microedition-profile: MIDP-2. 0
  RIM-COD-size-11: 45148
  RIM-COD-size-10: 49932
  MIDlet-vendor: Group of Olive
  MIDlet-1: SecureLocate,img/icons/default.png
  RIM-COD-URL: SecureLocate1gen.cod
  RIM-COD-SHA1-11: ff dd 9 a 35 92 and 92 0c d7 a8 bb c7 1A 0f 49 72 54 BC 7 b5 51
  RIM-COD-SHA1-10: ac 4 d 02 f3 a9 2f 16 55 11 0c 77 5th bb 8th c8 a2 a0 ba 12 59
  Manifest-Version: 1.0
  MIDlet-Version: 1.0.0
  RIM-COD-SHA1-9: d4 99 97 06 cf f6 22 24 72 af 45 ea 97 5b f8 d9 65 ba bf 3 c
  RIM-COD-SHA1-8: f1 d0 6a 8 c d1 fe 37 1 a 2 a 39 08 and 0 a 7 d 16 89 62 a7 c7 e4 of
  RIM-COD-SHA1-7: 17 bc 98 a7 44 74 e3 2d 86 b2 c9 07 b5 3d 52 2nd f1 8 d 8 c fd
  RIM-COD-SHA1-6: 0 6 b c c0 be 29 3B e9 db 99 77 43 91 36 02 fa e4 20 96 0e bc
  RIM-COD-creation-Time: 1311059905
  RIM-COD-SHA1-5: 8 c 04 b8 6th 3d 31 6 has 8 90 c c0 a4 c7 0f 3f 2f c1 fa 77 ac fc

  Do not deploy the original cod file, only those that you extracted.  The name of the first file extract you is the same as the original file that you check out of.  This means that you replaced any of the files with something invalid.

• Error HTTP 404 with Dreamweaver code

  Hello

  Can anyone understand this?

  HTTP 404 File not found error code. Here are a few possible reasons for the problem:

  (1) there is no server running on the server test. (2) the testing server specified for this site is not mapped to the URL http://www.explainervideocost.com/_mmServerScripts/MMHTTPDB.php . Check that the URL prefix corresponds to the root of the site.

  I can't get any further to connect to my xampp server and mySQL database.

  Dreamweaver seems to be the only one having problems. It is not the host of the site or the MySQL database. Is Dreamweaver. I tried this in CS5.5 and CS6 and get the same error message in both. What should I do? How can I solve this problem? Site Ref: EAPN video cost

  Thank you

  -Steve

  A local test server should point to your localhost, not in the domain of your Web site.  See screenshots.

  

  Your settings will look like this:

  Test server

  Local/network

  C:\xampp\htdocs\yourSiteName

  http://localhost/youSiteName/

  Advanced:

  

  Final:

  

  All that being said, you should not use DW with a WordPress site, except to change a child theme.  And for that we need good coding in PHP, HTML and CSS skills.  More practical knowledge of how WP Themes work and how to modify them properly so not to break the site.

  Nancy O.